Identify the installed database is a DEMO or a database SYSTEM

Similar Questions

• Reg: Export data of the physical database system standby.

  Hi all

  We have a standard edition one 11 GR 1 material oracle environment, I need to export the data from the physical monitoring system.

  If anyone can suggest me, how to do it safely (up state).

  Kind regards

  Konda.

  Oracle Data Guard is available only as a feature of Oracle Database Enterprise Edition. It is not available with Oracle database Standard edition.

  Then you must export data only from primary or you use EXP instead of EXPDP on the standby database. Because EXPDP create a temporary table export process duration.

  Concerning

  Mr. Mahir Quluzade

• problem to connect to the VM database

  Hello
  
  I have a host of windows 7 with vmware 8 and a comment running oracle linux version 6 Update 2 for system
  x86_64 (64-bit). I installed 11 GR 2 database on this subject. The installation went even though it is OK and the database is in place and
  connect very well within the system of comments. The problem is that it does not connect to any part of the outside
  the comments system. An attempt to connect results in TNS-12535: TNS:operation has expired. Even the results of tnsping
  in the same error.
  
  It's results of tnsping from a customer who is not the host or guest. This client can ping the ip
  192.168.1.62.
  
  C:\ > tnsping test
  
  AMT Ping Utility for 32-bit Windows: Release 8.1.7.0.0 - Production on 20 June 20
  12 19:03:45
  
  (c) Copyright 1997 Oracle Corporation. All rights reserved.
  
  Try to contact (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.62) (PORT = 1521))
  TNS-12535: TNS:operation expired
  
  
  The guest system can ping the computers inside the network, and other systems can ping the guest and the host
  systems without any problem. The listener and the database are all the comments system.
  
  The entire communication is inside the firewall, the local network, so the firewall isn't a problem here.
  The only solution I've seen on the internet is to remove the /etc/resolv.conf file (does not work) or use
  NAT networking for the virtual machine. We use networks bridged with static IP for machinery of the host and the guest
  and it seems that others have used the bridged network also.
  
  Is there an obligation to use NAT to make this work? Is there a setting that makes the connection to the guest
  database system possible?
  
  Thank you to everyone who is trying to solve this problem.

  Take a look at EdStevens and other answers on this similar topic
  >
  You probably did not open port 1521 of the firewall (iptables) of linux comments box.
  >
  Re: Connectivity between Local OS(windows 7) and Vm OS(Enterprise Linux)

  Or this link
  http://AWADs.NET/WP/2012/02/21/how-to-connect-to-Oracle-database-on-a-guest-VM-from-the-host/

  If you are looking for 'oracle 11g vm tnsping', you will find a lot of visits.

• Siebel Database Configuration Assistant unable to identify the indexes tablespace

  Hello
  
  I install Siebel CRM 8.1.1 on AIX platform. We have a RAC database has allowed the backend and that two tablespace is created, other data and another for the index. Now in the wizrd of configuration database to the name of these two storage spaces; provide us with the name of tablespae of data in the Tablespace filed Table and index tablespace in the tablespace index rating of the Setup Wizard. Now when we click on the next button. The wizrd of configuration gives error of unable to identify the indexes tablespace.
  
  Why is - what happens as index tablespace is correctly created in the database. Please help me in this. Quick Respance you will be appreciated.
  
  Kind regards
  
  Abgrall

  If you ran:

  change the quota unlimited on user SIEBEL

  ?

• Errors in the charge installing vcenter Server 5.5 with respect to the SQL database

  I do a new install of vCenter Server 5.5 on a new Windows 2008 R2 server. The database for this facility is pointing at a 32-bit Windows 2003 SP2 server. I installed SQL Native Client 10.0 on server vCenter Server 64-bit, and then I could make my DSN ODBC 64-bit connection. The vCenter Server install could very well recognize it, but after the installation got going he wrong on the database with the following error:

  Error 25003.Setup cannot create vCenter Server repository. The main reasons for this failure are:

  -The database is installed using insensitive case.

  -The database is remote and the client database version does not match the database version. If this problem continues to persist, see KB 1003960 for further assistance.

  Well, I know that the version of the client and the version of database do not match. SQL native client on the sql server is 9.00.5000.00 and the version on the server vCenter Server is 10.50.1600.1.

  I know that this version of vCenter is compatible with an installation of 32-bit sql server 2005 on a 32-bit server, 2003.

  I am not familiar too if they want upgrade me sql native client on the sql server, but is not compatible with the version of sql server on this server and there are several database for other applications on this server, so I don't want to jump into something like that.

  Any help would be greatly appreciated.

  Thank you.

  I install the native client SQL 2005 and give a shot.

• I can't installed my AI of lightroom j recut in cd error message is "Advisor to identify the problem to support the following problem has been met the instalation n d programe has s could not initialize download Adobe" what I wanted to f

  I can't installed my AI of lightroom j recut the cd en error message is "Advisor to identify the problem to support the following problem has been met the instalation n d programe has s could not initialize download Adobe" what I wanted to do but this programe n exists more so know what to do?

