I tested Windows Technical Preview. Just last night has stopped working properly. I have R/R ' ed. No joy. Any suggestions?

Similar Questions

• "Show my windows and tabs from last time ' has stopped working after software updated to the end of January or early February. Now on 12.0a2. Change options "Auora to start: ' no longer works.

  I use this feature for years and update Firefox/Aurora in the next few days, maybe a week, an update becomes available and everything suddenly ' show my windows and tabs from last time ' has stopped working. I can go to the Tools-Option-general tab and change "at Aurora startup:" to this option, or 'Show my home page (s)' and now the opening in a new tab single even though I have URLs there. This may mean that this bit is not read correctly. I'm not playing: config, but I watch a few spoken options in the Web and everything looked OK.

  I would uninstall and reinstall it if you think it will solve the problem. I updated Aurora again because this problem started and it remains broken. It is a system of XP with SP3

  PS: I have two other windows with a XP and the other Windows 7. When I had the problem on my primary XP System I stopped to make updates to other systems. Today I updated the two other systems with the latest Auora (skip one or two updates) and both work very well.

  The best way for me to trouble?

  Hey punchcard4rjw,

  Have you tried to start Firefox in Mode safe? Key 'shift' startup of Firefox. If it doesn't happen in Mode without failure, you should read the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems.

  If this does not work, you should look the article How to fix preferences that will not save.

  Hope this helps!

• Catalyst Control Center window will appear to indicate that the program has stopped working properly

  Catalyst Control Center window appears when I start the computer, indicating that the program has stopped working properly.

  Uninstall the drivers and the Catalyst Control Center and download the latest version for your operating system from here - http://support.amd.com/us/Pages/AMDSupportHub.aspx

  Jim

• Windows has stopped working properly

  "" I have windows vista and when I try to surf the internet, after awhile, it appears as a small windows that says "windows has stopped working properly ' and it restarts not close windows. It started before this date sometimes more often until my pc broke down: it became a flashy blue screen with writing something like problem phsichical... damage discs and now I tried to format it but it seems like the same problem comes up... now I can't download it again up to a certain point It is stackable

  Looks like your system is good enough corupted.  I backup my data and restore the computer to factory settings.  The procedure for this varies from a make and model to another, but should be in the documentation for your computer.

  I hope this helps.  Good luck.

• Windows Vista has stopped working properly

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  "pastafasul" wrote in message News: * e-mail address is removed from the privacy * .com...

  
  

  I get a problem report that says that Windows Vista has stopped working properly. It is said to know if I have 32 or 64 bit system. For this I am told to click the Start button, click computer. When I click on start I get a computer. What should I do now?

  If you see the icon on the desktop, do a right click on that and then left click on properties. The window that opens has all the information you need.
   
  If no icon, and then start Windows Explorer and right click on computer it followed by the left-click on it.

• Photo Gallery Windows has stopped working properly

  When I try to use the windows laetitia Gallery, it shows a window that says "microsoft windows."  Photo Gallery Windows has stopped working properly.  then he said: it's the search for solutions, and the solution is always to update windows.  When I check my windows updates, it is said that it is up to date.  I have an automatic update.   This has happened for weeks.  I checked for solutions, installed things he told me too, etc, it continues to be every time.   I am able to use windows movie maker and media player, but it has happened with the photo gallery.

  Here is a solution I found:

  (1) Control Panel > Folder Options > view > show hidden folders and files
  2) go to: [reader
  Letter]: \Users\ [user] \AppData\Local\Microsoft\Windows photo library
  (3) delete all content (or back up if you like or at least copy to a folder separate until that you confirm the data is not lost and everything works as it should)
  (4) Photo Gallery start Windows

  All files must still be there, and should remain intact, but the problem
  should be resoved. It may take a minute or two to rebuild your library.

  If this does not work go to start / search and type in reports on problems and Solutions, and double click on the program icon that appears.  See if he has everything related to this issue.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Defender has stopped working properly

  When I turn on my laptop it user interface say that windows defender has stopped working properly, can not open windows defender to look at settings etc and since it has stopped working the computer guard stopping self to protect self, someone at - it ideas? It also came with "" error 0 x 80000003: one or more arguments are invalid '? "

  Hi richard.weeman,

  Try to restore your computer to a previous state of safe mode.

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer
  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.
  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.
  3. ensure that the safe mode option is selected.
  4. press ENTER. The computer then begins to start in safe mode.

  Follow the instructions below to restore your computer to a previous state of safe mode.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  2. in the System Restore dialog box, click Next.
  3. in the list of restore points, click a restore point created at least a week before the current date, and then click Next.

  Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.
  4. click on finish.
  5. the computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  If this does not work, follow the instructions in the link below to perform clean boot in safe mode.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• I use windows 7 and auto start program has stopped working and I can't find a way to recover.

  I use windows 7 and auto start program has stopped working and I can't find a way to recover. Also, I was not able to transfer files on disk or any other storage device, their there on the computer and it says that they work very well, but I can't transfer anything to them.  They will play a disc or view data on a disc that has already been done but don't transfer to the drive if I want to add new files or data to it. Drag and drop is going through the motions, but shows red circle icon.

