icon text format
I use the text of the line 1, 2, 3, etc. in the icon editor. I can't change the format of the text. Where can I change it?
This is because you have cleartype active and that you use a cleartype font. You should only use the "small font".
See also the following discussion: the words in the icon editor Get Fuzzy
Tags: NI Software
Similar Questions
-
I had trouble with Thunderbird, I so re-installed. (Version 38.2.0) I use TB for years, usually with no problems. But this time, after re - install, when I "answer" text of the sender is in plain ASCII text format, regardless of the settings. And plain text is bright blue!
I want to preserve the HTML format (usual) of e-mail of the sender when I answer. My settings specify the HTML format.
I don't want to use TB with this "disability" - help! Thank you!
I don't see where you checked the compositions and the addressing of adjustment to your account. For all accounts also.
-
Text formatting will not work on 7.23
Hello.
It has been recently updated (about two weeks ago) that completely broke text formatting for me.
None of the options work for me.
They would look like this under my messages:
* bold *.
_italics_
~ bar ~
{code} and I don't even know what to call this code from {}
None of them appear correctly, yet other people I chat with that do not have this problem.
What happened, and is there a way to fix this?
Under "Tools" - "Options" - 'IM and SMS' - "Appearance IM", make sure that 'Show advanced text formatting' are checked.
-
Tecra M5-400 after uprade to Visa - icons, text are not correctly displayed
Dear users,
Just upgraded my Tecra M5-400 in Visa Ulimate. The problem now is that the icons, text, etc. are not displayed correctly (big, dull). Tried drivers from Toshiba, but none of them is specific for my model, and some of them do not install.
Any ideas what I should do or what driver I need to download?
Thank you!Hello
Your device should have nVIDIA Quadro NVS 110 M graphics card. Google around and try to find the Vista driver for the graphics card.
-
How can I save data in text format
How can I save data in text format in labwindows cvi
Hello
If your data is in a table, the easiest is to use the ArrayToFile function.
Automatically, it creates a file and puts your data in it depending on the size you provide.
If you have individual samples you need to write from time to time, you can either collect them in a table and then use ArrayToFile or open a file with fopen and write them as they are acquired with fwrite.
Hope this helps,
-
How to generate a report in text format
How to build a report in text format and send it to both a file and a printer?
Hi Chuck,
Yes, it seems that the printed report and save the report to the VI file seen in the link above from smercurio_fc is going to do what you need.
Also, here is an example of our community that can be useful to print to the printer by default by using report generation,.
I hope this helps!
-
Desktop icon text boxes are blue highlighted
original title: the desktop icon text box
The text under my desktop icons are highlighted in a blue rectangle. How do I get the highlighted blue and rectangle to disappear? It was clear a few days ago.
Do a net search for "icons transparent Alan Edwards" and you will always find the answer for this quickly. Here is the answer to the problem:
1. Control Panel-System-Advanced-Performance settings.
Check "Shadows fall to use the desktop icon labels" on the display
Effects tab.2 - Click on Desktop - "arrange icons by" and ensure the lock Web
items is disabled.3. transparency will not work if you have the web content on your desktop.
Control panel - display properties Desktop tab - customize the Office-
Web tab, clear all the check boxes.4. ensure that the wallpaper is an image file no HTML.
John
-
on my desktop, the icon, (text under the icon) are highlighted, is anyway to have just the text under the icon? Thank you
This is probably caused by your background color of your screen. You can confirm this by:
If you have a Web page on your screen, then you will need set the color manually by:
(1) right click on your desktop and select "Properties".
(2) this should bring up your "Display properties" dialog box (You can also get it by going to your control panel and double-clicking on 'Display'.)
3) click on the tab "Office".
(4) on the bottom right of the dialog box, there is a 'Color' option and below which shows the colors of the office - this must match what you see on the screen.
(5) simply change the color to whatever color you want and then click on the 'OK' button to close the "display properties".If you do not have any web content on your desktop, you can set the transparent icon labels by:
(1) right-click on 'My Computer' then click 'properties '.
2) click on the "Advanced" tab
(3) in the 'Performance' section, click on the button "settings".
(4) make sure that "shadows fall to use the desktop icon labels" is checked
5) click on the 'OK' button to get out of the "Performance Options".
"6) click on the 'OK' button to get out of" System Properties "
(7) right click on desktop
(8) mouse on "arrange icons by".
