Identify the value of the property of the previous node
I need calculate a value based on the value of a previous node. How to define 'ownership Params' accomplish deriving from this value. Read the previous node everything it's on position, his mother, leaf or branch, simple low previous node to the next node to the top node.Thank you.
user3529875
Just an info
In addition, you have a problem, the solution of which the user provided before me is that the siblings will have the same value, if you add 1 to the value of the parent node will cause a parent can have as many children... so it will be difficult to sort out the basic level.
Please correct me if I'm wrong
Thank you
Tags: Business Intelligence
Similar Questions
-
How to identify the iSCSI nodes?
How to identify the iSCSI nodes?
with IQN
-
Need your help to identify the parent nodes
Hello Experts,
I came across a requirement for a company where I get it either parent or child.
In detail:
Each node in the hierarchy was built as branch nodes and I see not all leaf nodes and the target system referencing the Core.Leaf property to determine if it is a parent or child, now, I have to change the process so that
If the node does not have children even though he is a member, then the property should give as the child of another parent.
Please help me with this requirement.
Please let me know if you need other details as well, as I am now learning DRM so there may be some gorgonians in my language
There is a function called IsBottomNode(), you can take advantage of this feature to your needs.
If (IsBottomNode (ABBREV (()), Child, parent)
-
Validation on Delete / Cancel based on the value in a property
Hi all
Can it be a validation or put on a hierarchy such as if a node in the hierarchy is deleted / canceled it generates an error if one of the associated nodes property has a value of stress?
We have a hierarchy target which maps to various sources via the associated nodes property. We frequently update the source hierarchies and mapping of source hierarchies, but the target is not updated that frequently.
While regular maintenance, a user can delete a hierarchy node accidentally target because of which mapping sources would be gone. Is there a validation that can be written so that if a node is deleted, removed or cancelled in the target hierarchy it generates an error if the property mapping is filled?
Thank you
Sam
You can use the 'PropRemove' of validation class. It allows you to select up to three properties to check (repeat one if you don't need that much) and provide you values for the properties that would make the validation fails. You can create a new derived property, which returns true or false based on knowledge if it has associated with nodes.
-
The default value for a property with data of type boolean
Hi all
Is it a system preference setting, where the default value for a property with data of type boolean can be a Virgin? I want to keep the value by default in a vacuum, but every time I save the property even after empty selection, the default value changes to FALSE.
In this case Boolean doesn't help you, you mayneed to create a chain of ownership and have true/false / "" as your list of values
-
Error: ORA-16757: failed to get the value of this property
Hi all
I have an error:
DGMGRL > see the database dbname_stb LogXptStatus;
Error: ORA-16757: failed to get the value of this property
I check:
DGMGRL > see the configuration;
Configuration - dbname_dg
Protection mode: MaxPerformance
Databases:
dbname_pr - primary database
dbname_stb - physical of the standby database
Fast-Start Failover: DISABLED
The configuration status:
SUCCESS
drcdbname_stb.log:
RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
I don't understand this error?
Thank you all.Take a look on this
-
Identify the Start Date, based on other summary values.
I am runing:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 64 bit Production
PL/SQL Release 11.2.0.1.0 - ProductionCORE11.2.0.1.0 Production
AMT for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Here are the general dateset that I try.
with dateset as)
Select 1 worker, 8 totalhours, 27 April 15 ' work date, 1 installation, 35 production of all the double union
Select 1, 8, April 26, 15 ', 1, 35 of all the double union
Select 1, 0, 25 April 15 ', 1, 0 of all the double union
Select 1, 0, 24 April 15 ', 1, 0 of all the double union
Select 1, 6, 23 April 15 ', 1, 20 of all the double union
Select 1, 7, April 22, 15 ', 1, 27 union double all the
Select 2, 4, April 24, 15 ', 1, 15 union double all the
Select 2, 4, April 27, 15 ', 1, 15 union double all the
Select 2, 4, April 22, 15 ', 1, 15 union double all the
Select 3, 6, 26 April 15 ', 2, 32 union double all the
Select 3, 6, April 25, 15 ', 2, 32 union double all the
Select 3, 6, 24 April 15 ', 2, 32 union double all the
Select 3, 6, 22 April 15 ', 2, 32 union double all the
Select 3, 6, 23 April 15 ', 2, 32 double
)Select
*
of datesetI'm trying to get a date range or have the identified dates for the first harvest of the end date and then have hours max per each day added up to at least 15 hours and find the total production to examine these days that are.
