I would replace the useragent for a specific site.
I have the preference general.useragent.site_specific_overrides set to true and I general.useragent.override. [Web site] .com to my string of the user agent of your choice. However, this setting has no effect.
However, I am able to get a global replace changing the general.useragent.override preference
Also no luck with the global preference of compensation and leaving only specific site preferences.
Is there something that I am missing? This procedure works on desktop firefox versions.
I upgraded to Aurora 22.02 has and the issue seems to have been resolved.
Tags: Firefox App
Similar Questions
-
How much would it cost to replace the chip for an Iphone 6?
How much would it cost to replace the chip for an Iphone 6?
About the cost of the operations on the wrong device for a new. No one, including Apple will replace any chip in the device.
-
Replace the screen for one with a higher resolution on Satellite P850-12Z
Hi all
I read a lot on the internet about the replacement of the screen on computers laptop toshiba and also I saw a video on [how to replace the screen for a Toshiba Satellite P855 | http://www.youtube.com/watch?v=Ncz3ZaI2I-s].
Is it possible to replace the screen for a Toshiba Satellite P850 12Z (original: 15.6"@1366x768) to another screen with a higher resolution (say: 15.6"@1920x1080 or 15.6"@1600x900)?
I'm sure that the graphics card is able to function perfectly with this screen (nVidia GeForce GT630M 2048 MB dedicated) and also I read a lot on laptop screen replacement, and I know that this screen has a connector 40 pin and it is an LED Panel, so I won't have to worry about the ups.
I found several screens (15.6"@1920x1080) who say they are compatible with Toshiba, but I wan't to make sure a higher resolution Panel replacement is possible.
Thank you in advance.
Hello
Exchange of the display is not supported by Toshiba, so I don't think that someone here can help you with this.
I assume that Toshiba offers multiple views for this model of laptop. Only seller is different but resolution 1366 x 768 is always the same as on the original laptop specification.You can try to contact the nearest Toshiba service provider and ask for help. If someone can help you with that service of Toshiba. They have access to the database of Toshiba and can possibly tell if another view is usable on your machine.
All this is quite complicated.
-
w540 replace the cd for a second hard disk drive?
Hello
I ordered the thinkpad w540 last week. With a dirve normal hard drive and a CD compartment. I figured out after the arrivied to the computer I got a solidsate inside my xps 15 hp.
In the best of cases, I would replace the CD drive, as says the config in the web page in timeline option could be done. How could I know if it is possible to replace the CD player with another hard drive?
Otherwise I would try to replace the original disk for the solid state hard drive, but in this case I loose windows system 8. Is is possible to install again in the new hard drive with the same license?
I was wondering just because it would be nice to keep the drive inside your computer instead of having to plug it in all the time, due to the faster speed, it would be good to use is as the primary dirver.
Thanks in advance,
-Jorge
Hi, Jorge
you will need an adapter "caddy" to house the second HDD/SDD. Ch right here in the forum, see http://forums.lenovo.com/t5/forums/searchpage/tab/message?location=forum-board%3AW_ThinkPads&q=caddy... .
For my W540, I use the caddy of http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=555 and have a very good experience over the years (W510, W520, W540...).
Regarding replace drive HARD original with SSD, there are basically two possibilities - either you use the recovery option (create your own media - see google or trying to get a Lenovo - not sure it will work) or use a transfer software. I have used for years Acronis products, especially because it acknowledges the SSD and aligns everything as it should on SSD (won't go now too deeply in the alignment of industry and to this day).
And if you want to run your W540 on steroids, alias max possilbe storage capacity, see my signature...
-
I have a HP Pavilion Elite m9280f PC, S # [personal information deleted], Windows Vista 64-Bit. I replaced the case for a larger, having connection problems. Lost manual, downloaded manuals, I can not find a diagram of the wires hanging in the motherboard. Help please Tom
Tomahawk, welcome to the forum.
This is the page for Specifications of the motherboard of the computer. You should be able to enlarge the diagram of the motherboard to locate most of the connections. The only place you may have a problem is with the power button connector. Some cases are not compatible with HP moterboards.
Please let us know if this solved your problem or not.
-
A protocol that would provide the service for IPv4 and IPv6 traffic?
- RIPv1
- RIPv2
- RIPng
- BGP
Hi SandeepTandel,
· Your computer is on a domain network?
· What exactly is the question do you face?
