If its really bad for the uninitialized value register offset

Similar Questions

• How do I find/download a map its REALLY free for my laptop HP Pavilion 5000? Thanx, _ @_. ___

  How do I find/download a map its REALLY free for my laptop HP Pavilion 5000?  Thanx, * address email is removed from the privacy *.

  A sound card is a physical piece of hardware, and therefore can not be downloaded. I guess you mean the driver for the sound card.

  There are a lot of HP Pavilion 5000 variations on the HP website, so I can't give you an exact link to your drivers. The best I can do is point you here:

  http://www8.hp.com/us/en/support-drivers.html .

  You must then enter your exact model No. and the Windows version * and it will take you to all the drivers available. You can then download and install them. They will be free.

  * Make sure that you choose the drivers 32 or 64-bit according to your version of Windows.

  (To find out if you are running 32 or 64-Bit Windows click:)

  Start-> Control Panel-> system

  Then look at where it says, "System Type")

• HP Pavilion Notebook - 15-ab15: is - it bad for the battery to always have the charger plugged?

  Sorry if 'hardware and upgrade' are bad advice for this question but I've not found a better...

  Is it bad for the battery to always have the charger plugged? 99% of the time that I have the laptop on a table and it's easier for me to leave the charger connected, instead of worrying about the battery percentage all the time.

  Hello:

  Yes.

  Please read this guide from HP battery care practices to obtain the maximum efficiency of the battery of your laptop.

  http://support.HP.com/us-en/document/c00596784

• Why games are bad for the laptop? and what is the reason?

  Please can you help me I bought a series of naw computer hp laptop Pavilion g6 and I want to keep it quick and clean and no problem in

  the problem is I like to play to the laptop... my mom tell me that the games are bad for the laptop, so I won't know what is reason to make bad games for laptop?

  with

  my respect; ruaa17

  ..

  Hello

  Probably your MOM is right. More than 90% (or more) laptops are not good for modern games because their video cards can't handle the graphics in games or have to work very hard causing the machines may be overheated and the HEAT is not good for any machine.

  Hope it makes sense.

• Read the table for the next value (sequence issue)

  Is there a function in line with my_seq_no.nextval that can read a value from the previous field and get the next number in the sequence? I know how to create a sequence, but I thought that there is something as a function of getnextval.
  
  Thank you.

  Preston,

  The problem is that there is no such thing as a previous value in Oracle.
  You must specify a way (like number maximum.. etc..) to get the expected value.

  Sometimes, you can see the code as...

  insert into emp values
  (select max(empid) + 1 from emp) new_emp_id,
  ''XYZ' ename,
  .......
  ....
  ...
  from dual;
  

  As seen... the code above takes the maximum value of the emp table and gives you the identificateursuivant emp.

  The problem here is that all currently connected users will get the same value for the new empid, until a person inserts a record, then... all others would be unique constraint errors (if you have constraints on the right in place).

  Using sequences is the right way to ensure that all concurrent users get their own unique values for the new values.

  As for the getnextval, they could always get to a function which selects to the max (column-name) + 1 and returns it... but it has the same problems as the insert... Select above... So I would rather not provide code for such a thing... I would do more damage than help it. Please use a sequence for your case.

• I can't find the glyph for the elevated R (registered trademark) in Adobe Muse! How can I get?

  I can't find the glyph for the elevated R (registered trademark) in Adobe Muse! How can I get?

  Hello

  You can create a textbox with only sign registered r and then place it below the box test according to your choice.

  ======>

  Please see the attached file muse file so.

  http://Adobe.LY/1Lifw1H

  Concerning

  Vivek

• Max value return value despite where clause is not not really looking for the reason

  Hello

  Using oracle 11.2.0.3

  Select 'A '.

  of the double

  where 1 = 2

  No returns no row, as expected

  Select max ('A')

  of the double

  where 1 = 2 - that is to say isn't true

  Returns the line with null

  Why is this?

  Thank you

  Hello

  user5716448 wrote:

  Hello

  Thanks for the reply.

  I guess that's rule ageneral wait even if no line because of the place where the condition.

  where 1 = 2 - that is to say isn't true

  Thank you

  Yes, if there are no rows in the table, or no line meets the conditions in the WHERE clause, it would be logical that the query return lines exactly 0, but it is also logical that the query returns exactly 1 row.  People who have designed SQL apperantly thought return 1 row was most helpful.

  If you want the query to return 0 rows when there is no data, you can GROUP BY a constant.  For example:

  SELECT MAX (hiredate) AS last_hitedate

  FROM scott.emp

  WHERE deptno = & deptno_wanted

  GROUP 0

  ;

  If there are any rows that meet the condition in the WHERE clause, then the query will produce 1 row, but if no rows meet this condition, then the query will return 0 rows.

  Personally, I'm happy that they designed this way SQL.  I find it rather convenient that the aggregates without GROUP BY clause will return 1 row.  I do things like

  SELECT COUNT (*)

  FROM table_x;

  often, when I want to know if a table has been filled or not.  Seeing a 0 for the output is much clearer that does not get any results.

