I unplug the printer and have to reinstall the software. Why?
Hello
I had my all in one Photosmart B110 for a few months and no problem. During the last two weeks, I turned off the printer or unplug it, every time I have to reinstall the entire software. Can someone please help me because it's a lot of your time? Thank you!!!
Luana2405 wrote:
I've always had automatic updates and it was never a problem until a few days ago. Do you think I should still turn off?
The connectivity is not a problem that I have full signal and that you have completed relevant tests.
I use the clean Windows Firewall.
Thank you for your help. If all goes well, I can get to the bottom of this...
There were moments where the Microsoft updates and updates from HP and others caused inexplicable behavior of Windows operating systems. Computer chaos caused by updates have been in the news before. Do a google search and see. Updates are a known causal event of problems and one thing ask us on when things do not quite work as expected.
It's much better that we take a glance to see what is updated instead of blindly trust that everything will be OK. Check the download and let me decide option instead of the... of course, go ahead and install all updates. Be an informed PC user.
Tags: HP Printers
Similar Questions
-
original title: help installing a printer
I try to install a printer on my computer and continue to receive an error message indicating that the "software cannot be installed using the command" run as ".". To resolve this problem, he told me to sign out and then sign in as a user with administrative privileges. I am the owner of this computer and that you have had for several years. I need to know how to solve this problem. Can anyone help?
Hello
have you tried right clicking on setup.exe printing software then run as administrator?
-
I have a gen apple 1 dot matrix printer and I need a driver software for it
I have a matrix printer of gen 1 Apple and I want it to work with my windows computer but I can't type good driver software.
does anyone know of a good driver for the printer matrix apple for windows?
What type of port is has a 'printer by points Gen 1 Apple? If it has a serial port Apple, you may have a secondary problem is that it connects to a typical Windows PC?
-
cannot access windows live mail and have to reinstall wliddi.dll How can I do
Two messages pop up: "this application has failed to strt beaquse wliddi.dll is not found." Reinstall the application may fix the problem.
"msmail.dll could not be loaded."
The question you have posted is related to Windows Live Mail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
-
I really need software Adobe Indesign 2014 to practice my lessons and on the websit, Adobe keep offers me the latest version at the same time, I need this specific one. Please can you people help me?
Hello, Fabienne,.
have you tried this already http://www.adobe.com/support/downloads/product.jsp?product=31&platform=Windows > version Adobe InDesign CC 2014 (32-bit Windows)
or you use Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools , BUT please read carefully the ' Note: very important.
Hans-Günter
-
I tried to disable in mac, then enable it in windows pc. Does not. Help me to solve this problem, please.
I found the problem.
In Windows PC was not a certified product before. So I should make changes to the host file. Now everything works correct and officialHere is a useful link
Thank you, Bailey
Best.
-
I have a HP LaserJet printer and have lost the disc. I need to reinstall the printer so I can print the document again and I also tried the installation procedure. Help
Hello
You can download the software here...
Tricky
-
I have Adobe Acrobat 9 Pro Extender. When I try to convert a Word file to PDF that says that it cannot find the drivers from the Adobe PDF printer and reinstall Adobe Acrobat 9.0. In addition, when I open just the program Acrobat 9 Pro Extender an error message comes up saying that a part of the Capture 3D plugin has been damaged. I went to customer service and they sent me here. Please tell me that this is not another race. I'm running out of patience! I have 10 window.
Acrobat 9 is quite old and not longer supported. The last Windows OS that could use Acrobat 9 has Windows 7 and Acrobat had to have all updates applied.
You need to upgrade to Acrobat DC.
-
Hi, I just bought a used second generation ipod nano and whenever I have unplug the charger a line crosses the screen and I can't do anything with the ipod. Help, please.
When you do a Reset (reboot) on the iPod
Learn how to reset your iPod - Apple Support (see iPod with a click wheel)
do you see this line on the screen when the Apple logo? If you do, it is probably a hardware problem. If the line is not there at the start, but returns after the iPod starts, you can do a restore of the iPod using iTunes. This d erases the IPO, reinstall its software and sets it to the default settings.
Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support
If the problem persists after the restore, the cause is likely to be hardware problem.
-
I have two printers installed on my laptop, only appears. The Epson Workforce 600 is connected via a usb cable, the other is a wireless network. I reinstalled the software of the printer (Epson) and it shows in printers and devices, but it is not the list when I go to print something. When I select "Find a printer", it gives me a list of computer icons.
Hello
Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.Good luck, you need to update or reinstall the latest driver.
Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/support=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I have a DELL Photo 920 printer and a DELL speaker, but I'm not sure of the model. I was moving the computer around the enclosure is unplugged and I could not it reconnect properly. When I tried to fix it, it turned out that I also disconneced My DELL printer. How to fix speaker (soundbar) and the printer? Thank you!
I don't know why you asked this in the forum Office 2007, so I moved it to the windows 'Hardware and drivers' forum.
