I've recently updated to Muse CC (2014.2), but this morning, it appeared in my menu cloud creative as needing to be updated again. What is a minor update with exactly the same name?

Similar Questions

• 2 files exactly of same name in the same folder.

  I have encoutered something strange in windows 7. I have 2 files with exactly the same name, and the files are also in the same folder. When you open one of them and saving them without warning are given this file already exists. Cup and last file to another location and copy of return, no warning is given of the file already exists also. Anyone know how this is possible.

  Library...

  Right click on the first file .ppt > Properties > check what's next to place:
  
  Do the same for the second file. Because the location is the same?

  Probably not... Library is not a folder, it's something different. It shows you file stored in any location specified in the settings of the library. In the left pane you can right-click Documents in libraries > properties > and you will notice that you have listed several locations. Two 'identical' files may appear in the library, but they have a different location on your hard drive.

• VMDK_FILES_TO_BACKUP: Vmdk bearing the same name

  What I will meet the following when you try to install ghettoVCB.

  I want than backup discs connected to the VM Windows to exclude from ghettoVCB. We have 2 data warehouses, one with al main drives and the other with backup discs. Since we have 2 data warehouses these two discs VMDK names are identical. How can I specify the backup disk to be excluded when runnning ghettoVCB or is there a possibility to exclude a whole routine backup data store?

  Hi SteeWell,

  As @jpgillivan said, it's probably a good idea not to have the same name right for VM even VMDK as it can become confusing if you must manually manipulate an individual disk, but that said, it's always a taken use case supported by ghettoVCB.

  First of all, you can have the computer virtual disk extend store multiple data, and usually when you so, host ESX (i) will automatically ensure the VMDK (s) is unique, at least that's what I saw in ESX (i) 4.x and 5.0. The only way that I knew you could get EXACTLY the same name is that if you renamed manually the VMDK (s), otherwise if you have to say 2 VMDK (s) which is spread over two data stores they would call something like this by VMware:

  [datastore 1] myvm/myvm.vmdk

  [datastore 2] myvm/myvm_1.vmdk

  As you can see, the two VMDK (s) have unique names and there are a number that auto-increments based on the number of VMDK (s) and this would allow you to easily exclude or include the VMDK (s) you want to backup.

  In any case, if you had somehow the following configuration:

  [datastore 1] myvm/myvm.vmdk

  [datastore 2] myvm/myvm.vmdk

  which is always supported in a perspective of ESX (i), the good thing about how it is actually stored in the .vmx file is the full path to other VMDK (s) who don't residence not in the backend configuration data. (e.g. vmfs/volumes / [datastore uuid]/myvm/myvm.vmdk). ghettoVCB will then list the VMDK (s) the user wishes to exclude and then match it against the list of the VMDK (s) identified by users.

  So here's an example:

  TEST has 2 VMDK (s)

  * TEST.vmdk (located in the same directory as the .vmx)

  * TEST.vmdk (located in another data store)

  If you have run just dryrun mode, you will see the following text:

  2011-11-20 23:17:58 - dryrun: #.
  2011-11-20 23:17:58 - dryrun: Virtual Machine: TEST
  2011-11-20 23:17:58 - dryrun: VM_ID: 2983
  2011-11-20 23:17:58 - dryrun: VMX_PATH: /vmfs/volumes/himalaya-local-SATA-intel.510:0/TEST/TEST.vmx
  2011-11-20 23:17:58 - dryrun: VMX_DIR: /vmfs/volumes/himalaya-local-SATA-intel.510:0/TEST
  2011-11-20 23:17:58 - dryrun: VMX_CONF: TEST/TEST.vmx
  2011-11-20 23:17:58 - dryrun: VMFS_VOLUME: Himalayas local SATA intel. 510:0
  2011-11-20 23:17:58 - dryrun: VMDK (s):
  2011-11-20 23:17:58 - dryrun: /vmfs/volumes/4d8abe51-234bb8da-6db2-003048d9586b/TEST/TEST.vmdk 2 GB
  2011-11-20 23:17:58 - dryrun: TEST.vmdk 1 GB
  2011-11-20 23:17:58 - dryrun: VMDK (s) INDEPENDENT:
  2011-11-20 23:17:58 - dryrun: TOTAL_VM_SIZE_TO_BACKUP: 2 GB
  2011-11-20 23:17:58 - dryrun: #.

