identify the appleworks files

Similar Questions

• Y at - it an app that can access the Appleworks files?

  I have a lot of old Appleworks files that I can be more open because they are not supported.  I had to keep an old iMac that is still just able to endure the old Appleworks both latest software, but it is causing more and more problems to each new upgrade.  To copy and save in a ' doc or "docx is always possible, but there are too many for my time availability.  Does anyone know of an app that would always allow me to access that info?

  Try libreoffice.

  (141397)

• How to identify the source file and edit reports in Oracle Sales R12.1.3

  We use R12.1.3 with Database 11g.

  I would like to know - how to change the report.

  --------------------------------------------------------------------

  For example if I want to edit a report in the module INVENTORY existing any report.

  • After the name of the report identify the concurrent program
  • The program contributing to identify the name of the executable file
  • In the executable file name identify the
    • Method of execution: Oracle report
    • Running file: name of the source file for the report
    • Take backup and edit the report and replace the report in the TOP >

  But in the sales module (it is not form based Oracle - I think it is developed on OAF)

  I would like to know how to identify and modify the report.

  According to standard - module sales Oracle provides three report and according to our Advisor to use these three reports, we need to install BI

  So we must find the solution through internal developments

  Hello

  Set the option to profile ' FND: Diagnostics ' to 'Yes' at the level of the user and you will be able to get 'on this Page' link at the bottom of the page.

  Kind regards

  Zahid

• Problem to identify the control file when creating physical standby

  Hello
  
  (database version: 10.2.0.4)
  linux platform)
  
  I use the command below to create physical database from a backup before:
  

  rman target / auxiliary sys/tiger@paceview
  
  Recovery Manager: Release 10.2.0.4.0 - Production on Tue Sep 4 18:05:53 2012
  
  Copyright (c) 1982, 2007, Oracle.  All rights reserved.
  
  connected to target database: PACEVIEW (DBID=2092349485)
  connected to auxiliary database: PACEVIEW (not mounted)
  
   run {
   allocate auxiliary channel c1 device type DISK;
   set until sequence 38;
   duplicate target database for standby dorecover nofilenamecheck;
   }
  
  
  released channel: ORA_DISK_1
  allocated channel: c1
  channel c1: sid=35 devtype=DISK
  
  allocated channel: c2
  channel c2: sid=36 devtype=DISK
  
  executing command: SET until clause
  
  Starting Duplicate Db at 04-SEP-12
  
  contents of Memory Script:
  {
     set until scn  138180211934;
     restore clone standby controlfile;
     sql clone 'alter database mount standby database';
  }
  executing Memory Script
  
  executing command: SET until clause
  
  Starting restore at 04-SEP-12
  
  channel c1: restoring control file
  ORA-19625: error identifying file /backup/rman/paceview/DEL1_standby.ctl
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  ORA-19600: input file is control file  (/backup/rman/paceview/DEL1_standby.ctl)
  ORA-19601: output file is control file  (/PGHProdDB/oradata/paceview/control1.ctl)
  failover to previous backup
  
  released channel: c1
  released channel: c2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 09/04/2012 18:01:44
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06024: no backup or copy of the control file found to restore

  I already tried to cross but always give same error
  Thank you

  Hello;

  That's what I'd do:

  Primary backup (change in your directory as needed)

  RMAN RUN {
  allocate channel d1 type disk;
  backup format '/u01/backups/PRIMARY/df_t%t_s%s_p%p' database;
  sql 'alter system archive log current';
  backup format '/u01/backups/PRIMARY/al_t%t_s%s_p%p' archivelog all;
  backup current controlfile for standby format '/u01/backups/PRIMARY/sb_t%t_s%s_p%p';
  release channel d1;
  }
  

  Move the backup and duplicate like this:

  rman target sys/password@PRIMARY auxiliary /
  
  RMAN> run {
  allocate channel C1 device type disk;
  allocate auxiliary channel C2 device type disk;
  duplicate target database for standby nofilenamecheck;
  }
  

  For details of this method, see:

  http://www.Visi.com/~mseberg/duprman2.html

  Best regards

  mseberg

• What are the unnecessary files and is at - it issues removing them?

  I need to free up some space because I ran. But I'm afraid if I delete some unnecessary files, it will have an impact on my PC.

