If - and statements

Similar Questions

• my computer becomes a * STOP: 0 x 00000050(0xf226dc2E,0x00000001,0xEE6SSF10,0x00000000) screen and States blue, I don't know what to do about this

  my computer becomes a * STOP: 0 x 00000050(0xf226dc2E,0x00000001,0xEE6SSF10,0x00000000) screen and States blue, I don't know what to do about this

  It is the same procedure.  Have you checked all the links in the post?

  I want to thank you for your time. I couldn't hardly on internet. Microsoft helped me and fixed it is a program that was not compatible. Thank you once again

• I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?

  I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?   using DreamWeaver CC

  Among the contributors here has a nice page explaining how to do what you want, using css.

  Indicator of persisting in the Menus - Page http://alt-web.com/

• event and state machine

  Hello

  I have a problem when I want to set up an event in my state machine.

  The state machine is reading communication series through different States 10 +.

  The problem came when I tried to add an event inside the State number 10. In the number of State 9 code seems to work only partially (an option button is not possible to change the value on).

  It seems almost that it is frozen but when I select the code I can see it works well (option button isn't).

  It is strange that when I remove the event in condition 10 all is well again? The event code is not yet performed yet because it is in the frame after!

  Any thoughts?

  I'm under LabView 2013 on a Windows 7 PC.

  I'm trying to figure out which of the two cases is the one who seems to hang if the name would be better than a number.

  When using am event structure you don't we want to use a local variable.  In fact, you should only use local variables on rare occasions that they break the flow of data.  The event structure is fine for the entry.  The problem is the way you treat things after that the button is pressed.  Again, I think you have to look at a design model of producer/consumer with a machine of the State in queue.

  The best way to have a writing occur only after a button must have the code for writing in a case that is active when the button is true and is simply empty, when it has the value false.

• Shift registers and state machines

  I am creating a VI that controls a power supply, a switching system and a nanovoltmeter so that I can measure the Seebeck of different materials. After reading through these forums, it seems that the overwhelming opinion was that the state machine is much better than the structures of the cell, which was what I was going to initially use. However, I have a problem. To control my sourcemeter, I the user to enter the number of steps (time machine increases the voltage), a final voltage and output voltage. Of these, I get the value of the increment. However, within my state machine that the first step is transferred to the structure of the case. I used probes to see how information is moving, and it seems that the voltage value is increment correctly but the real VI for the power supply receives the initial value. I'm just wondering how to pass the updated values in the structure dealing with each iteration.

  I've included the vi. It is far from over because I'm sure you will see, but my current problem in the case of 'change v '. That said, if anything jumps out and you feel the immediate needs, feel free to say it, I learn and I accept all the entries.

  I recommend that you run your VI highlight execution lit.  This will help you understand what's happening better.

  Just to remind, only 1 case in structure can work iteratively.  If you have a TRUE/FALSE in the middle of a VI case structure you plan to run both cases?  Of course not.  Same thing here.

  So keep your current tension in a shift register and increment only when you are in the case of set.  Stop your state machine when your voltage exceeded the stop voltage (have a just State to check this box to make things easier).

• My shows desktop ACTIVE DESKTOP RECOVERY above and States to make off go to properties and uncheck the boxes on the web, but nothing has changed and I can't change the view of the Office either.

  When I go into the properties I can't change desktop theme. Even go to customize and unchecking everything in the web, it doesn't change anything. How can I get rid of this Active Desktop recovery?

  Hi BevBrown,

  You did it of any material changes or software on the computer before this problem?

  If the issue took place recently, try to do a system restore that will repair return the computer to the point while it was working fine.

  How to restore Windows XP to a previous state

  Hope the helps of information.

  Please post back and we do know.

• Apex 5.0 and State of Session with mobile apps

  Hello

  How to display the value of the session state of page to the Apex 5 elements using a mobile application

  When I run the page, there is no toolbar down unlike the version 4.2

  Concerning

  Gus

  Hello Gus,

  When you are in the shared components, you should see a "Flashlight" icon in the toolbar (two icons to the icon to edit the Page xx). This "Find" popup has a tab "Sessions" and "Debug".

  Concerning

  Patrick

• IF / AND statement question

  When you use an if () & & () statement, is it permissible to test two different conditions. Which means, I say, 'if the Apple is red, and if the car is blue, then... ". » ? Or should it be something like: "If the Apple is red and the Apple is big?

  The code below does not work as I'd like, and I wonder if the problem is the & & statement.

