I want to generate a second report to the test.

Similar Questions

• Interactive report with the subreport Details on the same page

  Hi all
  
  I am fairly new to APEX, sorry if my question is too obvious. I use Apex 4.0.2 on top of Oracle 11.2.
  
  I have an interactive report that lists the contents of a table. Since there are a lot of columns in this table I would like the report to only show that some identifier columns and all of the currently selected folder is displayed using another report in a separate area on the same page.
  
  The 'link' on the interactive report column is almost that, except that he jumps on another page; I would just like to have a subreport, updated with the data that is selected instead of a new page is displayed. Does anyone know how to do?
  
  Thanks for your help,
  Chris

  Chris,

  This looks like what I usually do in my referential data.

  I use the wizard to create the "report."

  I make sure that the two regions (the form and report) will be created on the same page number

  so I check/change the order of regions (second report in the first place, form)

  then I put in the form to display in the column 2

  Kind regards
  Richard

  P.S., the report shows only enough columns to recognize records. the screen displays all records

• Report of the year several

  Hi all
  
  I have a report prompt based on the year. I have 2 sections of report either we should display the prompt value-based report and the other report should show a value larger than that. Ex: If I select the year 2005 in the prompt the first report should display 2005 data and the second report should display reports more than 2005, 2006,2007 data.
  To do this, I created prompt as below.
  Column-> Calendar_Year
  -> Equals Opertaor
  Control-> drop-down list
  Show-> all values
  -> The default server Variable
  Set Variable-> presentation Variable.
  Name of the vAriable-> yr_val
  
  In the reports, I used the filter year = @{yr_val} for the first report and year > @{yr_val} for the second report.
  I'm getting first report properly but second report shows the same data rather than the selected value years.
  Please let me know how to achieve this.
  
  Thank you
  Venerable.

  for the second report first convert this filter sql and put > @{PV_VAR}. Take care of the syntax.

  This should solve the problem.

  Kind regards
  Sandeep

• Install second connection to the web server at DB 10R2 running Apex 3.0.1.00.08

  All,
  
  I'm trying to add a second web server to move a part of the web traffic to another resource. I have a 3.0.1.00.08 instance that runs on the database connected to the web server and I just wanted to add a second connection to the front-end web server.
  
  The second is web server currently running SOA suite so it was logical financial to simply add another call on this web server.
  
  ServerA (existing web server) to connect successfully to the server b (existing database server).
  ServerC (new web server) to be connected on server b.
  
  Directory copied apex and images ServerC ServerA
  
  TNSNAMES. ORA on ServerC located under ORACLE_HOME\NETWORK\ADMIN
  ORCL =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = ServerB.Address)(PORT = 1521))
  )
  (CONNECT_DATA =
  (SID = ORCL)
  (SERVER = DEDICATED)
  )
  )
  
  Server c, I use SQLPLUS to connect to server b using APEX_PUBLIC_USER, correct password, ORCL
  
  Change ORACLE_HOME/Apache/modplsql/conf/dads.conf on ServerC
  
  Alias is ' ORACLE_HTTPSERVER_HOME\Apache\images / '.
  AddType text/xml xbl
  AddType text/x-component htc
  < /plex location >
  Order deny, allow
  Docs PlsqlDocumentPath
  AllowOverride None
  PlsqlErrorStyle DebugStyle
  PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
  PlsqlDatabaseConnectString cn = orcl, cn = oraclecontext NetServiceNameFormat
  PlsqlNLSLanguage AMERICAN_AMERICA. AL32UTF8
  PlsqlAuthenticationMode Basic
  SetHandler pls_handler
  PlsqlDocumentTablename wwv_flow_file_objects$
  PlsqlDatabaseUsername APEX_PUBLIC_USER
  Apex PlsqlDefaultPage
  PlsqlDatabasePassword correct_password
  Allow all the
  < / location >
  
  Restart HTTP_SERVER on ServerC.
  
  I get the error:
  Journal of the database failed
  
  TNS is unable to connect to the destination. Address provided is not a valid TNS or destination is not listening. This error can also occur due to underlying network transport problems.
  
  Ensure that the TNS name in the entry of the DAD for this URL connection string is valid and the listener of the database is running.
  
  ORA-12170: TNS: Connect timeout occurred error-Code: 12170 error TimeStamp: kills, 16 December 2008 20:35:58 GMT
  
  I thought it was weird since it's what worked on the other server and using sqlplus.
  