  What type of files 'undesirables '?

  Please be more explicit. In general, Yes, because they are "undesirable".

  You can clean everything in the folder % TEMP except files currently locked. Is better to clean temp folder immediately after restarting Windows.

  What do you mean that you have run out of free space. A tool like CCleaner will identify the "junk" files that can be deleted.

• First will not quote the source files, it is trying to locate

  Hi, when I opened a project first wants me to identify the source files but it fails to tell me that he's looking for! Anyone know why?

  Looks like you're on Mac El Capitan (10,11, x), is - that correct? If Yes, some dialogs changed with 10.11 Mac and affected dialog boxes are more display the title bar, which is where this information is displayed (this affects a number of applications, not just the first one). Is a question that is being investigated because he was not a problem on Mac OS 10.10.x.

  FWIW, in the latest versions of CC, the feature has been added to the Media link dialog box, which displays the path information in the dialog box. I know that it is not for you, since you are using CS6, but FYI if you plan to update.

• How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2),

  How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate?  I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive.  To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.

  How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files.  In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system.  Would be grateful for any help you can provide, tonight if possible.   Best regards, Oliver for Norm

  Hello

  See this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

• The driver INF file: identify the OS Architecture of the driver inf file supported

  I'm trying to analyze the drivers INF file to identify the architecture of operating system supported by them. For this, I am referring to the MSDN ' SECTION MANUFACTURER INF ' link:

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff547454 (v = vs. 85) .aspx

  I have an inf driver that includes a section of manufacturer as:

  [Manufacturer]

  HSD % = HSD, NTAMD64

  According to section manufacturer documentation given in the link above, the model INF Section name must be decorated with architecture support and therefore, "NTAMD64" suggests that the driver is valid for a Windows 64-bit operating system. But, which suggests "HSD" ?

  What operating system doesn't make it references to? How to identify with this? It only supports 32-bit OS or 32 and 64 bit OS.

  Hello

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums:
  http://social.msdn.Microsoft.com/forums/en-us/category/windowshardwaredev

• My basket has the following file and I can't identify, "WLMA70D.tmp."

  My basket has the following file and I can't identify, "WLMA70D.tmp."

  Original title: unknown file

  Its a temporary file created by an application. Temporary (.tmp) files are safe to remove.

  J W Stuart: http://www.pagestart.com

• HowTo: identify the readonly/locked files in LightRoom

  Dear member of the community.

  
  

  If you're like me, you'll score sometimes (Nikon calls it "lock" - at the level of the file system image is simply marked read-only) a photo in the field.  The idea being that:

  1. you don't want to accidentally remove a superb photo of the device, and
  2. marking photography makes it easy to identify the winners of the real in post-production.

  As far as I know, there is no easy way to ask to Lightroom:

  • 'don't show me the photos that have been marked read-only', or
  • "Name the files read-only red.
    

  
  

  I thought it would be a relatively simple task, but for the life of me I can't find a simple way to achieve this.  I missed something, or is this all just not supported by Lightroom?

  Optionally you can provide guidance would be greatly appreciated!

  ADDITIONAL CONTEXT

  • Nikon D7100
  • 4.4 Lightroom
  • I copy my photos from the memory card to the hard disk using a memory card reader.  The files are then "added" to Lightroom, thus keeping the file read-only attribute.

  You're right: Lightroom does not support this feature, and it requires a script or plugin.

  Perhaps the best way is to use a simple script (not a plugin), I wrote - it's free:

  Script name: select of Photos of Read-Only.

  Screenshot:

  

  Download here: robcole.com - MiscLrScripts

  PS - I think John Beardsworth has also something to do.

  Rob

• Identify the elements of L1 backup and restore the last control file

  DB version: 11.2
  Platform: Solaris 11
  
  We went to a database of development last month. But we kept backups rman Level0 and Level1 more archive logs generated after the last L1.
  Our N0 and N1 were planned with an interval of 4 days.
  
  The dev team now wants this DB restore in another machine. In a catalog schema, we did not keep the rman metadata. All we have is the backup pieces.
  

  stcdev_p4lor85q_1_1.bkp
  stcdev_yls3gkjl_3_7.bkp
  stcdev_mhfr8293_5_4.bkp
  stcdev_ipxsr8293_5_4.bkp
  .
  .
  .

