I spilled liquid on my G6 Pavilion and the video card no longer works

Similar Questions

• The Panel and the desktop shortcuts no longer work after the virus

  Originla title: shortcuts does not.

  The Panel and the desktop shortcuts no longer work!  I had other users on my computer and maybe a user to a virus?  I can open programs, but must do so by opening a file written by the program (for example, to open a Word file to get term; to open TaxCut to Taxcut) can anyone help?  (Uses can I have XP Home Edition.)  I tried the system recovery, but that has not fixed the problem!

  Hello

  · What is the number and the model of the computer?

  · You have security software installed on the computer?

  · What happens when you try to open the files?

  · You receive an error message or error code?

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Satellite A210 - 10 c and Win7 - SD card no longer works

  Hello, I have a question. Maybe someone has a solution to the following problem:

  I have the model Toshiba A210 - 10 c. I replaced the RAM to 4 GB and now run a vanilla install of Windows7 ultimate 64-bit. System works now very fast and reliable. The only problem is that the SD card is not detected. Does anyone know where to find the driver for Windows 7 64 bit for it. I probably only go back to 32-bit SW more just to get a pilot. A driver for a newer model would work?

  Thanks for your comments - Rainer

  Hello

  Is the card reader for SD card, already recognized in the device properly Manager?

  I can understand you without downgrading to Vista 32 bit is no option for you because you need an OS 64-bit for the use of all 4 GB of RAM.

  But not don t worry, you should try the 64 bit Vista driver as Timox wrote. Usually the Vista drivers also work on Windows 7. If not, you can try Windows 7 64 bit to another laptop as Satellite A300 model. It should also work on your model. :)

• FS2004: When I'm at the airport of CYYZ and while that video card no longer works and it gets.

  OK, here's what happens to me at the moment and it makes me already started.

  When I play Flight Simulator 2004 and when I'm at CYYZ or other airports, such as landing or taxiing at the airport like a few minutes, whenever my video no longer works and it retrieves.

  Here is what I did to solve the problem but no results

  • Reinstalled FS2004
  • I have no Add on secernys or something else
  • Tried to lower the settings to min.
  • Updated the FS2004 to 9.1
  Here are my PC specs
  Dell Inpirson 530
  Windows 7 32-bit home
  2.40 GHz Intel Core 2 Duo
  254 MB video, ATI Radeon 2400 or 2600 XT HD (not sure)
  3 GB RAM
  Y at - it something I can fix this, I really hope that if I can fly again.

  Hello Vansers,

  1 have you tried the steps proposed in the above items to solve this problem?

  The link given in the lower part is to bind to the Flight Simulator community to post your question there. The link worked when I tried to open. However, I post the link once more. Here is the link:

  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.simulators&mid=2b49ddf8-e33d-4a09-8427-89e003df2878

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• All usb ports not working does not correctly and the video card are not available with DVI cable

  I recently had a power surge and now none of my usb ports are usable, and I had to switch to analog cable to use my monito., also using the beside picture dvi hdmi cable sparkles.   The Device Manager shows everything works and the appropriate drivers are installed. IM using windows 7 with an asus motherboard P5nesli. IM pretty computer savy but it left me speechless. Cannot connect wireless mouse or keyboard, camera, printer, etc.  truble shooter says that it detects problems but wont tell me what they are and can't fix. Help... Thank you

  Hello

  What is the brand and model of the computer?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Uninstall all the USB controllers, download the latest USB driver on the computer manufacturer site, install on your computer and check the status of the issue.

  Remove and reinstall all USB controllers.

  a. to remove and reinstall all USB controllers, follow these steps:

  b. Click Start, run, type sysdm.cpl in the Open box and then click OK.

  c. click on the Hardware tab.

  d. click the Device Manager button.

  e. expand Bus USB controllers.

  f. right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  g. restart the computer and reinstall the USB controllers.

  h. connect the removable USB storage device and perform a test to ensure that the problem is solved.

  Method 3:

  Update your drivers chipset system to the manufacturer's website and check the status of the issue.

• SideWinder X 8 right click the button and the scroll button no longer works

  the scroll button works more out of nowhere and shortly after also the button right of the mouse has stopped working, is in any way I could fix it? I tried to reinstall the software for this, after the scroll button does not, which did not help.

  Hello

  1. it works on another computer?

  I suggest you to follow the steps from the link below and check if it helps.

  Method 1:  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/nl-BE/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 2:  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  Hope this information is useful.

• power supply and the video card update

  Hi im planning on getting a cx600 power watt corsair and a sapphire radeon hd 6870, but I want to fit the PSU. I have a h8 hpe - 1240t. also, I hear the 6870 is 10.5 in and want to ask if my big enough to put in this big computer card. Thank you

  Hello

  Go with the card XFX 6870 that I quoted above, because it is an easier installation and it has 2 GB of memory frame buffer.