Here the following protocols provide for IPv4 and IPv6 traffic or respectively:
Ø Bng supports IPv4 and IPv6 protocols
Ø RIPng supports IPv6
Ø RIPv1 and RIPv2 supports IPv4
Let us know if this information useful.
-
Clone error: warning: could not replace the variables for message ADX RC-50004
Hello
We are cloning 11.5.10.2 Prod environment in the DEV environment.
The structure is as follows:
Node 1: DB + competitor Manager
Node 2: Application Apache (forms and reports)
We run the adcfgclone.pl successfully on the nodes of the db and apache
We received the following error message when it is applied on the concurrent Manager node
ERROR: creation of context not completed successfully
Check the log file and found the following:
Database utility - ADX finished-
WARNING: Could not replace the variables for message ADX RC-50004
StackTrace:
java.lang.NullPointerException
to oracle.apps.ad.tools.configuration.CVMHelper.getDBInitParameters)
Compiled code)
at oracle.apps.ad.tools.configuration.CVMHelper.getDBName (Compiled C
ODE)
at oracle.apps.ad.context.CloneContext.setDatabaseName (Compiled Code
)
at oracle.apps.ad.context.CloneContext.doClone (Compiled Code)
at oracle.apps.ad.context.CloneContext.main (Compiled Code)
Unsuccessful creation of context files
Also, we checked the alert log database (9.2.0.7) and found the following error:
ORA-00600: internal error code, arguments: [ttcgcshnd-1], [0], [], [], [],]
], [], []
We follow action plans in the notes:
Note 726509.1
Note 304037.1
Again, we have the same error and can not clone concurrent Manager node.
Enjoy a quick answer because we are in the middle of the execution of the project.
Thank youSalvation;
Check Please Note: run perl./adcfgclone.pl appsTier ORA-00600: internal error code, arguments: [ttcgcshnd-1] [263298.1 ID]
It may be useful
Respect of
HELIOS -
I would replace the menu bar 'Print' icon-is it possible?
Hi people,
I've been a user of Firefox/fan for several years now, and with my theme dark gray "Print" icon in my tray of the menus just look good. How can I create a substitute and then replace the original?
While I ask... is it possible to create a "Print preview" icon and how/where would I have the link for it?
Thanks in advance... MarkHello
Try this add-on from https://addons.mozilla.org/en-US/firefox/addon/universal-print/ , it uses its own icon with the color that should be better visible then the default dark gray print button.
-
Pavilion 17-f115dx: replacing the screen for this model of computer?
Hi all!
I had the laptop for Christmas and the new year, my sister broke the screen. Since then, I am looking for a replacement of the screen. I'm not sure of the size of the screen is, (in fact, I'm a newbie in all of this). Anyone know where I could go. I've been looking for hours and I finally found this forum. Is the laptop too new for a replacement of the screen? Any info would be great! Thank you very much
Hello
Please use part # to display on the following link:
http://PartSurfer.HP.com/search.aspx?SearchText=J9N59UA
(You can to bookmark the link above for future reference).
You can buy tha above store for $628 (Yes $628)
or use part # buy elsewhere:
Kind regards.
-
Hello
I need to replace the screen on my laptop. I cracked it and two or so inches on the right side are all white with a few colored lines from top to bottom, with the exception of a few places where it is only black.
Can someone tell me what kind of screen, I need? There is a little that I found on Amazon, but I don't know if any screen for a g6 Pavilion would be compatible.
According to assistant decision-making in charge:
Name of the product - HP Pavilion Notebook PC g6
Product number - A6Y41UA #ABA
Thanks in advance!
Hello
Support are in the parts of your laptop:
641663-001 -SPS-PANEL GROSS 15.6 HD BV LED SVA
639516-001 15.6-inch high definition Bright View display panel - AMT/PWT
-
Captivate 5: hide the playback for a specific slide bar
Is it possible to remove the bar reading and its controls to a specific slide to ensure that the user (after reading some information) necessarily must click on a button to go to the next slide?
For example: I built a production in which the quiz questions appear at certain intervals. I don't want the user to skip the question slides and proceed just click on the Play button. I want that they to select an option and click on the Submit button, which then leads to the next slide. So is it possible to hide the PlayBar to these slides only?
John
Hello
You have configured by action 'Enter' to the first Question slide hide PlayBar? So it makes sense that the action you set up 'Leaving' review slide (think you point to the slide of Score here?) is devastated when you re-enter the first slide of the question.
