I thought I made the transfer of Kobo

Similar Questions

• When Fire Fox made the transfer to the other computer?

  Sync is done until the closure of the browser?
  Every hour?
  Once a day?
  Once a week?
  What happens if two computers are turned on?

  Hi wesruns,

  Take a look at this thread:

  https://support.Mozilla.org/en-us/questions/760224

  It will show you how to find and (possibly) change the synchronization interval.

  Hope this helps!

• BlackBerry Smartphones Blackberry slow, 9900 after having made a transfer of 9300

  Hi I hope someone can help me with this.

  I have a BB 9300 curve, where I had a lot of problems with the phone is slow. When I sailed on the search option, he showed it - "yucvbm$ device research 'Laval'.

  When I got my bb 9900 I made the transfer using the desktop software and it seems to have yielded to the problems of my curve 9300 on my bold 9900. This problem is slowing down my phone in a big way and I was hoping that there is a fix for it? If this isn't the case, I'll have to re - install the phones software a format essentially?

  For any help or suggestion would be greatly appreciated.

  Thank you

  Ross

  Take a look at my post about restoring from an older model... leave the settings.

  (Sorry should have said - the title of the topic is - "requested facility not subscribed")-make sure that you have backed up your important documents, and then proceed to leave options - security - ticks and then type in blackberry in the box... expect that it restarts then use selective restore to only bring back your data leaving the settings stuff out.

• I restored my files Carbonite - or thought I did - but they can't are not there - I thought I found the right file - please help! The steps did not work!

  I thought I found the right file to restore my files of Thunderbird for... or so I thought... This is the file with 8 random characters...
  Anyway, the tech of Carbonite had restored the files in a folder on my desktop. I copied the file and paste this file to Thunderbird.
  As the files are being restored, the system I warned that thousands of files were the same... I said to replace.
  I deleted my profile e-mail and closed before Thunderbird I did all that. Then I returned to my email account. But the restored files aren't there. Only my Inbox since the transfer. No old emails, no record, no contacts...
  I don't understand what I am doing wrong?

  Just wonder if you copied it into your profile as a subfolder or if it replaced your profile?
  How did you create your backup?
  What is a full copy, a partial copy or a compressed copy (zip)?
  You copied to "C:\Users\Regina\AppData\Roaming\Thunderbird\Profiles\9k2py1g1" which, you profile should have ended .default
  I guess it was a typing error in.

  Only if your 'Thunderbird restore' was a complete copy or if you develop a one zip

  For not to destroy anything try:

  • Rename your old profile fx 'X9k2py1g1. Default X"or move.
  • Copy your "Restore Thunderbird" (I think that it contains a folder with subfolders 9k2p1g1.default) so C:\Users\Regina\AppData\Roaming\Thunderbird\Profiles contains a new 9k2p1g1.default

  Try restarting Tbird

• I don't want to ruin either involved in the transfer of ID Apple account for ITunes

  How do you get the other songs of a different iCloud who served before you made a new iCloud account to use as the master account without blocking the transfer of 90 days? What are the disadvantages if transferred accounts?

  There is no way to 'Transfer' or merge Apple ID.  Everything you have downloaded with a given ID is for always related to THIS specific ID.  Your only recourse if you want everything on 1 account specific, is to re-download that - if it were a purchase, you must buy it again.  If it was free (and still available), without issue.

  HTH

• How can I change the default actions of what made the PC when I connect a camera, USB key, etc.?

  How can I change the default actions of what made the PC when I connect a camera, USB key, etc.. My Samsung intensity II is what I need it for; I want to shoot to the top of this window asking me what to do when I plug in, but one day, I was not thought and press on 'No Action' with the "always perform this action for this device" (or said something like that) checkbox checked.

  Once it is connected, go to my computer, and your camera photo or anything else that should be there.  If is isn't, it is a completely different issue.  It's done, right-click on it and select Properties.  Click the AutoPlay tab.  There is a version of dialogue enough of this "window asking me what to do."  You can figure out what to do from there.