• Microsoft Visual Studio 2010 trial version has expired and the product key no longer works

  Hey I'm just tring to update the code of my Microsoft Visual Studio 2010 (not express) and I got the code BMJJC-MR3JJ-PH49G-9VB2Q-6FBQ3 and copy and pasted into the box but he stated that "this product key not allows to extend the use of this product" so I'mkind stuck in there, the version I use is the 90 day trial version could help me with this?

  After your problem to the forum Visual Studio listed below link, they may be able to help.

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  J W Stuart: http://www.pagestart.com

• HP pavilion dv6 6199ee video card does not work on windows 8

  Please help, I have a problem with the video card, it is always installed with error only on windows 8, but it works very well on windows 7, by the way I use the same driver in both!

  Hello

  If the graphics card in your laptop is AMD you can try this driver

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-112999-1

• SR2180NX adding memory and a video card, how?

  I finally decided to do a upgrade to my PC but I pushed my brain batty, trying to figure out how I would add memory and if I should update my video card now cause my Sims 2 game, instead of smooth running, it runs a little rough and frame by frame. Very annoying. I also want the Sims 3 to be able to run on my computer, I hope I can get it all done before they release.
  I have windows vista Home premium, and I have a PC I did not do anything for her, so it's a bit as if it was from the factory around a few programs of vanilla.
  
  * Manufacturer * Compaq Presario
  * Product * RK548AA-ABA SR2180NX
  Total number of logical CPUS * 2
  Total physical memory * 1.00 GB
  Total number of optical drives * 1
  Total number of disks hard * 1
  Total number of video cards * 1

  * Memory *.
  ------------------------------------------------------------------------------
  * System memory * total physical memory * 1.00 GB
  * Free physical memory * 443,21 MB
  Total virtual memory * 2.00 GB
  * Free up virtual memory * 1.94 GB
  * Page file space * 2.24 GB
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * 512 MB DDR2 - SDRAM (PC2-4200 / PC2-4300 / 533 MHz) * memory size * 512,00 MB
  * Type of memory * DDR2 SDRAM (PC2-4200 / PC2-4300 / 533 MHz)
  * Manufacturer of memory * Hyundai Electronics
  * Date of manufacture memory * week 39, year 2006
  * Revision memory code * 4141
  
  * Video card *.
  ------------------------------------------------------------------------------
  * Intel (R) 82945G Express Chipset Family * manufacturer * Intel Corporation
  * Video card chip Type * Intel (R) 82945G Express Chipset Family
  * Video card memory * 256,00 MB
  * Video card BIOS * Intel video BIOS
  *Driver*c:\windows\system32\drivers\igdkmd32.sys
  * Version * 7.14.10.1461, 25/03/2008
  ------------------------------------------------------------------------------
  and it's the plug to run the Sims 3
  ------------------------------------------------------------------------------
  THE SIMS 3 MINIMUM REQUIRED HARDWARE CONFIGURATION
  
  FOR WINDOWS VISTA
  * Windows Vista (Service Pack 1)
  * 2.4 GHz P4 or equivalent
  * 1.5 GB OF RAM
  * At least 6.5 GB of disk space hard at least 1 GB additional space happy Custom
  * 128 MB video card with support for Pixel Shader 2.0
  
  For computers using built-in graphics chipsets, the game requires at least:
  * Intel Integrated Chipset, GMA X 3000 or more.
  * 2.6 GHz Pentium D CPU, or 1.8 GHz Core 2 Duo or equivalent
  * 0.5 GB additional RAM
  
  SUPPORTED VIDEO CARDS
  NVIDIA GeForce series
  FX 5900, FX 5950
  6200, 6500, 6600, 6800,
  7200, 7300, 7600, 7800, 7900, 7950
  8400, 8500, 8600, 8800
  9600, 9800, GTX 260, GTX 280
  
  Series ATI Radeon™
  9500, 9600, 9800
  X 300, X 600, X 700, X 800, X 850
  X 1300, X 1600, X 1800, X 1900, X 1950
  2400, 2600, 2900
  3450, 3650, 3850, 3870,
  4850, 4870
  
  Intel® Extreme Graphics
  GMA X 3 x 00 series
  Laptop versions of these chipsets may work, but can run relatively slower. Autonomous cards installed in vanilla (not PCIe or PCIx or AGP) PCI slots, such as some GeForce FX variants, will perform badly. Intel chipsets integrated starring parts underclockes would not run properly.
  
  Chipsets integrated such as the ATI Xpress and the NVIDIA TurboCache variants will have low settings selected, but should operate satisfactorily.
  
  Please note that attempting to play the game using video hardware that is not listed above may result in reduced performance, graphical issues or make the game work do not at all.
  The NVIDIA GeForce FX series is unsupported under Vista.
  
  and he also said when I watched the news of the memory of the BIOS screen:
  
  Installed memory 1024 MB/PC2-4200
  Bank 1 512 MB/DDR2 SDRAM memory
  Memory Bank 2 not installed
  Memory bench 3 512 MB/DDR2 SDRAM
  Memory bench 4 not installed

  I know that I have to add memory and a video card, or even a power supply according to the video card, I get. Memory seems simple and easy to do, but the power SUPPLY and the video card, makes me a little nervous, any suggestions on what I should get and instructions on how to proceed will be greatly appreciated Thx! I apologize for this post being so long.