  If you only wantd to TEST.vmdk, then your backup config would look like:

  VMDK_FILES_TO_BACKUP = "test.vmdk"

  If you want only the other TEST backup. VMDK, then your config would be loo like:

  VMDK_FILES_TO_BACKUP="/vmfs/volumes/4d8abe51-234bb8da-6db2-003048d9586b/test/test.VMDK".

  As you can see, even if the virtual machine has 2 VMDK (s) exactly the same name, the script is able to determine that you want to backup, as long as you specify the path to the desired VMDK.

  I hope this makes sense

• Return of the mistake of MUSE: why do we not have several files with the same name?

  Well - I thought I had all this worked and fixed, but I met the download error 'Why do we have several files with the same name' once again.  (I downloaded all the files several times today in order to 1) works the way it worked the last time and 2) get an OAM file that is not loading for some reason any load again and the download takes about an hour to transfer all the files manually.

  To recap:

  (1) an option "Upload only modified files" returns the 'Muse has encountered an error and closes.  Why do we have several files with the same name? "error just as before.

  (2) a full download will work but takes forever and is NOT a substitution for work changed files option.

  Please advise with possible solutions!

  -Dave

  Is it possible to have two .oam different files in different folders on your computer where the .oam files have the same name? I'm theorizing that there may be a bug in the treatment to ensure the folder created for a .oam placed on the server receives a unique name, particularly in the case of a partial update of the site on the server.

  Please send us the .muse file and all the files in .oam related to [email protected] along with a link to this topic for the context so we can attempt to reproduce this error and isolate the root cause. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. Thank you.

• Why do an update with the same name every day to security update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2467175)

  I installed this point at least 6 times. is there a change in one update to another with the same name?

  Hi RogerMawdsley,
   
  Follow the steps listed in the article given below to resolve this issue:
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• Server data store will automatically get updated when the new file (with the same name) is placed in the landing area

  
  Hi guys,.

  The data store server-side will get automatically updated when a new file with the same name is loaded in the landing area?

  for example

  1 data store created for server-side get the file named UK.xls (he has 5 rows)

  2 snapshot created for the above data store

  3. created with the snapshot process

  After that if I remove 2 lines from the same file and load again to the landing (with the same name). So by re-running the process will take the last file OR do I need to reload the file in the data store every time when there is a change in the file. We also tried with option to work but the last file was not picking up.

  Any help will be really appreciated.

  Please lets us know your updates.

  Please advice

  Thank you

  VT

  Hello

  When you create a snapshot, you create a snapshot whose task (provided that you use a data store server-side) can be run from a job. To refresh the data, run the snapshot in a job task. If you create a task at the time the snapshot and the processes that use it, they will automatically connect and will be 'upstream' data through the snapshot in the process. You can then choose whether it would be appropriate to write the snapshot or not (for the effectiveness of performance if you want to do the straight through processing) by activating or deactivating the bucket of data staged that the snapshot written to. The snapshot in the work task means that the data is refreshed.

  For the work of design to the Director, you can refresh the snapshot by running again it manually in the context menu.

  Kind regards

  Mike

• Update database with several form fields with the same name

  If I've made good progress on my CF photo album project, but now I meet a problem.  Once I downloaded a collection of photos and them inserted in my database, I bring up a page that is actually an array containing the thumbnail of each image, some info on it and the description of the photo.

  The table is inside a < form > tag, and the description is a < textarea > tag.  I have many text boxes that I have pictures, so there may be any number (within reasonable limits).  I'd like to be able to type a description for each picture in each text box rather than having to do one at a time, and then click the button submit to update my file.

  Each text box has the same name, so I had the idea of adding a hidden form field that held the photo ID, then on the processing page, I might have a < cfloop >.  My problem is that I can not understand how to associate each photo with the corresponding description ID, especially if we consider that some of the descriptions may be empty.

  Is there a good way to do this?

  As you probably understand, giving all your textareas eponymous means that when the form is submitted, you get a value that is a list of the contents of each text box comma-delimited.  If none of the commas are typed in the text box, you have a problem.

  My preferred method is to include some sort of identifier as part of the name of the form field.  Since you have ID photo available, I would use those.  This would give your names textareas as description_111, description_112, etc.

  When the form is submitted, I loop through the form.fieldnames list.  If the first 12 characters are 'description_111', I can remore 12 characters to get the id.  I also have the content of the text box using the array notation.

