If another problem statement
Hello everyone I have a simple piece of code in my managed Bean (I use Jdeveloper with ADF). public String cb1_action() {
if (i1.getSource()="/b-383010-hamburger_1.jpg")
i1.setSource("/lutrijamanja.gif");
else
ot1.setValue("Hello "+it1.getValue());
i1.setSource("b-383010-hamburger_1.jpg");
return null;
}
What it does is change the value of the text output and the source of the image when I click on an input text (I put a link to order top so it has the property of action). What I want however is to put an if else statement indicating if the source is this, this picture, another change at this other photo.Can I do this? The code up there does not work, but if I take off the otherwise if it works (even if only a change to the source).
Dino2dy wrote:
How your braces are ordered gives me error like missing return statement and unexpected token elsestatements.
Are you absolutely sure? Check that you have copied my code exactly as it is. Double and then check again. And then a third time.
Because I'm willing to bet that my 10 + years of Java experience that my syntax is correct.
Also, do not add parentheses to chance. Programming does not work like that. It's science, not a guessing game.
Tags: Java
Similar Questions
-
How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB. No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.
What printer model Canon...?
kologano wrote:
The printer does not yet appear upward on the tree of USB in the reporting system.
This looks more like a bad USB cable or bad printer.
-
I tried a lot of time to download Lightroom on my MacBookPro without success. I already remove the firewall. Perhaps because of a slow connection to the Lebanon? Or another problem?
Beatricel88978029 you receive specific when errors download Photoshop Lightroom? For more information on how to resolve errors download please see error download and installation of the creative cloud application.
-
Hi, I have another problem, when people visit my site that they could not return to the home page
Hello
Problem is in outline view.
Please follow the steps below and you should be all set.
1. go in the Plan view.
2. right click on the 'HOME' page
3. Select "Menu" > "include the Page containing the hyperlink.
4 save the file and then try to preview.
You should be all set.
Concerning
Vivek
-
Hello
I wonder is there another problem with Edge and Chrome.
I know that something got sorted out but now I have a problem with rectangles (such as the hitboxes) not appearing is not in Chrome.
Anyone know why this is happening?
Hi Robyn,
Looks like a problem with chrome. He is not able to manage the z-index property (although set) in this case. Due to which the user is not able to click on the button that is hidden by another element.
There is a workaround solution you can do on board animate:
You simply select the item named "s_cpl_fa_nav_x2" in the Panel edge ' Elements' animate and drag just below the element named "s_cpl_fa_0_guide_page1" and delete the selected item. This will place the first below the latter, with regard to the stacking order of the UI, and so the click event will work.
I hope this works.
-
Perhaps another problem with Css
I think this is another problem with my CSS is applied because of a problem but I have really no idea.
The site is Alliance of injuries. The problem is with the images in the middle of the page. They are supposed to be in three rows of 3-3-2, but for some reason some they just below the other. When I click on Home.css in the "View Source", it is titled 'Page not found' don't know why.
Anyone who has any ideas I would appreciate it.
Brad
First thing - you must stop using filenames with spaces in them. That can get you into trouble. Use only letters, numbers, dash or underscore - nothing else.
Next thing, the image and CSS links in this page (located at the root of the site) are all (except two) wrong links related document, for example,.
If the page is already at the root of the site, there is no ".." as possible. It is sure to cause you problems. All these links need to be just like this one (which is correct)-(although the Home.CSS file does not appear on the server!)The reason why your images are displayed in a vertical table is that each of them is contained in acontainer with no specified width (was this width specified in the Home.css file does not exist?). So that they appear along a horizontal line, you need to specify the width of the div and float tag he left. -
Hi all
I wonder if you can help me with another problem of MIAW I managed in. I want to create a MIAW custom shape window that runs at the opening of my film director. I am trying to apply a mask on my window using the following code
global Mymovie
on prepareMovie
setting mask = 'Surf '.
myMovie = window () .new ("MIAW_test")
mymovie.fileName = 'MIAW.
Set window("MIAW").appearanceOptions.mask = mas - mas is the bitmask 1 I want to ask my window
horizOffset Set to 360
Set vertOffset to 220
set windowSize to the mymovie drawRect - defines the size of the window to the size of the film
newRect to compensate for the value (windowSize, horizOffset, vertOffset)
Set the rect of mymovie newRect
myMovie.Open () - opens the window
end
The code does not work and I have no idea what is wrong with it. I tried to change several properties of my MIAW, but none of them seem to work. For example, another script I tried to change the type of the window is:
global Mymovie
on prepareMovie
setting mask = 'Surf '.
myMovie = window () .new ("MIAW_test")
mymovie.fileName = 'MIAW.
