Idea about the creation of the registration with blank fields

Similar Questions

• Prevent the signing with blank fields

  Hi all

  Ive tried many solutions to this problem in the last two days. My question is:

  1. I have an adobe form that contains more than 400 fields, radio buttons etc... all are assigned to required as the form should be filled out completely. i.e. "N/A" placed in text boxes and selected among the choice of radio button for fields that do no apply. It is extremely important to ensure that the form is completed correctly.

  2. before the signing, all fields are in check as filled in. (I'm using a button and hide the field signature for this currently)

  3. after the signing of all the fields must be locked for read-only and cannot be changed.

  4. the report must be just completed and returned by e-mail rather than the option 'submit form', which makes the option useless required field, the form will not be verified prior to submission. Therefore, I am trying to implement the audit before signing to take place.

  I tried javascript and a button of signature that hides the signature field until a statement on each individually named text box and radio button checked that none have been left blank, but with more than 400 areas and multiple forms for it to perform on this is an arduous and time-consuming task I want to avoid as much as possible.

  is there a faster solution for, e.g. check all text? (Note: unique names for each - a task that took an age in itself)

  got my answer.

  this.getField("Document_Sign").hidden = true
  var emptyFields = [];

  for (var i = 0; i)

  var f = this.getField (this.getNthFieldName (i));

  If (f.type! = "button" & f.required & f.display == display.visible ") {}

  If ((f.type=="text" && f.value== "") |) ((f.type=="checkbox"_||_f.type=="radiobutton"_f.type=="radiobutton") & f.value == "Off"))

  emptyFields.push (f.name);

  }

  }

  If {(emptyFields.length>0)}

  App.Alert ("error! ("You must fill in all required fields: \n");

  }
  else {This.getField("document signed"). Hidden = false}

• Anyone has idea about the table "BIN$ IdkH3La7RVy0VEiT + 5ag == $0.

  Hi all
  
  Anyone has idea about the table "BIN$ IdkH3La7RVy0VEiT + 5ag == $0 ' in Oracle 11 g.
  
  When I ran a query such as "Select * tab '.» I found a table called ' BIN$ IdkH3La7RVy0VEiT + 5ag == $0. When I select the data in this table, I found the data. And these data are the same as the data in the other table in the same schema. And what is the concept on this table.
  
  and on the last thing is I tried to remove data from the table ' BIN$ IdkH3La7RVy0VEiT + 5ag == $0 "but the data is still there in this table, even though I am committed it.".

  Well, these are the tables that you have removed from your database.

  This feature is presented in 10g. When you delete a table, he goes to the basket just as any file goes into windows.

  If you use-->

  purge recyclebin

  It will delete the entire table at all times.

  If you want to retrieve any table of the Recycle Bin, then you can use->

  fall of flashback table emp tobefore

  Please see this link->

  http://www.Oracle.com/technology/pub/articles/10gdba/week5_10gdba.html

  Kind regards.

  LOULOU.

• Dynamically, use page number in the form on the pages with their field?

  I have a form with pages having engineered.  JS for spawning exception works very well.  However, a text field on model is driving me crazy.  I wish that this field ("CaseNum") to dynamically display the page number, given that the page number also matches the file number.  On templage ("getcase"), I can calculate the value for CaseNum using custom script calc (event.value = this. PageNum).  But it does not work because each page having spawned Gets the same value (that is to say, what is the latest issue of the page generated). I also tried the JS below, using P0.getcase.CaseNum as the field on the model in which I wish the page number/box number to display:

  var this.pageNum = opaque;

  this.getField ('P' + opaque + ".getcase" + ".") CaseNum') .value = opaque;

  But it does not either, because the page automatically generated field gets the prefix of the P + .getcase page number appended to the name of the field.  Is it possible to number of dynamic page used in a form on the pages with their field?  If so, how? Note that while I try to use a dynamic file on pages with their number, it presents the same problem as dynamically displaying pages with their page numbers.  I'm a JS newbie, so any help appreciated.  I searched high and low on the web and in the forums and couldn't find the answer.  THX.

  http://forums.Adobe.com/thread/1160899

  @

  7George Johnson,.

  

  February 28, 2013 09:42 in reply to natelfo

  Is that what you mean?

  See also:

  http://www.PlanetPDF.com/developer/article.asp?contentid=6466

  d-template-pages-using-JavaScript-functions/ http://www.wordwizardsinc.com/blog/Finding-the-FieldName-prefix-on-Acrobat-acroform-spawne

• How can I make the popup with empty fields and create new record?