• How can I create 2 albums in the same name and the same artist

  The guy is anyway to make the 2 albums in the same name for the same artist? If there is no way so please someone tell me how can I suggest updating to iTunes

  Faisal,

  If they have the same artist and eponymous album, iTunes will think they are from the same album.  The best way would be to change the title for the second version, for example 'Loveless' and 'Loveless 2.'  Or you could put parts in separate lists.

  If you don't want to make a suggestion to Apple, here's the link:

  http://www.Apple.com/feedback/itunesapp.html

  "In the dropdown for" Type of comment ", select"Enhancement request.""

• I never had the chance to restart firefox after an update was ready to be installed it crashed, now when I go about firefox to see if there is an update he says im at day, but under recent updates, he said the last one was on 6 September.

  Firefox crashed before I could reboot to update, how do the update to latest installed today? The last update was 6 under recent updates.

  The update has been disabled due to a problem with some Add - ons endangered when they were updated at the same time as the installation of the update of Firefox 7.0. An update of Firefox 7.0.1 'chemspill' is being developed on fix that issue, but it may take a few days to get it ready for release.

• Ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter. fact that associated with MSSE PUM & the boxes unchecked in MS security Center.

  Original title: PUM. Disabled.SecurityCenter

  I recently removed "patch system" of my Dell computer XP. Malwarebyte s was the only software to do. MSSE caught, but couldn't fix it. I then updated & ran MSSE on my Toshiba - no threats not found. I then ran Malwarebytes & two threats were each one with the same name: PUM. Disabled.SecurityCenter both at the Date of the registry in HKLM\SOFTE\Microsfot\SecurityCenter\AntiVirusDisableNotify & HKLM\SOFTWARE\Microsfot\securityCenterFirewallDisableNotify.  These two have been listed bad: Good (0) (1).  In the Malwarebytes wesite, I read that this has something to do with MSSE. In a commentary, he says it occurs if, in the MS Security Center, the notification "Notify me if my computer might be at risk because of my virus protection software settings" is unchecked.  I then went ahead & check all 3, firewalls, viruses & automatic updates. My computer seems to work well, except that the fan runs all the time (there are a lot of processes running & the CPU usage is very--often 100%, but the computer works fast).

  My questions are: 1) the PUM associated MSSE & the boxes unchecked in MS security Center; (2) should I click on "ignore" in the Malwarebytes scan? 3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?  Thanks in advance for your help.

  PC fan2

  Hello

  (1) is associated with MSSE PUM & the boxes unchecked in MS security Center;

  The following thread might answer this question: http://forums.malwarebytes.org/index.php?showtopic=69859

  (2) should I click on "ignore" in the Malwarebytes scan?

  Yes

  3) was right to check all the boxes in the center of security - "altert me if my computer may be at rist b/c of my xxx software settings?

  Only, run antivirus software at the same time. Firewall must be performed, evil-ware bytes can be run at your pleasure.

• Several files with the same name.

  Cannot publish to Business Catalyst because of a fatal error, where it is said "why do we have several files with the same name?  The website and all its contents have not changed in more than a year with the exception of minor changes to the wording so unable to understand what the error is encountered. Are there not better misdiagnosed at one point less for the files in question.

  The problem is the result of a mixture of case-sensitive and case-insensitive between how files within the .oam are put into interaction with and what is written in the muse_manifest.xml file during a re - download full compared to an incremental download.

  If all .oam packages files are tiny and the original .oam were replaced in Muse with the all new tiny .oams, then you should select Upload: publish all the files in the dialog box Options. From there, forward publication of incremental changes should work without errors.

• I can't save a PDF with the same name

  I can't save pdf files with the same name on the network drive in our society. I have full control over this network drive and can do anything create/read/write/change. Other programs work fine, but not Adobe Reader. I can save a pdf file with a different name, but when I try to save as in XI or replace as in DC had an error: the file is read-only or opened by someone else. Save the document under a different name or in a different folder.

  By the way, Acrobat Pro, I got the same message.

  

  Hi igorp74028164,

  Please provide the exact point of the software & OS installed on your system. Also check if it is there any update available for the software after crossing "" help > check updates "»

  Follow this thread to reset the preferences for the acrobat software. : - How to reset preference settings in Acrobat format.

  Also please check if this file is saved to the network drive or local, if its network on Please save it on local disk & then check. Make sure also that this preview pane must be closed in windows Explorer.