Window("MIAW").type = #tool
horizOffset Set to 360
Set vertOffset to 220
set windowSize to the mymovie drawRect - defines the size of the window to the size of the film
newRect to compensate for the value (windowSize, horizOffset, vertOffset)
Set the rect of mymovie newRect
myMovie.Open () - opens the window
Yet once the script above does not work. Most of the examples I've tried on the adobe site also is nto working either with the release of Director MX 2004 I use 10.1.
Finally, I would like to ask if you can suggest me any Xtra MIAW for MX 2004 10.1 that will allow me to manipulate the properties of MIAW easily without having to go through the hasle of lingo.
Thank you very much
Try to set the mask and various other appearanceOptions you want in the
MIAW file itself via the tab display of IP model and save it
file. Then, you don't need to put these things using the jargon before
opening the window. -
SPA3102 problem: State PSTN: still rings in the State
We got a new router Linksys SPA3102 VOIP gateway, and we have some problems to operate.
The SPA3102 is properly connected to the local network, but it seems to have problems with the incoming PSTN line.
However, it does not sound when I call the number RTC. On the other hand, State PSTN always says 'Ringing '...
When I restart the SPA3102, then the extension on the pbx sipx she must call rings (without anyone calling the PSTN number).
The status page says something like:
Voltage: 14 (V) loop current: 0.0 registration of (my) State: not recorded the last record to: next record in: last call VoIP number: [email protected] last call number RTC: last calling VoIP: last PSTN Caller:, last RTPC Disconnect reason: CPC Signal RTC activity Timer: 30000 (ms) mapped Port SIP: 5061 Type of call: VoIP Gateway call VoIP State: Idle PSTN State : ringer VoIP: tone RTC:
(Note: the bridge didn't need to register for the sipx-pbx).
While it fires after a reboot of the SPA3102, nothing happens when I dial my mobile PSTN - I hear only ringing on mobile (it says busy or more).
Does anyone have advice?
Andreas
It did not break. The problem was with the cable to connect to the UK British Telecom. I haven't used the gray wire that came with it, but used a telephone cord UK I had to hang out - bad move.
When we talk about Linuxemporium, there where I bought the SPA3102, I was made aware that the cable might be the problem. So I went on the road in a small phone shop to get a US - UK adapter (packaged with the SPA3102 is still an American cable), that didn't fix it. I had another well-known adapter from a retailer of Electronics UK, and that one has solved the problem. The SPA3102 fortunately now works as my PSTN gateway.
I hope this can help others with similar problems.
-
Another problem Windows 7 Ultimate and the message 0xC004C003 error
Sorry to bother you guys with another 0xC004C003 error, but I really don't understand why I get this error.
I recently built myself a new computer and properly installed and activated my copy of Windows 7 Ultimate x 64. I decided to give the system a small upgrade and bought a second SSD and RAID 0 configuration configuration. When it came to the activation of the new construction, I get 0xC004C003 error. Is a reason to upgrade hard drive to get this error?
I wanted to call activation MS but I have a slight problem with that, I speak much Chinese. Let me explain, I moved to China last year and I'm still fighting when people talk fast Chinese, the talker speaks very fast! Now I want to be clear, I was able to activate this key on this machine only 1 months ago. I actually got the imported copy of the United States because here in China I can only buy the Chinese version of the software or fake versions. I can not really afford to import a new copy and to be honest, I don't see why I should, what I have done is changed the configuration of hard disk.
Any help would be most welcome and thank you for reading.
