If I do are on back to the PS from LR, use original edit, my LR are not displayed.  Has anyone seen this?

Similar Questions

• Has anyone seen this error VAMI?  What are the causes?

  He's a service launched at startup, recorded in the var

  Cannot get the vamitty instance: unknown parameter TTY

  Google found nothing for me.

  Thank you

  CJ

  Hello

  Yes, that seems correct.

  TTY should be in the working environment of vamitty when it is started, but the error you mentioned seems to indicate the opposite.

  There is nothing else that it must call outside the initctl call as much as I know.

• Since the installation of the last Photoshop CC updated two days ago, Auto Blend to focus stacking is to select all pixels of the background layer instead of those of the better development of each layer. Also has anyone seen this problem?

  I installed the latest update of Photoshop CC on my Macbook Pro two days ago, and now when I try to focus stacking by opening several photos and make Auto Align and Auto mix, mixture selects the entire background layer instead of select areas of the development of each layer. I tried again on a series of images where it worked a week ago, and the problem occurs. I have Photoshop on a Windows 8 machine and did not apply this last update and it works fine. If anyone else has experienced this?

  And we now have the new version!  2014.2 is out and it's fine to focus stacking and Photomerge.

  -Christmas

• Has anyone seen this behavior from the trim of your comments?

  

  Any time that do a delete operation, in this case a slip edit, I get these feedback cropped trim panels.  It makes their use for feedback almost impossible.

  I tried the resizing windows, turning from the control screen.  Not sure what is the cause.

  According to your description here, it seems that it is a known problem. The main reason that you experience this issue, it's that you have climbed the material of your sequence. As you note, when using clips of 1920 x 1080 in a sequence the same dimension, the bug does not occur.

  I'll add a note to the known, problem report to reflect your supplementary report.

  -Andy T.

  -First Pro Team

• Network paths are not displayed when you create a new reservation, but due to storage

  I want to create a new reserve of vsphere with a new endpoint vCenter that I just added (our 2nd point endpoint vCenter).  Storage of the paths appear fine in the "resources" tab, but on the tab network shows the network paths.  I have validated that there are 3 groups of ports distributed that appear in vSphere client to web, so I know they exist.

  Has anyone seen this behavior?

  Hey Sean!

  Happy new year!!  My question ended having to do with storage cluster and DTS not activated.  Of the 103 times I've torn down and rebuilt, I recommend again. When things are going well, the installation will really well in all areas.  Safe yourself a bit of time and hassle and start again

  Steve

• the thumbnails are not displayed?

  My thumbnails are not displayed in recent times.  This isn't the case for each of them only.

  It goes to the old thumbnails years ago and more recently.

  

  Select one and turn your back then turn - this should fix it - then you can do it for large groups of thumbnails at a time

  LN

• I upgraded my Vista Home premium to windows 7 ultimate, shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created until the flash drive is reinserted

  during the upgradation he automatically took backup to an external flash drive, now every time I have to run has previously program I have to insert this flash drive.
  also all the shortcuts on the desktop are not displayed, and can be created, or any folder cannot be created so that the flash disk is reinserted

  Hi subhshy001,

  Welcome to the Microsoft Windows answers Forum community!

  Try this if you do not have

  Windows Explorer to create the folders and shortcuts in your document folder, drag and drop them on your desktop.

  If you have completed the steps and was not even useful,

  Follow these steps:

  Try to create a shortcut and sending it on the desktop.

  (1) open: Start Menu ,.
  (2) right-click: Internet Explorer icon .
  (3) select: send to > desktop (create shortcut).

  There should be a shortcut on the desktop .

  Make sure that the "show desktop icon" has a check against it

  OR

  Just click on the empty part of the desktop, choose new > then select the folder to create. Right click on this folder , select Rename it.

  If the steps above do not work then:

  You can scan your computer for malware.

  You can download, install and update anti-malware free of your favorite search engine and find malware.
  
  Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the scan comes back clean, so I recommend doing a System File Checker too l to analyze your OS system files.

  To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. open an elevated command prompt . To do this, click Start , click principally made programs , Accessories , right-click guest , and then click run as administrator .  If you are prompted for an administrator password or a confirmation, type the password, or click allow .
  2. type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. This analysis do take some time to complete.

  Hope this information helped!

  Thank you, and in what concerns:

  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Recently opened progams are not displayed on the start menu

  Original title: my most recently opened PROGRAMS are not displayed n the Start Menu-Vista ultimate__

  Hello, Im under Vista Ultimate SP2 [32 bit] and what ever updates etc, there is so much current im.  Suddenly the list on the left side of the Start Menu [under the waiting list] shows all the programs that have been recently opened/used. It allows to view, obviously Ive done something along the way but don't can't seem to retrace my steps back far enough. Clicks to memorize and display properties are all not verified so no problem there.  Can someone please help with this annoying problem. May thanks, has soon.

  Type regedit in the start search. Access
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  and delete
  NoStartMenuMFUprogramsList
   
  --
  ..
  --
  "kenhankanen" wrote in message news: c0fac7b4-ec95-4c3b-8345-eb202323410c...
  > Bindu thanks for your reply, but I had tried these steps much earlier on
  > and are the most obvious that can be made. I was expecting something
  > more technical, if necessary, as perhaps a reg key has been changed and can
  > be reset but I am sure that is it might have been, or if in fact it is
  > the cause. I'm sure its base [other Quen exhibited obvious steps]
  [> above], but can't seem to find it in one of the preferences or
  > configuration in the control panel settings. other than furthere ideas
  > create a new user account?
  >
  > Thanks again for your time and help.
  >
   
   

• What should I do so that I can make a routine (monthly) BACK to the top without having to allow a program that is not properly validated?

