I want to generate a pulse of a meter train and count the pulses with the other counter on a USB NI DAQmx 6259.
Salvation;
Here is the solution for your problem.
The cause is that "Gen dig Pulse Train-Finite" uses Ctr0 both Ctr1.
Please refer to:
"When you do a finite pulse train generation, a counter generates pulse train, and the other counter generates an impulse that acts as a barrier to the first counter. If you change the pulse train to generate continuously or
only generate a pulse, you can run two tasks of meter at the same time without error. »
http://digital.NI.com/public.nsf/allkb/04BEDD9E9E91ED3486256D180048116D
I used Ctr0 and Ctr2, jumping Ctr1 as it is reserved by "" Gen dig Pulse Train-Finite ". I works very well.
Kizito.
Tags: NI Hardware
Similar Questions
-
When I select emails I want to remove the delete button and all the other buttons in the same row do not work. This not only with hotmail, it seems to be with other applications, including on this page at the top where you have "Home, office, int explore" etc... It happens to be in this part of the page, which can make? I ran anti mailware, anti-spyware and Windows Security Essentials found nothing and they all date please help
original title: send probsHi cooljae,
The question you have posted is related to Windows Live hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support. -
my mother has two computers that are running windows 7 and she wants to give me one of them, but it first wants to transfer or share all his stuff from one to the other. We network cables and such can I connect the on computers and share information from one to the other?
Hello
To connect two computers with a cable, not a router, it must be a crossover cable.
These are special cables, but they are not expensive.(You can configure a network or a host group (see below))
Connect two computers using a crossover cable (XP - Windows 7 may be the same)
http://Windows.Microsoft.com/en-us/Windows-Vista/connect-two-computers-using-a-crossover-cableIt is a description however computer stores will sell them at low cost.
http://en.Wikipedia.org/wiki/Ethernet_crossover_cableAmazon - example of a crossover cable
http://www.Amazon.com/Belkin-components-CAT5e-crossover-cable/DP/B000067RFT--------------------------
You can also use Easy Transfer
Transferring files and settings: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questionsHow Windows Easy Transfer makes setting up a computer easier?
http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easierWindows 7 Easy Transfer
http://Windows.Microsoft.com/en-AU/Windows7/products/features/Windows-easy-transferHow to get an easy transfer cable
http://Windows.Microsoft.com/is-is/Windows7/how-to-get-an-easy-transfer-cable------------------------
These should help:
Create a homegroup
http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroupHomegroup from start to finish
http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finishAccess to files and printers on other homegroup computers
http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computersFile sharing essentials
http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentialsShare files with anyone
http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone=========================================
More help at these locations: (Vista references also apply to Windows 7)
Vista - LAN
http://www.onecomputerguy.com/Networking/vista_network.htmVista network and sharing Center
http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htmSetting up a network home
http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-networkHome network, wireless network and computer networking Made Easy
http://www.home-network-help.com/Windows Vista tip: How to install and connect to a wireless network
http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.htmlNetworking tutorial home
http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
Practically networked - everything you could possibly want to know.
http://www.practicallynetworked.com/I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
How to generate a pulse with the signal generator?
Hello
I would like to ask if anyone knows how to use the Elvis platform to generate a regulated pulse wave?
It should look roughly like the picture above. A sine wave with the regulation.
Anyone who can answer my question please respond to my post.
Thank you.
You are using LabVIEW to generate the waveform or using the Soft front panels? In LabVIEW, you can use the express VI generator function and specify the Type as "Sine". Then, simply change the amplitude of the sine wave. During the actual pulse, the amplitude would be what you want (i.e. 1 V) and while the pulse is idle, set the amplitude to 0.
If you use the soft front panels, you can use the Waveform Editor to create a waveform that includes a sine wave for the length of your pulse and then the values of '0' for the rest of the time. Then use this waveform in the flexible front of the arbitrary signal generator. Simply create a component of sine as the first part of the wave and then add another element to a level DC '0' for the rest.
-
How can I generate a digital pulse with a specific width? I was not able to find examples online. Thank you!
With the USB-6000 - essentially none. He has only digital software programmed according to i/o. on your system, you may be able to generate impulses at speeds up to a few hundred Hertz, but there will be a considerable amount of timing jitter. Tens of milliseconds can be common and even longer variations may occur occasionally.
Please indicate which are the times for your impulses, so someone may be able to provide recommendations specific to your needs.