  Situation: There are two classes. Class I and class 2 ("Title"). Class I receives life insurance 3 x revenue annual, up to $1,500,000. Class 2 gets life insurance in annual income 3 x, up to $600,000. I have a drop down list, 'Title', with the class I and class II to select, (returning 1 or 2). The calculated field is supposed to return death, life-insurance, according to the conditions of the class and income. He is ignorant of class 2. In other words, I can type any amount of income when class 2 is selected and the death benefit will blow beyond 600,000 and up to 1 500 000.

  Is my problem of how I use & &?

  var a1 = getField("Income").value;   annual income

  var A2 = getField("Title").value;   job class; numeric value of 1 or 2

  var v1 = a1 * 3;   life insurance is 3 times the annual income

  If class I and amount of life insurance is < 1500000, then 3 x annual income

  If ((a2 = 1) & & (v1 < 1500000)) event.value = v1;

  If I have the class and life is > 1500000, then 1500000 (max)

  otherwise if ((a2 = 1) & & (v1 > 1500000)) event.value = 1500000;

  If class I and amount of life insurance is < 600000, then 3 x annual income

  otherwise if ((a2 = 2) & & (v1 < 600000)) event.value = v1;

  If class I and amount of life insurance is > 600000, then max 600000

  otherwise if ((a2 = 2) & & (v1 > 600000)) event.value = 600000;

  Thanks for any help!

  Instead:

  If ((a2 = 1) & (v1)< 1500000))="" event.value="">

  Follow these steps:

  If ((a2 == 1) & (v1)< 1500000))="" event.value="">

  in all cases, and who must fix.

• AND statement

  HI - you can use IN a calculation? I refer to the report user Interactive interface where the end user can create calculations. Thank you!

  Bob Sacamano says:
  I'm sorry. It was a gesture of the recruit. If I want to use it in a CASE statement like this: CASE WHEN (A = 1 AND B = 1) THEN ELSE XY. It generates this error: "invalid calculation expression. AND ".

  Seems to be a bug/feature. Already reported several times in 3.x. Solution is to use nested CASE statements:

  CASE WHEN A=1 THEN CASE WHEN B=1 THEN x ELSE y END ELSE y END
  

• Specific problem with pimples and States

  Hello

  I firstly apologize for use Google Translate :-(

  I have a problem with InDesign does not resolve. That's a digital publication.

  My goal is:

  A 'Gallery' button and the image of the ball appears with three buttons: "Previous Image", "Next Image" and "narrow Gallery.

  I don't want the Gallery either visible, or buttons that control, until the 'Gallery' button, so I think that all the buttons except 'Gallery' by selecting the option 'hidden until this active'.

  I want the gallery and the buttons that control, disappears when I press the "Close Gallery" button.

  What I call 'Gallery' is an image that fills the screen.

  After you have placed the image on your site have become the button property "Hidden until this that active."

  Then convert this key in order to several States (what I will call 'button States') and by successive Governments with the pictures I want to show in the gallery.

  I think that the interactions between the buttons.

  When the 'Gallery' button I attribute the following "I click on the '.

  -"Go to the State."

  -Hide the "Gallery".

  -Show 'narrow Gallery.

  -Show "previous image".

  -Show "next image".

  -Show "States of the button.

  "Previous Image" and "Next Image" buttons are assigned, respectively, to go to the previous state and go to the next State.

  When "Close Gallery" button I attribute the following "I click on the '.

  -Show "Gallery."

  -Hide 'narrow Gallery.

  -Hide "previous image".

  -Hide "next image".

  -Show "States of the button.

  "Previous Image" and "Next Image" buttons are assigned, respectively, to go to the previous state and go to the next State.

  When "Close Gallery" button I attribute the following "I click on the '.

  -Show "Gallery."

  -Hide 'narrow Gallery.

  -Hide "previous image".

  -Hide "next image".

  -Hide the "States of the button.

  I put it to the top and works correctly until I press "close". Then I hide buttons "Close Gallery", "previous image" and "next image" but it keeps me visible "Button States" showing the last image that was shown.

  Don't know how to solve this problem, and I'm going crazy!

  Please can someone help me?

  Maybe the solution is another approach, but without using "Folio overlays.

  Thank you very much.

  I moved your post to the DPS forum.

  I'm afraid of how you do this will not work with DPS.

  This should all be done with a multi state object. The first State would contain anything other than a button to access the first State. After that, set up each State with the appropriate buttons. Without seeing the file, it's a little hard for me to imagine exactly what you want to do.