Edit = Diag MGA
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - FFCQH - GRQMF-T6CMM
Windows product key hash: Riue/x/R9j30Z2bIJ7yrakqgfxE =
Windows product ID: 00426-069-5784551-86938
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {629B7398-89B4-4015-974B-6790ABA09049} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7600.win7_gdr.101026 - 1503
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]Other data-->
Office details:{629B7398-89B4-4015-974B-6790ABA09049} 1.9.0027.0 6.1.7600.2.00010100.0.0.001 x 64 *-*-*-*-T6CMM 5 S-1-5-21-917638227-1205074682-757141463 the system manufacturer ,System Product Name American Megatrends Inc. 00426-069-5784551-86938 0904 20121015000000.000000 + 00002BB0600018400FE 0809 0409 China Standard Time(GMT+08:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: a0cde89c-3304-4157-b61c-c8ad785d1fad
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00172-069-578455-00-2057-7600.0000-0722013
Installation ID: 006524963346445051042175499601564022358766839126384761
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: T6CMM
License status: initial grace period
Time remaining: 43080 minute (s) on (29 day (s))
Remaining Windows rearm count: 3
Trust time: 14/03/2013-08:02:53Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:--> HWID data
Current Hash HWID: KAAAAAAAAAABAAEAAQABAAAAAQABAAEAln1GcmxZ6ktYSPrPyowucw ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
ALASKA APIC HAS M I
FACP ALASKA A M I
HPET ALASKA A M I
ALASKA MCFG A M I
FPDT ALASKA A M I
SSDT SataRe SataTabl
SSDT SataRe SataTabl
SSDT SataRe SataTabl
ADELINE ALASKA A M IWindows product ID: 00426-069-5784551-86938
The ID of the product - 069 - indicates a not for resale MSDN account. If you are not the account holder and you bought it in a box at retail, the box and its contents is counterfeit. Request an immediate refund from the seller
For more information, see this:
http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/a2444f34-0AFF-4f29-a8ac-67e28b0c0285
And this:
http://social.Microsoft.com/forums/en-us/genuinewindows7/thread/309bb621-92d5-43d6-98c1-2bb51b35607f
To see how these counterfeits are more, see:
http://www.YouTube.com/watch?v=hzqNNiOM0cs
You can buy a legitimate windows from a legitimate retailer.
-
"synchronize to continue your music subscription" + another problem I think
OK to browse these forums a little I found I need to update my licenses of track in order to use them and possibly get rid of the problem "synchronize to continue your music subscription". The thing is before I followed the advice of another and synchroized the tracks I have with WMP11 and now they are wma I think are supposed to be mp3 (can't remember the type even if I saw him several times). And it seems that the SanDisk Sansa Clip (4GB) is unable to read the wma. So, how can I make these files that I downloaded under the subscription 30 days return from wma to mp3?
The songs downloaded from Rhapsody are audio windows media at 160 Kbps. The Sansa Clip will play wma, mp3, ogg, flac and Audible formats aa. You can also use constant or variable bit rate.
Rhapsody use wma format because the slopes are files DRM wma for music of the subscription. These files are read as long as you subscribe. To unprotected media mp3, the beaches have to buy. On this music rights owners would be angry against Rhapsody if music was distributed for free.
There is also the possibility to download music at 256 kb/s MP3 (you can specify the format and bitrate desired for your purchases of Rhapsody. They have been moved to the format 256 kb/s for purchases, without DRM.
I like to use 160 and 192 kb/s for the CD rips. The files are not too big, and wma sounds good on the go.
Bob
-
Add OS 7.0 VGField under another problem of fields
Hello!
I have very bad problem in OS 7.0.
My layouts from VGField under an other fields (e.g. buttons, labels). OS 6.0, torch, painted screen properly, like I need - VGField makes the scene under fields.
But in OS 7.0, it is little matter in what order VGField add in Manager, he always makes VGField on top, and another field are not visible.
Here are the pictures that are explain my problem more clear:
1st picture, OS 6.0, torch, correct. VGField under buttonField and rectangle painted
9900 photo device, OS 7.0, 2nd. The same source, but not all fields and graphics on VGField
I solved the problem.
CanvasComponent - Manager where I put fields except VGField, in OS 7.0 this Manager is always drawn on top.
-
Another problem with socket: socket does not receive the although it is ready
Hello!
I read a lot of discussion about the casings, but I wasn't able to find a working solution:
I know that RIM has changed many things in this regard in the OS 5.0, but I would like to improve my old 4.7 code so that it works on both BONES.
I have a socket connection between my desktop pc and my BlackBerry storm (and "BOLD"). It works fine on 4.7 well everything what socket sends is mixed to the top when it arrives. That is not the real problem, but if someone has a tip for me - would be great!
For this I use wap2.
5.0 it sends all clear (large), but my code reception does not work. He knows what data happens by checking. the InputReaderStream ready(). I think it works, it's always a good time. Then, I'm reading by. read(). Still, it blocks and waits while there is something. But it does start to read something (!) until the connection is closed by the other side (my desktop pc).
