IBM Thinkpad R52 R52Thinkpad n - how do I know if it is SATA or IDE

Similar Questions

• IBM Thinkpad R52 beep but will not charge what could be the problem?

  The machine will beep 3 times then 1 hour then 4 and finally 3 times.  does not load windows xp

  Hello

  The feedback Forum is for feedback on the Forums for answers.

  You should ask in the answers – Windows Forums for your version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  =====================

  Sound beeps are error codes that describe a problem with your machine.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - usually F2 that you start - look to see BIOS
  Creator, then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It can be so other check with the manufacturer of the system.

  I hope this helps.

• How can I connect a monitor to my IBM ThinkPad

  How can I connect my IBM ThinkPad laptop to my TV?

  Hi, Joe Butch,

  How to connect IBM's ThinkPad laptop to TV

  http://www.ehow.com/how_6508798_connect-IBM-ThinkPad-laptop-television.html

  Steps for IBM's Thinkpad laptop computer connection to the TV with S-video cable

  http://swiki.fromdev.com/2008/08/steps-for-connecting-IBM-ThinkPad.html#! /2008/08/steps-for-connecting-IBM-ThinkPad.html

  There are videos on the topic as well.

  http://www.Bing.com/Videos/search?q=How+to+Connect+ThinkPad+to+Television&qpvt=How+to+Connect+ThinkPad+to+Television&Form=VDRE#.

• IBM Thinkpad with XP Home Edition preinstalled but no XP installation CD. Will need to re - install XP from CD after planned hard drive upgrade. How can I create a CD to install XP from the installed system?

  Hi, I bought an IBM Thinkpad with XP Home Edition pre-loaded in 2005 (the XP key sticker is on the bottom of the laptop), but did not receive an XP installation CD - I understand, it is a common practice. I want to improve the internal hard drive (for a bigger) then you will need to re - install XP from CD. They tell me that there is a way to create the XP (on the CD burner) installation installation CD but have no idea how. I can't imagine I'm the only person to have had this problem. Can you tell me where I can find the instructions how to do this please? Any help is welcome. Thank you very much.

  There are many cloning utilities, but I recommend Acronis True Image. You can clone your hard drive, then use TI to the image of your system and to make incremental backups. MS - MVP - Elephant Boy computers - don't panic!

• How to replace the Ethernet adapter internal of an IBM ThinkPad T60p

  Several IBM ThinkPad T60p. unfortunately I have a ThinkPad shows in the BIOS "(internal network) MAC address: 00 00 00 00 00 00' and sometimes ' 02 00 00 00 00 00". The Green LED next to the Ethernet connector is also dark if this laptop is powered (adapter attached) and a network cable is connected. That's why no Wake on LAN is possible. To my surprise, the network card works under Windows and there is also a MAC address. Wake on LAN is also possible in Windows.

  Because all the BIOS settings and also the BIOS version are exactly the same on all the other ThinkPads IBM T60p I think there is a problem with my internal Ethernet card.

  Anyone know if it is possible to replace this internal Ethernet card? I ask because I also have an IBM ThinkPad T60p, which is broken and that's why I intend to Exchange Ethernet adapters internal if possible.

  I think that they are integrated on the MB, so it's not possible

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• I tried ubont in my pc but windows xp pro, I have the product key, but not the cd has lost can you help me to reinstall on IBM thinkpad

  Ihad tried to install ubount on my thinkpad IBM, in doing so, I lost all my windows xp pro cannot start this back, I have my key but not a dic # how to reinstall it back on my IBM thinkpad T23 thanks

  Did you install Ubuntu?

  If so, you will need to get a drive OEM from a friend and use your key.  Make sure that it is a key OEM and OEM disk during installation.

• What age can be a laptop IBM Thinkpad X 30?

  Hello

  Know someone how old can be for laptop IBM Thinkpad X 30 Type 2673 NG1?

  THX

  X 30 was built in early 2003 memory.

• IBM ThinkPad T43: Rescue and Recovery question

  Hello

  I have an IBM ThinkPad T43. The Rescue and Recovery program opens whenever I turn on my laptop after a failed attempt to restore my laptop to factory settings. I cannot even connect on Windows, because the Rescue and Recovery program opens upwards immediately after I turned on the power. I tried to restore my system to factory settings using the program and the product recovery disc I bought at Lenovo, in the hope of resolving the issue, but every time I'm prompt "IBM could not restore your system.

  How can I stop Rescue and Recovery of the opening and resume with normal startup in Windows? What should I do so that I am able to restore my laptop to factory settings?

  Please help if you have any suggestions. I appreciate it greatly! Thank you!

  You can use this TI pc doc disk bootable http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-56222 its been a long time since I used it, but I think that in the top right there is a tab that says utilities or something like that you can wipe the HARD drive from there as I've always used the quick option worked for me

• IBM Thinkpad 1024 x 768 TFT LCD screen

  I have an IBM Thinkpad A30 2652-44U - works fine - but it offers me only the default monitor - how to access the LCD TFT screen - if I go into view......... Advanced settings monitor... the LCD is listed but not highlighted... just the monitor by default... my graphics card is the ATI Radeon Mobility - not sure in addition... If I knew that I could possibly be upgraded drivers - are there drivers for the monitor? If so, where a download them - thank you very much for all the help

  Welcome to the forum!

  Try this one, closely following the instructions on the download page:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-44320

  Good luck

• IBM Thinkpad Z60t help

  Well, I reinstalled windows xp pro sp 2 on my grandfather's old ibm thinkpad models Z60t, because he gave it to me and I didn't need half of the stuff on the hard drive. So I reinstalled xp and I do not have driver disks or backup discs. I went on the Lenovo site and tried to download the drivers on my desktop and transfer them to my laptop. I reinstalled the wireless driver but it is not working properly. It won't let me connect to the internet. In addition, it doesn't let me put the computer on standby.

