I turned on my computer this evening and all my files are gone. All images, office documents, everything. Then, a low disk space window kept popping up. Is it all the same to recover lost files and how can I fix the disk space is low?

Please help I don't have the money to have someone come out and look for me.

Welcome to the Microsoft Answers community.

System Restore and the temporary files can be placed on your hard drive, but can easily be recovered.

Try the utility Disk Cleanup to delete files and system restore points that you can safely remove.

You can start disk cleanup, by doing one of the following:

  • Click Startand then click run. In the Open box, type cleanmgr, and then click OK.

    -or-

  • Click Start, point to programs, point to Accessories, point to System Toolsand then click on Disk Cleanup.

    -or-

  • In Windows Explorer or my computer, right-click the disk in which you want to free up space, click Properties, click the general tab and then click on Disk Cleanup.

Remove files stored on your hard drive

To remove files stored on your hard disk that you no longer use, follow these steps:

  1. Click Startand then click my computer.
  2. Right-click the disk in which you want to free up space, and then click Properties.
  3. Click the general tab, and then click Disk Cleanup.
  4. Click the Disk Cleanup tab (if it is not already selected), click to select the check boxes beside the files that you want to remove, and then click OK.
  5. Click Yes to continue it with this action, and then click OK.

Remove Windows components

To remove Windows components that you don't use, follow these steps:

  1. Click Startand then click my computer.
  2. Right-click the disk in which you want to free up space, and then click Properties.
  3. Click the general tab, and then click Disk Cleanup.
  4. Click the Other Options tab, and then under Windows components, click clean.

    The Windows Components Wizard starts.

  5. In the components list, clear the check box next to the component you want to remove.
    • A checkbox grayed out next to a component indicates that only some of its subcomponents are installed.

      If you want to remove a subcomponent, click Details, clear the check box next to the subcomponents that you want to remove, and then click OK.

  6. Click Next.
  7. At the end of page Windows Components Wizard, click Finish.
  8. Click OK, click Yes to proceed with this action, and then click OK.

Remove installed programs

To remove programs that you no longer use, follow these steps:

  1. Click Startand then click my computer.
  2. Right-click the disk in which you want to free up space, and then click Properties.
  3. Click the general tab, and then click Disk Cleanup.
  4. Click the Other Options tab, and then under installed programs, click clean.

    The dialog box Add / Remove Programs is displayed.

  5. In the currently installed programs list, click the program that you want to remove and then click Remove (or Change/Remove).
  6. If you are prompted to confirm the removal of the program, click Yes.
  7. Repeat step 5 and 6 to delete other programs you use is no longer and then click close.
  8. Click OK, click Yes to proceed with this action, and then click OK.

Delete restore Points

To delete all points except the most recent restore restore point, follow these steps:

  1. Click Startand then click my computer.
  2. Right-click the disk in which you want to free up space, and then click Properties.
  3. Click the general tab, and then click Disk Cleanup.
  4. Click the Other Options tab, and then under System Restore, click clean.
  5. Click Yes to remove all but the last restore point.
  6. Click OK, click Yes to proceed with this action, and then click OK.

I hope this helps!

Lisa
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • When I try to fix a picture in windows photo gallery, she disappears. Why is this happening and how can I fix

    When I want to work with a photo in Windows xp home, I use the Windows Photo Gallery.  I can open the photo, crop the photo very well, but when I want to adjust the settings and I say "Fix", the photo becomes a black rectangle, so I do not see what effect have adjustments on the photo before I have record improvements, so I have to go all the way back and open up to see the changes.  Is there a solution to this?

    When I want to work with a photo in Windows xp home, I use the Windows Photo Gallery.  I can open the photo, crop the photo very well, but when I want to adjust the settings and I say "Fix", the photo becomes a black rectangle, so I do not see what effect have adjustments on the photo before I have record improvements, so I have to go all the way back and open up to see the changes.  Is there a solution to this?

    ======================================
    If you reduce the hardware acceleration of your chart
    and achieve an improvement, it is an indication that you
    you will need to update your video driver.  Improvement or
    No... don't forget to return the full acceleration slider.