Can you give me a clue what I'm doing wrong?
This only happens on the device, not in the Simulator!
That's what I tried:
-with the help of a DataInputStream (I wasn't able to find a difference)
-using another overload of. read()
P.S. Get rid of InputStreamReader and use the InputStream.read (void) method directly to read a byte at a time.
-
I've also attached the full code at the bottom of this message in case this is useful, but the summary
I have a plugin of lua (rsjaffe MIDI2LR) who receives an application via a LrSocket MIDI messages. Everything works, but I tried to add copy/paste develop settings without success.
In the following code, copy settings is:
function copySettings()
local photo = LrApplication.activeCatalog (:getTargetPhoto())
parameters = photo: getDevelopSettings()
end
and paste the settings:
function pasteSettings()
applySettings (settings)
end
function applySettings (set) - still experimental
If LrApplicationView.getCurrentModuleName () ~ = 'develop' then
LrApplicationView.switchToModule ('develop')
end
for x, v to peers (set)
-SERVER: send (string.format ("%s % d\n", x, develop_lerp_to_midi (v) "))
-PARAM_OBSERVER [x] = v
LrDevelopController.setValue (x, v)
end
end
Functions called, but nothing happens to the picture of the target. I was also unable to attach a debugger (tried ZeroBrane studio as described in debugging Adobe Lightroom plugins with ZeroBrane Studio - ZeroBrane , but can not get Lightroom to load mobdebug.lrmodule.)
Can someone point out where I'm wrong?
Thank you.
require "strict.lua" - catch some incorrect variable names
require "Develop_Params.lua" - global table to develop params, we must observe
local LrApplication = import "LrApplication".
local LrApplicationView = import "LrApplicationView".
local LrDevelopController = import "LrDevelopController".
local LrFunctionContext = import "LrFunctionContext".
local LrSelection = import "LrSelection".
local LrShell = import "LrShell".
local LrSocket = import "LrSocket".
local LrTasks = import "LrTasks".
local LrUndo = import "LrUndo".
-File-local Consts
local RECEIVE_PORT = 58763
local SEND_PORT = 58764
local PICKUP_THRESHOLD = 4
-File-local vars
Local CopyUUID
local settings
local LAST_PARAM = "
local PARAM_OBSERVER = {}
local PICKUP_ENABLED = true
Local SERVER = {}
-File-local work statements, advance declared to allow him to be in the scope of all calls.
-When you define previously stated function, DO NOT USE local KEYWORD once again, it will define another local function.
-These statement are intended to overcome certain Lua gotcha.
local applySettings
local copySettings
local develop_lerp_to_midi
local midi_lerp_to_develop
local pasteSettings
local processMessage
local sendChangedParams
local startServer
local updateParam
LOCAL = {}
['DecrementLastDevelopParameter'] is function () LrDevelopController.decrement (LAST_PARAM) end.
["VirtualCopy"] = function () LrApplication.activeCatalog ():createVirtualCopies() end,
['ToggleScreenTwo'] = LrApplicationView.toggleSecondaryDisplay,
['CopySettings'] = copySettings,
['PasteSettings'] = pasteSettings,
}
local TOOL_ALIASES = {}
["Magnifying glass"] = "magnifying glass."
["CropOverlay"] = "crop."
["SpotRemoval"] = "dust."
["Red eye"] = "red eye."
["GraduatedFilter"] = "degraded."
["RadialFilter"] = "circularGradient."
["AdjustmentBrush"] = "localized,"
}
local SETTINGS = {}
["Pick-up"] = function (enabled) PICKUP_ENABLED = (activated == 1) end.
