I would like to create a site of muse with the same width as my first site

Similar Questions

• I would like to replace my drive 160gig hard with the disk hard 320gig on my laptop running xp.

  I would like to replace my drive 160gig hard with the disk hard 320gig on my laptop running xp. Is it possible to transfer the exact content from one disk to another without having to re - install operating systems and programs etc. ?  I would that all is the same except the size of your hard drive will be increased.

  Is it possible to transfer the exact content from one disk to another without having to re - install operating systems and programs etc. ?

  Yes.

  You use the disk cloning software.  In some cases, a new player may even be bundled with software that will do this for you.

  Unless your laptop has a second drive Bay (most don't), you will also need an external hard drive enclosure.  As a general rule, these connect via the USB port, although if your laptop has a connector FireWire or eSATA you can also use these interfaces.

  You must select your external enclosure based on 3 criteria: the type of connection to the laptop. the physical size of the disc (2 1/2 inches for computer laptop drives); and player interface (determined by the connection of the internal drive of your laptop). For example only (no recommendation), if you wanted an enclosure for a 2.5 IDE drive "which connects using USB 2.0, Newegg has 17 products

  The (slightly) more expensive items among the software, you will need.  For example: http://www.newegg.com/Product/Product.aspx?Item=N82E16817155602 this particular House will work with SATA or IDE drives.

  If you buy an external enclosure that doesn't include cloning software, the software may be available for free from the manufacturer of the new 320 GB drive (e.g., http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list):

  Acronis True Image Home 11
  EASEUS ToDo Backup
  Paragon Drive Copy or Partition Manager Personal

• I want to install a second hard drive in my laptop (mSata SSD), so do I create a system dual boot with the same license Windows on each disc.

  Original title: Dual Boot Laptop

  I want to install a second hard drive in my laptop (mSata SSD), I have two programs to install that "do not receive the", so I can create a system dual boot with the same license Windows on each disc. I can run only one at a time, and it's the same pc/laptop.

  No, you can't, a second facility would be like installing on a second computer, you will need to purchase a second license.

• Site created by adobe map muse with the error. Indexing of images in the form of pages.

  Sorry for my English, I use a translator. My site has only two pages for now, but Adobe Muse sends 14 pages sitemap and Google search Console detects 14 pages.

  
  

  The sitemap created by Adobe Muse indexes the images and pages, see the photos below:

  
  

  

  My Sitemap created by Adobe Muse is the following: http://como-fazer.orgfree.com/sitemap.xml
  
  I appreciate the responses.
  
  

  On the upper right corner of this page, you will find a search box. Enter "muse sitemap images.

• Hello I would like to create a Muse site with homepage and a member area with access code to access the other page of the site is possible this? Thank you

  Hello I would like to create a Muse site with homepage and a member area with access code to access the other page of the site is possible this? Thank you

  No. you're looking completely in the wrong place. These things requires a dynamic system that is appropriate like Wordpress, Joomla and so on. That or a paid Business Catalyst Pro account.

  Mylenium

• Hi, I have Adobe Acrobat Professional. And I would like to create web forms via Adobe for my site. What I have? or is it included in my Acrobat Professional software?

  Hi, I have Adobe Acrobat Professional. And I would like to create web forms via Adobe for my site. What I have? or is it included in my Acrobat Professional software?

  When you say that web forms, do you mean HTML forms or PDF forms? For web forms, Adobe has a number of products, you can use, including FormsCentral and Dreamweaver. For PDF forms, you can create them with Acrobat.

  If you want to create HTML forms with FormsCentral, which calls the web forms, you will need a subscription for the FormsCentral service. The FormsCentral application that comes with 11 Acrobat is used to create local PDF forms, but if you want to create web forms with him you will need a subscription. Note that there is a free subscription, but it is quite limited.

• I would like to create the same mouse over effect which is used on the homepage of Industrial Light

  I would like to create the same mouse over effect which is used on the page home of Industrial Light & magic site. http://ILM.com

  Could you get it someone please let me know what the code or effect which is used. Thank you.

  It seems that there are two shows running in parallel where a mask that follows the mouse has one of them.  The one you see in the mobile mask is on top of the other.

  If you were to search Google for a custom cursor tutorial you'll probably end up by with most of what it takes to get the mask to follow the mouse.

