If I restore it removes all programs from that computer came?
My computer is running too slow, as I have only 2 GB left of 110 GB on my hard drive, so I want to delete everything on the computer (after the transfer of files on an external hard drive), is there a way to do this without removing Microsoft Word etc. and other programs like iTunes, or will all be deleted and I have to reinstall everything one by one?
Hello
all programs that you have installed will be removed when you perform a restore to the factory settings
the only programs you will have after reinstallation using the manufacturer's recovery disc will be programs on your machine originally supplied with
the programs that you have installed since you bought your machine, you will need to reinstall again
__________________________________________________________________________
read this to see what the cause of the problem of space on your hard drive, too
see if this program helps you to determine what is take up space
http://www.Jam-software.com/treesize_personal/
by default system restore will have up to 15% of the capacity of the hard disk
you would like to reduce this amount
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.vista4beginners.com/system-restore-space-used
also use disk cleanup
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup
The other Options tab is available when you choose to clean up the files of all users on the computer. This tab includes two additional ways to free disk space even more:
Programs and features. Open programs and features in Control Panel, where you can uninstall programs you no longer use. The column size in programs and features shows how much disk space each program uses.
System Restore and shadow copies. Guests delete you all but the most recent restore point on the disc.
and read these information from microsoft on windows optimization
http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
_______________________________________________________________________
and Malware scan:
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Tags: Windows
Similar Questions
-
How to remove all information from the computer so I can sell it?
How to remove all information from the computer so I can sell it?
Hello
You will want to format the hard disk:
1. you can use DBAN - http://www.dban.org/
or
2. you can follow this tutorial to clean install up to the step where you format the disk, in which you would then STOP (because you just want to get rid of the files on the hard drive, do not install Windows) - http://www.sevenforums.com/tutorials/1649-clean-install-windows-7-a.html
Kind regards
Patrick
-
What I my old creavite t cs5.5 dleete or keep it since I got the new cc? Looks like he still wants to open in the former programs.
You may change the default application assigned to open files to point to the new. How you do that depends on what operating system you have. If you use Google, you should be able to know how to change the default programs for different files.
-
After removing a virus from my computer last year, I struggle to access most programs such as media player and other things. When I try to open something, I get a popup asking me to choose the program I want to use to open this file. For some programs, this file is actually listed. But for the most part, they did not. For example, Nero express is what I use to copy CDs or DVDs. I have to go into a safe mode to use it as well as using programs to run virus checks. I was told that the virus had somehow corrupted or affected my file extensions. I almost had cheated using powerful PC Max but did some research beforehand. Any suggestions?
original title: File Extension problemsIf you need to go to Safe Mode in order to use certain applications (for example, Nero Express), particularly antivirus scans, you most likely have not successfully removed all malware from your computer.
How did you remove the virus from your computer last year?
You then install an antivirus application? Which one? Are you still using it? What's his current subscription? Its subscription has already been authorized expiration?
What version of Windows, including service pack, do you use?
What other anti-malware software do you currently use?
Have you analysed recently with the following free tools? Otherwise, download, install, update and run scans (not simultaneously) with each of them:
MalwareBytes AntiMalware
SUPERAntiSpyware
Like many also restore file associations.- Right-click on a file and select open with > choose program.
- Look in the lists of programs (split in 'Recommend programs' and 'Other programs')
- If you can't find the application you want to use to open this type of file, click on the button "Browse".
- The "Program Files" folder should open (if it isn't, go to C:\Program Files
- Find the program you want to use. If you are looking in C:\Program Files\
------, you determine which file is the actual program. You should be able to tell from the icon. If not, see note below) - Select the program (the exe file or the name of the program in one of these lists) and check the box "always use the program selected to open this type of file"
- Click OK
- Repeat the above for each type of different file according to the needs
Note: If you need to determine the EXE file for an application, just right-click on the shortcut you use to start the program, and then select Properties. Click on the tab "shortcut". The 'Target' box contains the path name to go to the executable (EXE file) for the program. For example, the executable file for Firefox is "C:\Program Files\Mozilla Firefox\firefox.exe"
There are a few exceptions, including but not limited to Microsoft applications, which use a more obscure reference to the target. Word, for example, indicates the 'target' as a 'Microsoft Office' gray of no matter the version. The real exe for Word is 'C:\Program Files\Microsoft Office\OFFICEnn\WinWord.exe' where the nn refers to the version of Word that you have (Word XP/2002 is 10, Word 2003 is 11, Word 2007 is 12, Word 2010 is 14).
