I want to change my win8 to winxp for my laptop, but I cannot driver for the sata controller.

Similar Questions

• How can I change my att iphone 4S for the sprint network

  How can I change my att iphone 4S for the sprint network

  You can not.  AT & T phone is a GSM, CDMA Sprint.

  Sorry

• What should I do if I want to format my laptop but I don't have the recovery

  Hello

  I have a Toshiba Satellite Pro P100, about 5 years ago I bought it.

  Here is the story, I want to format my laptop but I don't have the recovery or Installer Windows Vista DVD disc, the operating system is pre-installed when I bought it. I know that I can download all components/drivers Toshiba Support page. But how I format without Installer Vista? I have the vista product identification number, so I wonder it works if I format it with vista ungenuine copy, but key ID I have to run it?

  Thank you very much. All solutions would be very appreciated.

  See you soon
  Wolf

  Satellite Pro P100 is old model laptop and I do not remember if this model was delivered with or without recovery DVDs. It turns out that all the models shipped without installation disc recorded on HARD drive data recovery and computer laptop owner is able to install this recovery image using HARD drive recovery facility.

  Second option was using recovery DVD creation preinstalled Toshiba recovery disc creator tool. How it works and how to start the HARD drive recovery is described in s manuals that you got with your laptop computer in pdf format. You can also download manuals of this Toshiba support page - http://eu.computers.toshiba-europe.com > support & downloads.

  So what you can do like the first, is to check if can begin installation of HARD drive recovery.

  Otherwise, you must install OS using the Microsoft installation disc. As you already know, all of the drivers needed, tools and utilities that you can download at Toshiba supports the page.
  Microsoft product key that you saw at the label belongs to the version of the OS pre-installed and cannot e used for activation if you install OS on your own.

• I want to re - install windows xp on my laptop but I don't have the resource cd. I don't have the product key. What can I do?

  Please

  I want to re - install windows xp on my laptop but I don't have the resource cd. only I have the key to product label I can do?

  also my frist question is that if I install this version (xp sp3) with my product key, it will be legal?

  The downloaded file CANNOT BE USED TO INSTALL WINDOWS.

  It is not a question of legal or non-legal.  The file you download is not complete.  The downloaded file will update an existing installation of Windows XP Service Pack 1 or Windows XP Service Pack 2 for Windows XP Service Pack 3.

  Right click on my computer, then select Properties.  The screen say for your version of Windows, including Service Pack?

  Re-installation of Windows may or may not be the right solution for your problems.  If you want to re - install Windows, read this article on the Toshiba site--> http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/outFrm.jsp?ofId=AskIris&searchString=restore+windows+xp&x=7&y=9 in particular the section titled "using the recovery partition Toshiba HDD recovery utility '

• I would like to have the best possible experience for the games on my laptop and I want to download everything that is necessary for the performance of the games.

  I bought a new laptop which has Windows 8. I heard that Windows 8 is new, it only is not automatically provided some 'things' - forgive me for my lack of knowledge in technology. I intend to play games on my new laptop, but according to my knowledge, Windows 8 does not support things like Visual C++ and Directx 9. I am very uncertain about this subject, however. If anyone understands this as am I mean, can you please correct and/or explain more on this topic? I would like to have the best possible experience for the games on my laptop and I want to download everything that is necessary for the performance of the games.

  Original title: what's missing in Windows 8?

  Jack

  We were all new at one point, so don't worry what you know.  Win 8 is compatible with all previous OS.  It supports C++, and depends on your video card supports DIrectX 9, 10 and 11.

  The only thing that doesn't come with win 8 (and since you bought it, it may already be installed) is windows media player.

  What exactly are you trying to do, or can you give us more information for we can help you better?

• Hello, I changed my plan of photographer for the individual user, but apps to say that I did not at all of any subscription and I should buy another subscription. What should I do

  Hello, I changed my plan of photographer for the individual user, but apps to say that I did not at all of any subscription and I should buy another subscription. What should I do

  Please visit:https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  Check the host on your computer files.

  I hope this helps.

  Concerning

  Megha Rawat

• How can I change my fill of tru for the pdf file and the sign? It will never change.

  How can I change my fill of tru for the pdf file and the sign? It will never change.