  I don't know which of the backup are those who is from L0 and L1. If I managed to restore the last file to control the last backup of L1, then things will be easy. What happens if I am wrong to restore the old file of control of L0, which has no info on any new datafiles/tempfiles that I added after than L0.
  
  You guys, how such situations?

  After you restore the controlfile, simply ALTER DATABASE MOUNT, and delivers then a BACKUP of the LIST. The list will show you what knows the controlfile-if it shows the L0 and L1 of backups, you can use it. If it shows only the L0 backup, try to restore the 'other' controlfile.
  If you can see the timestamps of the backuppieces, which could help identify who's the backup "later."

  Hemant K Collette

• B2B 11 GR 1 matter unable to identify the EDI document via the channel look file

  Hello
  
  I was wondering if someone might have encountered this problem, I see a bit of noise on this forum about recognition of documents, and this may sound familiar to some of you...
  
  It is necessary to configure B2B 11 g (11.1.1.2) to query a file from a certain location. In 10g, there is an option to create the directory name of the poll with a certain convention %FROM_PARTY%_TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%.edi etc., but this option is totally removed from 11 GR 1 material, so the only option is to go for changed file name (with the same format as above).
  
  Now I have to deal with incoming EDI files, so creaed the file with the above names naming convention and configured a channel listen to extract the file. The EDI file is simple with normal elements of ISA, GS and functional group, also passing thro validation documents Editor. B2B pulls, Archive it, but during the identification phase, he simply out craps with the following messages in the journal:
  
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: []
  intNode name: Interchange
  ]]
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeControlVersion Val = 00401
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeReceiverID Val = XXXXXXXX
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeReceiverQual Val = 12
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeSenderID Val = YYYYY
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeSenderQual Val = 08
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: ISA Key = InterchangeUsageIndicator Val = T
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: standard = X 12
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processIntNode: number of nodes group = 0
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: processNode: number of nodes to Exchange > 1
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] [EDIDocumentPlugin: processNode: counterProperties >]
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: identifyIncomingDocument: no IDE or HL7
  [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] EDIDocumentPlugin: identifyIncomingDocument: no IDE or HL7. Return
  [2011-03-16 T 13: 19:11.476 - 04:00] [soa_server1] [ERROR] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@2fa8a24d] [username: < anonymous >] [ecid: 0000Iuz2yY3CwklqwsJb6G1DW8Ew000031, 0] [APP: soa-infra] error -: B2B-50083: Protocol for the identification of the Document error. [[
  at oracle.tip.b2b.engine.Engine.identifyDocument(Engine.java:4203)
  at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:1850)
  at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1395)
  at oracle.tip.b2b.engine.Engine.incomingContinueProcess(Engine.java:3216)
  at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:2960)
  at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2706)
  at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:540)
  at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:200)
  to oracle.integration.platform.blocks.executor.WorkManagerExecutor$ 1.run(WorkManagerExecutor.java:77)
  to weblogic.work.j2ee.J2EEWorkManager$ WorkWithListener.run (J2EEWorkManager.java:183)
  at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
  
  ]]
  
  I am unable to understand what makes the engine EDI to throw the paper away when everything is in order? Just to clarify, there are also a commercial partnership with ECS, configuration files and agreements XSD.
  
  I see a similar discussion at 11g - inbound configuration for any group or no header Exchange with no resolution.
  
  Pointers?
  
  Concerning

  B2B understood the agreement to be executed in spite of not providing the name file name or dir (% TO_PARTY % etc...) convention. Remains to be seen if they made any changes specific to the PS2.

  Essentially arrivals, file name or directory name is used to identify the TP which sends the document, but there is in the case of EDI and other parameters that can be used for the identification of TP as ISA and GS headers. So, even if the identification of TP with the help of file name or directory name fails, always TP can be identified on the basis of present envelope parameters in the EDI message. You can view-

  http://www.b2bgurus.com/2007/08/trading-partner-identification-in-EDI.html

  Above blog is for B2B 10 g and where he mentions some properties to set, but these properties are part of the product of g 11 B2B itself and therefore, no additional configuration is necessary.

  Finally I discovered that the problem of managing EDI is the line breaks. When I provide the entire load in one line, the B2B is able to implement the agreement, but when I the segment using line breaks separate the same error is thrown.

