Icon mail frozen. IPad rebooted, but it has not solved the problem

Similar Questions

• I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried re-installing 12 items three times in case there was something missing, but this has not solved the problem and save the enemy

  I installed Adobe elements 12 update to 6 items.  I need to use the save for Web function, but it is grayed.  I tried to reinstall 12 items three times where it was missing something, but this has not solved the problem and enemy Save Web feature is always gray on. How can I get this feature too much work. I contacted the home and they have happened to you. I have 20 minutes to make a customers web work and if I don't work (about £500). Please advise/help.

  You are on the Expert tab in the editor?

• How can I install / find drivers for travel Pro BT for W7 Starter Plantronics headset? Have run FIX IT routine for the DEVICES, but this has not solved the problem

  Broadcom BT radio detects the Plantronics headset, adds the device, and then advises that pilots cannot be found.

  I've updated the MS Bluetooth Module software, run it DIFFICULTY for equipment and devices, removed the Plantronics and added again to the BT devices, but still get the same error message.

  From Plantronics Web site advises that the necessary drivers must be provided by the site of the BONE, that is to say of W7.

  I confirmed that the BT Radio is working normally.

  TIA

  Peter K

  Hi PeterKvietinskas,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can follow the steps mentioned in the link below

  My computer does not recognize my Bluetooth device.

  (Article applies to Windows Vista, not valid for Windows 7)

  Method 2: Download and install all available Windows Update

  Install Windows Update

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You might want to know

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN

• When I launch Firefox, I get only the bottom of my browser in the Firefox window. I have already reinstalled it, but it does not solve the problem.

  When I launch Firefox, I get only the bottom of my browser in the Firefox window. I have the normal window for 1 second, but it changes in the background window only. So, without the toolbar or navigation. I have already reinstalled it, but it does not solve the problem.

  Hello jonson00, please follow the troubleshooting steps in Firefox opens with a white or transparent window. If this solves the problem, it would be also interesting including the extension has a problem in your case. Thank you!

• I receive I/O-ERROR in bridge CC when I try to access the outputmodule. I have instaled the wersion more recent module, but it does not solve the problem. What should do?

  I receive I/O-ERROR in bridge CC when I try to access the outputmodule. I have instaled the wersion more recent module, but it does not solve the problem. What should do?

  reset your preferences: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

• I put my yahoo homepage, but every time I open mozilla home page is webssearches I reset firefox, but it does not solve the problem, what to do now?

  My homepage is set to yahoo, but mozilla opens with http://istart.webssearches.com as start page. Same reset does not solve the problem. I think that I have installed a software that installed this. My default search engine is Google. Kindly help me, is there something to do in all: config?

  See this tutorial - http://malwaretips.com/blogs/istart-webssearches-com-removal/

• The drop down menu boxes that appear under the heading of Firefox do not fill. A form of box on the screen, but it is empty. Given zero no has not solved the problem.

  The file, editing, display and help tabs that were on the previous version of FireFox Menu bar top are apparently incorporated into the "FireFox" drop-down box in the latest version of the browser. I was unable to open those tabs earlier, so by the recommendation of the Support Forum, I have Firefox on my laptop. Now not only the tabs above are missing after this reset, but the drop down menu does not open in any submenus. What I see now is a box on the surrounded black screen, but sub menu selections such as save as, print, copy etc are not shown in the box. This is why the Navigator is not functional in its current state.
  Does anyone have a fix for this problem that will not delete my favorites and other content stored on Firefox? Please save me to return to Internet Explorer.
  AJJC

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Can not install windows update to KB2656362 get the error code 880070490. Run fix, but it has not fixed the problem.

  Can not fix with fixit.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/Windows-Update-error-80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need repair Windows. Repair Windows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error. You can access and run this tool by reading this Knowledge Base article on the Microsoft Web site.

  If the system update readiness tool solves the problem, you will need repair Windows.

  Of course a repair installation will not solve the problem if it is due to an infection of virus/malware etc.

• I started the disk defragment the task, but it has not completed the process. He just continues to run.

  I started the disk defragment the task, but it has not completed the process. He just continues to run. I let it run for days and nothing don't past he never stops running. What should I do to get this to accomplish the task?

  Hello

  Take a look at my responses to a message here...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/defrag-has-been-running-for-5-hoursshould-it-take/3f45c33e-08f3-4885-86a7-b5bbfe152dab

  Concerning

  GT4U

• Has anyone solved the problem of "search field" of Muse? MuseThemes not an answer.

  Muse has solved the problems of field "search"? MuseThemes is a false solution. They want a $79 one tax yr for a widget that requires more complicated HTML coding and their instructions are horribly bit intuitive.