  Kind regards

  Christian

• How to display all the data to a database with the same name?

  I am familiar with the creation of basic website, but I want to learn how to create more dynamic Web sites.

  I create a Web site where a user can register on the site and counts there. Once into account here, there will be different options they can do.

  The new application form is in the section account it is configured for a user to submit a multiple application and save it in the database, that works, but the problem I have is during the examination of the application, it does show that one of them, not all.

  How can view the request of a user, sign in?

  

  I can get to the screen, but not all.

  Is it possible to do this or any suggestions on how to do?

  Here's the code for the ReviewRequest:

  <? PHP require Connections/Connections.php"?" >

  <? PHP

  session_start();

  {if (isset($_SESSION["fname"]))}

  }

  else {}

  Header('Location:NewRequest.php');

  }

  ? >

  <? PHP

  $User = $_SESSION ['Pnom"];

  $result = $con-> query ("SELECT ALL * from newrequest where Fname ="$User"" ");

  $row = $result-> fetch_array (MYSQLI_BOTH);

  $_SESSION ["FirstName"] = $row ["Fname"];

  $_SESSION ['location'] = $row ["Location"];

  $_SESSION ['description'] = $row ['Description'];

  ? >

  <! doctype html >

  < html >

  < head >

  < link href = "CSS/Master.css" rel = "stylesheet" type = "text/css" / > "

  < link href = "CSS/Menu.css" rel = "stylesheet" type = "text/css" / > "

  < meta charset = 'utf-8 '.

  ReviewRequest < title > < / title >

  < / head >

  < body >

  < div class = "Container" >

  < div class = "Header" > < / div >

  < div class = "Menu" >

  < div id = 'Menu' >

  < nav >

  < ul class = "cssmenu" >

  < li > < a href = "Account.php" > account < /a > < /li > ""

  < li > < a href = "UpdateAccount.php" > update account < /a > < /li > ""

  < li > < a href = "NewRequest.php" > new request < /a > < /li > ""

  < li > < a href = "ReviewRequest.php" > Review Request < /a > < /li > ""

  < li > < a href = "LogOut.php" > sign out < /a > < /li > ""

  < /ul >

  < / nav >

  < / div >

  < / div >

  < div class = "LeftBody" > < / div >

  < div class = "RightBody" >

  < name of the form = "form1" method = "post" action = "" >

  < div class = "FormElement" >

  < label for = "FirstName" > < / label >

  < input name = "FirstName" type = 'text' required class = "TField" id = "First name" value = "<?" PHP echo $_SESSION ['FirstName'];? ' > ' >

  < / div >

  < div class = "FormElement" >

  < label for = 'Place' > < / label >

  < input name = "Location" type = 'text' required class = "TField" id = 'Location' value = "<?" PHP echo $_SESSION ['Location'];? ' > ' >

  < / div >

  < div class = "FormElement" >

  < label for = "Description" > < / label >

  < input name = "Description" required class = "TField" id = "Description" value = "<?" PHP echo $_SESSION ['Description'];? ' > ' >

  < / div >

  < / make >

  < / div >

  < div class = "Footer" > < / div >

  < / div >

  < / body >

  < / html >

  You would browse the information stored in the $result variable.

  $result = $con-> query ("SELECT ALL * from newrequest where Fname ="$User"" ");

  As below:

  fetch_assoc()) {? >}

  (I don't see a reason to assign data to a variable of $_SESSION?)

  You also probably would be well advised to select information based on a uniquie rather than a name id - if two people have the same name youre UNLESS you want to make sure that two identical Fname can be stored in your tabe stuffed.

  $result = $con-> query ("SELECT ALL * from newrequest where userID = '$userID'");

  userID |     Fname |     Location |                      Description

  8 the end of the road muddy and foggy

  11 this something, no idea

  8               the              rstreet                           rah

  8 is not a clue

  14 Hello Goodbye

• CF8 cfquery multiple table join with the same names of columns - default

  This seems to be a defect in the CF8 cfquery object. I'm at a loss as to a solution or a good work around. With regard to the substance, this query is generated dynamically on the fly based on what is happening in it a user. This isn't the most elegent SQL but work and return all columns. The app itself is a data viewer to look at the logs. Here is an example of a query being generated.