  Since July of this year, when I try to back up my computer to HP Envy 17 laptop I get a pop-up window asking if I want to allow the following program to make changes to my computer.  The program is: Microsoft Windows Backup/Windows Hardware Driver verification / valid from 07/12/2009 to 03/07/2011.  Because the validation is obviously outdated, I consider the program run out of appropriate verification, but I can't back up my computer without the program.

  Hewlett-Packard said the problem probably occurs because the computer was missing an update of windows.  Updates happen automatically without my intervention.  I bought the new computer, directly from HP in the month of August, 2011 (after the date of validation of program pop up) with Windows 7 Ultimate installed and had no problem backup of my files to a CD until July of this year.  I believe that the problem may be the result of a rather than a missed update windows update.  What should I do so that I can make a routine (monthly) BACK to the top without having to allow a program that is not properly validated?

  Since July of this year, when I try to back up my computer to HP Envy 17 laptop I get a pop-up window asking if I want to allow the following program to make changes to my computer... [Posted Sept 27-12]

  At this point, the problem of slower Internet connection and loading is probably resolved.  I wanted to try the simpler remedy without doing unnecessary downloads.  Fortunately, there is a Windows update that created a restore point the day before the problem occurred.  I restored the system to this date, and the problem disappeared... [Posted 03 Oct-12]

  Sorry, but I can't say what the problem is (or was) or when he started - especially since the moderator community Smittychat [or another Mod?] decided to merge your two threads. Maybe it can help you?

  I can tell you that v11.3.300.268 Java Version 6 update 32 and Flash Player are very badly outdated & subject to thousands of security vulnerabilities .

  Get Java Version 7 Update 7 installed (or higher) & all previous versions (for example, v1.6.0_32) removed as soon as POSSIBLE!  Follow the instructions here-online http://aumha.net/viewtopic.php?f=26&t=46263

  When finished, remove your Java cache by http://www.java.com/en/download/help/plugin_cache.xml

  Download Flash Player v11.4.402.278 installed as soon as POSSIBLE, also!  See this page-online http://aumha.net/viewtopic.php?f=26&t=46252

  Good luck!

• Windows cannot access and the bios options are not displayed in the bios options

  Windows cannot access the bios options are not displayed in the bios options, I don't know what the problem is. I've used the laptop and turned on and when I start windows again, there is a usb modem in the usb port (it contains the setup of windows, ubuntu, mac files). That's all that's happened with me, and I get the error in the photos. I have windows 8 x 64 and fujitsu lh532 core i5

  

  Hello

  Thanks for posting your query in Microsoft Community.

  • Why are you trying to access BIOS?

  In case you have problems with Windows 8, you can come back with more information, and we will be happy to answer your query.

  To access BIOS, we recommend that you contact your computer manufacturer help you make changes in the BIOS.

  Warning: Change BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Icons are not displayed properly in Gmail when the zoom level is between 150 and 200%

  Icons in Gmail will not correctly displayed in Firefox at all zoom levels. The problem does not occur in less than 150% zoom levels or levels of zoom to 200% or more. Levels of zoom between (150%) correct icons are not displayed until the mouse passes on their location.

  The attached pictures show screen shots to 140% (OK), 150% (problems shown, before moving the mouse), 150% (problems shown, after moving the mouse), 190% (problems) and 200% (now OK again)

  The problem was not resolved by disabling extensions, go to mode without failure or update Firefox.

  Firefox and extensions/plugins are all fully patched.

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• The documents are not displayed

  My items in the Documents are not displayed.

  I recently downloaded OS X El Capitan.   The problem might be related to that?

  Thank you very much.

  Have you tried a Spotlight search for the name of one of these files?

• I downloaded the update to FF twice, but the web sites are not displayed despite my being on the page. Also restarted.

  Web pages (I tried different web sites) are not displayed, but the line at the bottom of the screen indicates that I am indeed on the web site. Previously, before, I downloaded the version nerw of FF, display web pages seemed slow unless I'm assured by cursor was "large" of the space on the screen that displays the web page.

  I checked with another browser and websites I went to work and are displayed in the browser.

  
  

• Icons, twitter bolts on the site are not displayed?

  According to the bounding, icons pictures, twitter bolts on the site are not displayed?
  Help please?

  Many sites now use downloadable fonts to create their icons instead of the traditional image files. So, there are some Firefox settings that might be a factor, as well as the NoScript extension, if you use this (blocked objects).

  (1) in the dialog box fonts Advanced, unchecking the checkbox which allows the site to use its own choice of fonts. To check that:

  "3-bar" menu button (or tools) > Options > content > button "Advanced".

  Here you must "allow pages to choose their own fonts.

  (2) on the deactivation of fonts downloaded in: config. It's less likely, or you remember probably not, but here's how to check on it.

  • In a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
  • In the search box at the top of the list, type or paste the gfx and make a pause so that the list is filtered
  • If gfx.downloadable_fonts.enabled preference is bold and user, set false, double-click it to return it true.

  This seems useful.

• The browser Safari windows:-export Japanese character of file name are not displayed

  I am facing a problem on windows 7 safari browser.

  When I export the pdf file, the Japanese characters in the file name are not displayed.

  Hello

  Apple did not support Safari for Windows for years is not surprising that you have problems.

  Use Chrome or Firefox.