  You can try Google search in your site:

  e http://StackOverflow.com/questions/13822927/How-can-i-Add-a-Google-Search-Box-to-My-websit

  https://CSE.Google.com/CSE/tools/create_onthefly

  Thank you

  Sanjit

• Y40 - 80 randomly turn off. The battery calibration has not fixed the problem of battery meter.

  Hello

  I've had this Y40-80 during about 9 months and it has recently been acting strangely. The laptop will stop randomly. I thought that it was a sign, I had to calibrate the battery but after I had calibrated the battery, the battery meter percentage remained at 100% for a good 2 hours until it starts to decrease.

  Now, I tried to recalibrate the battery for 5 times using the howtogeek, OneKey and the discharge of the BIOS. I did a fresh install of Windows to get rid of all the software Lenovo that might have caused the problem, but that did nothing.

  I also uninstalled the Windows ACPI and Lenovo ACPI, which does not solve everything.

  This issue makes the computer laptop underclock the processor environ.48 Ghz, which makes the computer almost unusable.

  Someone have an idea on how to solve this problem, or is the battery dead?

  Comment to Moderator: Bumping more frequently than 3 days unjustly pushes down the discussions of other members. Bumping message (s) deleted.

  In response to customer relationships of unexpected behavior portable Y40 - 70 and Y40-80 meter battery, Lenovo has determined that the battery meter software is working as expected. The unusual calibre results being reported are the reflection of the battery reaches the end of life.

  Lenovo has launched a CUTTING-EDGE Service to help customers get the battery replacement under warranty, or if more warranty, find a spare from suppliers approved by Lenovo battery. The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-I0023

  The numbers for Y40-70/80 batteries are:

  Y40 SP / A L13M4P01 7.4V48Wh 4cell IBE (Y40-70/Y40-80) 121500248

  Y40 LG L13L4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500249 replace the 121500251 part

  Y40 CP/C L13C4P01 7.4V48Wh IBE 4cell (Y40-70/Y40-80) 121500259 replaced by 121500251 of the part

  To determine what battery supplied with your computer laptop Y40, instructions to remove the lower cover can be found in the manual of Maintenance of equipment pdf here. An alternative to opening your system (which do not cancel warranty) is to find batteries using the product/model number located on the bottom cover.

  Thank you

• BSOD: "a process or thread crucial to system operation has unexpectedly released or ended." Startup Repair does not solve the problem-

  I recently had a serious viral infection on my laptop Windows Vista SP2 Gateway.  After you run the antivirus AVG cleaner, who seemed to have had to quarantine or delete some files infected, System I couldn't Boot Windows to the top on this machine - even in the (all flavors of) Safe Mode.  When you try to start, I'd get

  a Blue Screen of Death with the msg of error in the title of this thread.  Before turning off the crash dump, the system indicated:

  ' * STOP: 0X000000F4 (0 X 00000003 0X85F22848 0X85F22694 0X82A26AB0).

  Other messages in the BSOD said I might have new HW causing the BSOD (I did not - but nevertheless I removed all external HW and tried again - got the same result).

  So one of the first things I did was to capture the startup log, so I could see what the pilots were hang up / does not.  Here's what I found:

  (1) the last driver to load (as indicated in ntbtlog.txt) was monitor.sys.  My understanding is that this indicates that when this driver loaded, the system crashed at this place - suggesting that there is 'something wrong' with this particular driver.  However, it seems likely, that I can use the screen/monitor (built-in) to the laptop without problem.

  (2) several drivers do NOT load: they are:

  1 NDProxy.sys

  2 Kvhfjgcv.sys

  3 Kbdhid.sys

  4 i8042prt.sys

  QUESTION 1: "Monitor.sys" being the last driver to load, should I assume this is the driver the system hung up on (that is, which caused the BSOD)?  And if so, that means I should replace this driver?  If so, how do I do that (how and where can I get a copy of 'Clean/good' of monitor.sys)?

  QUESTION 2: Is it possible to get "good versions" of drivers I listed above which was NOT loaded (I guess they didn't not load because they have been corrupted by the virus or the virus cleaner, or maybe just deleted by the virus cleaner because they were infected) to put into the Windows\System32\Drivers folder?  How?

  Here are the steps I took to try to fix the "corrupt system".  I inserted my Windows Vista DVD into the DVD drive and loaded Windows using that.