• Search for the nearest value table

  IM wondering if its possible to find a 1 d table worth, if it is not found, then find the nearest match. IM using the 'double' data type and I need at least an accuracy of 4 decimal point in the research.

  For now, im rounding decimal values to the nearest integers from you, but it is not effective at all. Im getting a lot of unwanted split in the plot. I need to be able to search for the decimal points. I found this function "About Equals.VI" starting from a previous thread. Even that uses the concept of the rounding.

  I enclose 3 screws "0.8 & 0.4.VI" are that I created, rounding decimals nearest digit.

  The "approximately equal" is the one I found online.

  The 3rd is I try to mess with what I can find as close a match.

  Y at - it a trick to work around this problem?

  Thank you

  Eureka

  This VI uses the first type of step 3 in your data.  Since you said that you can get the data, you can drop the in VI.

  At the end where I calculate the slope, you can use a linear adjustment if you have full or professional LabVIEW.

  

  

• What drivers are REALLY necessary for the 230 x?

  Hi guys,.

  I recently bought the 230 x - it's great. I also bought an ssd with it and replaced defaultt with the ssd hard drive and did a clean install of Windows 7.

  I have 2 questions:

  -the drivers are REALLY essential for my device? Visualize the page drivers, there are a LOT of drivers that can be installed, but I think that some of them are not really necessary, because I don't want to slow down my superfast x 230.

  -are there a way to download all THE drivers both in place one by one?

  Thank you in advance,

  Mustafa

  Hello and welcome,

  I can't tell you which drivers necessary for what you want to do, but the best way to get them is to install ThinkVantage System Update.  Run it and it will present all the appropriate drivers for the download and installation.

  You can review the details of each before you download and decide which ones you want.  Only, check the box for those that you want and let TVSU download and install to a slap.

  [edit] It is a pure opionion, based on nothing else than my preference: I'd rather live with the installation of Lenovo for awhile and see what I like - and then uninstall the stuff I have not.   IMNSHO, the initial indigestion is not that bad on a ThinkPad.  OTOH, depending on the size of the SSD, a clean installation may be the way to go.

  Z.

• A temperature probe is really necessary for the replacement of the hard drive?

  I replaced the hard drive in my late 2009 iMac 21.5 ". In the OWC video, he calls for a probe. My hard drive is not one of the built-in ones. I was wondering if I really need or the computer will work fine without it?

  Well without it your HD fan will be clocked at high speed all the time. The good news is that you can also control the fans/temp via the software. Here is a free software that works very well. http://www.eidac.de/

• Search for the text value data store

  Hello, I have a PDO of data to store, and I would like to search for a text value in a quantity of measure.  In each of my test series, there is a quantity of measure with the name TCNAME and stores the cell name of test in the string format.  I would like to get all the TCNAMEs that contain "TC4" for example.  Currently, I have to load TCNAME in the portal and display it in an array of string.

  Any ideas how I can do this?

  I assume you are using a PUMA testbed that stores this kind of goods on a unique value chain chains.

  There is no direct search method, so I guess that a script is the only solution we can offer.

  Datafinder you can search for the minimum and maximum of a channel. That would be too much work in the store of ASAM.

  "PDO / cpp"
  
  protected tcnameMQs: set tcnameMQs = store. GetElementList ("MeasurementQuantity", "name = TCNAME", true)
  
  protected tcnameMQ: for each tcnameMQ in tcnameMQs
  
    MsgBox tcnameMq.References ("local_columns"). Elements (1). Properties ("values"). Value
  
  Next
  
  ' AOP5 / Corba
  
  protected tcnameLCs: set tcnameLCs = store. GetElementList ("LocalColumn", "measurement_quantity.name = TCNAME", true)
  
  protected tcnameLC: for each tcnameLC in tcnameLCs
  
    MsgBox tcnameLC.Properties ("values"). Value
  
  Next
  
  

  I have added the example which should be the shortest path from my point of view. In AOP5, you can search LocalColumn and spend BA which is less overhead.

  It is perhaps a good idea to post-processing of the data base and crush the decription "Test name" by

  "The test cell name == NAME. You can search not post-processed by Searchin' for.

  protected tcnameMQs: set tcnameMQs = store. GetElementList ("MeasurementQuantity", "description = name of the test cell", true)
  
  protected tcnameMQ: for each tcnameMQ in tcnameMQs
  
    tcnameMQ.Properties ("description"). Value = "name of the test cell is" & tcnameMq.References ("local_columns"). Elements (1). Properties ("values"). Value
  
  Next
  
  Store.Save

  Thereafter, you would be able to search for it.

  Greetings

  Andreas

• How many watts of power is really enough for the photoshop job?

  I continued to read mixed reviews as 250 watts of power is a slow machine, but this seems to be what many of the machines are made up (between 250 and 300 watts of power). Is this something that is really important? Thanks for your review!

