I tried to rename my drive d aknowledge it but usually always my computer except that it. How can I connect my d drive and e?

Similar Questions

• ADE 4.5 keeps freezing ("not responding") when I plug my Bebook mini E drive. When I unplug the E drive it immediately starts working again. I tried different versions of the ADE (2.0, 3.0, 4.0, 4.5) but they all have the same question. How can I fix?

  ADE 4.5 keeps freezing ("not responding") when I plug my Bebook mini E drive. When I unplug the E drive it immediately starts working again. I tried different versions of the ADE (2.0, 3.0, 4.0, 4.5) but they all have the same question. How can I fix?

  His player on this list: Adobe Digital Publishing Solution?

• How can I restore my docs, photos and music to back up an external hard drive?

  I had to reset my Dell Dimension E521 to factory settings.  Before I did, I copied all my files, photos and music on a portable hard drive Western Digital.  How can I get my files, photo and music restored to my PC?  I tried to copy it to the PC, but I found myself with backup file 1 to 141 of backup file.  And they are all zipped.

  Hello

  1. which version of the Windows operating system is installed on your computer?

  2. have you created a backup drive or just copied the files to a disc?

  3. How do you back up files? (Simple copy and paste or use any software)

  I suggest you to refer to the following Microsoft article and check if it helps.

  Restore files from a backup:

  For Windows 7: http://windows.microsoft.com/en-US/windows7/Restore-files-from-a-backup

  For Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Restore-files-from-a-backup

  Please provide us with more information, so that we could help you to solve the problem.

• I'm trying to uninstall a program called speed of PC fix. But it continues to tell me that the program is missing. So, how can I remove it my program and features.

  I'm trying to uninstall a program called speed of PC fix. But it continues to tell me that the program is missing. So, how can I remove it my program and features.

  Use the system restore. Next time think before you install the obvious fakeware.

• How can I connect to a user on my drive c that are not not on my user account in my control panel

  Thanks for your help...

  Here's the question...

  I am not able to connect to the user account.  When I check the c drive of the user is referenced, but when I checked under the user Panel is not listed.

  The question is how can I connect a user account in my c drive not registered on my user account in my control panel?

  Files in the folder (C:\Users) user account are left after the removal of the user of a computer account.

  Presence of a user account in the C drive does not necessarily a real account by this name need to exist.

• files and folders: How can I load all my files and folders to my new account of my external hard drive?

  Who can help, I just put a new account on my computer and deleted the old account. I backed up the old files on my external hard drive. I want to know is how can I load all my files and folders to my new account of my external hard drive? I thank you for your time and knowledge have a very nice evening, Shawn

  Because it's a new account (even if with the same name), the restore procedure is unable to put files and folders in the same place, they came (because this place technically no longer - if yes, then the process is done and the transfer is complete). It can create a set of separate files (maybe even under a new user name, if it has been stored in this way).  If so, all you need to do is copy the data as you would copy any other files and folders (not the main files of the user profile themselves but the data in them) on the new files in your user account and who will take care of the transfer. Here is more information about the restore procedure which may help you in the process.

  Here is an article on the restore procedure:http://www.vista4beginners.com/How-to-restore-files to make sure you do this right.  It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.

  This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course.  But it teaches you a lot about what is possible and how to do it.  It also focuses primarily on the full backup process, but he did mention the full backup and restore process as well.

  Here is an article on the advanced use of restoration (during normal restore does not work):http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.

  Restore files from a backup
  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  I also found the following (but don't know if it of true or not):

  1. after the start of "backup and Restore Center."

  2. I chose "Advanced Restore"

  3. I was did not an administrator password... maybe because my account is an administrator account.

  4 choose "files from a backup made on a different computer.

  5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »

  6. under the drop-down list box, select your drive/partition and continue

  7. If all the backups on your drive, it will show a list of them.

  8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."

  9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that thebackup location is not available " ")

  10. and you press "next".

  11 guess what... no error!

  12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.

  13. I selected the folders I wanted to restore and bingo... it their restored smoothly.

  14. so that the next time see a mistake, try to continue with him... ;)

  I don't know if this will help, but it does not provide much information about the process (when it works).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I forgot my administrator password. How can I connect? I don't have my drive only product key.

  I forgot my administrator password. How can I connect? I don't have my drive only product key.

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, I replaced?

  When I replaced a hard drive, I wanted the same drive letter, but he wants me to take another. How can I assign the drive letter, that I replaced. The letter is now used by another device?

  Open disk management, find the drive using the drive letter you want to use, change the drive letter of this to 'Z', find the new drive, change the drive letter that you want, and then change the drive letter of the drive you have labeled it 'Z' to a drive letter of your taste.

  Jim

• I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows?

  I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows so that I can do the calculations?