}
function copySettings()
local photo = LrApplication.activeCatalog (:getTargetPhoto())
parameters = photo: getDevelopSettings()
end
function pasteSettings()
applySettings (settings)
end
function midi_lerp_to_develop (param, midi_value)
-map range from midday to develop the range of parameter
local min, max = LrDevelopController.getRange (param)
-If (param == 'Température') then
-min = 3000
-max = 9000
-end
local result = midi_value/127 * (max - min) + min
Returns the result
end
function develop_lerp_to_midi (param)
-map develop parameter range range midi
local min, max = LrDevelopController.getRange (param)
-If (param == 'Température') then
-min = 3000
-max = 9000
-end
local result = (LrDevelopController.getValue (param) - min) /(max-min) * 127
Returns the result
end
function updateParam (param, midi_value)
-This function performs a "Pick-up" check type
-in other words, it will ensure the setting is close to develop
-in what order entered value is before updating
If LrApplicationView.getCurrentModuleName () ~ = 'develop' then
LrApplicationView.switchToModule ('develop')
end
If ((not PICKUP_ENABLED) or (math.abs (midi_value - develop_lerp_to_midi (param)) < = PICKUP_THRESHOLD)) then
PARAM_OBSERVER [param] = midi_lerp_to_develop (param, midi_value)
LrDevelopController.setValue (param, midi_lerp_to_develop (param, midi_value))
LAST_PARAM = param
end
end
function applySettings (set) - still experimental
If LrApplicationView.getCurrentModuleName () ~ = 'develop' then
LrApplicationView.switchToModule ('develop')
end
for x, v to peers (set)
-SERVER: send (string.format ("%s % d\n", x, develop_lerp_to_midi (v) "))
-PARAM_OBSERVER [x] = v
LrDevelopController.setValue (x, v)
end
end
-message processor
function processMessage (message)
If (message) type == 'string' then
-messages are in the format 'param value '.
local _ param, value = string.find (message, '(%S+) %s(%d+)')
If (ACTIONS [param] ~ = nil)-perform an action time
If (ToNumber (value) == 127) then ACTIONS [param] (end)
Else if (param:Find('Reset') == 1) then - reset other than those explicitly encoded in the ACTION items table
If (ToNumber (value) == 127) then LrDevelopController.resetToDefault (param end:sub(6))
Else if (param:Find('SwToM') == 1) then - perform a switch to the module
If (ToNumber (value) == 127) then LrApplicationView.switchToModule (param end:sub(6))
Else if (param:Find('ShoVw') == 1) then - change the display mode of the application
If (ToNumber (value) == 127) then LrApplicationView.showView (param end:sub(6))
Else if (param:Find('ShoScndVw') == 1) then - change the display mode of the application
If (ToNumber (value) == 127) then LrApplicationView.showSecondaryView (param end:sub(10))
ElseIf (TOOL_ALIASES [param] ~ = nil) then - switch to the desired tool
If (ToNumber (value) == 127) then
If (LrDevelopController.getSelectedTool () == TOOL_ALIASES [param]) then - switch between the tool/Magnifier
LrDevelopController.selectTool ('magnifying glass')
on the other
LrDevelopController.selectTool (TOOL_ALIASES [param])
end
end
ElseIf (PARAMETERS [param] ~ = nil) then
Settings [param] (ToNumber (value))
else - otherwise update a development parameter
updateParam (param, tonumber (value))
end
end
end
-Send settings changed to MIDI2LR
function sendChangedParams (Observer)
for param in ipairs (DEVELOP_PARAMS), __________
If (Observer [param] ~ = LrDevelopController.getValue (param)) then
SERVER: send (string.format ("%s % d\n", param, develop_lerp_to_midi (param) "))
Observer [param] = LrDevelopController.getValue (param)
LAST_PARAM = param
end
end
end
function startServer (context)
SERVER = {LrSocket.bind}
functionContext = context,
plugin = _PLUGIN,
port = SEND_PORT,
mode = "send."
onClosed = function (socket) - this callback seems never called...
-MIDI2LR closed the connection, allow reconnection
-socket: reconnect()
end,
onError = function (socket, err)
Socket: reconnect()
end,
}
end
-Main task
LrTasks.startAsyncTask (function()
LrFunctionContext.callWithContext ("socket_remote", function (context)
LrDevelopController.revealAdjustedControls (true) - parameter reveal touched in the process of Panel
-Add an observer to develop changes to the param
LrDevelopController.addAdjustmentChangeObserver (context, PARAM_OBSERVER, sendChangedParams)
local client = {LrSocket.bind}
functionContext = context,
plugin = _PLUGIN,
port = RECEIVE_PORT,
mode = "receive."
onMessage = function (socket, message)
processMessage (message)
end,
onClosed = function (socket)
-MIDI2LR closed the connection, allow reconnection
Socket: reconnect()
-call SERVER: reconnect causes LR to hang for some reason any...