    The following article explains how to:

    (272193) PI: how to troubleshoot graphics issues
    http://support.Microsoft.com/default.aspx?kbid=272193
    (scroll down to "Microsoft Windows 2000 and Windows XP")

  • My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

    Code 8007045 that appear when Windows Update fails to install important updates

    Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

    HOW to hide an update or restore a hidden update
    http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I started to receive the message below. -What this means and how can I fix it?

    My Powerpoint 2010 stop working today.

    Open Control Panel and go to the section "programs".  Search for Microsoft Office in the list, and then choose 'repair '.  If you don't see a repair option, click 'Edit' instead, and then fix it in the next screen.

  • Lately on the Web, pdf files are not correctly; What is the problem and how can I fix this so I don't have to use IE?

    I am a teacher and often need to open the PDF files of academic electronic databases of journal articles. In the last two or three weeks, when I try to do it using Firefox, only the first page of the pdf display and the rest are empty. In addition, a bar appears in the upper part with the message "this pdf file cannot be displayed properly." So I had to switch to Internet Explorer to open files and do my research. What happens and how can I fix this problem so that you can open PDFs from the Web in Firefox and ask them to work correctly?

    Hello, firefox 19 introduced its own Viewer integrated pdf - if you want to switch it to the plugin you used before displaying a PDF file just go to the firefox options > applications and scroll down and set the default action for the portable document (pdf) format.

    How to disable the built-in PDF Viewer and use another Viewer

  • The screen of my laptop turns off when windows start. What is the cause and how can I fix it?

    Original title: computer failure

    the screen of my laptop turns off when windows start. What is the cause and how can I fix it. Thank you

    You have the screen image out to another monitor (one that is not plugged in fact). How you pass to the internal laptop display varies, but most cell phone companies make a combination of keys, such as Fn + F6 or something.  Looking for a symbol that looks like a monitor.  It is usually color coded and requires activation of a Fn key.

  • iTunes continues to crash on my iMac using OS 10.11.4 forcing me from quitting smoking. Someone else has this problem and how can I solve this problem?

    iTunes continues to crash on my iMac using OS 10.11.4 forcing me from quitting smoking. Someone else has this problem and how can I solve this problem? I use the latest version of iTunes. There seems to be a problem since I updated the system software.

    iTunes: solving problems with third party plug-ins iTunes - https://support.apple.com/HT203395 - press Option and command (on Mac OS X)

    Hold down the option/alt key and create a new test library. If iTunes start your old library file is corrupted and will need to be replaced from a backup or rebuilt from scratch.

    LINC Davis February 2016 - https://discussions.apple.com/message/29767369#29767369

    Reinstall iTunes:

    -Post of Niel April 2015: re - install iTunes app - https://discussions.apple.com/message/28055467#28055467 - delete the old application first, with instructions on how to do it.

    -April 2015 LincDavis post with some more details on the method outlines Niel - https://discussions.apple.com/message/28101611#28101611

  • I can't open my pictures folder. Error message says I don't have permission! I ran disk utility and found no errors. How this could have happened and how can I fix this problem? I'm the only user.

    Suddenly, I can longer open my pictures folder. I tried to move a picture to the folder to see what is happening and received an error message saying I was not allowed to display the contents of the folder and if I move the picture here, I won't be able to see. I ran disk utility and found no permissions error.

    How this could have happened and how can I fix this problem? I'm the only user. No one else has ever physical access to my computer. However, I sign up for Skyhub a few weeks ago and copied the contents of my Macbook it. Since then, a "Remote disk" icon on my hard drive. This would be part of the problem?

    Select it, choose get the information on the file menu, open the section sharing and permissions and give you access.

    (141083)

  • Windows FixIt error code 0 x 80092003. -What this means and how can I solve this problem?

    I have a PC with Windows XP SP3... ecentlped recognizing my DVD/CDRW. I tried to download Windows Fixit and when I tried to run, I get the error code 0 x 80092003. -What this means and how can I solve this problem?

    HP Pavilion a1410n PC with Windows XP Media Center edition. Sony Optiarc cddvdRW.

    Hi J Mbanza,

    -What is the link that you used to download the fix tool from?

    error 0 x 80092003 which is an error reading or writing to a file.

    Try to download from the link below and check.

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Thank you!