If you need assistance with a shortcut that does not directly show the name of path, ask.
-
want to remove some programs from my "adding and deleting' on the control panel
I am wanting to remove some programs from my "adding and deleting' on the control panel. I have several that I don't know if they are necessary in order to do not want to delete them until I have found. Example: Microsoft.NET framework 2.0 service pack 2, if I said the same thing with the exception of program 3.0 can remove either one or both or what? Redistributible MS Visual C ++ 2005 and also have 2008 and 2110. Platform Installer 3.0, WCF RIA Services V1.0 for visual studio 2010. I don't even remember downloading all of this stuff, but don't know if it has a meaning to my computer or not. Y at - it somewhere I can look to find such information? Don't like silly things like this, but would rather ask that screw up something. Thank you
Hello
- What version of Windows are you using?
I suggest you to see these steps:
a. type msinfo32 in the start search box and press on Enter.
b. a pop-up window, press CTLR + A, then CTLR + C and after that information here.
c. then we can suggest you what program needs to be uninstalled.
Response with more information
-
To remove all music from my iphone
I am eager to erase all my music on my Iphone 6. I tried to drag the songs and remove them myself, but when I backup my phone to my computer, they show once again. Any help would be greatly appreciated...
Hello
To remove all music from your iPhone, go to: settings > general > storage & use iCloud > in the storage section, tap on manage storage > music > Edit (top right corner) > delete all the songs.
To avoid that music is synchronized to your iPhone by iTunes, uncheck the "Sync music":
-
When I try to remove the program from the toolbar of Verizon Broadband it is said "the toolbar DLL not found, help
We are not in a position to help unless you help by providing us with as much information as possible.
Suggestions for asking for help on a site.
http://support.Microsoft.com/kb/555375
http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/what-information-to-post-in-the-Windows-Update/1467f44b-ee27-4F7D-98d7-f1c4b35b3395
-
How can I remove the Windows, "Windows Picture and Fax Viewer" program from my computer
I use another software Photo and picture Windows and Fax Viewer interferes with my work with the other program. Therefore, I would like to remove the Windows, "Windows picture and Fax Viewer" program from my computer.
Info for WIndows XP - Windows Picture and Fax Viewer
------------------------------------------------------------------------
OK... but be careful... you'll lose thumbnails of photos in Windows Explorer...
your 'My pictures' folder... for example... does not display photos.And... FWIW... WP & F Viewer is not a program... it's just a .dll file. Disabling
the .dll file is basically identical to uninstall. (in this way... If you do not
as the result... you can reactivate).But if "gone forever", that's what you prefer... just delete the shimgvw.dll file.
Attention last... your thumbnails in the Explorer will be gone.
How... Disable WP & F Viewer
Click Start / run and enter the following command:
Type or copy/paste...
regsvr32 /u shimgvw.dll
(Yes, the space after the 2 and you is necessary)Press on... Come in...
(You should see a dialog box indicating:)
DllUnregisterServer in successful shimgvw.dll)How... Reactivate the WP & F Viewer
Click Start / run and enter the following command:
Type or copy/paste...
regsvr32 /i shimgvw.dll
(Yes, the space after the 2 and space after that the i is necessary)Press on... Come in...
You should see a dialog box stating:
DllRegisterServer and DllInstall in successful shimgvw.dllTo remove shimgvw.dll go to the following folder and do a right click Delete shimgvw.dll.
C:\WINDOWS\system32\shimgvw.dll
If you can't find the path, you must go to...
Button start / Control Panel / folder Options.
See tab /... to check "Show hidden files and folders"... -
I removed some programs from my Windows XP... now I have no volume.
I removed some programs from my Windows XP... now I have no volume.
Go to control panel | The sounds and see if the device is listed and you can control the volume there.
Steve
-
Remove some programs from running at startup
How can I remove some programs from running at startup? for example, Super Anti Spyware, automatically runs on startup and is listed in the lower right corner of my desk drawer, but it really slows my time to go on the internet. I only have access if necessary.
You can click on start > run > msconfig
then under the Startup tab, you will find a list of programs that launch at startup of windows. they are activated by a check mark.