  Timetoupgrade,

  Your original question was really what is Photoshop requires to run. The minimum standards for the Photoshop, according to Adobe is this:

  Processor Intel® Pentium® 4 or AMD Athlon® 64

  Microsoft® Windows® XP with Service Pack 3; Windows Vista® Home Premium, Business, Ultimate, or enterprise with Service Pack 1 (Service Pack 2 recommended); or Windows 7

  1 GB of RAM

  1 GB of disk space available for installation. additional space required during installation

  screen 1024 x 768 (1280 x 800 recommended) with graphics OpenGL hardware acceleration, 16-bit color, and 256 MB of VRAM

  Some GPU accelerated features require graphics support for Shader Model 3.0 and OpenGL 2.0

  DVD-ROM drive

  QuickTime 7.6.2 software required for multimedia features

  Internet connection broadband required for the online services and to validate the subscription edition (as applicable) on an ongoing basis *.

  http://www.Adobe.com/products/Photoshop/tech-specs.html

  QUOTE: "I not bought a new computer yet. I never mentioned having a HP. ' and 'what would be a decent graphics card? »

  I bow to Big_Dave on this issue, I believe that it is the expert resident on graphics cards.

  Now that we understand that you have an interest in Photoshop requirements, what computer you have now, and what computer you're interested in?

• Engine step doesn't fail before reaching its physical limits for the sinusoidal movement

  Hello

  My ultimate goal is to skip a XY (via 2 linear actuators) in a circular motion (radius of 0.47 ") at a frequency of 1 Hz. I run the example VI 'Demo circle' which received my copy of LabView, version 9.0.

  The problem I encounter is that given the physical limitations of the engine and the drive motor, the task should technically be feasible (see calculation *). However, even when the engines are completely discharged (no not attached to anything whatsoever), they start missing steps away from my final goal. I'm only able to reach a radius of 0.2 "(vitesse de pointe de 1.25" / seconde). "

  My question; Is the system set up incorrectly or is my final goal unrealistic, given performance reductions inevitable due to software/hardware?

  I apologize for the naivety of this question, but if there is any information that you may provide which might shed some light on this problem, I would be very happy.

  Possible theories:

  Torque is decreased more at high speeds because of microstep

  A closed loop system would improve performance at high speed

  The VI 'Demo circle' is not the best method to create a circle

  The acceleration is the limiting factor, not speed

  * RADIUS = 0.47 "

  Maximum speed = (RADIUS * 2 * pi) * cos(2 * pi)

  Maximum speed = 2.9 "/ second"

  System:

  LabView v9.0

  PCI-7340

  open loop configuration

  MID-7604

  1 4 a per axis

  10 micro steps

  Linear actuator (form is attached)

  NEMA 17 ordered by motor (sold by ultra-motion).

  Maximum speed of 3.3 inches per second

  1. 2A voltage coil

  1.8º step angle

  Kind regards

  Nick

  Nick-

  I really wonder the max speed in the datasheet.  0,0833 "/ to 3.3" rev / s = about 40RPS (2400 RPM), which is extremely fast for a motor, especially at 24VDC.  Know exactly what engine is on the cylinder and go to www.applied-motion.com and you should be able to find curves of torque for that or a similar engine with various readers.  You will see that couple to 24VDC curves are not good.  In addition, ask Ultramotion if their speed/strength curve is theoretical, or tests have been conducted.

• Hi I have a laptop of RM and its asking me for the product key can u help me

  Hi I have a laptop of RM and its me askin for product key can u help me thx

  Use the product key on the COA label affixed to the bottom of your computer (or in the battery compartment).

• Cooling, it is good or bad for the Z5? Advice needed!

  Hi Sony'enthousiasts.

  I love my Sony Xperia Z5. It's a great phone! However, it becomes warm, especially during a hot summer day while using intensely or full sun! Just to be clear, my phone is not overheating.

  The problem:

  The problem is with the battery-life/performative and put in charge while the unit is hot. My phone seems slower load and unload faster when it's hot. Even the closing apps, the screen turns off / stand-by and restart the device do not change the apparent slowdown of the battery performance.

  Experience:

  Today, my phone was hot enough for heavy use. The battery is almost empty and I started to charge, without great results (just constant heat and a percentage or increase of five).

  I used a cool wet towel to remove heat. The towel was a little cooler than the phone. The body of the Z5 is designed to make the internal parts of the heat so my thought was to use the towel to cool the body of my Z5.

  The result:

  To my surprise, the phone can now be charged temperature as it always does. The performance as well. Of course, I was very happy with the results of this experiment of cooling

  My question:

  In light of this;

  1. you are not stupid (throw the Z5 in a freezer or keep it under water

  2. the difference in temperature is not extreme and the glass of the cracks

  Assists the Z5, with bad cooling for the device or the battery?

  Sony Xperia Support, please share your advice

  @VE_ . in my opinion I think this is a good procedure, but I prefer to cool naturally... but the way you describe it is not too drastic a cooling mode, by report you mention to some posts I saw for the Z complete series of phones to put it in a freezer or droppping in water, a much too sudden drop of temperature & asking for trouble

  I don't see your way of cooling affecting or damage to anything related to the components of the phone... but to point out it is my opinion & not Sonys