(9) be sure that "Lock Web items on desktop" is unchecked. (If it is, just click once.) -
Desktop icon text color on the top
I would like to change my Desktop Icon TEXT black or other color so I can READ the TEXT under the icon. Wallpaper is a picture that I took has a very pale blue sky almost white. You don't see the text under the icon because the text is white, even when I put my cursor on the desktop icon. I have Vista Ultimate.
Hello, Jeff WTR755,.
Thank you for posting. What you're trying to do is possible, all in Classic skin Mode. You can do so by following the steps I have provided below. Please pay attention to the " " " to change the colors on your computer if you have no Windows Aero"section.
Please let me know if this helps you.Change the colors on your computer
You can change the color of your window frames, the start menu and the taskbar.
Click to open personalization.
Click on window color and appearance.
Under the window color and appearance, click the color you want, and then click OK.
Note
If you see the dialog box appearance instead of the window color and appearance settings, the theme might not be set to Windows Vista, the color scheme might not be set to Windows Aero, or the computer might not meet the minimum hardware requirements for running Windows Aero. For more information, see solving problems with Windows Aero.
To change the colors on your computer if you don't have Windows AeroIf you have determined that you do not have Windows Aero, you can still change some colors on your computer.
Click to open appearance settings.
Click Advanced.
In the item list, click the part of Windows that you want to change the color.
In the color list, click the color you want.
Repeat steps 3 and 4 for each component of Windows which you want to change the color, and then click OK.
Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
Windows Vista Basic - display, icon & text animated look and does not fit screen
original title: Windows Vista Basic
After a recent update of my screen, icons, text and little else seems animated and does not have the screen on my laptop. Advice please? I tried to change my screen resolution, but it will only go all the way to the left or all the way to the right.
Hello
There are a number of things to try:
try going to your graphic card manufacturers site or computer and are looking for the driver download section
Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista
then try to make the screen of solution of problems
http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution
Change the screen resolution
__________________________________________________________
or try a restore of the system before this happened
http://www.windowsvistauserguide.com/system_restore.htm
If necessary do in safe mode
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
________________________________________________________
and change how to get updates for you to choose what you install to stop it happening again
You may need to install one at a time to find the problem, we
Make sure that you do not use Windows Update to install the drivers of 3rd material part
Find them directly in the hardware manufacturer
and when you see the problem update right click on it - UAC prompt - then hide it
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.
Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.
-
Text formatting on SegmentedControl and inside the drop-down list
Hello
I'm trying to change the color of the text on the buttons of a SegmentedControl and part of a drop-down list.
I don't want to change the skin, but only the text. With the drop down menu, I managed to change the upper part (just what you see when the drop down menu is closed) using
myDropDown.button.setTextFormatForState(myUpColor, SkinStates.UP);
etc, but with the elements inside the list and buttons SegmentedControl I can't find a property that lets me set the text format...
Any ideas?
It doesn't seem to be an easy way to do.
The only way would be to extend the SegmentedControl and then override the following method with the following code. It should do the trick. We will work on making that it puts far more easily in the future.
override protected function onButtonAdded(child : RadioButton) : void { var dpLength : int = __dataProvider.length; child.width = Math.round( width / dpLength ); // change this to be percentages child.groupname = __groupName; //Set your formats to whatever you like here. child.setTextFormatForState( ThemeGlobals.getTextFormat( ThemeGlobals.SEGMENTED_CONTROL_FORMAT_DISABLED ), SkinStates.DISABLED ); child.setTextFormatForState( ThemeGlobals.getTextFormat( ThemeGlobals.SEGMENTED_CONTROL_FORMAT_OUT ), SkinStates.UP ); child.setTextFormatForState( ThemeGlobals.getTextFormat( ThemeGlobals.SEGMENTED_CONTROL_FORMAT_DOWN ), SkinStates.DOWN ); child.setTextFormatForState( ThemeGlobals.getTextFormat( ThemeGlobals.SEGMENTED_CONTROL_FORMAT_SELECTED ), SkinStates.SELECTED ); child.setTextFormatForState( ThemeGlobals.getTextFormat( ThemeGlobals.SEGMENTED_CONTROL_FORMAT_SELECTED_DISABLED ), SkinStates.DISABLED_SELECTED ); child.drawNow(); // set the button text formats here }
-
Mr President.
I have a button with the icon text. Is it possible to increase the space between the text and icon?
Concerning
Have you tried it as directed by the other thread?