  [Moved from comments]

  Probably tell you autoplay?

  Control Panel > programs > default Prorams > Change AutoPlay settings

  Or

  In the search programs and files, enter, AutoPlay

• I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a windows message immediately that "Quicken launcher has stopped working" Windows will attempt to resolve then problem__

  I installed quicken 2009 connected as owner on Vista Home Premium Notebook Sony. When I try to run Quicken I get a message of immediate windows Windows "Quicken launcher has stopped working" will try to resolve the problem then

  Hello Richard Popp,.

  I'm not an expert on Quicken so I do not know what help I will be.
  You could look at this post on the Quicken Forum and see if this information helps you.
  https://qlc.Intuit.com/post/show_post_full_view/cppSsgKbWr3PYHacfArQA8

  1 Quicken uninstall using the Windows Control Panel

  2. run qcleanui.exe and clean all versions.

  3. restart your PC

  4 Quicken resettlement to a new distinct and NOT in the Program Files folder in the folder where your Quicken data resides and install as administrator (if on Vista).

  5 update Quicken at the last updated R6.

  See if that helps. Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Whenever I get close Microsoft Word, it displays a window saying that Microsoft Office Word has stopped working?

  All the documents that I close (if it is registered or not, whether it is empty or not) shows an error message saying:

  Window with the loading bar appears: header 1 - "ofMicrosoft Office Word has stopped working ", heading 2 - "Windows is checking for a solution to the problem... " "

  Changes in wording (remains of load bar): header 1 - "Microsoft Office Word to try to recover your information... ", header 2-"it can take several minutes. "

  It takes then about 10 to 20 seconds until the charge bar disappears and the text becomes: header 1 - "Microsoft Office Word has stopped working ", header 2-"a problem caused the program to stop working correctly." ""  Windows will notify you if a solution is available. "

  This process happens every time.  Sometimes it restarts the program, and other times it ends just (closed) it.  I don't know if this is related to this bug, but I met another problem that began at the same time as this one:

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/f5e2a747-b429-4d55-8a6b-5d5a9b791dd1 (scroll to the bottom of the page of my post) .  That error is fixed now, but the "Microsoft Office Word has stopped working bug" continues to annoy me.

  Could this error be caused by my computer or Microsoft Word?  Does anyone have any information or conclusions of how this error can be fixed?  Is there some registry tweaks which can solve this problem?

  Specifications of the computer:

  Windows Vista Edition Home Premium Service Pack 2 (32-bit)
  Pentium Dual-Core CPU T4200
  RAM is 3.00 GB if it is of no use
  Microsoft Office Word 2007
  Computer is up to date on all updates, including Microsoft Office

  Thank you in advance!

  ~ G33KG1RL ~.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your Word question in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• failure of Windows 10 with modern configuration host has stopped working

  Windows 7 pro I failure of windows 10 after download, download, then crossed the preparation... get updates... check your pc is where message appears "modern facility host has stopped working... a problem caused blocking the program working properly." Windows will close the program and notify you if a solution is available. »

  Cancel the update level or if necessary, hold the Power button to turn off the PC.  Wait a half hour, then power turn voltage to see if it continues or rear rollers.

  If it cancels and then work done these steps for overcome Windows Upgrade failure - Microsoft Community 10.

  If it crashes again and/or don't roll back you can try here, whatever the method works to access Advanced Startup Options in Windows 10 to see if you can get into Safe Mode troubleshooting options, Startup Repair, Go Back or Reset.

  But I would cut my losses and the vastly superior Clean install Windows 10 improvement who will be activated from the last version media after install as explained in the Wiki.  Be sure to start the media to remove all partitions to make cleaner as illustrated.

  If you have files that were backed up not you may rescue files when Windows does not start

  In return ask questions and let us know how it goes.

• WINDOWS 7 64-BIT MEDIA CENTER HAS STOPPED WORKING

  My windows Media Center has stopped working and cannot find a solution for this. Also lately my firefox acted weird sometimes having go to the Task Manager and ending the firefox 32 * process to reopen. After a while, I decided to upgrade to 4.0 but I disliked a lot and tried a restore. So now my Firefox exe. is missing and cannot be found. I scanned the registry and fixed everything that it emits found but nothing to do with firefox. I tried a repair to boot with the windows disc 7, but nothing works. If anyone can help me pleeeeaaassseee, I would be very happy.

  Hello

  ·         What happens when you try to open the media center?

  ·         What is the error (if any) that you found?

  ·         When is this last work fine?

  ·         Did you change to the computer?

  
  Try under methods:

  Method 1: Try the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:
  I suggest you to turn off then turn on windows Media Center on the extension of the functionality of the Windows media enable or disable features and check if this solves the problem. See the link below to display the window for deactivation and activation of windows media player-
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  For firefox. I suggest you to contact mozilla.