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

• I'm trying to download the trial version of Illustrator, but I get a window indicating that the CC is updated and nothing beyond that. What can I do?

  I'm trying to download the trial version of Illustrator, but I get a window indicating that the CC is updated and nothing beyond that. What can I do?

  HI Margaret,.

  Please visit:http://prodesigntools.com/adobe-cc-2015-direct-download-links.html

  Don't forget to follow VERY important.

  I hope this helps.

  Concerning

  Megha Rawat

• Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD player on my computer. If not, how can I install these? !!

  Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD player on my computer. If not, how can I install these? !!

  Try these links

  Download the CS6 products

  Download Adobe CS6 Trials: Direct links (without Assistant or Manager) | ProDesignTools

• I backed up my drive with Idrive before it crashed, but after reinstalling my backup for firefox profiles, I can't return my saved usernames and passwords

  I have backed up our hard drive on IDrive, replaced the failed hard drive, but I cannot reinstall my user name registered and saved passwords from saved files. I reinstalled my profile from the back to the top successfully, but the user/passwd news aren't there. I understand that this info is stored in two different places, and I tried to locate the missing files in my Idrive account, but nothing helped. I'm wasting my time or this info is salvageable? Thanks for any help.

  SUCCESS! This is the solution I needed. Thank you very much. After resetting my preference signon.importedFromSqlite on the topic: config page by default, deleted the file logins.json in the current profile folder and then I drugs and dropped my old code of my saved files file and VOILA! All of our usernames and passwords reappears.

  Thanks Cor - el. Thank you help and time to solve my problem!

• How can I connect my Mac to a network server? As in windows yo go to my computer / connection to a network drive, and then you select a letter and write the name of the server that you want to be logged

  I'm trying to adapt Windows to my new MacBook Pro with OS El Capitan.

  I work remotely for a company and I want to connect my Mac to the server of the company.

  My question is how to connect a MAc to a network drive with the permanently available connection.  For example, in my old HP I went to my computer / connection to a network drive. I've selected a letter and note the name of the server that I wanted to be connected to. The connection was then shown with my other drive hard 'sections '; I want to say C:, D: (for recovery), e: (for tools) and then connecting to the external server has been shown with the selected letter.

  There is no "letter" under OS X. It's a hangover very old of BACK, devices of mapping and volumes labeled mailbox.

  If you are connected to your corporate network, you should see the available network volumes listed in the Finder, in ' my computer > network ", or with the command K to connect to a server.

  You can create an alias for the volume and put it in the Dock, or leave on the desktop or put it somewhere else, and the next time you want to connect to this subject, simply double-click on it. You can also add the server address to your "favourites" in the connect to Server dialog box.

• Tried all your suggestions, but still cannot fix the runtime error. How can I reinstall Windows 7 without losing everything?

  I tried a soft boot, it does not solve the problem.  I deleted all the redistributable files from Microsoft, and then restarted, I still have the same error message, even if I had deleted the files.  I reinstalled the updated files, the problem persists.  I'm frustrated and tired of this and now just want to know how to reinstall Windows 7 Premium Edition while preserving my other programs and files.

  If you reinstall, you will need to backup your data, do the reinstall, and then reinstall your programs.  And before that, you will need to have all the drivers from the manufacturer of your computer.  If you can restore to the factory settings, which may save you the hassle of dealing with drivers.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is approximately $90 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• How can I restore my contacts, messages and folders to a backup drive?

  I had to replace my main C: drive. My old install Thunderbird is on another internal drive. I installed Thunderbird on the new drive. I can access all the files on the backup drive. But how do I do a restore to my mail, mail files, and list of contacts? How can I find the necessary files?

  I am in desperate need of my old records for some infoamtion software.

  Any help would be appreciated to greatkly.

  Thank you.

  Ted

  Mission accomplished. While waiting for your response. I found an article that mentions a copy/paste the following code from the old to the new pref.js pref.js:

  user_pref ("ldap_2.servers. (OutlookExpressAddressBoo.position', 0);
  user_pref ("ldap_2.servers. OutlookExpressAddressBoo_1.description', 'Outlook Express Address Book');
  user_pref ("ldap_2.servers. (OutlookExpressAddressBoo_1.dirType', 2);
  user_pref ("ldap_2.servers. OutlookExpressAddressBoo_1.filename', "impab - 1.mab");
  user_pref ("ldap_2.servers. OutlookExpressAddressBoo_2.description', 'Outlook Express Address Book');
  user_pref ("ldap_2.servers. (OutlookExpressAddressBoo_2.dirType', 2);
  user_pref ("ldap_2.servers. OutlookExpressAddressBoo_2.filename', 'impab.mab');

  Who identified the impab.mab file and now all my contacts are showing.

  Here is a link to the article: http://nctritech.com/thunderbird_contact_groups.php

  Detective Conan. Thank you for all your help.

  Ted