See you soon
AJ
-
@when iam trying to display text that is formatted as clob. He loses the formatting... This is the code that iam using to display
IAM using Express application 5.0.0.00.31
DECLARE
v_chunk_size NUMBER: = 2000; joelkallman-Oracle
CURSOR l_cur IS
SELECT EB_TEXT
EBOOKS
WHERE EB_SLNO =: P7_SLNO
AND dbms_lob.getlength (EB_TEXT) > 0;
BEGIN
FOR l_rec in l_cur LOOP
BECAUSE me in 1... ceil (dbms_lob.getlength (l_rec. EB_TEXT) / v_chunk_size)
LOOP
HTP. PRN (substr (l_rec. EB_TEXT, ((i-1) * v_chunk_size) + 1, v_chunk_size));
END LOOP;
END LOOP;
END;
How can I display the text without losing text format?
Taharka Krishna wrote:
Lose the paragraph formatting.
This is because the HTML specification normally requires all the extra white space characters are collapsed and treated as a single space. However, preformatted text can be displayed using the
pre
element, in which whitespace is rendered as:DECLARE v_chunk_size NUMBER:=2000; CURSOR l_cur IS SELECT EB_TEXT FROM EBOOKS WHERE EB_SLNO= :P7_SLNO AND dbms_lob.getlength(EB_TEXT)>0; BEGIN htp.p('
'); FOR l_rec in l_cur LOOP FOR i IN 1 .. ceil(dbms_lob.getlength(l_rec.EB_TEXT)/v_chunk_size) LOOP htp.PRN(substr(l_rec.EB_TEXT,((i-1)*v_chunk_size)+1, v_chunk_size)); END LOOP; END LOOP; htp.p('/
'); END;
-
How to show the white space of the text formatted?
Hello
I use Jdev 11.1.1.6.0 with ADF Faces.
I have a requirement to show a text report page in recorded format. The report in text format is saved as a text report several records with each line containing the maximum 78 characters.
Each drive is formatted with a space to display the data in the column. For example:
SUMMARY
-------
Col1 Col2 Col3
xyz1234 abc9999 mno1234
...
The report data appears currently unformatted. It removes the white space and shows just with a few default spaces. Something like:
SUMMARY
-------
Col1 Col2 Col3
xyz1234 abc9999 mno1234
...
Thus, you cannot read the data with the appropriate column header. If you query the table in SQL Developer, it shows with perfect formatting. Also our legacy Oracle Forms application to display with the correct format.
Currently, I tried following, but it does not work:
< af:outputText value = "#{row.rptText}" id = 'ot1' "
inlineStyle = "do-family:"Courier New";" font-size: 12.0pt; »
noWrap = "false" / >
I tried this on af:column too, especially noWrap = 'false', but so far without success.
Any help is appreciated.
Thank you
JAI
If you can use a converter custom jsf (validation and conversion of entry) to change in the query using "pre" helped the (text with pre sourrounf) when the data is rendered. The converter must implement two methods. Then you can try to use ' ' as a space of unbreakeable instead of simple spaces.
Timo
-
is it possible to import text formatted in a document word or pages?
Hey,.
I need to import a text, which is about 13 pages. Is it possible to import the text with all the formatting?
Every time I'll import text, formatting is gone.
Best regards
Tristan
If you can convert your documents into PDF files, you can watch in the Muse themes widget to display PDF files within a web page itself.
http://www.Muse-themes.com/products/PDF-Viewer
Charlie
Maybe you are looking for
-
Time Capsule used a driver of cloud?
Time Capsule used a driver of cloud?
-
Lexicographical image processing
I want to treat an image Board lexicographically (sense of reading what you write, so from left to right). Normal arithmatic (division, multiplication etcetera) functions increasing the table in its entirety, but I want to push the upper-left pixel t
-
SSD upgrade/migrate inside 23 tilt of HP Envy TouchSmart?
(model: 23-k001hk all-in-One) Hello all - asking for suggestions advice from wise and kind people on the best way - and operating instructions - for upgrading the speed of my current hdisk 1 TB + SSD 16 GB cache scheme of HP storage by one of these i
-
power surge on hub port... tried every thing but it want reset!
power surge on hub port... tried everything, but it will not be reset!
-
GPS latitude and longitude are not when no signal
Hello I am buliding a BB 9700 GPS application. I am able to get the latitude and longitude through cellTower (using the Service Provider signal), but I am unable to get the latitude and longitude when there is no signal. I tried the criteria to false