SERVER: close()
startServer (context)
end,
onError = function (socket, err)
If err is 'timeout' then - reconnect if expired
Socket: reconnect()
end
end
}
startServer (context)
While true
LrTasks.sleep (1/2)
end
client: close()
SERVER: close()
end)
end)
LrTasks.startAsyncTask (function()
If (WIN_ENV) then
LrShell.openFilesInApp ({_PLUGIN.path..' / Info.lua'},.. _PLUGIN.path' / MIDI2LR.exe')
on the other
LrShell.openFilesInApp ({_PLUGIN.path..' / Info.lua'},.. _PLUGIN.path' / MIDI2LR.app')-on Mac, it seems that the argument of files must include an existing file
end
end)
This may be a correct way, it seems to work
local settings
function copySettings()
LrTasks.startAsyncTask (function)
local photo = LrApplication.activeCatalog (:getTargetPhoto())
parameters = photo: getDevelopSettings()
end)
end
function pasteSettings()
If the parameters ~ = nil then
LrTasks.startAsyncTask (function)
Catalog = LrApplication.activeCatalog)
Catalog: withWriteAccessDo ('pasteSettings', function()
local photo = catalogue: getTargetPhoto()
Photo: applyDevelopSettings (Settings)
end)
end)
end
end
-
I put this level of play while the player can replay the level, but there is a penalty of 30 points each time that the player replay the level. Also, I put the replay to forget the points earned at that level. Somehow the two statements come into conflict with one another, and each time the player to replay the level negative multiple points. for example on the first reading, it would penalise the player with 30 points as it should be, but on the second try it would be penalize the player with -60 points and on the third 90 points. each formula works very well on its own, but not when I put them together. I tried everything and can not understand. Help, please
Here's the script:
playLevelAgain.addEventListener (MouseEvent.CLICK, doLevelAgain5);
function doLevelAgain5(event: MouseEvent): void {}
-30 penalty points to replay the level
score = 30;
points for the initial level of the resting point.
score = ScoreScene6;
gotoAndPlay (1);
The two lines where you set the note do not sense when you put them together, especially if the second is supposed to be reset (not 'rest' I guess). What is the value of ScoreScene6? Try to use the function trace to see what is the value of the partition through this treatment...
trace ("1:", note);
-30 penalty points to replay the level
score = 30;
trace ("2:", note);
points for the initial level of the resting point.
score = ScoreScene6;
trace ("3:", note);
-
I'm working on a very simple form, I a (2 pages long) article need to be repeated. I did before repeating subforms on several other forms, but it keeps making the maximum number of instances of the subform sank little matter what I try to get to only show as the unique initial instance.
The form is a subform past which has 6 positioned subforms and an additional form sank (sectionII) who needs to repeat.
I need to display a single instance when the form is opened. I have a simple button click event to a script to add another instance. The structure is below. Not sure where I'm wrong on this. Any suggestions will be greatly appreciated.
AW darn! Figured it out.
For anyone with a similar problem... don't forget to check the "DUH".
Form properties failed 7.0 and higher. Saw a lot of warnings in the report palette! Always forget it's there.
Changed the form to 8.0 and above and voila... fixed. !
It is sometimes useful to put things away and go have a beer.
Maybe you are looking for
-
iMac to start speaker crackles
HelloI have an imac 21.5 "mid 2011 with OS 10.11.3is a few months to start the iMac, the speakers make a Crackle noise. It seems like an electrical interference independent of the volume of the speaker. I'd like to understand what depends on it and h
-
When I ran the disk recovery software, I keep getting error screens, they all started "a problem has been detected and windows has shut down to prevent damage to your system. I re-ran about 10 times about 5 different error messages. None of the pr
-
ORIGINAL TITLE: How can I fix this please? I have an older version of Windows XP (Home edition) Version 5.1. Trying to get updated with service packs, etc., I get the pop up message in the box below. How can I fix the problem? 'The procedure entry
-
my inspiron 1501 sounds as it burns a cd/dvd, but the disc comes out blank
I can play dvd CDs, but all of a sudden I cannot burn photos or music. Looks like it works, but when the disc appears it seems empty and it shows nothing when I put it in the computer.
-
Extracts &; user defined Variables
After ~ 5 years not working not with any what HAT, I started a new post on 28/03/2016 and put back the trial HR 2015 a spin. I'm very excited by what I see and were able to do so far.I have 3 'entities' to write and I created 3 pages, one page per en