I was doing my administrator disable
A guest account has no privileges to manage the tasks of administrators are toggle accounts.
You can try the Safe Mode to see if you can log in with the administrator account. Even if you have defined the disabled administrator account, you should be able to open a session without failure.
If this does not help, you need to restore from a backup or to reinstall the operating system.
Tags: Windows
Similar Questions
-
My appleTV 2 see no room for my computer. WIndow 7. ATT Uverse router 5031NV-030 firmware10.5.1.525917 - att. I have the latest firmware on everything. I tried turning point/disable ipV6, run as administrator, disable firewall... etc I tried everything. He used to work on Window Vista and a few old iTunes. I've updated to iTune and move to Uverse. It has stopped working. I thought the problem was iTunes so I've updated to the latest version of iTunes in Vista, then update to Vista and then install Windows 7 and then last iTune on Windows 7... I now have everything that the most recent and it still does not work. I have not the firmware on my router can be updated, but I think it's fairly new
There may be a setting on your router you can disable IPv6. Try this and also disable IPv6 on your NIC again.
-
I closed all my bars to see what I was doing in a game and can't get them ive looked everywhere back to find a way and cannot
This has happened
Don't know how many times
== I liquidated all three bars
The answer given TXGuy is for Firefox
-
I get charged 2.99 twice a month for 2 apps I had, but was removed a year ago because I was doing charged each month. I'm still get charged the 2.99, applications are deleted then, how can I stop this accusation occur and how I get my money back?
Deleting the application's not cancel subscriptions.
-
I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium. I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them. The test seems to be hanging around 21% so I don't know how well it will do
Hi A1W1LL,
A clean boot helps eliminate software conflicts. Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.
To perform the clean boot procedure, follow the instructions in the link below.
Step 1: Perform a clean boot
Step 2: Enable half the services
Step 3: Determine whether the problem returns
Step 4: Enable half of the startup items
Step 5: Determine whether the problem returns
Step 6: Resolve the problem
Step 7: Reset the computer to start as usualHow to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135After reviewing the issue, put the computer into Normal mode.
Uninstall or update the program that is causing the problem.If you are not able to boot to the desktop, you can try to restore your computer from WinRE.
1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press any key when the message "Press any key to boot from CD or DVD".
3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
4. click on repair your computer.
5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
6. in the System Recovery Options dialog box, click System Restore.
7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
8. click Finish to restore the system.Please post back and let us know if it helped to solve your problem.
Kind regards
KarthiK TP -
I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.
Original title: Winrscmde error message
I was doing a pop-up error box that says: Winrscmde has stopped working and was closed. A problem caused the application to stop working correctly windows will notify you if a solution is available. How can I stop this, I don't know what is Winrscmde or what it does?
Hello1. do you have this pop-up at starup?
2 have you made any changes to the computer before the show?Winrscmde errors are usually due to the corruption of registry files.Method 1:
Put the computer in a clean boot state, see if that helps.How to solve the problem by running the clean boot in Windows Vista:
http://support.Microsoft.com/kb/929135Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.Method 2: Run the checker system (SFC) scan files and check if it helps.How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833Method 3:
I suggest you make a system full scan just to be sure.
Here is a link that will give you information on how to perform a full scan of the system:
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest anti-malwaredefinitions, download and run the Microsoft Safety Scanner again., Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. -
After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Then lets refresh the USB stack
Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
all except the category itself - REBOOT - it refreshes the drive and battery USBThis KB shows XP how to and the method of Vista is identical
http://support.Microsoft.com/kb/310575----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problems------------------------------------------------------------------------------------------
If no joy, see Toshiba Support and/or their forums:
Toshiba support and drivers
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=downloadToshiba Support Forums
http://laptopforums.Toshiba.com/Contact Toshiba
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contactI hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good. -
I'm unable to download the updates for Adobe reader 10.1.1 victory win 7 claims I am connected as a guest when I am the administrator. disabled UAC and added another user still cannot update.
Original title: win 7 claims I am logged in as a guest when I am the administrator. disabled UAC and added another user still cannot update.
Here's how you can find your status:
1. click on the globe to start, and then type the three letters cmd in the search box and press ENTER.2. Enter the following command and press ENTER:NET user "user %%nom.What do you see under "a Local group memberships? -
Command button does not correctly disabled
I use a commandButton control and its partial trigger is defined on a table. The reason is that I need to update the label with the number of lines selected in the table. And if no row is selected, it should be disabled. So to start, I put the 'disabled' attribute to true.
Now I am facing this problem. The button is disabled. But when I pass the mouse over it, I can see it highlighted and apparently activated and I can click on it when the mouse is on it. Otherwise muted. Why it behaves like this?I have tested a 11.1.1.4 to 11.1.6.0 upgrade and see the same question. CommandButton that are disabled seem to be activated when you hover over. By clicking on watch it invalid later and does nothing.
I was able to fix by adding this to my skin
/ * Fix for 11.1.1.6 jdev which shows disabled buttons as enabled when you hover over. */
AF | commandButton:disabled,
AF | commandToolbarButton:disabled
{
background-color: #E5E5E0! important;
background-image: none! important;
border-color: #B9B9B4! important;
color: #737373! important;
}Published by: Don Kleppinger on 24 may 2012 13:35
-
FF to crash immediately in normal mode - ID: 132f75b1-9f3e-46b7-9b43-74e4b2121121. FF, put up-to-date, authorized, administrator mode disabled hardware acceleration, disabled add-ons.