  I also tried to change the dads.conf file to use the following connection string:
  PlsqlDatabaseConnectString SERVERB:PORT:ORCL ServiceNameFormat
  
  No luck. Why the connection work with SQLPlus and not modplsql? What I am doing wrong? If not, how can I solve this?
  
  Any ideas?
  
  Thank you
  Keith

  Keith:

  Try to use the "SIDFormat" in dads parameter 'PlsqlDatabaseConnectString' instead of 'ServiceNameFormat '.

  CITY

• Display the text in the second page of the report.

  Dear Sir
  
  I have a report with Group G_Emp, with Eno columns, Ename etc. in a repeat structure R_1 and
  I put a framework under this R_1 extensible framework with a text element just to post comments, just so I want to display this text element in the second page and the details of the employee in the first page, the restriction is that the text element should not appear on the first page.
  
  I hope you understand,
  pls help.
  
  
  Ephraim of Stalin...

  Hello

  As I understand it, maybe you can try this:

  or) for your A-frame under the expandable chassis specify page break before = YES

  (or) and if I understand your meaning correctly you want your comment to show only once, on a separate page of last-->
  in the page layout section move the sdesign for your A-frame of the main section in the traileer section.

  Best regards, E.

• Fixed example of 'Generate an Excel report'

  I recently answered a question posed by a user of the Forum on an error occurred when you try to generate an Excel file with the report generation tool.  I thought that the code example he used was 'unusual' and too complex and just discovered that he was, in fact, the sample report template (Excel) 2013 'Generate' LabVIEW.

  In the spirit of trying to demonstrate it's nice "easy Excel' recent functions, I have rewritten this example and set here.  In doing so, I discovered (and reported to the NC) a "bug/feature" of the Excel function insert Graph.  One of its parameters allows you to position the chart by specifying the left and top edges (left would be the Excel column, would be the Excel line).  The only problem is that the parameters are reversed - to put the graphic on line 1, column G, you specify (0, 6), (6, 0).  Oops...

  Oops, I have attached an earlier version of the demo, which has no Documentation and has not been "cleaned".  Use this instead (sorry about that - I forgot to hit "Save" I just changed the VI).

  BS

• How to generate a report of the duration of the sessions remotely on windows server 2008 r2?

  Hello

  I have about 10 (local users, not domain) users who are loging in Microsoft Server 2008 R2 to use accounting and planning software (using RDS) remotely. I would like to generate a report for the time spent to see how many hours each of them had been registered. Ideally, I would like to see all of last year (2011). Is it possible to do? Thank you in advance!

  Stan

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Uninstalled McAfee Security, but I continue to the popup error report 'McAfee Security Center had to close"asking if I want to send an error report.

  Original title: error reports

  I uninstalled McAfee Security, but now I get the popup error report 'McAfee Security Center had to close"asking if I want to send an error report. When I click on 'do not send', another error report immediately appears. No idea how can I stop this? At the present time, I have 9 popups error report in my taskbar.

  Ed

  Hello

  This problem can be caused if McAfee Security is not completely uninstalled.

  1. Why did you uninstall McAfee Security?

  2 have you tried sending the error report?

  3. What are the content of the popup of 9 error report?

  I suggest you to uninstall McAfee completely the link security.

  How to uninstall or reinstall supported McAfee products using the tool of Consumer Products Removal (Development):

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  If the problem persists, then I suggest you to contact McAfee support:

  http://www.McAfee.com/us/support.aspx

  If you need further assistance on this topic, let know us and we will be happy to help you.

• I have a 8600 and you want to disable automatic fax report.

  I have a 8600 and you want to disable automatic fax report.

  Hello Sandy1959,

  Welcome to the Forums of HP Support! I understand that you want to disable confirmation of fax on your HP Officejet Pro 8600. Please follow the next steps in the front of your JO 8600:

  1. go in the Menu Setup (key)

  2. Select Fax Setup

  3. go in fax reports

  4. set the confirmation on OFF

  I hope this helps!

  Thank you

• I want to add a second DVD/CD drive

  I have a new Dell SPA 8700 and want to add a second DVD/CD. What should I look for? Thank you, Bob

  MagicBob

  I have a new Dell SPA 8700 and want to add a second DVD/CD. What should I look for? Thank you, Bob

   
  Need you a 5.25 "SATA DVD - ROM, similar to readers shown here:
   
  http://www.Newegg.com/product/product.aspx?item=N82E16827106393
   
  Also you will need a SATA data cable, there should be a SATA power connector spare already inside the case for extra DVD player.
   
  http://www.Newegg.com/product/product.aspx?item=N82E16812123282
   
  In addition, 2 x M3 x inches 1/4 long Hex head screws, to mount the drive.
   
  http://www.Newegg.com/product/product.aspx?item=N82E16811989012&cm_re=screws_kit-_-11-989-012-_-product
   
  Procedures to help install the reader [see pages 45/46] are here:
   
   http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_xps_desktop/XPS-8700_Owner%27s%20Manual_en-us.PDF
  
  Bev.
   
   
   
   
   
   
   

• HowTo generate by ESX report alarms?

  Hi all

  I use vFoglight v6.1 pro to monitor my VMware Lab Manager environment.

  It is needless to mention that I get tons of alerts several types.

  As part of my effort to reduce the amount of alerts vFoglight, I disabled a lot of alerts under Administration--> rules Admin &--> manage rules.

  I left only referring to my ESX memory alerts | swap | CPU which gives me more visibility of the State of my environment.

  The thing is I'm having a problem generating a statistical report that will give me specific information on how alertsI have on each of my ESX hosts by type.

  I need an easy way to show more of memory or cpu required and prove the increase of resources actually solved the problem.

  This must be done through vfoglight level reporting.

  I'll be happy to get assistance to each and every one of you, if you know the inner workings of the vfoglights.

  Thank you very much

  Nissim.

  Here are a few steps you can try:

  Navigate to the home alarms

  In the upper right corner of the dashboard alarms, set the time interval, you are interested. For example "7 d" for 7 days.

  To the right of the table of alarms in half the dashboard lower alarms, click on "filter alarm.

  In the field "Origin" on the popup filter, type in "VMW ESX" (this will filter the alarms for ESX most of alarms)

  The results of all ESX alarms for the last 7 days will be displayed, use the error Instances see the breakdown of the alarms tab how by host, but also the history of the health of these hosts in the selected time interval

  Use the Customizer button to export the alarms to Excel, and select export (it's the last option when you click the customizer, screenshot see attached)

  

• I want to install a second hard drive in my laptop (mSata SSD), so do I create a system dual boot with the same license Windows on each disc.

  Original title: Dual Boot Laptop

  I want to install a second hard drive in my laptop (mSata SSD), I have two programs to install that "do not receive the", so I can create a system dual boot with the same license Windows on each disc. I can run only one at a time, and it's the same pc/laptop.

  No, you can't, a second facility would be like installing on a second computer, you will need to purchase a second license.

• I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?

  I want to add a second hard drive for my Pavilion Elite HPE 410f. Recommendations?  Somewhere in the 320 to 500 GB range and I want a quick unit because it will be used for rendering videos.    Thank you for your response.

  Hello

  How fast is fast is the real question.

  Have you looked at hybrid drives OCZ? Expensive but probably the fastest option.

  Seagate also made a hybrid hard drive.  Good price... You will need a 3.5 "to 2.5" support if the player does not support.  If you install the drive in an empty optical Bay then you will need a 5.25 "to 2.5" support.

  Your other choice is 7 200 or 10 000 rpm traditional hard drives.

  Another option would be to add a PCI sata and two external hard dirves configured in RAID 0.

• I got a lot of C cloud photographers present (Lightroom and Photoshop).  I have an office and an alaptop on the plan and you want to add a second laptop.  How can I do this?

  I got a lot of C cloud photographers present (Lightroom and Photoshop).  I have an office and an alaptop on the plan and you want to add a second laptop.  How can I do this?

  Hello

  Please try to sign in and out activate Cloud Creative applications

  Concerning

• PowerCli script to generate the report for the VM and ESXi model

  Hello

  I'm trying to generate a report for the virtual machines to a domain controller that includes the operating system, Cluster and host of brand and model of ESXi, but for some reason any the ESXi info does not come through. Any help is greatly appreciated.

  Get-data center 'TEST ' |

  Get - vm |

  WHERE-object {$_.} PowerState - eq "Receptor"} |

  Select Name, @{N = "OS"; e = {$_.}} Extensiondata.Guest.GuestFullName}},

  @{N = "Cluster"; E={$_. VMHost.Parent}},

  @{N = 'Esxi model'; E = {Get-VMHost - VM $_.} VM | {{Select model}}

  The virtual machine has the properties of the host.  For your information "Model ESXi" use $_. VMhost.Model, $_ is the current information for pipeline for the virtual machine.  You did for the section "cluster".