  Message edited by CareBear31 on 02/05/2009 13:02

  Adding instructions are here. When you buy new memory be sure and go to the website of the manufacturer of the memory. Use only brands so that they ensure th your product compatibility. Use the memory Configurator tools on the website of the manufacturer of the memory. Here are a few major brands for you: Kingston, Crucial, Corsair:

  Change the power supply: This video on youtube is pretty decent for generic power supply switching.

  Thislinkhas information on opening the cover and remove the cover.

  When you select a video card do not get cards great physically (i.e. ATI HD 4870 / 4850) because they are double wide and does not have limited space. Fantastic cards but are not for the pre-built PC.

  Any ATX PSU fits your case. 450 watts or therabouts enough for almost any addition of hardware on your pc. Do yourself a favor and stick the best brands such as Corsair, OCZ and others. Generic brands are not worth the problems they can bring even if they are cheaper.

• P7-1234 Pavilion: I have a p7-1234 Pavilion and want to upgrade the video card.

  I have a p7-1234 Pavilion and want to upgrade the video card. I am currently the EVGA GeForce GT 610 2048 MB GDDR3. This card will work with it?

  This is a power supply that will work for you:

  http://www.Newegg.com/product/product.aspx?item=N82E16817139048

  It is modular allowing you to use only the necessary cables.  This means that there is more room inside the circulation of air.  He is also a 600W which will give you extra power for the possible future upgrades.  Any block of power SUPPLY Corsair will be good.  They are fans of the quality products for a reasonable price.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Food and update video card for Pavilion s5 - 1021p

  I want to upgrade the power supply 270w in my Pavilion s5 - to 500-600w 1021p and replace the graphics card integrated with a Radeon 4650 video card.  Is it possible, given the constraints of size?  Any help is appreciated!

  Hi callen3625,

  According to HP Partsufer, the power supply of your PC is not included because it has a separate part number.  This is also confirmed by the information contained in the library of Services HP partner.  The block of power SUPPLY HP Partsurfer therein is 220 watts.

  Look here in HP Partsurfer for video cards that are used in the new Slimline models with a 220 Watt power supply.  These cards have been made specifically for the HP Slimline PC with a 220 watt power supply.

  Even more recent slimlines are other graphics cards AMD that work with a 220 Watt power supply.  Look here and here.

  Review the specifications of performance ATI and NVIDIA . Look at the specifications of strip memory bandwidth and level of DirectX support.

  You should contact HP support and get a recommendation of the video card or maybe even HP Partsurfer.

• HP Pavilion 500-164, upgrade the video card.

  I replaced the power supply in this area for a graphics card into the PCIE slot. I put a Nvidia 9600 GT in the box, not changed no settings, tried to start, and I get no bios and 6 beeps. Any advice?

  Based on specifications, your desktop HP Pavilion 500-164 has been bundled with Windows 8 installed and has a feature called 'Secure Boot'. You must DISABLE "Secure Boot" and ACTIVATE the standby mode 'legacy' in the BIOS before the computer will start with the nVidia 9600 GT installed.

  Please, remove the video card, make changes to the BIOS and turn off the computer. Then, reinstall the video card and turn on the computer. Your problem should be solved.

  Please see Computer Does starts is not after the installation of a videocard (Windows 8) for more information on the subject.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Pavilion G6 2303su: the video card upgrade?

  Hello.  I'm here to ask you, could I upgrade my video card on my HP Pavilion 2303su g6?  As graphics card Radeon HD 7670 M becomes older and older, I was wondering if I can get my video card to a newer model of AMD or Nvidia even?

  And also if I might well want to ask you if it is possible to update my video card, to give me some recommendations or the same list of compatible video card for my laptop designs.

  Any help would be really greatly apreciated!

  Kind regards

  Opticork

  No there is no way to upgrade your video card. This isn't a card at all but just a chip soldered to the motherboard. The video card, you have found and ask the subject for a very expensive high-end gaming machine which has the equivalent of a pci-e slot on the motherboard called MXM laptop. Your laptop has such without crack and no place to plug such a card.

• Pavilion p6 - 2127c: video card Compatible hdmi for Pavilion p6 - 2127c

  I have a Pavilion p6 - 2127c in my conference room, desktop computer connected to a TV 50 "flat on the wall. I would like to connect using an HDMI cable, but there is no HDMI port. What type of video card should I buy that is compatible with the office and for the videos and presentations (no game)? Thank you in advance for your help!

  Cmann225, welcome to the forum.

  Here is a video card that should work with your computer.  However, you should check ASUS website to find out what power supply unit (PSU) is necessary.  It indicates that 75W is required, but it is the power supplied by the PCI Express x 16 slot.  This means that there is no need an additional power connector.  The power supply of the computer is 300W.  Also, check to make sure that the card does not require UEFI in the motherboard instead of a standard BIOS with ASUS.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.