I said that Windows update to download all updates, but let me choose when to install them.
I asked the question "I said that Windows update to download all updates, but let me choose when to install them."
I thought that my problem was resolved, but the problem is still ongoing.
The link to my previous question and answers is http://social.answers.microsoft.com/Forums/en-US/user/threads?user=Stew1957
Please help, what else can be tried.
PS I have since uninstalled MSE and installed Norton Antivirus 2011
1. my hard drive has been formatted and re loaded from scratch.
2. my opperating sytem is 32 Bit Win 7.
Thanks stew
To avoid confusion, please report all further follow-up replies to your original thread, stew: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3aeb2786-6fee-46e8-9d30-f54e1143a9e1
Thank you!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Tags: Windows
Similar Questions
-
Windows Update often wants to restart the computer after an update. If you say "not now" (or ignore?), he will later pop up a question "reboot now?" in a bubble of task bar. INCREDIBLY, it will at that time take keyboard focus of everything that happens and then accept what he gets as a response from the user. This means that if the user was in the middle of typing something, the following sequence of keys will enter the bubble "you want to restart" instead of some request the user was in the middle of the help. It's very bad.
Here is what just happened to me. I was in the middle of typing a document when the keyboard focus was suddenly taken by the issue of recovery, a fraction of a second later, the following combination of keys, he disappeared - I have no idea what hit it. Fortunately, I saw the flash and guess what had happened and quickly you press 'save' on my request. A few seconds later, my application has been closed as the machine restarted.
I think that the bubble of Windows Update SHOULD NOT STEAL the KEYBOARD FOCUS. I think it's dangerous and bad design.
What is the best way to communicate this suggestion to the team of Windows Update?
Is there a setting to stop Windows Update to do this? (Stop stealing keyboard focus)
I use Vista Home Premium
I'm looking for a Microsoft solution for the specific problem I described, and/or advice on where post for better attention to Microsoft to "design problem".
None of us are obstruction you. If we knew a way to avoid this problem (problem), we would have mentioned it earlier in this thread.
You aren't the first person to complain about this and I'm sure you won't be the last. According to Microsoft, you have two options:
1 use an automatic updates setting other Automatic (for example, download updates but let me choose whether to install them). or...
2. turn off the automatic updates and get your updates manually (which I don't recommend).
See...
Windows Update for Windows Vista Help
http://www.Microsoft.com/Windows/downloads/windowsupdate/learn/windowsvista.mspx~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Having a problem with the update of the window. He said that windows could not search for new updates. It's the found error 80245003 code
Take a look at this article as it addresses this error code. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows 7 Edition Home Premium. After that windows update will in a reboot loop
Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates
Hi pbmass,
I want to clarify if you are able to start the computer on the desktop after the system restore.
Follow the steps mentioned below and then try to install the updates manually
Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Step 2: Run the fixit available in the link below to reset windows update components.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Step 3: Disable the security software; Follow the steps mentioned in the link below
Disable antivirus software
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important: Activate security software once everything is done.
Step 4: Download the update manually and then install them
The .NET Framework 4 Client Profile is available on Windows Update
http://support.Microsoft.com/kb/982670
Description of the update for Silverlight:
http://support.Microsoft.com/kb/982926
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows Update lists an important update, but I get error when downloading it. I ran update readiness tool and two logs in Windows\logs appear no error at all and nothing fixed. The update that will not download is KB974332, which can solve some problems I encounter. What else can be done, or should I ignore this update?
Just upgraded to Win7 64-bit, Vista 64 - bit Edition Ultimate Home premium.Hello
Welcome to the Microsoft Vista answers Forum!
We would like to ask you some questions to help us focus on the right place.
(a) what is the error that you receive on the computer?
(b) since when you are facing this problem?
You can try the steps below and check if the problem is resolved.
Note: this problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and look for the number.
You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.
How to reset the Windows Update components?
http://support.Microsoft.com/default.aspx/KB/971058
Also, visit the following link for more reference on the particular update.
http://support.Microsoft.com/kb/974332
Hope this information is useful.