  In Adobe fill & sign you can add text, checkmarks, an X, a point and a circle and sign documents.  It does not "change" the existing content of the document.  Here is a tutorial: Tutorial: Introduction to Adobe fill & sign

  Thank you

  Josh

• DW CS6 test server shows only the login screen of my site. Can't do under the hood live wiew. The pages I want to change/modify is visible only when I connect but I do not know how to reolve that.

  I'm trying to edit a CMS site to my needs and "open" pages is not serious, that is to say those that do not require the user to connect to. I can see and I can modify them according to my needs.

  The trickiest part is when I want to change/modify something inside. Then it wont let me. The only thing I see is the "Login" screen I can see the code and I can do what I need, but when I turn on 'Live wiew' is the log in page that greets me

  
  Tests of servers is correct because I can use it in my localhost

  Connection MySQL works as it should (Test OK)

  I guess that's something that has to do with permissions, but I don't know what.

  A CMS site, the page is usually filled with data that is stored in a database using a scripting language on the server side. Unfortunately, the Design mode only supports a static language like HTML, there is therefore no recovery information from the database.

  The only way out of your situation is to temporarily remove the permission to the user to the page that you are editing so that you do not to log-in each time. The problem is that you may forget to reactivate the authorization.

  What I always do is to open the site in a browser and verify the change in DW refreshing the page in the browser. In this way, you need to log-in once.

• Epson print driver changes both margins to address for the envelope printing. Three other printers print the addresses of envelope with correct margins.

  I bought a new all-in-one Epson Wireless WF-3540.  So new Epson technical support people had one to test my problem.  I like it a lot because it has two trays cassette for 250 pages each, and a page break back.  For the love of the work I do in this description I use the back form feed on the Epson only.

  Suppose I have a business letter in Word 2007 using Windows XP Pro.  My default printer is a HP 932 C.  I click on Mailings, Create, envelope and print it.  The result is the number 10 envelope with the address of the left retour.3,.3 of the top and the address of destination 2 inches high and 5 inches from the left.  Exactly the way I want it.  A selection button.

  Suppose I have install the new Epson WF-3540.  I opened the business SAME letter in the same Word 2007 using Windows XP Pro.  This time around with the Epson WF-3540, I followed the same procedure for click mail merge, Create, envelope and print.  The result is an envelope of number 10 with the return address 1.5 inches from left to right top et.4.  The destination address is 3 inches from the left and the top 2.25.  The non-professional delivery address looks and interferes with the USPS standards.

  I worked on the problem for two days.  I was on the phone with Epson for a total of four hours.  Here are the various attempts to set this right using the Epson WF-3540.

  1. in the Ribbon to create open envelopes, click options, and set the margins for the return and destination addresses as I would like.  I always use the et.3 valeur.3 return address and the destination address in 5 and 2.  I put these values in the options, click OK.  Print the envelope, and it is printed as I've described above with Epson.  In looking at the options for envelopes that they were changed to Auto.

  2. I have a test with the help of the same letter of businesss, Word 2007 and Windows XP.  I set the default printer to the HP.  This time I select envelope, add to the document.  I see an image of the envelope, watching leaders aside, it looks I want.  I close Word 2007, without saving the changes.  I have change the default printer to the Epson, open Word, the same letter from the company and select the envelope in the document.  It seems to appear in the same strange settings how it prints.

  3. I tried to change the margins of the envelope in the document with Epson as default.  When I try to print it throws an error telling me that I am trying to print outside margins.

  What are the effects of the behavior of the default printer?  Why the change in the appearance of the envelope both printed and in the document when I change printers.  What does the print driver? has to do with the formatting?  The installation of the Epson gives something in the registry that control margins almost anything.

  Epson told me there is no problem, but they are ready to buy the printer back to me.  Remember that they don't even have one to test on.

  I tried adding some dummy printers, without the actual printer and using the drivers only.  For example, I added an Epson ActionLaser 1100.  When I set it by default and use the same letter sales and Word 2007, I click on the envelope and add it to the Document, the addresses on the envelopes are exactly where I wait until they are, using the ruler on the side.

  What is - this subject a new printer is to control this mess?  I'd love to keep him.  I do a lot of letters and need the rear feed and must be able to one click printing envelopes.