So, if I choose the end date of April 25, 15 ', then I identified the maximum working hours at the facility. So because no work was allocated to the 25 for installation 1, 24 is the actual start date, in a plant worker 2 3 had 6 hours work, if installation date of end is the 25 hours max of 6. Noticed that the installation has 24, 23 and 22 total hours bing 17 (always meets the requirements of 15 hours), while the installation of 2 has 18 hours 25, 24, 23 (requirement for hours 15 min)
This is the prison of result data group.
with datasettwo like)
Select 4 maxhours, 24 April 15 ' work date, 1 installation, 15 totalproduction of all the double union
Select 6, April 23, 15 ', 1, 20 of all the double union
Select 7, April 22, 15 ', 1, 27 union double all the
Select 6, April 25, 15 ', 2, 32 union double all the
Select 6, April 24, 15 ', 2, 32 union double all the
Select 6, April 23, 15 ', 2, 32 double
)Select
*
of datasettwo
order by
installation
date descso, how would I go about konwing when start work Date date has been reached because the total number of hours has been reached or excited the limit.
All thoughts.
With the help of everyone, thank you,
It's the rough solution I was looking for, could probably be cleaner.
I apologize for the confusion.
so, for April 27, the total production for that day for installation 1 is 50 units and 8 hours max.
and if the end date is sent to the 24
April 22 is the total output of 32 units and hours max of 6 for this day.
with dateset as)
Select 1 worker, 8 totalhours, 27 April 15 ' work date, 1 installation, 35 production of all the double union
Select 1, 8, April 26, 15 ', 1, 35 of all the double union
Select 1, 0, 25 April 15 ', 1, 0 of all the double union
Select 1, 0, 24 April 15 ', 1, 0 of all the double union
Select 1, 6, 23 April 15 ', 1, 20 of all the double union
Select 1, 7, April 22, 15 ', 1, 27 union double all the
Select 2, 4, April 24, 15 ', 1, 15 union double all the
Select 2, 4, April 27, 15 ', 1, 15 union double all the
Select 2, 4, April 22, 15 ', 1, 15 union double all the
Select 3, 6, 26 April 15 ', 2, 32 union double all the
Select 3, 6, April 25, 15 ', 2, 32 union double all the
Select 3, 6, 24 April 15 ', 2, 32 union double all the
Select 3, 6, 22 April 15 ', 2, 32 union double all the
Select 3, 6, April 27, 15 ', 2, 32 double
)Select
installation
date of work
totalproductionperday
maxhoursperday
sum (maxhoursperday) on totalhours (installation partition)from (select distinct)
installation
date of work
maxhoursperday
totalproductionperday
, case when sum (maxhoursperday) over (partition by order of ease by date desc)
-sum (maxhoursperday) over (partition by establishment, work date)<>
then 'Y '.
another "n".
end to_include
(select
installation
date of work
max (totalhours) maxhoursperday
sum (production) totalproductionperday
of dateset
where date of work<= to_date(:enddate,="" 'dd-mon-rr')="" --="" end="" date="">=>
Group
installation
date of work
)
)where to_include like 'Y '.
order by
installation
date desc -
How to identify the primary Parent of a shared node?
