If I develop a web page using control +, how can I make sure that the next page, I'll on that site will be in the extended mode, and the 1st page will always be extended mode when I get back to him? This is automatic in the Chrome browser.

Similar Questions

• I just upgraded to the Plan complete creative Cloud, but I also had a plan of individual photo, the upgrade to the PAC will cancel the individual level, or what I have to cancel and how can I make sure that I do not get penalized for cancellation?

  I just upgraded to the Plan complete creative Cloud, but I also had a plan of individual photo, the upgrade to the PAC will cancel the individual level, or what I have to cancel and how can I make sure that I do not get penalized for cancellation?

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  First of all, such that added to your message of origin by a Mod, please do not post the same question twice

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <==> NOTE DAYS AND TIME

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How can I make sure that my kids use no other direct email addresses?

  Summary of the issue
  Other issues of Windows Live family safety

  What version of Windows Live Family Safety do you use?
  Version 2011 (15.4.3538.513)
  Choose your operating system version:
  Windows 7

  Additional details
  My son can connect to her fine Hotmail account, but it can also connect using other Hotmail or Live email addresses. How can I make sure that it can only connect to Hotmail with their family safety account?

  Hi iclay,.

  I have reproduced your concern in our end and I discovered, add other e-mail accounts that he can use and accounts already created by your son in Windows Live family safety and block the Windows Live Hotmail registration page to prevent it from creating an another workaround e-mail accounts.

  To add e-mail as child account in Windows Live Family Safety:

  1. connect your account on http://fss.live.com.
  2. under Family summary, click on Add a new child.
  3. log on to the account of the child

  After that, the child's account appears as a member of the family under the new parent account.

  To block the registration page:

  1. on any computer, connect on the parent account to the safety of the family home page
  2. click Edit settings under the name of your son, and then click Web filtering lists.
  3. enter http://signup.live.com in the box and click on block.
  4. click on Save.

  Please inform us if you have any questions or concerns, we will help you gladly with him.

  Thank you

  Christian C.

• How can I make sure that I am not charged for ALL the stuff of cloud?  And please explain to this OLD duffer... How to get the clouds out!

  How do I completely get out of theClouds AND make sure that I'm not going to be charged?

  Hello

  The Adobe Id on the forums has no assets CC membership/registration under him.

  You are not charged for any subscription of cloud under this Adobe ID

  Kind regards

  Sheena

• I have win xp SP3 installed on my PC. I use several external hard drives to store video files. How can I make sure that they maintain the same drive letter, every time that I connect them?

  All these hard disks are connected via the USB ports, but not all of them are connected at the same time. I use Adobe first Elements to edit videos, & if I open an adobe project it is expected that the video files will always be under the same drive letter.

  Have you tried to assign drive letters using disk management?
  Mount your drive, then

  Start-> Run-> "diskmgmt.msc".

  Find your player in the list, right-click on it and select "change drive letter and paths...". »

  HTH,
  JW

• How can I make sure that my models not resident on a host which can enter mode standby when the DPM is activated?

  I have a host in my cluster I have designated as the place where I would like my vCenter server to reside.  I created a rule of affinity for that to happen.  I would like to have my models are on the same host. However, I don't see a way to do this with affinity rules as templates are not displayed in the list of virtual machines that can be chosen to create a group.  I guess that ther eis a way to do it.

  To ensure that guests with templates is not extinguished by DPM, you must override the DPM settings for this host setting DPM to disabled.

  André

• I am not recognized as program administrator of Windows wireless? How can I make sure that the system recognizes me as an administrator on all programs so that I can fix and to use them properly.

  The Windows wireless program does not work and diagnostic tests tells me to contact the administrator. I am the administrator, but the system I cannot use diagnostic tests or run the recovery. What should I do?

  Hi Redemption_Abounds,

  I suggest that you check if you can access msconfig from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I make sure that only the Web site that sets the cookie can read it?

  I want some websites to be able to store cookies and use them, but I don't want other sites to use these same cookies.
  I know how enable/allow per session/block and I have same cookie manage extensions.
  What I can't find anywhere is information on who can read the cookies once they are defined.