Thank you, and in what concerns:
Suresh Kumar-Microsoft Support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.
-
I think that Windows Update tries to install an update that I don't need me
Update of Windows on the computer, I'll put in place says that this important update is available:
KB2699988 - a security update Cumulative for Internet Explorer 7 for Windows Vista for x 64 systems.
When I try to install from Windows update I get this error:
«Some updates have not been installed - failed: 1 update.» Error (s) found: Code 8007371 C - Windows Update encountered an unknown error.
It then provides a link to "Get help with this error" which takes you to a page of results from help and Support Windows. No listed results mention a C 8007371 error, but one of them is "Resolve problems with installing updates" I click on that one.The upper part of advertising Microsoft 'Fix - it' for "automatically diagnose and fix common problems with Windows Update. I have try this. The file runs and I select "detect problems and patch for me (recommended) - with a single click, we detect problems AND apply the patches on this machine" at the end of its run, the program informs me that "Troubleshooting is complete. He listed under 'Problems found', "components Windows Update must be repaired", followed by 'Fix the status - set' and a happy green check mark. For those interested, here are the details of the report:
Windows Update
Problems found-
Windows Update components need to be repaired - fixed
Fix the Windows Update components - successful
Checked - questions
Update Windows by default data locations have changed - verifiedProblems found
Windows Update components need to be repaired - fixed
One or more componetes Windows Update is configured incorrectlyVerified issues
Update Windows by default data locations have changed - verified
The location where Windows Update stores data has changed and needs to be repairedI then press 'next' and indicate that I do not know if my problem is solved or not among the options "yes/no./i don't know." The window changes, and informs me that insofar as Windows Update will "no problems need attention" with another icon of happy green check mark. A good time to check if the patch can be installed again!
I try from Windows update - fails with an error C 8007371
Restart and try again - fails with an error C 8007371So, I decide to try to download the file directly from microsoft and bypass the Windows Update mechanism
Downloaded KB2699988 from Microsoft.
Tried to install it in the 'normal' windows desktop: come to the last part of the green bar and then I get:
"Some updates were not installed - the following updates don't have not been installed: security for Windows Update (KB2699988).Tried again to install the SafeMode file. Had this error:
Setup Windows Update Standalone - Setup has encountered an error: 0x8007043c. This service cannot be started in Mode safe.Went on the forums and then I tried these challenges listed as possible solutions to this problem:
1 ran the System File Checker scan according to the http://support.microsoft.com/kb/936212. He returned a value of "Windows Resource Protection has not found any breach of integrity."
2. http://support.microsoft.com/kb/936212 (2nd half of the page) listed by using the System Restore tool to move to another point in time. I have all the old points system, restore, so this isn't an option for me.
3. clean start up the PC and then ran Windows Update according to the http://support.microsoft.com/kb/929135: essentially the same as before. However, to stop all services, and then restart the Windows Update service, I tried, once again, to install the stand-alone Installer KB2699988 (file name of this file, for your benefit is .msu Windows6. 0 -KB2699988 - x 64). After the execution of this file, this message will appear: "Setup Windows Update Standalone - the update doesn't not apply to your system" OK is my only option here.So now the leaves wondering if this necessary update is really necessary at all. Why Windows Update says that I need this file which is not even for my computer?
It is a specific consumer support forum. You will find support for Vista forums in these IT Pro-online http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro
REPOST...
The computer in question must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All business & personal data (e.g., banking online & credit card passwords) are to be considered at risk, if not already compromised.
-
Check and fix the completed transaction. All of the files and registry keys listed in this operation were repaired successfully. But I'm not able to upgrade windows (KB2686827) and (KB2656368). Its keep telling me that Windows Update encountered an unknown error. 641, the code Please HELP. I have Windows Vista Home Premium 32 bit. Thanks in advance.