  Please refer to the site link below and try the troubleshooting mentioned:

  https://forums.Adobe.com/thread/1848277

• Is it possible to more a form letter to the recipients identified in a database (names, addresses, etc.)?

  Is it possible to more a form letter to make the process more product separate PDFs, one for each recipient identified in a database (names, addresses, etc.)?

  Or is - it possible to more type a letter so that the more process produces one big file that contains a copy of the form for each letter recipients identified in a database?

  Hi marceepoo,

  If you use Word for Windows, you can of course. See Adobe Acrobat X Pro * create PDFs from Word mail

  Best,

  Sara

• Trying to install my CS4 Master Collection on my new computer and it says the Installer database is corrupt?

  I just got a new computer because my last one died and I can not install my CS4.  I know it's old, but I've spent more than $1000 on it and it worked very well for me.  When I try to install it gives me an error message saying that the Installer database is corrupt.  Try to install on a system Windows 8. Help, please!

  Thank you, Jeff.  I found on another thread to uninstall other Adobe products and then install them after you have installed the CS product.  I uninstalled elements and CS4 installs fine now.  It's kind of a pain, but at least I can use it again.  I hope that I can re - install items with no problem, I like to use the photo database in the program elements.  Thanks again.

• How to resolve the message "the Installer database is corrupt" when trying to install CS4 on Win 8.1?

  I bought a set of CS4 disks a few years back and have recently bought a new computer. When you try to install CS4 on the new computer, I received an error message saying "the Installer database is corrupt. Please contact Adobe customer support. "Called 'customer service' and after a VERY long period and three transfers, I was told" both worse, we cannot help you. " Maybe download a new copy? "So I did. When you try to install the new download, I got the exact same error message: "Installer database is corrupt. Please contact Adobe customer support. "This seems to be a conflict between the database install CS4 and 8.1 Win. Is this a known issue? How can I fix it? Thanks for any help. ~ Evey

  Error «...» The Installer database is corrupt... "when you install Adobe Creative Suite 4 or point product

• Identify the level constarints table in a database

  Hi all
  
  Y at - it any specific query that can help me identify the constraints of level table for oracle 9i database.
  
  Thank you in advace

  Hi Vincent,.

  To list the constraints for all tables in the schema/user.

  Query:

  SELECT TABLE_NAME, CONSTRAINT_NAME,
         DECODE (CONSTRAINT_TYPE,
                 'C', 'Check',
                 'O', 'R/O View',
                 'P', 'Primary',
                 'R', 'Foreign',
                 'U', 'Unique',
                 'V', 'Check view'
                ) CONSTRAINT_TYPE,
         STATUS
    FROM USER_CONSTRAINTS;
  

  Thank you
  Shankar

• Installing Vcenter new server with the new database

  Hello

  We currently have the virtual Center 2.5 with SQL express back-end and we are planning to upgrade to vcenter server with Oracle backend. My original plan was to start over by installing vcenter on a temporary server with Oracle and eventually return the current server vcenter and use the same Oracle server. What would be the simplest solution for this? Essentially, in the end, we need to use the current server to vcenter but move from the db to the Oracle database. Our group consists of 3 servers and only active DRS at present (HA disabled for this upgrade). Can I upgrade the current virtual Center vcenter server directly and do fresh install for the Oracle database?

  Thank you

  I would also install a new server vCenter thr.

  After that, make a new configuration and Noor and if everything works correctly, uninstall the old und VC 2.5 check also the HA!

  Good luck!

• How to install the new database on the same server peoplesoft

  Hi people,
  
  I have the people tools 8.52 and financial 9.1 on my windows 2008 server where I use my database in ms SQL Server 2008 R2.we created a demo base data and configured PIA which works very well.
  
  Suppose if I want to create two databases more in the same server for different environments, which is the best way to do it?
  
  should I just create two databases in sql server and run scripts as utlspace.sql, fcddl.sql, dbowner.sql... like that then create new domain in with psadmin and areas Web servers application servers?
  
  or
  
  I should run PS_HOME\setup\PsMpDbInstall command, and then create database system etc etc?
  
  
  Please let me know for any information on this topic.

  Hello

  As Nevin said, both do the same thing, another automatic manual.

  If you choose to use PsMpDbInstall, to choose Assistant option existing Create database on the server instead of set up a server and create a database

  I prefer to run the scripts manually, that gives me more control and view the measures taken, but it is a personal choice.

  Halin

• I try to install Dreamweaver CS3 on Windows 8, it said "the Installer database is corrupt"

  I am trying to install Dreamweaver CS3 on my new Windows 8 PC and when I run the installation program. EXE, it says "the Installer database is corrupt" on my original CD and the backup that I did.

