Desktop icon text boxes are blue highlighted

Similar Questions

• Desktop icon text color on the top

  I would like to change my Desktop Icon TEXT black or other color so I can READ the TEXT under the icon. Wallpaper is a picture that I took has a very pale blue sky almost white. You don't see the text under the icon because the text is white, even when I put my cursor on the desktop icon.  I have Vista Ultimate.

  Hello, Jeff WTR755,.

  Thank you for posting.   What you're trying to do is possible, all in Classic skin Mode.  You can do so by following the steps I have provided below.  Please pay attention to the " " " to change the colors on your computer if you have no Windows Aero"section.
  
  Please let me know if this helps you.

  Change the colors on your computer

  1. You can change the color of your window frames, the start menu and the taskbar.

  2. Click to open personalization.

  3. Click on window color and appearance.

  4. Under the window color and appearance, click the color you want, and then click OK.

  Note

  • If you see the dialog box appearance instead of the window color and appearance settings, the theme might not be set to Windows Vista, the color scheme might not be set to Windows Aero, or the computer might not meet the minimum hardware requirements for running Windows Aero. For more information, see solving problems with Windows Aero.

  To change the colors on your computer if you don't have Windows Aero

  1. If you have determined that you do not have Windows Aero, you can still change some colors on your computer.

  2. Click to open appearance settings.

  3. Click Advanced.

  4. In the item list, click the part of Windows that you want to change the color.

  5. In the color list, click the color you want.

  6. Repeat steps 3 and 4 for each component of Windows which you want to change the color, and then click OK.

  Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• objects (lines) and text boxes are not able to make larger or smaller

  first: for no reason at all, all my text boxes are now implemented in the text block.  I don't know how that lit.  When I go to 'type '.

  and try to choose "threaded text" it won't allow me to select - it is not highlighted.  So I have no idea

  How to disable this option.  Now, I can't stretch my text boxes depending on what is in them - IE: make bigger or smaller, that is to say: there's only two boxes hanging out - one on each side of the text box and they allow me to drag to enlarge the box - only to move the whole box (before there were 4 boxes to manipulate the size of the text box - a on every corner - now, there only two) and this seems to apply

  in many other objects now.  When I draw a line, I have to make sure that the line is the exact right size because once I have draw - it will not allow me to make it larger or smaller - it only allows me to move it to a different location - I don't understand what's going on

  View > see the bounding box

• the desktop icons and labels are not transparent

  the desktop icons and labels are not transparent

  Hello

  · Were there any changes made on the computer before the show?

  You can check out the post below which deals on the same concern: http://answers.microsoft.com/en-us/windows/forum/windows_xp-files/desktop-icon-issue/5c5826c3-8a73-4265-bbf5-5a840fccf9af

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Hi, how to do text jumps automatically down to the next text box when the text box area runs?

  Hello

  I tried to figure out how to get the type u to text in a text box automatically jump down to that underneath the text box area runs. I have some specific lines that I wish ppl in my PDF enter their information on. But I can't seem to manage get text, as executions of box of text box, to jump to the next line.

  That should be done with JavaScript in AcroForms. AcroForms don't have such a device built in. Dynamic form fields can be created by LiveCycle Designer, but it is an additional cost.

• He won't let me spend just about anything with my cursor on my mac, none of the images or text boxes are locked!

  He won't let me spend just about anything with my cursor on my mac, none of the images or text boxes are locked!

  Ok.

  Try a reboot and if it does not, see replace your preferences

• Text boxes are not displayed when published

  When I publish my Captivate using the htm option, many of the text boxes are not displayed. They are all transparent style with the Arial font. A display and others are not. I compared those who appear with those who do not and do notice no difference at all. When I preview the slide it works, but after the release of a film text boxes are not displayed. I can't find all the resources for this problem. Please help if possible... Thank you.
  

  Work around: change a text box in your file.
  Make one change - as balance text - and click 'apply to all '. "and click OK.
  Then go to the change of the menu drop down and select "Cancel".
  This will not solve the problem.

• The desktop icons and taskbar are at least three minutes to load when I start the computer.

  Original title: problem with the desktop icons

  All of a sudden when I start my computer, the icons on the desktop and icons at the bottom of the clock of the take at least three minutes to load, and before that time, they used to load in a few seconds.  Also, I have no problem with the computer start.  Any help to solve this problem will be greatly appreciated.

  According to the specifications of your system, hard drives on your system are disks IDE (not the SATA drives).

  Sometimes the Interface IDE mode can change from DMA mode to PIO mode and when that happens, things sudden. run very slowly, but it is easy to check and adjust if you need to.

  Here's how:

  If you are using IDE drives, use Device Manager to check the channel Transfer Mode IDE is set to something like DMA if available (depends on your hardware) and the slow PIO mode.
    
  Don't forget: PIO is the slowest, DMA is faster.