Examine the back of your PC. Your sound card must be labeled with pictograms, something like this:
The line show an arrow going into circles or curves and will often blue. Speaker/line out will show an arrow coming out of the circles or curves and will often green. The microphone usually indicates a picture of a microphone and is often pink.
-
My printer will print a demo and report, but freezes when I try to print a document or any other task. Most of the time when I try to open a document he invites me to open or save and when I select open it momentarily off and then immediately prompts you to open or save again. It does again and again and never opens. When I select record it indicates that the file already exists. I tried to unplug the computer and the printer and restart their but the problem persists. What can I do?
Hello, Jsraine,
To rule out malicious software, restart your computer and start typing the F8 key. Select Mode safe mode with networking. Disable the system restore where the malware is known to hide. Re-activate when you are finished.
How to turn on and off on system restore in Windows XP
http://support.Microsoft.com/kb/310405
Download the following tool and run a scan complete
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
When you're finished, restart Windows
Start > type CMD
Click on CMD and type sfc/scannow
Press enter
Note: There is a space between sfc and / scannow
When you are finished, while remaining in the CMD window, type chkdsk /f /r
Press enter
You will see a message about the volume must be locked and you want to monitor during the recovery?
Press y and press enter
Restart the computer for the scan at startup
When you are finished, you will find the results in Event Viewer > Windows Logs > application log
Look for Winninet to see the results
Start > type Services.msc
Press enter
Scroll down to print spooler
Click with the right button on spooler and select stop
Wait for Windows to stop the spooler
Window close services
Start > Control Panel > printers folder
Right-click on the printer, and then select open
You see all pending print jobs?
Click the printer menu, and then select Cancel all Documents
Close printers folder
Start > right click on computer
Select manage
Select Device Manager in the left index
Click on the + sign next to the IEEE... compatible printer
Right-click on the printer and select uninstall
Click on the + sign next to imaging devices
Right-click on the printer and select uninstall
Click on the + sign next to Bus USB controllers
Right-click on the printer and select uninstall
Close Device Manager
Restart the computer
Windows will reinstall drivers on reboot
Go to the manufacturer's website and search for updated drivers
Open the Services window
Scroll down to print spooler
Click with the right button on spooler
Select restart
Wait for Windows to start the spooler
Close the Services window when you are finished
Try printing again
-
The printer indicates that online, my laptop said that it is in offline mode, I've deleted and reinstalled the printer and still the same problem, please help
You are not quite correct. Some newer wireless printers have only a wireless connection. No USB port and a standard Ethernet cable port.
-
All the printed documents have text and graphics highlighted in blue
Hello
I running Windows 7 64 bit and I have an Epson Stylus Photo R800. Most impressions have text and graphics highlighted in blue. Printing for example a test print from printer properties page. If I do the same thing to my wife running 32-bit XP pc it prints very well. If I restart my XP pc it prints very well.
I have restored the oldest version I have, I removed and re-installed the latest driver of Epson printer and re-installed Windows on top of my existing installation and tried different settings for color management. All to no effect.
Epson say it is a question of communication and cannot me more help.
I help would be grateful for any help, I don't want to do a clean install of Windows 7 but it looks like my only option
Results OK
Reinstalled windows, fault gone
Transfer files and settings using Windows Easy Transfer, back of fault
Created the new user and logged in as that user, without fault
Reset all fault as my old account to its factory default settings, always there
Delete my old account and account created new, then the files transferred only to this account went fault.
If something in my profile has been the cause of the problem, but do not know what. In any case system of works fine now
-
I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.
I have a wireless printer and changed modems and need to know where to go to change the security key for the printer works wirelessly.
The method depends on the printer. Read the instructions or uninstall, and then reinstall the printer. It will ask you the modem settings.
Maybe you are looking for
-
Pavilion TouchSmart 14z-f000: slow startup and performance
My laptop takes forever to start and load windows completely. Once Windows is fully loaded, it tends to freeze. I have a lot of space on the hard drive. I use it only for business applications, i.e. Microsoft Office Suite and the law! contact mana
-
How to know the serial number, IMEI, MEID
Hi all Can someone help me know the serial number IMEI, MEID of Mac book Air TKS
-
P3C92PA #ACJ: Compatible RAM for laptop HP 15-af114AU
I want to update the RAM in my laptop (HP 15 af114au) by another 4 GB. What RAM Kingston will be compatible with my system?
-
Hello! As a week ago, I formatted my computer and of course, some drivers were missing. I restored the network adapter, but the network controller driver is still missing. I tried to install the two drivers, but they did not, and reading all these fo
-
I have Win7 Premium 64-bit. All of a sudden, a big Gateway logo popped up on the desktop when I boot. How can I get rid of him? If the suggestion is to "look in the BIOS" (leave a preliminary google search), please tell me what/how to do it, and do w