  IDE itself is a delimited file that uses it's own delimiters (known as o delimiters EDI separators) to separate the segments, elements etc. Even from every part of the IDE has fixed length designed in ecs file. If you insert a line break between the two, then this file will become invalid because you're characters additional ading inside (line break is a character) and engine EDI will not be able to analyze this document. This is according to the standard guidelines and nothing specific to Oracle B2B. So do not add in additional characters (including line breaks)

  Kind regards
  Anuj

• How to identify the expressions of folklore in the lot while reading File adapter

  Hello
  I have a bepl process to read data from a batch of 100 records text file and write in an Oracle EBS interface table.
  After the completion of the above, I have to call a partner link.
  Problem here is that, how to identify the expressions of folklore, so that I could call my link partner in BPEL.
  How do I get there? Any help is greatly appreciated.

  Hello

  You can implement a separate process, say FileNotificationProcess, you call the link partner, based on the batch Manager wsdl to $ORACLE_HOME/bpel/system/xmllib/jca/BatchManager.wsdl. This new process would be notified of different States of the file reading activity:
  # onBatchReadStart - indicates when a file is started to read
  # onBatchReadComplete - indicates when a file is done playing
  # onBatchReadFailure - tells when a record cannot be processed by the infrastructure of adapters.
  In your case, you would call the partnerlink when a notification of "onBatchReadComplete" is sent.

  In your main process to the file adapter, add the below property, so that the file adapter would inform the new process of the different stages of the processing of batch file.

  bpel://default|FileNotificationProcess
  

  This is described in detail in BPEL best practices guide page 3-18 http://download.oracle.com/technology/tech/soa/soa_best_practices_1013x_drop3.pdf and the article excellent blog of anthony at http://blogs.oracle.com/reynolds/2008/06/more_on_batch_processing_in_bp.html.

  Kind regards
  Yohanna.
  http://www.prshanmu.com/articles/

• Identify the partner EDI X 12 on Trade Protocol file

  Hello
  
  I'm working on the EDI X 12 (835) on the file protocol.
  
  The EDI payloads, I get held same EDI InterchangeIds, group, or Exchange.
  
  Oracle.Tip.adapter.B2B.EDI.identifyFromTP = ANY
  
  and I saw oracle.tip.adapter.b2b.allTPInOneDirectory = false.
  
  So that it identifies the name of the directory-based.
  For this I changed my partners even name as a directory name.
  
  Could you please suggest me is there any other way to identify the negotiating partners to change the name of the trading partner directory name?
  
  Thank you and best regards,
  Suckers.

  Hi Pierre,.

  Yes, TP name and the name of the directory must be the same.

  Set oracle.tip.adapter.b2b.allTPInOneDirectory = true (the Trading partner by the name of the directory Idetifies) in your tip.properties file.

  Check below thread for more information on the identification of the TP-

  Re: Inner channel of Delievery AIP-51505: General Validation error

  Kind regards
  Anuj

  Published by: Anuj Dwivedi on May 5, 2009 16:31

• Try to identify the 2000Mo used on my hardrive xp by "JMRE 2000: c:\program files 1-3 project?

  I ran out of space on my hard drive and I need to clean it.  That's what I see: two entries:

  JMRE 2000 1026 MB

  C:\Program files Project 1

  JMRE 2000 1035 MB

  C:\Program files project 1 #3

  What is c? I can never remember putting this on my hard drive.  Thank you

  I want to get rid of. as its taking a lot of space.

  It is likely that the documents, but a search Google failed to suggest useful for JMRE or JMRE 2000 opportunities.

  Do you mean that there are two files like this:

  C:\Program Files\Project 1\JMRE2000
  C:\Program Files\Project 1 #3\JMRE2000

  Navigate in Windows Explorer to one of the directories
  Click Tools > Folder Options > view
  Click the radio button "show the hidden files and folders".
  Uncheck the box for "Hide extensions of known file types".

  Will there be other files in the directory? What is?
  What is the JMRE2000 file extension (3 characters after the point)?

  Right-click on the JMRE file and select Properties
  If there is a 'Version' tab, click on it (not all files have the Version tabs): useful information here?

  If you wish, you can undo changes made to the Folder Options when you are finished.