  Once that came, I then tried the following (and here are the results for all that I tried):

  (1) I selected the option "Repair", then choose "Microsoft Windows Vista" OS and press "next".  He tried to 'attempt to repair' for 15 minutes about, then finally stopped with a message: "Startup Repair cannot repair this computer automatically.  "Details of problem indicated: (a) the problem event name: StartupRepairV2." Signature 01: ExternalMedia; Signature 02: 6.0.6000.16386.6.0.6001.18000; Signed 03:6; Signature 04:131074. Signature 05: 0xF4; Signature 06: 0xF4; Signature 07:0; Signature 08:2; Signature 09: WrpRepair; Signature 10:5; OS version: 6.0.60090.2.0.0.256.1

  (2) I selected the option 'display diagnostic and repair details '.  He said that all tests successful (error code = 0 x 0), and

  then indicated the 'cause': ' unknown error checking: bugcheck f4, parameters = 0x3, 0x88607b80, 0x88607ccc, 0x82a78ab0. "

  - AND -

  Repair action: repair and checking the integrity of system files.  Result: failed.  Error code = 0 x 5

  (3) I checked that the restoration of the system, and even though I know I had some Restore Points created at the origin of this system, System Restore has indicated that there was no restore points to go back, (leading me to believe that the virus must have killed)

  (4) so I chose the selection "Command Prompt", which opens by default "X:\Sources >".  I'm in C: and then typed: "sfc/scannow".  The system has responded with the following messages:

  "Start system analysis.  This process will take time. " follow up 30 seconds later by the message:

  "Windows resource protection could not perform the requested operation".

  MAIN QUESTION: any reflection on what other tools and options I try to repair the windows installation / driver set?

  Hello

  I suggest you follow the steps below:

  Method 1:

  Follow the steps in the link and check if the problem persists:

  http://support.Microsoft.com/kb/958233

  Method 2:

  Connect over winre and rename the driver files that he talked with *.old quick order. You can find these % system32%. Follow these steps:

  a. use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).

  b. in WinRE, open a command prompt. To do this, follow these steps:

  On the screen to install Windows, select the appropriate language to install, time and

  currency format and keyboard or input method options and then click Next.

  c. click on repair your computer.

  d. click 7 installation you want to repair, and then click Next.

  e. click on command prompt.

  f. navigate to % system32% and rename old files 8.

  Method 3:

  After step above the computer restarts. Run the System File Checker tool to troubleshoot missing or corrupted system files. Follow the steps from the link:

  http://support.Microsoft.com/kb/929833

• Unable connect to GMAIL because "the browser not to accept cookies. I deleted the cache and cookies, but does not solve the problem.

  My problem is with IE - 8 on Vista 64-bit.

  Following the instructions to "bypass" of Microsoft for the Microsoft Security Advisory (2757760).

  I changed a number of privacy and security settings block access by the attack vehicle.  To restart the computer, Google doesn't let me sign into my Gmail account because my browser does not accept cookies.

  I tried recommendation Google next to allow cookies, then the empty browser history and delete cookies.  Always without success.
  I have reset the IE setting privacy and advanced security "by default".  Always without success.
  I just downloaded the hotfix from Microsoft security for the same problem, but Gmail still insists on the fact that my browser is NOT enabled to accept cookies.  All cookies related pick boxes are enabled.
  This is as far as I know.

  My problem is with IE - 8 on Vista 64-bit.

  Following the instructions to "bypass" of Microsoft for the Microsoft Security Advisory (2757760).

  I changed a number of privacy and security settings block access by the attack vehicle.  To restart the computer, Google doesn't let me sign into my Gmail account because my browser does not accept cookies.

   

  I tried recommendation Google next to allow cookies, then the empty browser history and delete cookies.  Always without success.

   

  I have reset the IE setting privacy and advanced security "by default".  Always without success.

  I just downloaded the hotfix from Microsoft security for the same problem, but Gmail still insists on the fact that my browser is NOT enabled to accept cookies.  All cookies related pick boxes are enabled.

  This is as far as I know.

  Use Firefox or Google Chrome.  ;-)
  (Seriously - you will have a better experience for the most part.)

  Reset Internet Explorer 8 settings:

• Opening Outlook Express - goes directly to the Inbox, but it has not annotated the headers of messages

  All of a sudden when I open Oulook Express it goes directly to the Inbox, however, there is no annotated the headers of the message.  The Inbox goes to an open email (last seen) and I have to scroll between open emails to read.  There is no front paget that lists topics, sender As Object, etc...  I tried to change views, options and all the things in tools, reviews, tabs etc. top of the screen but cannot get this first page abbreviated to come.  Anyone who could help me with that it would be greatly appreciated.

  Do you have you uncheck the preview in the view pane. Page layout?

  Outlook Express issues should be posted here.

  XP - Networking, Mail, and getting online Forum
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/threads

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA