If pass, if failure, Cp 7 does not

Similar Questions

• Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.

  Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.

• Passing variable via URL - code does not - but it worked before!

  I realize there are a few other posts similar to this, but the content is not for helping me understand what I need to know.
  
  I'm trying to pass the result of a query via a URL. The code I have here passes zippo. I have two different errors; It is said that there is a SQL syntax error near 'ORDER BY' (my second page begins with a request to retrieve the records in the DB who the SchoolID that matches one that is passed by the URL) or that "SchoolID" is not defined in the query.
  
  What's weird, is that one) I'm sure I used the thing accurate (with different players) on another page and it works very well in the other site and b) the result of the query is successful output on the page that I try to send the result. I know that this is not the second page, because if I hardcode a school, on the first page or id in the URL field on the second page, it works very well, allowing the exit of the correct name of the school.
  
  Can anyone spot what I'm doing wrong? Thanks in advance for any help you can provide.
  
  
  

  Looked like you added the tags so that you actually pass the getSalutation.s_SchoolID VALUE rather than the #getSalutation.s_SchoolID # string itself. After your actual code... and anchor href on your first page... Miss you and tags.

  Phil

• There is a bar type to pass or web search that does not work after installation ver8. Meanwhile we for many sequence using the gogle search first, then go on the web that should be only type n with formla version before 8.

  I used a Firefox oldies until one day, she has been updated in the new version 8.0, then the access bar for research that has happened every time when I go to the website I do there and enter wasn't working more.
  I use Windows XP as an o/s, with Pentium dual core CPU.
  Finally, I used to tap on the Goggle search bar, entrance to enter the pint n research to go on the web I want.
  It make it difficult when in a hurry and make me upset.

  do not know who change the  search bar which is common to enter  web address on there and work excepted for this new Firefox 8.0.
  

  If any changes, please check and advice.
  Thank you
  Concerning

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• Pass music on Windows 8 does not not (charge for music)

  My wife has just upgraded its Windows 7 computer that used the Zune for Windows 8.1 with Xbox Music software. But when she goes to look at the music, he wants to charge him anything. It's as if he sees not his XBOX music pass.

  It uses only a Microsoft ID so what's the problem?

  -Jonathan

  Hi Jmoons,

  We have a dedicated forum for XBOX. I suggest post you your query in XBOX support Forums for assistance on this issue.

  You can check the link to post your question:

  http://forums.Xbox.com/?XR=shellnav

  See also the link below to help out with XBOX

  http://support.Xbox.com/en-us/Xbox-on-other-devices/Windows/how-to-add-music
   

  It will be useful.

• Firefox started pushing advertising - when I click on a page, a different page ocmes to sell something. I'll pass the browsers if she does not stop

  Sometimes I click on something, and the link opens a page completely different advertising something. If I click on the arrow to the left and click again, it opens with the exact link.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• After failure of printer does not print!

  Printer will no print only during the process of re - start.  Not only the printer by default, but all the printers on the network don't print them indicés when I reboot.

  Help!

  Hello

  1. do you get an error message? If Yes, what is the full and exact error message?

  2. What is the brand and model of the printer?

  Method 1:

  I suggest check the link and try to run the Troubleshooter:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  I you suggest to remove all instances of the printer and then try to install it.

  To remove printer drivers:

  a. click Start, type print management in the search box, and then click print management.

  b. open print management.

  (c) in the left pane, click print servers, click the applicable print server and then click Printers.

  d. in the center pane, right-click on the printers that use the driver that you want to remove or change the driver that is used by each printer to another driver.

  e. in the left pane, click print servers, click the applicable print server and then click drivers.

  f. in the pane, right click on the driver and do one of the following:

  ·         To delete only the installed driver files, click Remove.

  ·         To remove the driver package from the driver store, completely removing the driver from the computer, click delete the Package driver.

