I use the right program?

Similar Questions

• can someone help me choose the right program to open my file on the desktop?

  Try to open the game of chess. It prompted me to choose another file to open chess game of Titian. So I did it by clicking on the internet window explore. now all the progress or files on my desktop changed for symbol (e) of the exploring on them and I can't open them. I don't know how to get it back. Can someone help me?

  Hello

  I would like to know the operating system you work with.

  Method 1) when you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program

  http://support.Microsoft.com/kb/950505

  Method 2) in case if it does not help, you must change the associated file. To change the file association for a specific file, you must first display the properties of the file.

  1. You can view the properties of a file by selecting the file and choosing 'Properties' in the file menu. Or you can simply right-click on the file and select "Properties" from the context menu that appears.
  1. To change this file association, click the button change.
  1. You are given a list of recommended programs to open the file, as well as several other programs on your computer. The recommended programs are programs that Windows knows is going to be able to open the current file type. For this reason, choose a program from the list of recommended programs is a good idea. You can choose a program from the list of other programs, but the file cannot open.
  1. You can change this program opens all documents of a certain type of file, and then click the checkbox "Always use the selected program to open this type of file."
  1. Click OK

  Check the link for more information:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Icons change incorrectly in Windows

  http://support.Microsoft.com/kb/2396571

  Note:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.Microsoft.com/kb/322756/fr/ )

  It may be useful

• Warning__program error__one or more files necessary for the operation of the memorex expressit label design studio are missing or corrupt. Please use the Setup program to reinstall the software.

  Tried to update to Safari that does not work after the update. Then my printer stop working. Get the following message: 'WARNING '.
  program error
  necessary for the operation of the studio of design of memorex expressit label one or several files are missing or corrupt. Please use the Setup program to reinstall the software. »
  Already uninstalled and re-installed the software manufacturer labels several times. No luck.

  It seems it all started to go wrong after your update of Safari went wong:

  http://www.Apple.com/support/Safari/

  Link above is for Support of Safari.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  We do not know your Label program Vista compatibility.

  Check if your program is Vista Compatible:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It comes with Vista, upgrade install and activate Forum.

  Try the Vista programs Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 taskbar and start menu large icons are either missing (empty by default) or do not show the right program.

  I use Windows 7 Home Premium on an AMD Athlon (TM) II X 4 630 2.80 GHz with 6.0 GB of RAM (64 bit OS). PC is up-to-date with the latest updates and use Norton Anti Virus.

  I used this PC for several months with no problems. After doing some research in my menu of the taskbar Windows Explorer and start icons have become corrupted. The links always work but do not show the right program.

  I tried several things to fix this. I removed everything in the start menu and taskbar, rebooted, added a few back but the problem still exists. I deleted the icon cache file (renamed to db.old), restarted, problem still exist. I made a recovery of a checkpoint system before the problem was still not fixed. When I go to small icons, the problem disappears. The problem only seems to appear when you use large icons in the bar of tasks and the start menu.

  Based on what I've tried so far is there any other suggestions on how to fix this?

  This tutorial is to rebuild the icon cache when the cache is corrupt.

  http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

  Option One is easier.

  If that doesn't do anything for you, please repost to Windows 7 forum, section office and customization:
  http://social.answers.Microsoft.com/forums/en-us/w7desktop/threads

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Box "Always use the selected program to open this kind of file" is grayed out out__cant change file association for any type of file

  I'm not allowed to change any combination of files for any type of file... If I try to associate a file type with a program that I can't the box is grayed out to always open the file with this program, for example, if I try to open .py (programming in python language file) with python from another program whenever I have to right click and open with python, but if I want to choose the "always use". the selected program to open this type of file"is grayed on I can not change it... pls help

  Hi VikkHckrz,

  1. you remember to make changes to the computer recently?

  Method 1:

  You can consult the following KB article and run the fix it tool available and check if you can assign file association.

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Also check out the link:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  After running the fixit so check the option is grayed out or not.

  Method 2:

  If you're still having problems, then you can try to change the settings in the registry only if it is present on your computer and check if it helps.

  a. Click Start, type regedit in the search box and press ENTER.

  b. navigate to the

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer

  (c) in the right side of the screen, double click on "NoFileAssociate".

  d. change the value of "NoFileAssociate" from 1 to 0.

  e. exit the registry editor and restart the computer and check.

  Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Size of the application icon... Home screen will not use the right one. Help!

  I thought I could include different sizes of icons (ie. 48 x 48, 32 x 32, etc.) and the camera choose the size of the device or the theme-appropriate application icons. Of course, this isn't the case. So, how do you get the device to use the right size for the theme icon?

  For example, I have a Verizon 8330 (curve) and the theme of Verizon uses sizes 48 x 48 icons. If I use a size of 48 x 48 icon to my app, it looks great. However, if I change the theme of one of the standard BB Dimension themes, it will be small scale my icon 48 x 48, 32 x 32, which seems quite bad. Why does not he chooses the icon size 32 x 32 I understand? How can I provide both sizes and have it use the correct size according to the theme? It looks even worse when I use 32 x 32 and he then it extends to 48 x 48. Help!

  You'll have to do it by programming it your application startup.  You can use the following code to get the width and height of the icon:

  int height = net.rim.blackberry.api.homescreen.HomeScreen.getPreferredIconHeight();
  int width = net.rim.blackberry.api.homescreen.HomeScreen.getPreferredIconWidth();
  

  Then set the using the appropriate icon:

  net.rim.blackberry.api.homescreen.HomeScreen.updateIcon( icon );
  

• Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar...

  Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar. However, if I click with the right button on a link and select "Open link in a new tab", the tab displays the URL in the address bar. If it works when a new tab it's not in a new window.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site? "

  I was on facebook and remove an icon by using the right-click menu, but then all my photos and pictures of profile, could no longer be seen. I was able to view them in the browser, so it's something I've done in Firefox. How can I unlock a site?

  If you select that right click menu context then you block all images from this area and not a specific image, so do not use that.

  • Check exceptions in tools > Options > content: Load Images > Exceptions (for example sphotos.ak.fbcdn.net)

  You can use the following steps to check if the images are blocked:

  • Open the web page that has the missing images in a browser tab.
  • Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
  • Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
  • Go to the Media of the window tab "tools > Page Info.
  • Select the first link of the image and scroll down through the list with the arrow down.
  • If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

• I can't use the right-click in the windows Explorer window

  I use windows 8.1, hp pavilion touchsmart nb x 64. my windows explorer suddenly went wrong. I can't use the right click.
  Please help me, I can't access my data

  Hello

  Try running windows System Restore - choose a restore point at least 24 hours before the occurrence of the problem with the context menu.

  A guide on the implementation of this can be found on the following link.

  http://pcsupport.about.com/od/Windows-8/FL/system-restore-Windows-8.htm

  Kind regards

  DP - K

• I've been using Foxit reader and uninstalled, how can I get firefox to use Adobe now? (He keeps trying to use the deleted program)

  I tried Foxit reader to see if I liked it better than Adobe decided to remove it. But now he keeps trying to use the deleted program and I can't get firefox using Adobe. I've uninstalled and reinstalled firefox and Adobe reader and the problem is still there.

  http://support.Mozilla.com/en-us/KB/managing+file+types

• Get the access denied error after using the rights delegation wizard in Active Directory

  I used the rights delegation wizard to grant permissions to a group in AD and do not always receive either the access message when I try to change anything on an existing object, I can however create new objects without any problem. What can I do to fix this?

  Original title: Delegation issue in AD

  Hello mhipke,

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums, as it deals with Active Directory. It is better suited for the IT Pro TechNet public. Please ask your question in the ITPRO Technet Windows Server Directory Services.

  I have provided the link for you:
  http://social.technet.Microsoft.com/forums/en-us/winserverDS/threads

  Sincerely,

  Marilyn

• Windows will not honor "always use the selected program to open this type of file."

  When I try to open a file *.img using 'open with... '. "I get a window of"Leader Type Helper"asking what software I want to use.  I have check "open this file using a software program (sic) that (sic) is already installed."  This very unnecessarily opens another dialog box titled 'open with' * Sub * the files already browser window fill the screen while I'm not yet aware that the box is here.  Having managed to find, I choose "7-Zip File Manager" and click on the box always saying "use the selected program to open this type of file", and then click OK.  This opens the file using the selected program, as you wish.

  However next time I try to open a *.img file, I again get the window "Help file of Type" and must go through the whole process again.  (By double-clicking on the file shows "Windows Disc Image Burner".)  Why don't Windows 'always use the selected program' like I asked?  Windows is aware that I have chosen before, because it is considered to be the only 'recommended program' in the 'Open with' dialog box  Thanks for any help!

  Care to try another tool?  This small utility can help: http://izt.name/apps/types/

  You will find the file type in the list of icons (.img files, then), and then to change what he uses to open the file by clicking on the option 'open' and edit the properties.

  

• inadvertently, click "always use the selected program to open this type of file" how undefault and redo icon to the icon of white empty file?

  I accidentally click "always use the selected program to open this type of file" on the srt file. How to make it undefault and again the icon to icon file empty white?

  You can do this via a registry change, but it is more appropriate for a typical user to simply use the system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
  System restore

  Ever wished that you can go back in time following a bad fall? With Windows, you can.

  Installation sometimes a driver or a program can make Windows run slowly or erratically. System Restore can return programs and system files from your PC to a time where everything worked, potentially prevent hours of troubleshooting of headaches. This will not affect your documents, images or other data.

  In Windows 7, you can create system restore points more and see exactly what files will be deleted or added when your PC is restored. For more information, see create a restore point.

  For more protection, use the restore system backup and restore, which is designed to help save email, photos, documents and other personal files.

  To use the system restore

  Before you start the system restore, save open files and close all programs. System Restore will restart your PC.

  1. Open system restore by clicking the start . In the search box, type restore the system and then, in the list of results, click on system restore.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. Follow the steps in the wizard to select a restore point and restore your computer.

     For more information, see System Restore: frequently asked questions.

  In Windows 7 system restore can prevent headaches hours after an accident.

• How can I set the option of working "press quality" to create a PDF file by using the right click?

  I need to process a large volume of PDF from Word files.

  Option of work required is high quality press.

  I tested the creation of PDFs in 2 ways:

  Open the file in Word and PDF/Print/File and select high quality default press + save as default printer

  Then I tested it by selecting several files to a directory and using the right click (convert to PDF)

  Results: PDF do not have the same properties and right click PDF files have a poorer quality unsuitable for printing paper.

  Do you know how to set the option of high quality for the click press right (Adobe does not use the same parameters depending on the operation)?

  Go to the preferences of Acrobat. Choose the convert to PDF pane and click Microsoft Office Word. Click on change settings and from there, you get a dialog box that allows you to set the Settings Adobe PDF for such operations in batches. Select the option of high quality print and then press OK twice and you should be good to go.

  -Dov

• Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Hello! I have download CC and paid $69.99 but I want to use the programs that I pay for, why, if I pay $69.99, I have to use the test programs? you want to know what I pay and how I can get the services of programs I want to use.

  Miguelo28272279 for more information on how to solve the connection error preventing your membership to authorize please see sign, activation or connection errors. CS5.5 and later, Acrobat DC.  We invite you to update this discussion if you have any questions about the steps listed in the document.