  Select *.

  of web_trans, web_info_trans, web_res_trans

  where (web_info_trans.trans_dte > = '' 2008-12-1)

  and web_info_trans.trans_dte < '' 2008-12-2)

  and (web_info_trans.trans_dte = web_trans.trans_dte)

  and (web_info_trans.trans_num = 5060345)

  and (web_info_trans.trans_num = web_trans.trans_num)

  and (web_res_trans.trans_num = 5060345)

  and (web_res_trans.trans_num = web_trans.trans_num)

  and (web_trans.web_trans_cde = "NTUI")

  and (web_trans.web_status_cde = 'P')

  and (web_trans. TRANS_NUM < 5060347)

  order of web_trans. TRANS_NUM / / desc

  These three tables contain a similar column called ZIP_CDE. They contain different values, and when this query is executed in Microsoft Query Analyzer results are displayed correctly. Run this same query SQL with CFQUERY and the value of one of the other tables (web_trans) will eventually replace the value for the other columns called ZIP_CDE. The exact amount columns are retruned only values some how get corrupted.

  This is a defect of cf8 is a book autour or an update that resolves this problem that I may have missed?

  Thank you for the ideas.

  Thus it seems still as a default since CF is essentially where, except for the return value play. Other query tools return results correctly so for me, it turns out be CF bug at a certain level.

  Actually I'm swinging to agree with you here, but not for the same reason.  CF actually * is * get all the columns back (as you say), it just doesn't expose a way to tell the difference between a column called 'x' and an another column called 'x', because the way to access the data in columns is simple queryname [columnName] [rowNumber] (or a Variant fo this, but all the amount of variations to that or abbrev. it).  This code shows how he has all four columns of the original two queries (being a stand-in for tables, in this case):

  
  Q1 = queryNew("");
  Q2 = queryNew("");
     
  queryAddColumn (q1, 'id', [1,2,3,4]);
  queryAddColumn (q1, "data", ["one", "two", "three", "four"]);
  queryAddColumn (q2, 'id', [1,2,3,4]);
  queryAddColumn (q2, "data", ["tahi", "rua", "toru", "wha"]); It's Maori, in case you are interested
  

  
  SELECT *.
  Q1, q2
  WHERE q1.id = q2.id
  
  

  So CF knows there are four columns (a call getMetadata (q3) get also demonstrates this), but it does not expose a way to approach the second (or even greater) column of the same name.  This is the bug/shortfall.

  However, relying on an underlying coldfusion.sql.QueryTable method, you can rename the columns, so:

  Then you're OK.

  I would be normally reluctant to recommend doing this, because these methods change from version to version of CF, but it's your call whether this approach will help you.

  To be honest, I'm with Owain who, even in SQL one generally doesn't work with columns with the same name, an alias them qualified with a table name/alias. As the table columns from of is not returned by SQL with the result set, it must be evidence against this by folding the columns in the first place.

  Also, I wonder at the bottom of the extraction of data, you don't really know the structure, that is to say, do SELECT *.  How can you know not even that is ours as the first column, second column, etc.?  I don't think that SQL applies in fact a contract that, t - it?  (I don't know).

  What are you actually do here?

  --

  Adam

• I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  I recently blocked my macbook pro using find my iphone app now, he continues to display in 'your computer is disabled. Try again in 60 minutes. I tried pressing the option key and also the R button at startup. same thing is happening.

  Hi iambjan,

  I understand that your MacBook Pro has been lost by the intermediary of find my Mac mode. Fortunately, you can go to the off mode lost through the steps described below.
  

  You can disable the lost Mode by entering the password of the device, or by following the steps below. Alternatively, you can follow the steps below to change the details displayed on your lost device.

  Note: If your credit cards and debit to pay Apple have been suspended because you put your iPhone in lost Mode, when you disable lost Mode and reconnect to iCloud, you can continue using your cards.

  1. Go to find my iPhone on iCloud.com.

     If you don't find my iPhone on iCloud.com, your account has fair access to the web features only iCloud. To access find my iPhone and other iCloud features, set up on your device iOS or Mac iCloud.

  2. Click on all devices, and then select the device that is lost.

  3. Click on lost Mode, then change the information or lost the stop Mode.

  If you cannot use lost fashion as find my iPhone is not configured on your lost device, see the article by Apple Support If your iPhone, iPad or iPod touch is lost or stolen.

  SEE ALSO
  Remove credit and debit of the portfolio (or book) maps

  iCloud: use lost Mode
  https://support.Apple.com/kb/ph2700

  Kind regards.