FF opens in Mode safe, but otherwise crashes repeatedly at the opening. FF worked for time, up to half, but today (especially since the update of FF v.17) crashes immediately. As well as repeated ff crashes, Win 7 crashes (less frequently) with a variety of notes for each accident.
(email removed by mod)
Try disabling hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
-
Why does NOT administrator password?
My Macbook Air is NOT requiring a password to get into the administrator account.
When I restart the Mac, it requires a password to enter the administrator and user accounts. I also need a password to the user account to the administrator account. But once I'm in the account administrator and start the screen saver, I don't have a password for the administrator account. In the user account after you start the screen saver, I come on the user account, a password.
You must go to the System Prefs > users & groups
Connection options
and disable the automatic connection, it must be turned off
You need unlock the preferences before being able to do
-
Satellite A110-153: Wlan does not work - disabled WiFi connection
I bought a Toshiba A110-153
· Via a cable to the router (lan) internet working properly.
· But doen't work wireless. A few observations:
· The wireless led burns and is connected.
· In network connections, I got the message wireless network connection disabled. When I choose 'activate', an attempt is made but after a few did minutes no message and still disabled.
· At the start of the pc, I see some wireless networks. After awhile they disappaer.
· some buttons related on wireless are very slow (minutes) to respond.
· I can click on undernet right icon network; It takes minutes before there is a reaction (a popup), but I can't click on it and it doesn't go away when I'm doing other things.
· I don't see an additional icon for a wireless card (is thereonly a?How can I analyze what is the problem / how to solve?
Hello
I agree with snipe. Visit the Intel download page and install the latest version of the driver that there are listed.
http://www.Intel.com/support/wireless/WLAN/pro3945abg/index.htm -
I was working on a project on windows movie maker, and now I don't see what I was doing!
It was working fine but the preview screen does not reproduce the video I created, everything works, but the button play! It is well my clicks, but it does not play what I do?
Mary - Hello and welcome to the forum... I put your two messages together because otherwise you may well end up distorted!
I'm on W7 and think I can use a more recent version of MM - and I don't know if it works on Vista. I am aware that the old version users have experienced difficulties then it may be worth checking the site of MS if a newer version is available for the Vista operating system...
http://Windows.Microsoft.com/en-us/Windows/downloads (look for the Movie-Maker)
Apart from that you might try running the repair tool by going to Control Panel - programs - uninstall a program...
Select Windows Essentials/right click Uninstall and you will get the option to 'fix' - which - it may take a bit of time and when it is finished, restart your pc.
Looks like you have saved your project files - they should be assigned. -Cheers. Ric.
-
Thx for the answers! I want to show my mom this Sunday... I tried to take the exit music and put it in the back and tht does not work either.
Hello
The question you have posted is related to Windows Live movie maker and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:
http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker
-
Ideas:
- Vista
- This problem occurred after avast is flaggeg error last dec 4 2009
- I tried to reset the windows update components, but it did not work.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hi Agnes Vizcarra,.
Thank you for visiting Microsoft Answers.
· Which version of Windows Vista is installed on your computer?
· Remember to make changes recently?
This problem occurs if Windows Update has been disabled by one of the following settings:
· Group Policy
· System policy
· Registry
Method 1
Try to turn on the auto update by following the steps in the link below:
How to configure automatic updates by using Group Policy or of registry settings
http://support.Microsoft.com/kb/328010
Method 2
If you have any security software installed, disable temporarily.
Method 3
Download and install the stand-alone package for the Service Pack 2 from the link below:
Windows Server 2008 Service Pack 2 and Windows Vista Service Pack 2-five language standalone (KB948465)
Method 4
Run a virus scan because it causes sometimes caused by viruses.
Microsoft Security Essential
http://www.Microsoft.com/Security_Essentials/
Link to view:
Learn how to install Windows Vista Service Pack 2
Information about Service Pack 2 for Windows Vista and Windows Server 2008
http://support.Microsoft.com/kb/948465
Hope the helps of information. Please post back and we do know.
Joel S.
Maybe you are looking for
-
NETGEAR wndr3400v2 let more new wireless devices?
I use my router via my comcast cable router (bridged) and it works very well except for some time now, I can not add all the new features for access control? He shows them under authorized devices not connected and I can't have them on the first scre
-
Error converter.exe Sansa Media detailed please help!
OK, here is my not to my problem, I hope it's a detail enough. 1. I choose my copy youtube video 2. click on my anyvideo converter paste my video on the url box 3. click on the stuck 4. click on my profile for avi video. format 5. hang on convert 6.
-
I have an ACER model AX1430G-UW30P, how to turn off mode standby?
This computer is asleep after 10 minutes and the scan aborts and long printing print jobs. I would like to deactivate "standby"
-
BlackBerry widget background-attachment: fixed;?
Does anyone know how to create a fixed background image? Finally, I would like to have fixed a fixed background image with a header div, but I work on one thing at a time... See you soon,. G
-
Dear community BBM, I lost a contact, I don't know whther they blocked me, or as they say the where the delting and re install their application. I'll pay whatever it takes to know the PIN number of the last contact deleted on my list, he suddenly di