Lynn
-
original title: network connections
I want to set up a link between my computor and my brothers through the internet in order to control and maintain. How can I do this >
Hello
Maybe this can help.
-
Want DV7 - 7227cl adding an ssd as boot drive and keep the original as a data reader drive.
I want to do this and use the software that came with the laptop, not go out and buy more.
Anyone with an idea how to do this... now the laptop is booting from the SSD and the physical disk is removed, because she takes as boot drive.
Thank you and please do not suggest the online chat, all came from there and was no help.
Hello cboycam,
Your owner's manuals can be beneficial as well, especially the HD and SSD identify, prevent, diagnose and recovery of the failure of road and maintenance Guide.
Good luck!
-
want just a touch "impression" on my hp 5520 not all the other stuff
I have a printer HP 5520 and just want a simple button print to print from my documents, he wants to make 1 million other things, lack of my old Canon, please help...
Hello
The 5520 does not directly support print a document, you can print from an application on your computer or other devices.
Kind regards.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
FWIW... It is always better if you include your question
in the body of your message.Your Boot.ini file needs to be edited... you should know
You can make your computer useless if you
do not pay attention.Proceed at your own risk *.
Perhaps the following goods range offers a few ideas:
(Search Google will find much more information)How to remove both Windows XP Professional on the boot
http://www.ehow.com/how_6945283_delete-Windows-XP-Professional-boot.html(289022) how to edit the Boot.ini file in
Windows XP
http://support.Microsoft.com/kb/289022How to use and edit the Boot.ini file in Windows XP
http://vlaurie.com/Computers2/articles/bootini.htmAdditional information and help with the boot.ini file.
http://www.computerhope.com/issues/ch000492.htmGood luck...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I hope someone can help
Visit the HP website and to see if updated drivers are available - if you have previously used winupdate to try drivers HP roll back the driver
-
Please note that I have Windows 7, thanks for your help.
y.b
Hello
You can find detailed information on how to print on both sides paper for your product here:
http://support.HP.com/us-en/document/c02773085
I hope this helps.
-
at the same time production and measuring the pulse
Hello everyone,
I'm generates a pulse for specific time. Now, I want to measure within the same daq card. I've done Vi for him but he has an error. I have USB daq-6343. I enclose my Vi here.
The problem is I am able to get pulses generated at PIN 6 PFI but reading Vi watch time-out error.
I plugged the wire between PFI 1 pin and PFI 6 pins on the DAQ card.
So please suggest me what to do to eliminate this error.
Thanks & best regards,
I just looked at your original vi, I had looked only at the most distant (corrected) a previously. I don't see a good reason to read timeout error you have immediately. Record of an error timeout on your attempt reading suggests that the code was executed without error so far, including the beginning of the generation of pulses. That would leave wondering on physical cable connection or possibly some undesirable side effects caused by your cleanup code when you three States a PFI lines.
The other issue was my suggestion to leave DAQmx Timing.vi outside of the configuration string entirely for cases like this where you only want to build a single pulse. To be honest, it's a habit & practice I adopted a long time ago. I thought one of the reasons was that the finished pulse trains required a minimum of 2 samples. A bit of test code showed me that it isn't true, if my memory tells me there was a time when it * used * to be true. I don't remember if I have errors or if the task has chosen to generate 2 pulses with just a warning, or something. I just remember that, while he was working on a module that was supposed to be able to produce any number of pulses from 1 to N, I found that I wasn't actually able to support the case of 1 pulse by asking just 1 sample over sample mode.
* Anyway *, the other reason to avoid sampling over for a single pulse mode is that in the past, this would consume actually 2 counters on DAQ cards. Generated the pulse (s) while the other was a help that triggered the first to control the number of generated pulses. It was unnecessary as you could * also * generate a single pulse leaving the DAQmx Timing.vi out of the config, a method that used only 1 meter.
X-series cards (like yours) don't consume over 2 programmable counters of the user to generate finite pulse trains, so the lesson I learned a long time ago and was trying to convey is perhaps not so important in your case. I recommend it even if you know that you will always generate a single pulse, simply because he considered the standard way to generate a single pulse (as seen in examples of navigation).
-Kevin P
-
How to generate two pulses per cycle? PCI-6251/6255
Hello. I want to generate two or more pulses per cycle like the timming diagram. This pulse will be used to trigger the sampling data.
I am ussing the PCI-6251. The VI examples to counter outputs can easily generate the first line, but the second I have no idea. All information can help.
Another problem could be the synchronization of this lines and data acquisition.