   

• Windows 7, Explorer crash bug - "Explorer has stopped working".

  Upgraded to Windows 7 64 bit version

  Explorer crashes with the message "Explorer has stopped working".

  Reboot sends me in crash of infinity mode, best guess? Suddenly, Windows cannot load pictures. Disable thumbnails, infinicrash stops.

  Now I can not access any folder file. Trying to access any folder file by double clicking, right click - Open or try to save a file will plant to explore.

  Solutions that have failed:

  Virus scan - no virus found

  Corrupted files - SFC don't scan through the reports command prompt no problem

  Clean boot - errors continue

  Safe mode - continue errors

  Regedit - suggested questions with disabilities is not present (limitation of the machine)

  No new programs have been installed, no new files have been downloaded. It just started happening without discernible reason.

  Downloaded and implemented - Windows update errors continue.

  Restore Windows - errors continue.

  Signature of the problem:

  Problem event name: InPageError

  Error state code: c000009c

  Type of media loopholes: 00000003

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  Additional information 1: a650

  More information 2: a650c58a1a7a8f3f33e0f4bbe8a4fa54

  Information has additional 3: 182

  Additional information 4: 182a9be1e0a852d05c46ce9cf4562914

  Help?

  Random update: If strangely, using DivX which does not thumbnails of files, allows me to go through all my files...

  buy a new HARD drive. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• My 8 tiles Windows has stopped working properly

  Following an update, when I touch a tile on my screen, it seems that it opens the program, but then returns to its original position without opening.

  I think it is clear based on the suggestions above (especially the first one) that you don't have any effort by looking at this problem.  This problem is everywhere in the support boards.  I have the same problem.  All the tiles of windows worked when I put first to W8.  At some point (I guess after an update) almost all of the tiles has stopped working. The windows application I only works in TuneIn.  Even the App store doping does not work, then, how are we supposed to update the application.  When you select and App, opens in mode full-screen logo and then closes. I've deleted all my anti-virus, checked to make sure I have DirectX 11 installed and controlled a dozen other tips lose all my free time in the last wee trying to solve this problem.  All to nothing does not.

  So, please put some effort to solve it.

• R2 de Windows of 2012: Crypto Shell Extensions has stopped working on an attmpt to install the certificate root CA.

  On an attempt to install root CA certificate exported an AD MS area on a MS Windows Server standalone 2012 R2 Standard I get "Crypto Shell Extensions has stopped working" error message. The root CA certificate is valid for 25 years, I have no problem installing on my desk of MS Windows 7.

  Then gets recorded in the Windows event log:

  Bucket of error, type 0
  Event name: APPCRASH
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1: rundll32.exe_cryptext.dll
  P2: 6.3.9600.17415
  P3: 54504eb8
  P4: ncryptprov.dll
  P5: 6.3.9600.17415
  P6: 545042f2
  P7: c0000005
  P8: 0000000000011b 85
  P9:
  P10:

  -
  -
   
    1001
    4
    0
    0 x 80000000000000
   
    1051
    Application
    vaultnv1
   
   

  -
   
    0
    APPCRASH
    Not available
    0
    Rundll32.exe_cryptext.dll
    6.3.9600.17415
    54504eb8
    ncryptprov.dll
    6.3.9600.17415
    545042f2
    c0000005
    b 0000000000011, 85
   
   
   
    C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_rundll32.exe_cry_5e77194d83e64aae6bea8811e1e158fe8fa5e7a_f9f82d40_2157a85e
   
    0
    acb6030e-1D35-11e6-80BB-e41f13d540c8
    2048
   
   
   

  -----------------------------------------------------------------------------------------------------------------------------

  The failing application name: rundll32.exe_cryptext.dll, version: 6.3.9600.17415, time stamp: 0x54504eb8
  The failed module name: ncryptprov.dll, version: 6.3.9600.17415, time stamp: 0x545042f2
  Exception code: 0xc0000005
  Offset: 0x0000000000011b85
  ID of the process failed: 0 x 828
  Start time of application vulnerabilities: 0x01d1b142680ae27f
  The failing application path: C:\Windows\system32\rundll32.exe
  Path of the failing module: C:\Windows\system32\ncryptprov.dll
  Report ID: acb6030e-1d35-11e6-80bb-e41f13d540c8
  Faulting full name of the package:
  ID of the failed package-parent application:

  -
  -
   
    1000
    2
    100
    0 x 80000000000000
   
    1050
    Application
    vaultnv1
   
   
  -
    Rundll32.exe_cryptext.dll
    6.3.9600.17415
    54504eb8
    ncryptprov.dll
    6.3.9600.17415
    545042f2
    c0000005
    b 0000000000011, 85
    828
    01d1b142680ae27f
    C:\Windows\system32\rundll32.exe
    C:\Windows\system32\ncryptprov.dll
    acb6030e-1D35-11e6-80BB-e41f13d540c8
   
   
   
   

  Any help will be appreciated.

  Thank you

  Leo

  They should be able to help you.

  These forums are designed for home computer users.

  See you soon.