  Only website (server or domain) that sets a cookie can read this cookie, but it can be an iframe embedded with another domain that defines the so called third-party cookies.

  You can disable third-party cookies.

  • https://support.Mozilla.org/KB/disabling+third+party+cookies

• How can I make sure that there are no other programs running when I try to install another program?

  I keep trying to install a program, and it will not be installed.  It is said that there are other programs that run in the background.

  The best way to see what's running is press ctrl + alt + delete at the same time and open the Task Manager. Then under the applications tabs, it will show you all the programs that are running. You can click and close the program from here. If it is empty, then the problem is most likely a program process that is running. On the tabs in process, you can find the process that is running and the origin of the problem. You can click on the program here and so close. I hope this helps. If this isn't the case, you could let us know what kind of program you want to install.

• Hi, I bought a windows xp disk Professional Microsoft a few years ago but never used it how can I cd key for the disc

  Hi, I bought a windows xp disk Professional Microsoft a few years ago but never used it how can I cd key for the disc

  If you bought a copy the retail of Windows key should be included in the box.

  How to get a replacement product key

  Retail Windows:
  If you have lost a product key for the software you purchased separately from your computer, or if your product key does not work, call Microsoft. To locate the phone number, visit the following Microsoft Web site: http://support.microsoft.com/default.aspx?scid=fh; CNTACTMS

  A fee may apply for lost keys.

• I installed Windows 7 64 bit and then some programs will not install the 64 - bit while telling me that I have a 32 bit OS. How can I make sure I have load a 64-bit version only when there is a choice?

  I have create a new PC and installed Windows & Pro 64-bit. While some offer programs install both 32-bit and 64-bit as a single installation and the installation of the program checks it should install. A few programs installed 32-bit when I said to use the 64-bit. I received a message that I had a 32 bit OS and that it could not install the 64-bit version. How can I ensure that the 64-bit version is always installed when it is available. I have a program that I need it's 32-bit however.

  I also installed Office 2010 and want to know how to check if it installed 32-bit or 64-bit.
  All this is because I'm about to build a new PC for my wife and want to avoid these problems right at the front with it.
  Thank you
  Doug

  If you buy a commercial version of win7 you are provided with the installation dvd of bit versions and a unique activation key. You cannot install both versions.

  Most of the programs will install without problem in a 64-bit version of victory, there is very little that will not be installed on Windows 64-bit.

  You install programs as usual, you don't need to change any settings or install to anywhere other than their default locations. -C' IE you do not manually select the x 86 folder or any other folder.

  If the program you are installing has the ability to install a specific version of bit, and it does not work, then the problem is that options program installers, you must contact the program support

  A retail version of Office 2010 also comes with two versions of ILO.

  Having a 64-bit version of victory does NOT mean that you need to install 64-bit Office, in fact MS recommends that stick you with 32-bit Office (reason being compatibility with various plug0ins Office)

  And of course the 32-bit version of win only supports 4 GB of memory

• When you print documents from several web pages (HP) (Yahoo Finance), pages 2 to the front are different font than page 1. How can I make them all the same as page 1?

  I tried different configurations of Assembly page and different configurations of printer without result. Basically, the formatting on page 1 is not beyond this page when printing. It happens on all websites, so is not limited to Yahoo Finance.

  I've also updated for Firefox 7.0.1 and the situation persists.

  When you use the Safari browser, the problem occurs.

  I'm glad to hear it!

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.

• How can I reset so that it will ask me if I really want to close multiple tabs?

  He used to ask when I tried to close multiple tabs and let me know how many tablets I had opened, but now it's just closed its doors. How can I get the dos prompt?

  If you set to automatically restore the previous and then you would get a confirmation dialog box.
  Only with one of the other two choices you get the dialog box.

• If you use the direct link to go from first pro to speedgrade can I make sure that he stays in 2014 releases

  I have just completed a project in first pro cc 2014 I want using the direct link in speedgrade grade but want to keep within the release of 2014.  Can I

  set or it will automatically launch the speedgrade 2015 version since it is also installed on my system?

  Thank you in advance!

  That is great news!  Thank you so much for getting back to me quickly!