  The error is here:

  Dreamweaver CS3 on my new PC in Windows 8

  It would probably never work. CS3 is same not hold for Win 7. Delete the caps.db in the folder selections respective (info here) and then take the usual steps to run as administrator, disable UAC and security tools and possibly using compatibility modes, but as I said, be prepared that this may be useless and you spend a Sunday afternoon without achieving anything whatsoever...

  Mylenium

• Recover the Oracle Database 11 to the host of the new building installed

  Hello
  
  I want to test the recovery of an Oracle 11 database that has been saved with RMAN and "controlfile autobackup on."
  The RMAN Repository is in the controlfiles (no catalog database has been used).
  
  I have a complete backup of the database, the archvies since the last backup and the redologs - the old database until online where the
  database 'crashed' :-)
  (to tell you the truth: I have backup ups sqlnet.ora, listener.ora.) And backups of PWDmpausch.ora and SPFILEMPAUSCH. ORA. But I think that
  It should be possible to recover the database without this file)
  
  On a new installed host, I did a bog Oracle 11 Standard Edition only software installation standard.
  Operating system is Windows XP SP2
  (D:\oracle\ora11) ORACLE_HOME and ORACLE_BASE (d:\oracle) are the same as on the old system.
  
  After the installation of the Oracle software, I have none of the configurations. (No tnsnames.ora, listener.ora no).
  There is only a default sqlnet.ora in %ORACLE_HOME%\network\admin with a single entry: SQLNET. AUTHENTICATION_SERVICES = (NTS)
  
  In documentation, I found that I read "startup nomount" database with a minimum setting or basis file.
  I tried to use the default init.ora in % ORACLE_HOME%\dbs\init.ora. (I just changed the "ORCL" db_name to 'mpausch')
  The steps I did:
  define the ORACLE_BASE = d:\oracle
  set ORACLE_HOME = d:\oracle\ora11
  Set ORACLE_SID = mpausch
  sqlplus/nolog
  SQL > startup nomount pfile=d:\oracle\ora11\dbs\init.ora
  
  But the only thing I get is a: ORA-12560: TNS:protocol adapter error
  And
  SQL > connect / as sysdba
  also, does not produce an ORA-12560.
  
  
  So, I configured an earpiece and a local name (with Net Configuration Assistant). But only the error message I get
  is it ORA-12560.
  
  What do I need to configure to be able to start the instance with the minimum setting file?
  
  Kind regards.
  
  mpausch

  Make sure that you create the Windows Oracle service with oradim.

• The upgrade to vCenter Server to vCenter Server 5.1 5.1 update 1 when the SQL database is remote and vCenter Server Heartbeat is installed

  Hi guys,.

  I'm in the middle of an upgrade to vSphere 5.1 5.1 vSphere update 1. I have vCenter protected by HB and SQL on a separate computer (also protected by HB) I also run Syslog, Update Manager and Proxy authentication on vCenter.

  I've successfully upgraded HB on all 4 nodes (2 x vCenter & 2 x SQL) and started the upgrade components on the secondary according to the •vCenter Server Heartbeat 6.5 server and vCenter Update 1 Installation on Windows Server 2008 when the secondary server is virtual (PDF) http://www.vmware.com/pdf/vcenter-server-heartbeat-65-u1-installation-windows-2008-virtual-guide.pdf

  I got to step 3.c

  3. change the primary/active server role:

  a launch of the vCenter Server Heartbeat wizard configure server and click the tab of the Machine to change the server role for the current server (primary) to the active State and click Finish.

  b using the Service Control Manager, start the Server Heartbeat of VMware vCenter service.

  c using the vCenter Server Heartbeat Console, check that all the status icons on the server: summary page are green indicating that the boot process is completed and protected from all the services are started.

  d using the Service Control Manager, stop the service Server Heartbeat of VMware vCenter.

  As the vCenter service does not start, I'm stuck at this point. As far as I'm concerned, the error is quite logical. I've updated vCenter using the secondary server, and then I'm trying to connect (according to the guide) with another version that breaks down.

  If I continue with the services stop and launch the installer SSO, it is trying to perform an uninstall!

  Did I miss something in this upgrade?

  Concerning

  
  Ciaran

  Hi guys, VMware have finally updated the documentation to reflect the right way forward: https://www.vmware.com/support/pubs/heartbeat_pubs.html U1 6.5 Select from the menu drop-down and you'll see the last date of update for each of the documentation is now 10/10/2013. The guide States now specifically to restore the vCenter database before proceeding with any other measure, this is copied below for convenience: "the upgrade of the main server of the upgrade process further guess upgrading the secondary server completed successfully. Procedure 1 before continuing the upgrade process, perform a restore of the database of vCenter Server, Single Sign-On database, VMware Update Manager database and SSL certificates that were backed up in step 4 on the secondary server. regards Ciaran