We have a property that is set to Local defined, inherit,
Suppose the 'Color' property and currently is the behavior in DRM
Parent A - blue
Child 1 - blue (inherited from Parent)
Child 2 - color blue (inherited from Parent)
Child 3-color blue (inherited from Parent)
Parent B - Red
Child 3 ~ part 1 - red color (inherited from Parent B)
Child 4-color red (inherited from Parent B)
Children 5 - red color (inherited from Parent B)
The customer has improved the requirement so that in the case of shared members 'color' is inherited from the primary parent like the example below.
Parent B - Red
Child 3 ~ action1 - blue (inherited from "Primary" Parent A)
Child 4-color red (inherited from Parent B)
Children 5 - red color (inherited from Parent B)
I guess I'm going to need a new property like 'Primary colors' and I need to write a formula to calculate the color of base on the primary parent. However, I do not know how to identify the "main Parent" a shared node we use version 11.1.1.2 N-Tier
I'm looking for suggestions on how to calculate the value of the property you want.
Any help will be greatly appreciated.
Hello
You can create a new property derived like u said and use instead of the property defined in your exports or anywhere where you have to refer to the color. The property set can be used just to take the user input.
The new derived property should be a logic like that-
If (PropValue (Core.SharedFlag_MDM),
NodePropValue (PropValue (Core.PrimaryName_MDM), Custom.Colour)
PropValue (Custom.Colour))
Now, 11.1.1.2 I lost the memory of how the properties are referred to as - if they are just used with their names or namespaces is mentioned (Core. , custom.). You can change the formula accordingly to view properties
Thus, if SharedFlag_MDM is True, then it will take the value of the property to its primary node, which is inherited from the primary parent and if the shared flag is False then it is just a varValeurProp on the node itself.
I hope that answers you.
Thank you
Denzz
-
Identify the field updated or deleted in the Contacts.
Hi all
I have a question.
I write PIMListListener for contacts.
is it possible to identify the updted or remove fields in contacts using pimlements of PIMListListener?
Thanks in advance.
Sorry for my English.
As far as I know, there are no specific listener that will tell you what specific item field has been updated. You must write your own logic to him.
Will implementation of PIMListListene, you know what PIMItem has been added, deleted, or updated. In the case of update, this listening port will also give you the old PIMItem object to the new object PIMItem.
itemRemoved (PointPIMItem )
itemUpdated (PIMItem oldItem, PIMItem newItem)
You can get the value of fields using object PIMItem methods and compare those values for the required information updattion. It's your own logic.
If someone can suggest a better approach, please go ahead.
~ Brigitte
-
Need help to identify the type of object in the loop of pl/sql
Hello
I need help to identify the Type of object declared beneath a procedure as shown below:
I need to pass the parameter to the procedure as a TYPE of OBJECT and also refer to variables of Type Object in a loop
create or replace type TEST_VALIDATION_REC is RECORD (order_num varchar2 (30),)
number of inventory_item_id
reserved_YN varchar2 (1).
error_flag varchar2 (1).
Error_message varchar2 (2000)
);
CREATE OR REPLACE TYPE VALD_TBL AS VARRAY (10000) OF TEST_VALIDATION_REC;
PROCEDURE ADD_TO_ORD)
p_lot_number_list IN VALD_TBL,
p_ord_number IN Varchar2,
p_user_id in NUMBER: = fnd_profile.value ('USER_ID'),-change 1.10
p_responsibility_id in NUMBERS: = fnd_profile.value ('RESP_ID'),-change 1.10
p_application_id IN VARCHAR2: = 'PO',-change 1.10
x_error_flag OUT Varchar2,
x_error_msg OUT Varchar2
)
In the above procedure, I had the VALD_TBL. Is it OK?
And how in the loop if the records if I use:
FOR indx1 IN 1.p_lot_number_list. COUNTY
LOOP
BEGIN
SELECT
inventory_item_id
IN
ln_item_id
Of
dummy_lot_tab
WHERE
lot_number = p_lot_number_list (indx1); - > how direct the item here?
EXCEPTION
WHILE OTHERS THEN
ln_item_id: = NULL;
END;
Records are PL/SQL objects. They are not the SQL objects. You can create a SQL TYPE (schema level) as a collection (variable-tables only, tables nested).