  I would use a popup create new record.
  I created an af:popup drag and drop a data control VO in jsff. Then, I created a button and place an af:showPopupBehavior. I was able to pop-up window by clicking on the button.
  However, the window filled with information from the record 1. and when I select a record in the table and click on the popup, the popup is filled with this record.
  How can I make the popup with empty fields and create a new record by recording the popup?
  Thank you

  Hello

  You must call the CreateInsert for the underlying ViewObject operation when opening the popup because it does not allow to clear the input field, you must have a new record created

  Frank

• Get information about the layer with script styles

  Is there a way for a script to get information about the currently existing on a layer layer styles?

  For example, can I know if a layer has a drop shadow, and that therefore, find the dimensions of this shadow, transparency, color, etc...?

  If you don't have CS4 you will need Xbytor script. With CS4, you can the the layer descriptor

  var ref = new ActionReference();
  ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  var desc = executeActionGet(ref).getObjectValue(stringIDToTypeID('layerEffects'));
  if( desc.hasKey( stringIDToTypeID('dropShadow') ) ){
       desc = desc.getObjectValue(stringIDToTypeID('dropShadow'));
       alert('opacity = '+ desc.getDouble( stringIDToTypeID('opacity') ) );
       alert('distance = '+ desc.getDouble( stringIDToTypeID('distance') ) );
       alert('spread = '+ desc.getDouble( stringIDToTypeID('chokeMatte') ) );// spread
       alert('blur = '+ desc.getDouble( stringIDToTypeID('blur') ) );
       var desc = desc.getObjectValue(stringIDToTypeID('color'));
       var r = desc.getDouble( stringIDToTypeID('red') ) ;
       var g = desc.getDouble( stringIDToTypeID('green') ) ;
       var b = desc.getDouble( stringIDToTypeID('blue') ) ;
       alert( 'r = ' + r +'\rg = ' + g + '\rb = ' + b );
  }
  

• Problem with the registration with EPOS2 24/5 data and LabVIEW

  Dear community memebers,

  I tried a few examples from the library of the EPOS and I would like to know how this sample works and works to save the data.

  

  Idon't ' tknowwhatdoestheparameters, thatthereareindecircle, means.

  I would like to draw the Position, speed and acceleration. Somebody can explain to me how it works? and what is the function of the numbers in the cluster?

  Thank you.

  Best regards

  Xavi

  Hi Xavi,

  You should ask Maxon to explain their software. Or read the manuals they offer...

  Motors with a logic generally use a communication scheme registry. You write to register to set parameters, you read some registers for current parameters/values of the engine. Each cluster in this array describes one of these registers/parameters, such as the first with registry address x 6064, x 0 and d4 value. These settings seem to resemble specifications CANopen CiA!

  I can't open this VI because it's the version of LabVIEW, but probably you will find labels on the control of entry of this Subvi. Read the labels...

• Yet another question about the update with the shutters tab

  I am quite new to this, but I've been scouring the boards and try many different things, and I decided to ask for advice.

  There are other threads similar to my problem such as:

  http://supportforums.BlackBerry.com/T5/Java-development/SetFocus-issue-with-tabbed-screen-page/m-p/6...

  http://supportforums.BlackBerry.com/T5/Java-development/how-to-delete-a-Manager-or-a-field-that-is-c...

  I have a set up tabbed pane based on the example and everything works fine until I have delete a line from a VerticalFieldManager. It is by default the focus on the first item on the screen, and I get this. My problem is trying to substitute or replacement behavior.

  My screen implements the FocusChangeListener for the buttons on the tab (custom LabelFields).

  I tried many different variations - I tried to manage the update completely manual and ended with a bit of a mess. I tried to capture the event navigationUnclick() and coding of the focusChanged() method to manually switch the update, but it seems that the focusChanged() method is called before the focusChanged(), which doesn't help me.

  As I said I am pretty new to this so I could do something very stupid, but I don't really understand the focus handling implementation. A kick in the right direction would be appreciated.

  Thank you.

  You can have a NullField in your managers before all other areas - in this way, even if you delete the rest, the NullField might keep the focus.

  If this does not help, try the substitution of sublayout for your managers, call super.sublayout and then explicitly setFocus to your NullField (the deletion of any field causes a display Manager to rearrange).

• Question about the SUM of numeric fields

  Hey all,.

  I hope I posted this in the appropriate forum (this could probably go in the forum of the JS as well and if so, please excuse me.)

  My question:

  I have a mileage monthly log with a field where the user enters the odometer of the vehicle beginning reading (this is a MANDATORY FIELD) at the beginning of the month, OR when the vehicle is used first.