In addition, you can check the services through the services tab.
Select / check "hide microsoft services" and then what remains on the revised list are non-microsoft programs you have added to the system and are also expected to start automatically.
don't forget to click 'apply' for the changes you make and then restart to see the effects.
-
Why is it when I delete a message in windows mail removes ALL messages from the Inbox in Xfinity connect
Hi Carol,.
1. don't you make changes to Windows Mail settings prior to this problem?
I suggest you check this link on how to remove messages,
Delete messages in Windows Mail:
http://Windows.Microsoft.com/en-us/Windows-Vista/delete-messages-in-Windows-Mail
Method 1: Fix problems with Windows Mail
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
For more information, visit this link, working with Windows Mail in Windows Vista: http://windows.microsoft.com/en-US/windows-vista/Working-with-Windows-Mail
-
I have an installed program 'click to call Skype"and he refused to be uninstalled. How can I remove this program from my laptop
Hello
· What web browser do you use?
· You get the error message
Follow these steps:
Step 1:
To disable this, the simplest method is to remove or uninstall the plugin Click-to-Call with Skype , through the Control Panel Add/Remove or uninstall function.
http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program
Step 2:
Click and call can also be disabled by disabling or removing the plugin through your
browsers manage add-ons/plugin options (actual procedure varies depending on the browser).
Step 3:
There is a 'Rapid Product Removal Tool' from Microsoft which can be used to remove the programs that we are not able to remove it by using the functionality of the program.
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
See also:
Skype Support site: https://support.Skype.com
Skype support network: http://community.Skype.com/ -
Remove all contacts from Sharedlist (ContactList) using Api
I want to delete all the contacts in a sharedlist using api. One method that I discovered is that api rest is to send the ID of all the contacts in the list. When there are more contacts in the list, it takes a lot of time because I have to query the list to get the ID of first contact, then send the request PUT with the ID to delete the contacts. Is there an alternative way to do. If this isn't the case, then what's the number max of ID I can send with destruction of membership options.
Concerning
Maury
Thank you very much zatokar, with your trick that I could remove all contacts from sharedlist in a single request. All we have to do is add sync action as delette in export defination. It will delete all the data on the shared list.
Sample request is less than
{
"name': 'example of export."
'fields': {}
"ContactId": "{{Contact.Id}}.
},
'syncActions ':
{
'destination': "{{ContactList [LIST_ID]}}"
'action': 'delete '.
}
}
-
Hi I bought a new Mac book with el capitan and can not install my 4 C? My old computer was stolen and I can't remove the program from the old mac book
If you see an anomaly of counting activation, contact adobe for hourly pst support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and ask a county of activation reset.
Otherwise, How to open third-party developers not identified in Mac OS X applications ' Mac Tips .
-
I would remove "research-Gol" from my computer
Hello
I would remove "research-Gol" from my computer.
I deleted from Add/Remove, always comes back as a default browser.
I removed the ons add grace to tools - manage add ons.
Always returned as a default browser.
I am windows runing XP with SP3 and all recent updates.
Help anybopdy to delete it? It seems to have hijacked my browser.
Also I tried to do a system restore, but something is blocking me to do this.
Respect of
Ron
Try this free utility/scanner
Maybe you are looking for
-
last night my Apple Watch fell on the couch and nothing happened to the screen, fortunately, but he did scratch the alumimum where he hit the ground. Is anyway to fix that? Or should I wait for Apple Watch 2 and buy a new one?
-
Why don't I stay connected to the journal online (Huffington Post)
When I connect to the Huffington Post, a newspaper online via browser Google Chrome, I stay connected for hours, until I leave the site. When you use Firefox my default browser, I be online only until I click on a story and then I noticed that I am n
-
Where are the SATA 3 Digital in Satellite P850-12Z connectors?
Hi, I'm new to the forum. I bouth a P850 Satellite last year and I plan to replace the cd with a SSD driver. However, I wonder if the conector of the driver CD is a SATA 3 or 2 SATA to maximize the writing and reading of the speed of the SSD. As far
-
I can't restore my recently added to my iTunes playlist
Help
-
How do we install rpcinfo on my windows 2003 Server
I see the Setup instructions for windows 7 via configuration/program Panel My command prompt doesn't recognize it and add configuration/software/Windows Components Panel control does not.