• Windows Easy Transfer stops the transfer before the end

  My aunt has an old XP machine and a Vista-ish computer. I tried for a few days to move the files to the box of its XP to Vista via WET box and cable to transfer files. In all cases, the transfer gets somewhere between roughly half and (in one case) almost finished before it fails with a "Lost connection" apparent icon - the right USB flashing with an 'X' in the lower connector. Transfers are not ending on the same file, so I think it is unlikely that a particular file is the source of the problem.

  The old machine is not USB 2.0, while the new machine works. I've not found anything indicating that it is a problem, but I thought it would be relevant.

  I'm at a complete loss now as what could be the problem. Any suggestions?

  My aunt has an old XP machine and a Vista-ish computer. I tried for a few days to move the files to the box of its XP to Vista via WET box and cable to transfer files. In all cases, the transfer gets somewhere between roughly half and (in one case) almost finished before it fails with a "Lost connection" apparent icon - the right USB flashing with an 'X' in the lower connector. Transfers are not ending on the same file, so I think it is unlikely that a particular file is the source of the problem.

  The old machine is not USB 2.0, while the new machine works. I've not found anything indicating that it is a problem, but I thought it would be relevant.

  I'm at a complete loss now as what could be the problem. Any suggestions?

  Hey Spiffyman

  link below has information from microsoft for WET

  want to try the other methods too

  http://support.Microsoft.com/kb/928634

  Walter, the time zone traveller

• Nikon transfer program was working properly, now, the program closes as soon as I start the transfer

  A couple of days, this Nikon transfer program work properly. Today, as soon as I started the transfer, microsoft has closed the program with the message microsoft would let me know if he discovered the solution to the problem.  I went online for Nikon and downloaded a newer version. Exactly the same problem.   I tried the troubleshooting suggestions to change the compatibility settings, but have only made in the resolution of the problems...  I suspect an update can be installed on my computer which is now program inconsistent, but I don't have an idea what to do or where to start. Help.

  Hi Gary,.

  Could answer you the question:

  ·         The problem is specific to the only Nikon transfer?

  You can check the obtained updates installed on the computer by following the steps in the article.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-in/Windows7/see-which-Windows-updates-are-installed

  If the question is limited to Nikon transfer then I suggest you to contact Nikon support for assistance.

  http://www.nikonusa.com/en/service-and-support/product-support.page

  Get back to us with the number of KB updates.

• Will not allow the transfer of files without authorization. How do I get permission?

  2 laptops to home network.   Windows 7.    1 x 64-bit, 1 x 32-bit.

  I have set up accounts on both computers at home as an administrator.
  I just want to transfer files / photos between them.

  My account on both (admin) will not allow the transfer of files without authorization.

  How can I get permission? I have set up on the two passwords I tried to use, but not joy.
  I missed something obvious?  I thought that I could just drag and drop!
  HELP please.

  Ownership of a file or a folder,

  Right click on the file/folder, select properties and then click the Security tab.

  Click Advanced, and then click the owner tab.

  Click on edit and then do one of the following:

  To change the owner to a user or group that is not listed, click other users and groups and enter the object name to select (examples), type the name of the user or group and then click OK.

  To change the owner to a user or a group is listed in the change owner to box, click the new owner.

  To change the owner of all subcontainers and objects in the tree view, select the Replace owner of subcontainers and objects of the box.

  See also why I can't delete a file or folder?

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

• I dropped my membership and made the mistake of slipping just apps into the trash. How can I fill completely uninstall process without having to renew my subscription?

  I thought I could uninstall by dragging things to the trash-installing was officially the Director of bureau. I didn't realize that I needed to uninstall officially while I was still a member. I dropped my membership and made the mistake of slipping just apps into the trash. How can I fill completely uninstall process without having to renew my subscription?