  I have then 31 fields below corresponding to the days in a month with each field containing the odometer of END of reading for that day. If the vehicle has not been used for a particular day, the day field would be empty. At the bottom would be a field "total miles". For example, the data must be like this:

  Beginning mileage: 111 111

  1st 111 200

  2nd 111 300

  3rd

  4 112 000

  5 112 300

  6th

  7 113 000

  ...

  ...

  ...

  31 114 100

  MILEAGE TOTAL 2 989

  'Total mileage' = 'Start mileage' LESS ' reading of the odometer of the 31st day AKA the LAST ENTRY for MONTHS.

  That is my question. How can I make the "mileage" field be dynamic? Say that the vehicle was used from the 5th through the 10th, how can I have the "mileage" field display the odometer reading?

  If all goes well, I explained this well enough for someone to help me and any help will be greatly appreciated.

  Hello

  It is an example where FormCalc has an advantage over JavaScript. There are built in functions in FormCalc for maximum and minimum values.

  In the total mileage, you could set up two variables, one for Max and the other for minutes and then subtract.

  var maxMiles = Max(mileage[*])
  var minMiles = Min(mileage[*])
  
  $ = maxMiles - minMiles
  

  This is based on the script to calculate the total field event. It depends also how you have configured the table. If the lines have the same name: for example Row1 [0], Row1 [1], Row1 [2],... Row1 [30] and the mileage field is named the same in each line, then the script may look like:

  var maxMiles = Max(Row1[*].mileage[*])
  

  Hope that helps,

  Niall

  Ensure the dynamics

• Do not update the values after the registration of form fields

  OK, so I'm building a character auto fill timesheet system using shape. Everything works as expected until I save, close and reload the document.

  I will try to explain the movement of what is supposed to happen, and then it ends by happens.

  Field B is equal to a particular value, depending on what is entered in the field a. field C is equal to the field b. field G totals fields c.-f..

  If I re - write this from scratch, it works as expected, even if I change the to field a different value (thereby changing all other fields to reflect the new data).

  Once I save the document, close and reopen, here's what happens.

  Field B is equal to a particular value, depending on what is entered in the field a. field C is equal to what was the B field before I closed the document. Field total field c.-f. G.

  Can I change A field change and field B to the value it is supposed to. However, field C will not change. Field G still totals the values as expected, including the c. field-stuck now

  Indeed, whatever it is equal to the B field after backup and reload remains at its value prior to the closing. I have a lot of fields equal to B but B alone gets its value based on the field A. I used both "value is the sum of:"and custom JavaScript, both which gives exactly the same results. "

  I use Acrobat Pro (trial) on Windows 7 x 64.

  In format PDF is the order in which the fields are calculated is not automatic, but can be set. If field C depends on the B field and field B is dependent on the land then must ensure that the order of calculation is A-B-C, or the values in calculated fields will be a step behind the value of a field when you update it.

  You can set this command in form editing mode, under the order of computation of Set field - other tasks.

• Hi I am trying to install a video game, but I get an error and I am new with Windows 7 Starter since 24/11/09 (I use to be with Windows XP so have no idea about the new thing in Win 7)

  The error I get is this bellow.
  
  

  1. Installation Information

  Error writing to the file: C:\Program Files\FireStarter Gaming\Dekaron Rusaki\data\data.pak.   Make sure you have access to this directory.

  OK, so what I don't understand is part here.
  Make sure you have access to this directory.

  Why don't I have access to My/that Directory if I'm the administrator / owner of my laptop?  If I can not then who can? Microsoft... ?

  Thank you
     
  Steven Jr

  @Steven jr,
  You are able to install other applications?  Verify that you can install other software (you can install a component of Windows Live Essentials from here).  If you can install other software, then contact the manufacturer of the support software.  They may have to update the installer to load correctly on Windows 7.

  @tomsei72,.
  Looks like your video driver needs to be updated since it was created before the release of Windows 7. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Creation of the OSB with WLST field

  Hello
  
  I am trying to create a domain using WLST script for version 10.0 on redhat 5.0.
  The WLST script invoked by the ANT, creates a simple field of OSB, with only adminserver, with workshop and bus applications service.
  
  I understand JMS Reporting provide needs table in the schema for logging and this application is also created in the field, when I create the field.
  
  Assuming that the schema for the reporting application is not created yet, when I try to start weblogic domain, he complains about file "weblogic_eval$ 1.wal" in the root directory, I know that this file is created if I create a domain by using the configuration wizard and run scripts of creation of OSB scheme during the domain design process , instead I think that he should complain connection due to schema error is not available?
  