  I had the same problem with my Epson WF-3540. Came to this site looking for the answer after the Epson site doesn't seem to have an answer. After reading the posts, I went to the printer, and I gave it a try more. I found what seems to be a solution but not transparent, that it worked.

  I noticed that when I tried to print the envelope property printer box shows the paper letter size (8 1/2 x 11) and not an envelope (#10). I changed the setting as the skin #10 and checked manually minimize margins. I then used the button Add presets save this as # 10 envelope as a new preset. This allows to print the envelope in the current printing of the page with the ability to use almost the entire surface of the envelope. You then switch to printing standard predefined when you are finished.

• Change file Association by default for the Edit action (but not the Open action)

  When I right click on a jpg file and choose the EDITING command, it opens up the PAINTING.  How can I change the default EDIT to jpg in Photoshop instead?  I don't want to change the default OPEN association for Windows Photo Viewer jpg files.  I want to only change the default value of the EDITION.  Thank you.

  Hello

  By default, the painting opens when you edit a photo.

  To open a file with Photoshop:

  a. right click on the image file

  b. select open with

  c. and choose Photoshop from the list.

  d. who should open the file in Photoshop.

  Diana

  Microsoft Answers Support Engineer

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Change of name of folder for the user account

  I changed my name of user account in Windows. But my folder name of user account in "C:\\Users" is still the old man. There is no option to rename the folder. How can I rename it?

  You cannot rename the folder because too much is bound to the file. If you want to change the name of the folder, create a new user account.

• Aftermath - change slides duration to account for the different lengths of video/image

  HI - as you can tell I'm pretty new to Ae - I use programs like hearing and first every day from work but I've never used after effects. Asked me to create a showreel by using After Effects. Like most "newbies" I headed over to a stock site and downloaded the following model https://videohive.net/item/clean-media-slideshow/15003701

  It all seems simple drag and drop the media in each slide / edit text etc. BUT I noticed that /(comps?) slides appear to be of a fixed length - I was wondering if there is a way to change the "timing" of each of these slides to account for the different lengths of video/still (while keeping synchronized animations)? Any help would be much appreciated - here is a link to what I've done so far Craig Jackson - stuff more After Effects - put... | Facebook

  I know there are tutorials on here and on sites like Lynda - and I started to go through them - but any help would be amazing.

  Kind regards

  Craig.

  I see that it's much better now, thank you.

  Here's the problem with the models. To make them easy to customize, they are awful to customize. I know it's not supposed...

  They have complicated - sometimes more than necessary - which makes them easy to drop your own photos/videos. However, this means that if you REALLY want to change something, it's going to be quite complicated. I only buy templates if I want exactly what the model has. Otherwise, it's actually faster for me to build myself something. I have over a decade of experience with After Effects, so trust me on this, don't mess with the model. Without much more experience, he'll just be frustrating.

  What you can do, is switching to the video full screen. You need not stay in the template all the time. Put your video and images in the template, but there where you want it to be longer, put the beginning and ending in the model. Then, after you have made out of AE, go in first and just cut (or use a transition from light leak any) full screen video for executives, want to be longer. TADA!

• I want to just my tabs to load for the link that they were originally planned. Instead, I get the last visited page or tab has been disconnected.

  I have 'show my Home Page' for the startup option
  I have LastPass value AutoLogin
  I have cookies for sites tab in the Cookies Exceptions list

  Despite all this, the tabs are "déconnecté" when I restart Firefox and sites that have no connection are not open on the web address, the tab was origianlly.

  In case you use "clear history of Firefox closing:

  • do not erase browsing history
  • do not delete Cookies
  • do not delete Site preferences
  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

• How can I change spelling of e-mail for the French of English America?

  How do you change the email for the French spelling checker in American English.

  http://support.Microsoft.com/kb/933142

  See if the above is what you are referring.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I change the SATA controller to ide on hp pavilion dv6-6c50us with windows 7 Home premium? I want to install win xp on my external hard drive.

  while I try to install win xp on my external hard drive using my computer with win 7, an error with blue screen pop out.

  ERROR: 0X0000007E

  ACPI.sys address F73B8D66 base at F73AD000 DATER 41107 27

  You will need to load the BIOS and make the change.