Original title: of my CBS.log
Try the manual download for both method:
-
Blue screen 116 every time that Windows updates
original title: 116 every time that Windows Update BSOD
OK, so I'm in a bad mood, so this will be brief. I managed to understand I get BSOD every time I update my graphics driver, and I have no idea what kind of card I because it is a company built PC (never buy Dells) and the owner of this PC (that is to say my father and family) reinstalled Windows compeletly before I could look, so all I have is "Standard VGA Graphics Adapter" in the Device Manager. Try to manually update the drivers causing the BSOD once I chose to run windows normally (it runs in safe mode now too, which is of course the pre reinstall improved)
So I don't really know what to do at this point.
Hello
Dell can tell you what the graphics device in the computer is so check with their support, their online
documentation and drivers and ask in the Dell forums for known issues. Check the model number
of your computer on the Dell Site for drivers - it should indicate the appropriate driver.Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/
========The fact that it BlueScreens when you try to update the driver could indicate there is something wrong
with the video device. Because it has a "Standard VGA adapter' this means that the driver does not load.I hope this helps.
Rob Brown - Microsoft MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?
Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.
That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).
Good luck!
=======================
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Creative Cloud Desktop said that there is a download error when I open the applications tab. I tried the button Reload Applications with no luck. Any ideas?
John has provided all of the above resolution, could follow please this new https://helpx.adobe.com/creative-cloud/kb/Download-error-apps-tab.html
In the case where you do not succeed please contact support.
Concerning
Stéphane
-
After that Windows update restarted as requested, by getting only now white screen
After that Windows update restarted as requested, by getting only now white screen.
Unable to set up windows
I was able to boot in safe mode and restore that updated windows. Then found that the monitor is released. Again, everything is good
-
Ive been using Premiere Pro, After Effects and Photoshop for a while now with creative cloud, but since I've updated the 2015 After effects version, it is said that it is a trail version? But when I go on the creative menu cloud and look at apps it just said up to date, any ideas on this?
Hello Cam,
Please check the help below document:
Applications creative Cloud back in test mode after an update until 2015 for CC
Kind regards
Sheena
-
Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d
the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song
Thanks for any help
Hi, Pantha9,
What version of Windows are you using?
Start > right click on computer and select Manage
Select Device Manager
Click on the + next to sound, video and game controllers
Right-click on the driver and select uninstall
Restart the computer and Windows will reload the driver
New attempt of his
Access the site of the factory and search for driver updates
-
I bought a new camera with a disc of Adobe Photoshop Lightroom 5. I have a pc with windows 8.1 windows. I downloaded and deleted about 5 times. It says installed properly, but whenever I hit the icon the pc hangs and I have to restart AID
Uninstall your lr 5.
install lr 5.7.1 and use your serial number to activate.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7.1. 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5.5, 5 | 1
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
APP said file is updated, but it is not installed on the computer (has been removed because it does word not running). Now, I can't update or download!
Office CC lists the applications as "up to date" when they are not
-http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
Maybe you are looking for
-
Unable to connect to the App/iTune stores
Since the 10 update on my iPhone iOS 6s; When I try to open the App Store or iTunes Store, it says "unable to connect". If I'm real quick when I open the App Store I can successfully hit a button update B4 I get the Error Message. It tries to open
-
I want to do a VI for the purpose of inspection using Labview 8.6.I am a beginner and I want to know what is meant by session in 'Vbai open inspection'...?I use a usb for aquistion camera!
-
I have a problem with the Access Manager and I would like to get rid of it, I can't find it anywhere on my computer so I can't change settings
-
Control/sleep of PL/SQL loop works only for expected less than 90 minutes
Hi allI was wondering could someone help me. I've written a procedure that checks to see if a condition is true, and if it ends successfully. If the condition is not true he sleeps for a minute and then try again. If a time-out value is filled the pr
-
Installing Master Collection CS6 on Microsoft Surface 4 Pro?
What would be the best way to do this?What I have to load my old CS5.5 MC of the disk and work on getting the updates as I did it on my desktop?Or I can download it all at once.Any advice would be appreciated.Vince