  My Questions:
  
  1. What is the best way to create a schema for the application in question, during field automated build process that we need to create new areas of the script and be able to start and deploy applications on it. which will also require to have the db for the application schema.
  
  2. what happens if I create a db schema oracle report or any other database other separately then pointbase so how to avoid the error file ' weblogic_eval$ 1.wal ' to complain? What practice is in place or recommended for my situation necessary?
  
  Thanks in advance!
  
  SAL

  My fault. http://download.Oracle.com/docs/CD/E13222_01/WLS/docs90/config_scripting/domains.html#1001249--je mistaken or I don't know how to operate in offline mode.

  Another suggestion is to use templates to create domains (that I tried on my local machine now) and can be easily automated.

  (1) model of domain created (http://download.oracle.com/docs/cd/E13222_01/wls/docs90/config_scripting/reference.html#1029279, http://download.oracle.com/docs/cd/E13222_01/wls/docs90/config_scripting/reference.html#1203320)

  (2) change of the /config/config.xml in the container of the template to remove (Reporting of JMS provider, Message Reporting trap) and other changes

  (3) used the jar model modified to create new areas.

  Maury

  Published by: mneelapu on October 23, 2009 15:45

• Satellite M70-168 - no idea about the BIOS password

  Hello

  I have a problem with my Satellite M70-168 is PSM70E-01300PFR. When it starts to have a black screen a blue ask password window. The problem is that I have no idea on this password.

  Can you help me please?

  Concerning

  Hi mate,

  If you have forgotten this password, it must be removed from an authorized service, but you can't do anything in this case. You need professional help to remove it!

  In addition, this should be an interesting article for you:
  http://APS2.toshiba-tro.de/KB0/FAQ35002I000IR01.htm

• Concerns about the workouts with the Apple Watch - request for comments and Suggestions

  I'm a professional skill that has recently upgraded from a Polar to the Apple Watch.  I am delighted to stop wearing the chest strap of the Polar, but even though I love my new watch, I wish for some improvements in the future.  Training categories are too vague.  When you set up a 'training' on my Apple Watch, which is the step class, I was ANOTHER selection to OPEN.  Others who do?  What others recommend?  And I'm trying to decide whether to use Active or Total calories during the recording of my activities in my Fitbit dashboard.  One last thing, I find it odd to be worked hard and look down to see my heart rate displayed as 60, when I know that it takes more than 130.  I would like to hear from other fitness in mind of people about my problems.  Thank you.

  Hello

  When a workout is started, choose the type of activity that best fits the nature of your exercise activity. For any activity other than the named options, select the other (for example, your step class).

  The types of activities in the application of the workout on Apple Watch help the watch to determine what sensors / data sources to use in follow-up and evaluate the results of your activity. For example:

  -To run in the open air, the watch can use the heart rate sensor, accelerometer integrated and GPS of the iPhone paired (if it is available during the race).

  -For inside running (on a treadmill), the watch will be based on the accelerometer to estimate the distance and pace (as GPS data are not relevant).

  -Indoor activities, the watch will be based mainly on the frequency heart readings to estimate of burning calories.

  The other category is therefore useful (from point of view of the watch) by advising that certain types of activities are not undertaken.

  During the follow-up of one exercise using the others, your watch will estimate active calories based on one that is the higher of:

  -L'equivalent of a brisk walk (calories saved on this basis can vary per person, based on their personal information), or;

  -The data recorded by the heart rate sensor.

  When you use the other, activity app will also credit the ring of progress of exercise with one minute for every minute of the workout.

  If you want Apple to consider adding specific types of additional activities for the purpose of the workout, you can suggest that here:

  https://www.Apple.com/feedback/watch.html

  All submissions are read (even if you do not expect to receive a response).

  More information:

  Use of the workout on your Apple Watch - Apple Support

• Satellite C660-21Z - System Message about the error with cooling system

  I've had my laptop for 11 months now, and in the last days a system message was appearing on my screen saying there is a problem with the cooling system and that I should turn off the laptop and return it for service. I'm not sure if it a message genuine system or if it is in fact spam.

  The answers would be grateful to you

  Hello

  I have read on this message and looks like it s a software bug
  Have you noticed any problems with the cooling system? I mean something like a higher temperature or unexpected shutdown from the bottom?
  If not then it's a bad alarm
  You can ignore this message and I read that after new system recovery the message did not appear again.