  • I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

    I have an old computer running windows 98 when I try to start until you get a date checking DMI Pool error message failure boot ATAPI CD-Rom 07,08 what this mean and how can I solve this problem?

    I want to erase the hard drive and use it to install windows xp.

    From what I've read, it could be a number of things that went on the wall. Issue of dead hard drive, BIOS, peripheral USB plugged when starting, etc.

    Does not help, but could help to point you in the right direction...

  • I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

    I get this message at startup ' 3rd Master Hard Disk:S.M.A.R.T. bad condition. " -What this means and how can I solve this problem?

    SMART is a technology on newer computers that allows the computer to monitor the health of hard drives in your computer. Something happened to one of your readers that detects the smart as a problem, and she's trying to warn you proactively to this topic before it fails.

    It may be also that you have installed a very old hard drive that does not support the CHIP and the monitor reports that it can not read the drive status.

    So depending on your level of knowledge and experience, you can watch to replace the hard disk that is reported, or you can disable SMART followed to make the message disappears. The second option but then means if it is really a failure, it is likely any work stoppage or corrupted so data you do note to solve.

    http://en.wikipedia.org/wiki/S.M.A.R.T.

  • I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

    DVD decoder not installed?

    I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.
    A few weeks ago, I played DVD on my computer. I would like to know what is happening. Any ideas/suggestions?

    I tried to play one of the same DVDs I played before... same message.  Nothing to my knowledge has been removed from my computer and I'm the only one with access... "very confused.

    Thanks if anyone can help.

    Yes, and if you install the utility on your system, you'll see all decoders.

    The utility will also tell you if a decoder is compatible or not.

    Using Media Player version 10 or 11?

    the utility tells me I have no decoder... the only thing I can think is that if I actually deleted it... I rarely remove anything because I do not add a lot... but it is possible a few weeks ago, I have to get rid of some things (I'm quite cautious because I'm not an expert).   It is the Media Player version 11, I was trying to use... but I rebooted now 10 to see if there was something to update related that mess.

    because I used the VLC Player successfully, I have not yet tried Windows Media Player (since WMP reloading and load the codec pack)

    So great to have the entry of a person who knows what he's doing.  Thanks again. I will try the Windows Media Player later and see if I have his use of return.

    Have a great day!

  • I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

    I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

    If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

    The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

    In addition, you cannot ping or establish a Telnet connection to the mail server.

     
    This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
    This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

    RESOLUTION

    To resolve this problem, remove the software firewall from Zone Labs of your compu...
    To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

    http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

    MORE INFORMATION

    For more information about ZoneAlarm or to contact Zone Labs, see what follows...
    For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

    http://www.zonelabs.com (http://www.zonelabs.com)

    For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

    252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

    For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

    274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

    The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

    Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

    later ducdive

  • Why my product key is blocked and how can I fix?

    Blocked by Microsoft product key

    I recently bought a premium windows 7 and I installed it on my computer very well. But later I have decieded to reinstall windows because of other errors in computer hardware. I formatted the hard disk containing windows was so I reinstalled. When I entered the product key, it said that it had been blocked by microsoft. Why he is blocked and how can I fix?

    Windows product ID: 00359-232-7656684-86874

    The ID of the product - 232 - indicates a not for resale MSDN account. If you are not the account holder and you bought it in a box at retail, the box and its contents is counterfeit. Request an immediate refund from the seller

    For more information, see this:

    http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285

    and this:

    http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/06698c46-8668-4ccd-A544-a88969265a6b

    To see how these counterfeits are more, see:

    http://www.YouTube.com/watch?v=hzqNNiOM0cs

    You can buy a legitimate windows from a legitimate retailer.

  • Help! I went during an email to 'junk' and something accidentally and now all my incoming emails went to "undesirable." How can I fix?

    Help!  I went during an email to 'junk' and something accidentally and now all my incoming emails went to "undesirable."  How can I fix?

    OK, each email client has slightly different options.

    In Outlook, the Actions-> Junk Email-> junk e-mail Options, list of blocked senders. Search for wildcards (*) as these can produce strange results.

    Or in the same dialogue, but the 1st Options tab there are 4 radio buttons. If the bottom one is selected only emails from those in your senders list will go to the normal Inbox, so if you have anyone in this list, then, all emails are junk.

Maybe you are looking for