Concerning
Ivan C.
I would like to use the digital outputs for this - just generate a continuous at 1 MHz clock using one of the counters and write the following in your digital output lines:
H H H L L L L L L L
H L H L L L L L L L
If you want to use these signals to pick a different spot on the 625 x, you the output of wire in a PFI lines.
Best regards
-
How can I more easily generate a pulse of digital output of finite length?
Hello
I need to open and close the two pneumatic valves using a TTL output (without load current or the output power) using a PCI-6280 or PCI-6601. The valves must open almost simultaneously and closing after different amounts of time elapsed (millisecond level timing, maybe 100 microseconds-level timing at worst). My current plan is as follows:
-Create a task with two digital outputs (type of waveform) and another task with a counter that generates a frequency set by the user (I know I can use the generator frequencies on one of these cards, but I would have preferred a counter - the best selection of frequencies).
-Wire the output of the counter at the entrance to clock two digital outputs.
-Output of the meter is digitally triggered by another digital channel which I use to control if the pulse goes out. Through its counter node, it is programmed to be redeclenchables.
-Two digital waveforms are drafted who have both consist of unique active high pulse (i.e. signals go ' down (for the amount of time user-defined) - low ".")
-These signals is written to their respective ports and their tasks have started, as is the task of the meter.
-Whenever the user wants to open taps, digital triggering is sent up and then back to low (this can be done with synchronization software, because it is not exactly when the fire valves). Whenever the user wants the valves open for a different period, different digital waveforms are generated and written in the buffers of the digital output channels.
My problem is that it looks like a lot of effort for me to go and I wonder if there is a much simpler solution, that I don't know everything. You can program a computer to produce a pulse of finite length? Is there a faster way to program a digital output for that channel?
Thanks to anyone who responds to their help.
It is certainly instructive. Thank you.
The thing is, I have only six total counters to work with and I have a lot of time to do things. To use these solutions, I would need to use 4 or 6 account counters required to my needs.also that I would need to synchronize their departures.
Overall, I stick to my method for now - less system resources and synchronization can be don by using the same meter of finished output clock and not to use a trigger to all.
Once again, thank you for your help so far.
-
How can I specify a delay generates a pulse meter?
Hi all
I have a question on the use of the meter to generate the pulse train. I did not how to program but I try the test panel in MAX and I see that it generates pulse train to certain rates and with a pulse duration. I think if it is possible to generate only a single pulse with given the duration of the impulse to sometimes after I start the job? I have a code to generate an analogue waveform, waveform of 35ms. I wonder if it is possible to synchronize the output of the analog waveform and counter such to 12.5ms after that the output waveform has started, I send this unique pulse from the meter port on. I have no idea how to do that, I think to use a delay but it is difficult to accurately control the time exactly 12.5ms.
Well, assuming DAQmx_Val_Low for the resting State, fires the meter will wait the initial delay and then generate a pulse at the time you request. Little time is not actually used in this example simple impulse.
From what you described, you must add a trigger to start your task of meter output (DAQmxCfgDigEdgeStartTrig) to you can set the meter to trigger off the beginning of analog output trigger. Set the initial delay on the counter for 12.5 ms. Start the task of counter in front of the task of the analog output. You should get your pulse 12.5 ms after you have started the task of the AO.
Best regards
Maybe you are looking for
-
Banned URL: how to access?
I am trying to access a URL that I know for sure is valid, but a forbidden message Url appears. What can I do? Thank you!
-
Satellite Pro A10 - Win 7 with WLan PA3171U-1MPC
Hello I have a Satellite Pro A10 with a PA3171U-1MPC Wireless LAN Mini PCI Card, 160 GB HARD drive and 1 GB of RAM, I want to upgrade to Windows 7 for my son. He worked in XP before.States of Windows 7 Upgrade Advisor:"Before installing Windows 7, go
-
Pavilion 410y - I got a computer for one year. Today, I decided to take some dv camcorder tapes and put them on DVD. I have a DV firewire cable and a camcorder to the USB CORS, also avi connections. None work with the computer. No firewire port, no p
-
Tecra A2: Wireless after the new XP installation
Hello I have a Tecra A2, which was not long ago a clean version of XP is installed. Since the built-in wifi adapter is not recognized by the system (does not yet appear in the Device Manager). Note: switch wifi on the side of the laptop is on. Does a
-
Missing PCI of Simple Communications controller
What happens (or not) when this device and driver are missing? And where to find and how to install it? Thank you