Could you try to hide the bar just before reading the first Question slide, slide "output on" slide just before the first Question? I think it would work, since this slide will not visited again when you return to the first slide of the Question for review. In this case, the action triggered on leaving the Score slide has an effect. Did not try, am a rush, please obtain if it does not work.
Lilybiri
-
Any way to enable the activation of the automatic plugin for a specific site only?
If say I wanted to use "click to start" for Flash (for security reasons), but allow it to automatically run on trusted sites, such as YouTube, is there a way to do this script on a site by site specific Web base?
Options by default, as you know, are 'always', 'click' and 'disabled', which is not enough. I want to have 'always' be under any youtube page, but the 'click' for everywhere else.
And please don't give me the messages on "update your stuff", you lose both your own and my time, we've heard it all before.
Thank you
The list of details of the system indicates that you are running an earlier version of Firefox 23.0 is no longer supported with security updates.
- It is important to update Firefox and Add-ons to the latest versions for all security patches.
Please upgrade to the current version of Firefox 39.0.
- Help > about Firefox
You can control and manage permissions for the domain in the tab currently selected through these steps:
- Click the address bar onthe Site identity button"(globe/lock)
- Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
- Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab
Note that the globe/padlock doorhanger shows the permissions that have been modified by default.
These choices are part of the Site preferences, so make sure that you do not erase these when you remove history.
-
Where can I find guides to replace the backlight for satellite A210 - 1 4?
My display does not illuminate. I need to check a number of things, including the backlight, inverter and door switch. May need to replace the whole LED display.
Does anyone know of instructions to do these things with this particular model: Toshiba Equium A-210/1_C_4
Laptop disassembly is permitted for staff only of Maintenance manuals is not available for download. It is not a public document.
If you want to only use Google and check if you can find instructions written by people who have such experiences or check if you can find a few short film on YouTube.
-
ITunes cannot locate the music for a specific artist
All my music does not appear on my computer and my itunes, except one of my artists. Their albums/songs appear in itunes, but they may not be located on my computer. It is the music of a single artist and two albums. It allows me to play the songs on my ipod, iphone and ipad, but when I try to play music on my computer, it displays an exclamation point and the custom find or play. What should I do?
The exclamation point means that it cannot locate the files in the iTunes Media folder.
Looking for a specific file in Spotlight. Since you know what an artist is missing, search for this artist, album or song using Spotlight. If it's on your computer, projector find. All the music files in iTunes should be in the music folder. Open the Finder, click go > go to folder and paste the following text:
~/Music/iTunes/iTunes Media/Music
Or, if you think it has been moved out of the folder of music, just look in the iTunes Media folder. It could have been placed in the right folder
~/Music/iTunes/iTunes Media
If you have a backup with Time Machine, you can also enter Time Machine and restore the file (assuming that she has been saved before he disappeared).
-
Replacing the battery for Satellite Pro A60
Can anyone advise where the the best/least expensive place is to get a replacement battery for my satellite pro A60, Ive. Ive left permanently plugged causing the batteries to be tired of apparentrly. If I turn the machine on at full load and nothing doing, the battery will expire in 15 minutes. Replacing the battery is cited as A £99, VAT in addition to toshiba - y at - it somewhere cheaper or better size. ?
Any suggestion is appreciated.
Carol
I put t know where is the cheapest place to purchase the battery, but in my opinion, the offers online are the cheapest.
You can see the Toshiba site options and accessories:
HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/JSP/OPTIONSANDACCESSORIESHOME.DO?SERVICE=EU&ID=ONLINE _ SHOPHere, you can select your model of laptop, and you will find the compatible battery.
You didn t write about you model exactly but I think that the battery pack (Li-ion, 12 cells, 6450mAh) with the PA3382U-1BRS part number must be compatible. But check before you buy!In any case, you could Google for that number and I m you will find many offers online.
Maybe you are looking for
-
I can't add a Playlist to my iTunes. There is no sign at the bottom of the left column?
-
Windows Explorer full screen: how to enable by default?
It's about Windows Explorer, not Internet Explorer. I just discovered F11 makes the bar menus and top bar (which is otherwise blue bar called at the top of every program?) disappear. Imagine my joy to see more vertical space available. But... Windo
-
Send a link to a Windows Movie Maker file
I have created a slideshow with windows movie maker and you want to make available on the internet. Can I create a link to this file and if so, how?
-
Are there any drivers out there that I can download to be able to connect my printer which is a Lexmark X 4690 to my laptop which has windows 8? Tried to go to lexmark.com and not help.
-
How can I get rid of this problem so I can print pdf documents?