  Hello

  You can use the cleaning tool Adobe CC: use the Adobe Creative Cloud cleaning tool to solve installation problems

  Kind regards

  Sheena

• How to change the transfer server repository

  Hello

  I made a mess!  Play with the new 4.5 ViewServer I configured transfer server repository directly on my server from view. Now, I created a real transfer server, but I can't change the repository, unless I stop to see serve. But if I stop View server I can't reconfigure the repository...

  This information is written anywhere in the server (or vCenter db)? In this case, I can edit the record in the Database.

  Thanks in advance

  Kind regards

  Davide

  in this tutorial http://paulslager.com/?p=624 is teaching you to install the server transfer, put in maintenance mode follow by adding the repository. Please do the opposite way that putting maintenance, then remove the transfer server and the repository will be deleted as well together.

  iDLE-jAM | SC 2, SC 3 & VCP 4

  If you have found this device or any other answer useful please consider useful or correct buttons using attribute points

• Reg apply log archiving after the transfer of data files

  Hi all
  
  That I reinstalled the main server of the D-Drive E-reader data files using the command line.

  C:\>Move <source_path> <destination_path>

  The redo logs for the move operation will apply on the eve of the database?
  In addition, what happens if the data files are moved manually in the primary database (i.e. without using the command prompt)?
  
  
  Thank you
  Madhu

  See this doc. Keyword search Rename a data file in the primary database

  http://docs.Oracle.com/CD/B28359_01/server.111/b28294/manage_ps.htm#i1034172

  Also, you need to update primary database controlfile if some moment of the file made...

  And also close this thread

  Reg apply log archiving after the transfer of data files

  As it would help in the forum of maintenance to clean.

• Stop the transfer of my iPad to my 6s iPhone apps

  How to stop the transfer of my iPad on my iPhone apps?

  Apps do not transfer from one device to another. If your iPad apps download on your iPhone, turn off automatic downloads in settings > iTunes & App Store > Automtaic downloads > Applications > Off.

  IF your iPad apps sync your iPhone on iTunes, click on remove in the list of applications when your phone is connected to your computer and that you synchronize and make sure that these applications are not selected to synchronize in the future.

• When I open a new tab, I get a search result 'AVG '. I already made the topic: config reset but it still doesn't work. How can I get a blank tab open?

  When I open a new tab, it always comes to the top:

  http://ISearch.AVG.com/Tab?CID= {7d7746b8-fb39-4619-86fd-792cbc268005} & mid = 72dc207d310ff3c58bd4dbeaeddede3a-fe6a71ecae4eb764a90a5203c991f01a6245f52e & ds = AVG & v = 13.2.0.5 & lang = es - & pr = en & d = 2012-06-02% 2009% 3 a 32% 3 a 49 & sap = nt

  I already made the topic: config reset and it does not have the new blank tab or go to a specific URL I type in address. What can I do to get a new empty tab? Thank you.

  Change the browser.newtab.url preference, or it is ignored?

  If it changes after you exit and then restart Firefox, look for a user.js file, as described in this article: How to fix preferences that will not save.

  If it is ignored, are looking for an extension that is unwanted in the Add-ons page:

  CTRL + SHIFT + a button orange Firefox (or tools) > Add-ons

  On the left side, click Extensions, and then disable all non-essential or unrecognized extensions.

  Typically, a link will appear above at least an extension disabled to restart Firefox. You can complete your work on the tab and click one of the links in the last step.

  Any improvement?

• 23 FF has a tab in the upper left corner. I made the change of url to empty, but it's still there. How can I get rid of it for good? W7 Ultimate

  F 23 has a tab box in the upper left corner. I made the change of url to empty, but it's still there. How can I get rid of it for good? W7 Ultimate. There was no box in another version of FF.

  Hello, apparently this option has been removed intentionally in preparation for a redesign of the browser which will land in firefox later this year. You can use the following extensions to work around this issue if: https://addons.mozilla.org/firefox/addon/hide-tab-bar-with-one-tab/