• I would like to create a station that plays a variety

  I would like to create a station myself who plays from the old country, new country, 50s and 60s. I can do it in music Apple?

  There is no way to create a station by selecting several artists. When you first start you must select a type of artist or by genre. However, you can create a station by selecting an artist who best represents a good cut of the type of music you want to listen to. As the songs are played, you can select the star icon and then select "Play more like this" or "play less like this" or "never play in this. Over time your station will be "set" to play music that you really like.

  Also, don't forget that you can create a selection of a few hundreds of songs and perform the same basic function of as an established radio station.

• Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the line: sudo etc. but it works. Any id

  Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the next line: "sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/NameOfYourUSB--applicationpath/Applications/Install\ OS\ El\ Capitan .app X\ X\ - nointeraction", but it says: "command not found" no idea how to do it correctly. I think I'm missing what Installer applications...

  When you have completed the installation of El Capitan, the Setup program deletes itself. So if you have not copied somewhere else, you will have again the download on the App Store.

• I would like to create a reset button

  I would like to create a reset button resetting a counter on my vi. I tried several methods, as seen in the forums, but my only last resets to 0, but as soon as the button is released the number that was displayed when the button has been selected can be seen in the meter box.

  As you can tell I am a very new newbie.

  Any help would be greatly appreciated!

  You're so close.  Wire the output to select your indicator.  Also wire this output to the cable directly above.  Remove the "short circuit".

  The shift register to the left should only go to the Select function.  The result of the Select must go where you put the wire from the registry to offset (the on the right add function).

• Hello guys, I would like to create a product for a website builder. Any help?

  I am a creator of display for oral care products, and I would like to create a product configurator, so that my clients can customize the model they want, and see how the model looks like with a reactive "modeling."

  So basically it should have different options:

  1. Choose the number of brushes they want on the view (1-9)
  2. Choose the model of brushes they want (12 different available)
  3. Choose the 'extra' part they want (small screen lcd, Panel information or refills showcase)
  4. Choose the position they want for each option (eg. 2 brushes (left) + screen lcd (just after the 2 brushes) + 1 brushes (at the end)

  To give you an idea here is a fast modeling that I did:

  

  The real problem I have is that I don't want to have to create all the possible arrangements

  1 and 2 the best way is to have all the variations in a database and query the database for the corresponding products.

  Then have drop-down lists so that a choice can be made

• I would like to create an editable text field in a page?

  I would like to create an editable text field in a page?

  Check out my tutorial here:

  Fields in edge animate - Tutorial #9

• can someone help pls. I would like to create a rectangle with a sharp angle and have no idea how.

  can someone help pls. I would like to create a rectangle with a sharp angle and have no idea how. the brown box, is I want what he's watching.

  Use the direct selection (white arrow) to select the right angle lower (or higher) and drag it where you want it to be.

• I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I

  I would like to stop my paid subscription to Adobe, the creative cloud because adobe does not work on my computer. In addition, it is not possible for me to stop my subscription on the site, because it does not show I have this subscription. That's why I need to helo, please, thanks :-)

  Hi Stephanie,

  Please let us know the problem you are having with your Adobe Creative cloud so that we can fix it for you.

  For cancellation requests, please contact customer service.

  Reference: cancel your creative cloud membership

  Kind regards

  Sheena

• I would like to create a plugin for adobe acrobat 9.0 pro...

  I would like to create a plugin for adobe acrobat 9.0 pro to compare pages, delete the same pages and pages of all brand first compared with new document and mark the second document compared to the original pages. I downloaded the adobe 9.0 SDK, but now I don't know how to continue? Visual Studio can I or can I use another program which is a freeware? What other program do you recommend?  How to open a .api file in order to see the code? I put the SDK software files in a specific location?

  1. you will need Visual Studio. Get your first plug-in compilation can be an event, be sure to use a sample project and work with it, exactly.

  2 API files are the work of other programmers. You can't look inside, and trying to do so is a violation of most software licenses.

  3 API files are installed in the Acrobat plug-ins folder.

  4. you won't find samples or code to copy/paste. You should be an experienced C/C++ programmer, you should be familiar with the basics of the PDF ISO 32000-1 file format, and you should be ready to read thousands of pages of documentation.