• Button Rotation and States of text

  Hello

  I'm working on my second project Muse right now, so I'm still kinda a noob.

  My problem is that I want to build the menu white angle with black text buttons which invert to black with white text for flight hover and active modes.

  I realized that although Muse says that "text ranges cannot be edited or formatted by the State [...]" Menu Widgets allow you to do just that by changing the color of text for hover, active, etc.-, but the text is embedded differently in these pre-built widgets when you create your own box (easily adjustable) with the square tool and include your own text manually.

  The only solution I can think is import my own touches several layer of photoshop but it's such a pain in the butt and if I still want to make a small change, it becomes an ordeal.

  Can someone advise?

  Best,

  You can actually have different States of a textframe have different text color, fill color and colors of race among other effects.

  Here is an example that matches your needs according to me: http://textstate.designflame.in/index.html

  See you soon,.

  Vikas

• Confusion in the order of line and statement-level trigger

  Hi can anyone tell me, if I create a trigger on the emp table as in order...
  
  BEFORE INSERTING... LINE LEVEL
  BEFORE INSERTING... LEVEL STMNT
  AFTER INSERTING... LINE LEVEL
  AFTER INSERTING... LEVEL STMNT
  
  
  that will be the order of execution of the trigers?
  How oracle will decide order?
  
  Please give me some documents related to the order of execution of triggers... thnx in advance... !

  PC says:
  Hello.. Obtained response on the order of... but 1 weird point I m feeling that

  in the case of, before insertion... stmnt fire triger level 1 then insert before... line.

  but in the case of after insert... fireing level trigger line then 1 after insertion... stmnt level...

  can you explain this also...

  Why is it so strange.

  You have a statement that you are running.

  The first possible thing is that you are 'before' the statement.

  The next thing that is possible is that the statement is executed for each line.

  So for each line, there is a 'before' to each line and a point "after" each line.

  Once the statement is executed, you are 'after' the statement.

  Thus, it makes sense the statement triggers surrounds education and line triggers are education, and of course 'before' comes before 'after '.

• Do city and State fields on the region required address

  Hello
  For the region of the address when creating a client if we do not enter city, State, and County, we get an error message saying ' Please enter the elements of the desired address: STATE, COUNTY, CITY '. But there is no * to these fields, even if they are needed. I have a requirement to add * in front of the city and the State of the fields and make the field count as not required. I am not able to do it through customization.
  The style of address is a point flex which alludes to HzPuiLocationVO in the region of HzPuiAddressCreateUpdate. I'm not finding a way to update these help please!
  
  This is the area that I'm looking. Please correct me if I'm wrong.
  
  / Oracle/Apps/AR/Hz/Components/Address/WebUI/HzPuiAddressCreateUpdate
  The VO for this element of flex is HzPuiLocationVO
  
  Edited by: user4994352 January 6, 2011 14:48

  If a page has Flex point means fields come either de FACTO or KFF. In your case fileds are Addredd and the city, so a FDF. In the FDF, these fields may be required.

  Add "*" mark you must extend the controller and in processRequest to get the handle to bean filed. And set the required property to true or false depending on the needs.

  Example code:

  OAMessageTextInputBean tempBean = (OAMessageTextInputBean) webBean.findChildRecursive ("beanId");
  tempBean.setRequired ("yes");

  See link for CO extension below:
  http://oracleanil.blogspot.com/2010/09/controller-extension-R12-OAF.html

  For the handful of beans FDF see Anil post in the thread below:
  Requirement DescritiveFlexField

  -Anand

• IN MY FACEBOOK ACCT. HE TELLS MY CITY and STATE in WHICH I am AT VIA FIREFOX, I want TO TURN THIS FEATURE OFF BUT HOW?

  THEREFORE, EVERY TIME THAT I POST SOMETHING, IT SAYS ALL MY POSITION. HOW CAN I DISABLE THIS IN FIREFOX?

  Please do not type in capital LETTERS, it is considered yelling, rude and is difficult to read.

  This message you see is just tell you which computers are connected to your facebook account. You can use it to see if anyone else hacked into your account from another location. https://www.Facebook.com/help/337244676357509/ might help, but it is a matter of Facebook not a firefox one.

• Can't see the details - time and State of charge of battery

  my PC laptop battery charge and discharge ok but the icon in the taskbar can not tell me how cool.
  I left there just an empty battery that says remains unknown.

  Is there something wrong with my battery or is this a driver issue maybe?

  > I have complete my battery and it seems to be now showing the amount of charge in the battery

  Thanks for this second post seems the case is now resolved.

  See you soon