  Help, please.

  Install update of the system from here:

  http://support.Lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-66956

  Who should find most if not all of the drivers that you miss.

  Then proceed to the dial-up connections to:

  http://support.Lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-4ZLNJB

  Good luck.

• IBM Thinkpad T30 RAM Flaw

  IBM Thinkpad T30

  Type: 2366

  Manufactor Date: July 2003

  OS: Windows XP Pro SP3

  Processor: Intel Pentium 4 1.9 Ghz

  RAM: 512 MB

  HARD drive: Hitachi DK23FA-60

  Graphics card: ATi Mobility 7500 w/16 MB RAM Radeom

  I realize it's a very old laptop but it still works to this day and I use it every day.

  I've been a bit online and I found that there is a design with the motherboard fault. More precisely the location of the hard drive and RAM above the other causes a lot of heat build-up to this place. IBM (now Lenovo) offered a repair or replacement of the laptop for a few years I know. My question is Lenovo continues to do this or not? I got this laptop a month ago and a half, so I have not long. Unfortunately I have no money to even pay for the repair and even less to ship for repair. Is there something I can look at?

  Welcome to the forum!

  It's been years since the replacement program of the Board of Directors on T30 units had ended.

  Your best bet is to install a single 1 GB DIMM in the 'healthy' location and use the machine like this if one of the RAM slots failed.

  Good luck.

• IBM ThinkPad T42 would not connect to my home network secure wireless

  Configuration IP of Windows __An internal error has occurred: a device attached to the system is not functioning. __Please contact support services technical microsoft for more help.

  Others have had a similar problem, but I tried the solutions that have worked for them, without success.

  All of a sudden, my IBM ThinkPad T42 wouldn't connect to my home network (WPA2-PSK) secure wireless.  It would be either (1) stay in a constant state of "acquiring network address" or (2) do not recognize networks wireless in the range.  Sometimes, it would connect to a nearby unsecured network, but the network would still not appear in the list of available wireless networks.  So I tried to connect directly to the ethernet, which also did not work.  I then ran the ipconfig/all command at the command prompt and got the message:

  Windows IP configuration
  An internal error has occurred: a device attached to the system is not functioning.
  Contact support services technical microsoft for more help.
  Additional information: unknown media status code.

  So, I went to Microsoft Product Support Services, which does not seem to offer all the solutions.  I searched this error online and found several similar problems - some users had problems with viruses.  Some users had winsock2 corruption, and some recommended to reinstall the drivers for my network cards.  I'm computer literate, but not a computer Wizard, so I was able to follow their instructions for checking the winsock2 corruption (I think), and I think it's very good.  I did a complete scan of symantec, but who came with nothing.  I downloaded the drivers for my network cards which are: Wireless - 11 a/b/g Wireless LAN Mini PCI Adapter, ethernet - connection of a Mobile Intel (r) PRO/1000 MT and was able to update my wireless driver, but not the driver ethernet.  The latter Assistant said we "could not find a better match for your hardware than the software currently installed".  I had wireless internet to work for a few hours last night, even if I still have the same error message when I run ipconfig/all.  I started my computer this morning, and the same problem again - constantly says "address of network acquisition" even if no wireless networks are appearing on the list.  Also, I tried the system restore to see if I could go back before the problem started, but after that I tried several dates, System Restore has still not successful - it wouldn't work again.

  So now, I have my computer in safe mode, and it is connected to the wireless internet, even if the ipconfig/all command still gives the same message, and I am running symantec again to see if I can find something!

  Please help me!  If you think that I may have missed something with the winsock2 or installing drivers, or if there is something I could not find on the internet, please let me know!  I'll try anything.

  Note: I have Windows XP Professional Service Pack 3.
  Network card drivers, I'm running are:
  Wireless: Date - 02/05/2007, Version 4.1.2.156, provider - Atheros
  Ethernet: Date - 24/10/2006, Version 8.7.9.0, provider - Intel

  Thank you!

  Update: when I disable the Intel PRO/1000 MT driver, I can run ipconfig/all with success.  Then imagine it's something to do with this adapter or the driver.  Any ideas?

  OK, so here is what I did to solve this problem.

  I've updated to the latest version of the IBM BIOS

  Then get the WLAN driver from the manufacturer, NOT IBM, NOT Windows Update. Depending on your card, it will be Cisco or Intel.

  I can not stress enough that updates to IBM and Windows update does not work and I lost a lot of time. However, once downloaded directly from the manufacturer (new version) worked flawlessly!

• Laptop to TV screen? ThinkPad R52

  Hi I was wondering if theres anyway to connect my laptop to a TV to display whatevers on the laptop?

  I have a thinkpad R52 model.

  Hello mate,

  In the left part of the R52, you have a S-video output next to the usb ports. It will provide the picture but no sound. You must connect the audio jack with a cable to the TV to get the sound.

  Once everything is connected use Presentation Director for activate the S-video port.

• Why the recent updates to Windows are close my IBM ThinkPad without warning? Help, please!

  Since I installed the latest Windows updates on my IBM ThinkPad (belongs to the office, one for me), the computers have decided to stop randomly without warning and without closing programs.  It happened first in the portable desktop computer and I tried a system restore, but it wouldn't.  Today, I installed on my computer but after I did a system restore.  I'll try that, but I guess that this will not help.  What can I do to get this to stop happening?   Is anyway to switch to Microsoft and tell them what is happening and have them repaired?

  OK, removing the updates does not solve my problem, so reinstalled. I solved the breaks down by turning the bottom of my screen Hardware Acceleration 1 notch. Always try to understand the underlying cause.