So therefore your first statement is syntactically incorrect
CREATE OR REPLACE TYPE TEST_VALIDATION_REC IS RECORD (order_num VARCHAR2(30), inventory_item_id NUMBER, reserved_YN VARCHAR2(1), error_flag VARCHAR2(1), Error_message VARCHAR2(2000) );
You must put in an anonymous PL/SQL block or the stored procedure
DECLARE TYPE test_validation_rec IS RECORD ( order_num VARCHAR2(30), inventory_item_id NUMBER, reserved_YN VARCHAR2(1), error_flag VARCHAR2(1), error_message VARCHAR2(2000) ); TYPE vald_tbl iS VARRAY(10000) OF test_validation_rec; lv_tbl vald_tbl; BEGIN lv_tbl := vald_tbl(); -- insert your code here END;
-
Action Script to add a node value parent for the top node
I need to add a new value of the node parent to a hierarchy to the top node. The script parameters to add a node is "Add | Version | Hierarchy | Node | Parent Node. Property sheet. " I am at a loss on what to do for the top node because there is no node Parent above this level, but the settings ask him. I have reviewed the manual and the manual of admin, but did not help. Can someone help me?
Thank you!
You have the answer with you, do not be confused between the Parent node and the top node context, when adding a new node, the node of your Top will become your Parent node.
' Add | Version | Hierarchy | Node | Parent Node. Property of the worksheet.
If you're still confused, just do the following.
1. right click on the node of your top and add a new worksheet or node branch manually
2. Once added, go back to the homepage-> Script
3. Select the Type of Source in the paper transactions, and then select the newly added node and load
4. in the lower part select Script-> download-> Download Action Script.
5. open in a Notepad and use to create your new script.
-
identify the State of a new line created in VO before committing
Hello world
I use jdev 11.1.1.7.0
Is it possible to identify the State of a new line created in VO before committing (I mean that we can realize that this line is new without use of isDirty())
Habib
Concerning
Ashish Awasthi blogged about this earlier. I have used this method in all my projects since I found it, and it works fine.
http://www.awasthiashish.com/2014/04/performing-partial-rollback-undo.html
This code is the interesting part for your need:
public Integer getRowStatusTrans() {}
/ * Here the rank is variable reference in the collection, this expression returns an int value if it is
2 change
0-new
1 - unmodified
initialized-1-
*/
entityState bytes = this.getEntity (0) .getEntityState ();
return new Integer (entityState);
}
-
SQL use the previous value of subselect in the subselect, the right way?
Hi all!
Today is Friday and I got a problem.
I try to use the value of the previous Subselect statement in a subselect statement but could not find the right way to do this , need help and advice
Error: [1]: ORA-00904: "PARENT_ID": invalid identifier
Error on line 5
SELECT INITCAP(aapt.pow) , aapt.woj , (SELECT id FROM adm_address aad where aad.name = INITCAP(aapt.woj) AND aad.address_type ='N') as parent_id, (SELECT id FROM adm_address aad where aad.name = INITCAP(aapt.pow) AND aad.address_type ='D' AND aad.adm_addres_id = parent_id) as id FROM AMD_ADDRESS_PL_TMP aapt GROUP BY pow,woj
Guaraanteed of helpful answers!
Thank you!
Hello
You can't do that. You should probably use a hierarchical query instead of your scalar subqueries to extract lines children and parents and then join the AMD_ADDRESS_PL_TMP table.
Moreover, why the clause GROUP BY here?
-
How to identify the current row in the table of selectOneChoice compact mode
Hello
I have an af:table in which one of the columns is selectOneChoice in compact mode. When you select the point in this selectOneChoice, valueChangeListener fires and do some work based on this line. However, my problem is that it is difficult to identify the current line, because the selectOneChoice is in compact mode. If the selectOneChoice is not in compact mode, when the user selects an item in selectOnechoice, af selectionListener: table is triggered to identify the current row. But if selectOneChoice is in compact mode, user has the option to choose from selectOneChoice and valueChangeListener fires before af selectionListener: table is triggered. Therefore, not able to identify the current row.