  It is easy to check and usually easy to fix and the mode would not have changed in itself, so if she changed to PIO, change it to DMA, and then understand why it changed and fix it.

  To launch the Device Manager console, click Start, run and enter in the box:

  %SystemRoot%\System32\devmgmt.msc

  Click OK.

  Expand the section controller IDE / ATA to see your IDE channels. Each right click and choose Properties for each channel that has a tab advanced settings, determine the Transfer Mode. There are usually 4 channels to check in a desktop computer, maybe less for laptops.

  Faster selection will always be a kind of selection DMA (usually: DMA DMA5, UDMA, etc.).  If it is PIO, change it to DMA.
    
  If you are unsure of what you see after return of help and advice.
    
  If you make settings, restart and check the settings again to make sure that any change stick.
    
  What may have caused the change?
    
  http://support.Microsoft.com/kb/817472

• desktop icons covered by a blue screen with the white question mark

  original title; Desktop icons

  My desktop icons have a blue circle with a white question mark hide them.  How can I get rid of them?

  My desktop icons have a blue circle with a white question mark hide them.

  These are icons by programs such as Norton 360 backup and are used to indicate certain conditions such as the status of the backup. You must go into the program generating overlays and disable this setting. In the case of Norton that would be settings in the main window and then uncheck the backup status overlays.

• Duplicate text boxes are created when you use edit in the browser

  I recently launched a site to a client which is hosted by a 3rd party host. We used in the edition browser to update his page "dishes of the day. For the most part, it went well, but twice after the changes have been made, it seems that there is a text box double sitting directly on top of the other. (see below) This happens on the mobile site as well as the desktop version.

  

  When I merge the changes into the file of Muse, it's not an extra box here. Usually, I'm able to fix it easily through Muse, but the idea was that the customer would be able to manage the daily updates on their own.

  Also, when I merge the files in Muse, he asked to merge the changes that nobody does (for example - deleting a space in the navigation bar). The customer insists on the fact that they don't touch these areas.

  Can anyone offer ideas why this is happening and what we can do to prevent it?

  Thank you!

  We found the problem and are working on the release of a patch in our next version of patch.

  The problem is after the first edition, the 2nd time that a user tries to modify the same block of text THAT BIE incorrectly analyzes the file due to some space elimination that's happened since the first publication. This problem does not seem to be widespread at this time, because it seems to depend on a having a block of text next sibling.

• Text boxes are connected?

  I spread at least a part of the text boxes on the page seem to be connected to form any. If I type something in a text box, the other TextBox moves downwards. They are not grouped.
  It's terrible, if my client does in the Assembly browser - then everything is misaligned.

  Can you help me?

  Thank you!

  What you can do to solve the problem, it is to increase the size of your text box, pull it completely to the bottom of your image slideshow, as long as the text flow beyond the below text box will not move.

  

• Acrobat 11 - text boxes are truncated

  Windows XP, Acrobat 11 (Hebrew)

  I saved a number of documents Word 2007/2010 in PDF format and then grouped into a single PDF. The original Word documents contained several text boxes. Although individual Word documents that have been saved in PDF format are very good, and the combined document looks very good as well, sometimes errors occurred.

  I printed the document to my internal printer and everything was fine. I used WeTransfer transfer the file to a Publisher.

  (a) when it has printed, some of the many boxes was missing a part of the text. It referred the case. I fixed the text boxes and sent it using WeTransfer. At that time, another text box was missing a text. In addition,

  (b) occasionally, in a text box, the? at the end of a line printed at the beginning of the line instead.

  Does anyone know if there is a bug or other reason that this happens?

  Thank you

  You create this PDF file in Word using the PDFMaker add-in under the Acrobat Ribbon?

  I think that the problem you are having is associated with the original font is not integrated - that fits into this last screenshot. You do not have the embedded Times NewRoman (italic) police and it's one that is endangered.

• Text boxes are available in iPhoto 9.6.1?

  I have not yet upgraded to El Capitan.  I'm saving up for a new MacBook Pro.  I did a last yer picture book, but could not fins out how to insert text boxes.  I want to make a family history book so you will have to put a text with images.

  Most themes book photo Photos allow to use text boxes.

  You do not separately add text boxes, you simply choose the page layout a layout with text boxes.

  A page where you want to add a text field, and then click the layout button and select a layout with a text field:

  

• Desktop icons and program are corrupt and all link to Skype.

  Original title: Desktop icons

  My desktop icons and program have been corrupted and all link to Skype. Someone at - it solutions?

  Here is another possible solution:

  Restore the .exe file association:
  http://www.Winhelponline.com/articles/165/1/restore-the-exe-file-association-in-Windows-Vista-after-incorrectly-associating-it-with-another-application.html

  Excerpt:
   
  Download exefix_cu.reg attached at the end of this article and save it on the desktop. Right click on the REG file and chooseMerge.

  Scroll down to the spare section and click on exefix_cu.reg and follow the above instructions. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.