As a workaround is not so perfect, I tried to put the line identifier (in my case it is DetailSeq) in shortDesc and do it from there. But users complain seeing this not user-friendly in shortDesc/hintText. I tried to put DetailSeq as the id of the selectOneChoice, but it works not (cannot get the selectOneChoice in the table Id)
< af:table >
....
< af:column = 'Action' id headerText = "c5" width = "30" >
< af:selectOneChoice id = "has$ {row.» AutoSubmit DetailSeq}' = 'true' valueChangeListener = "#{viewScope.backing_requestOverview.onSelectAction}" label = "Action" mode = "compact" shortDesc = "#{row." " DetailSeq} ">"
< f: selectItems value = "#{backing_requestOverview.requestActionsMap [row." StatusUid]}"id ="si333"/ >
< / af:selectOneChoice >
< / af:column >
....
< / af:table >
In the valueChangeListener:
{} public void onSelectAction (ValueChangeEvent valueChangeEvent)
RichSelectOneChoice actionChoice = (RichSelectOneChoice) valueChangeEvent.getComponent ();
LOGGER.info ("Short Desc:" + actionChoice.getShortDesc ());
LOGGER.info ("Id of the component:" + actionChoice.getId ());
}
Any advice?
Thank you
-Mina
Have you tried the setPropertyListener?
Timo
-
Using the Singleton Pattern to keep the values of the previous variables?
Is it possible using ExtendScript to retain the previous property, same value once it has been updated by the user? I know after effects update images expressions, but I believe that the values of script must be able to persist. This kind of thing is possible with ExtendScript?
I think something like this should be achievable using a singleton as a model, but so far I've succumbed. Here's what I've tried so far:
instance of the var;
Check the value of the current instance
Alert (GetInstance () .value);
Check if the instance has a value, if this is not the case assign one, otherwise return the current value
function getInstance() {}
{if(!instance)}
instance = createInstance();
}
return instance;
} //End getInstance
Create the new object with a value and return it
function createInstance() {}
var object = new Object (mySel.property("Effects") ("Transform") .property .property (1));
Returns the object;
} //End createInstance
Or, if singletons are the wrong approach is there any type of storage mechanism that can be called in ExtendScript to write values?
Thank you!
I don't know (which means no there are not), but maybe your problem could be simplified.
Your best chance would be to want to want to know if the property is changed at all, in which case you can use p.isModified.
But if you want to know if it has been modified since the last change, then its a different story. Properties objects cannot be instantiated on their own, they are related to the actual properties in layers and cannot be "frozen".
Brutal way:
If the property is suspected of having a set of keys, you would be better of caching the stream of values in a table;
Otherwise be cached keys (still many things to do... times, values, tweens) and the expression, but then comparing two States can be uncomfortable.
.. for every p in your effect.
I hope that you will get a better answer
Xavier.
Maybe you are looking for
-
Having an intermittent problem (90% of the time) by creating and answering emails in Hotmail. We read emails OK and trying to write or reply to an email all other aspects of the page are very good (menus, to:, CC:, subject of boxes etc.) except for t
-
I can not play CD on my laptop because I restored it back to factory settings
Separated from this thread. I can not play CD on my laptop because I restored it back to factory settings
-
Net-broadcast event window 2.0.0 is 'end now' when I turn off the computer
Every time I shut down the computer 'end now' comes up with net-broadcast event windows 2.0.0 and also hidden shellcon comes up "end now". What is and how to remove it?
-
Is there a good reason to install the new firmware?
I have 2.03.31 and it seems to be happy. I'd rather just here, unless someone can tell me cool bell or whistle that is available in 2.03.33. Val
-
How to prevent taxpayers who passes and opening in EXCEL as it should? Thanks in advance for any response.