  Reference:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  Method 3:

  Check the link and see if it helps:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• 881 failure: The Application author does not match debug author token

  Hey guys, I'm a newbie at software development and don't know anything about the other languages except HTML and CSS so I decided to try the apps program to see how it works and if it's the right think for me. I received my 'key' for the playbook and generated and download the Debug Token. My first idea was to put the Hello World app (that I copied on the BB site) on my playbook to see if everything works, but every time I try to download the app, I get "the application failure 881 author does not debug author token.

  I have tried a few troubleshooting myself (make another Debug Token, adding the and a blackbery - tablet.xml with these fields in the config.xml file and) and still nothing. Do you know the guy what is happening and what should I do to solve this problem, so I can download my apps on my playbook?

  Thank you

  Oskar

  There is an easier way... and maybe just an alternative.  I had this problem before and the reminder to change the bbwp.properties file to run.

  For more information, see this page:

  https://developer.BlackBerry.com/HTML5/documentation/runnning_unsigned_apps_using_a_debug_token_1866...

  Copied from this page:

  For PlayBook OS applications

  1. In the SDK BlackBerry WebWorks for BlackBerry Tablet OS installation folder, navigate to thebbwp\bin folder.
  2. Using a text editor, open the bbwp.properties file.
  3. Add the path to the file to debug token using the debug_token > tags.

     path to debug token file
     

  Example: file bbwp.properties with the path to the file debug token

  
  
  -quiet
  C:\Program Files\Research In Motion\BlackBerry WebWorks SDK for TabletOS 2.1.0\jre
  AirAppTemplates
  AirAppTemplates
  C:\Program Files\Research In Motion\BlackBerry WebWorks SDK for TabletOS 2.1.0\bbwp\blackberry-tablet-sdk
  ext
  C:\my_debug_token.bar
  
  

  You can now load your app on a debug-enabled BlackBerry device without having to sign

• Vista 64 does not start after the bios screen. Can not boot from the recovery cd or help

  Last night a MS pushed a windows update and my pc restarted automatically.  But it does not actually restart.

  The PC goes through the bios tests, passes and then crashes and does not start in Vista.

  I can't start at all, including safe mode.

  I can't the system recovery option in HP bios to load.  Can I only use my Vista64 system recovery bootable cd or actually start.

  First of all, I thought it was a HARD drive problem, but tests of the bios disk hard that all spend, even the 2 hours 'SMART' test that he was running.

  Help

  Hello

  What happens when you try to boot from the recovery CD? You receive messages or error codes?

  You can check if the boot in the BIOS settings priority is configured to boot to CD\DVD.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you still experience the problem, you may need to contact HP for assistance.

  HP support

  Hope this information is useful.

• Studio XPS 8100 does not start

  Hello!  I have a 2010 studio xps 8100 (Intel (r) Core i7 CPU 860 to 2.80 GHz, 8 GB ram) and it's great when it works.  Last week, I was out of town and when I came back it would not start upward.  I can turn it on and start the fans, but it does not pass the POST and therefore does not start.  I tested the ram and it seemed ok (two beeps when trying to boot without ram, no beeps when ram is correctly placed).  The original of the graphics card died last year and I had it replaced with an EVGA Geforce GTX 750, I chose because it was one of the few cards that could work with the power supply 350w provided with your computer.  I thought that maybe the PSU was then replaced by a 500w PSU, but the problem persists.  I then read somewhere that if you SNYC date/time problems (which I was when the computer would turn on) that you need to replace the battery on the motherboard, so I did and still does not start.  I don't know what I can do, is the dead motherboard?  I tried the drain the power thing (release the button so that disconnected power for 30 seconds) and that didn't work either.

  maddygillis

  Yes, but I'm sure that the battery is not the issue.  If it was I'd get stack codes error beep (5 beeps).

  Not necessarily...

  maddygillis

  It does not pass the POST because it does not start...

  If the video card is faulty, the PC can still start but you just do nothing appears on the monitor, so I don't know that you can actually say that it does not pass POST.

  When you have tested the monitor with your laptop, did you use the same cable and video port on the monitor that you use with desktop? If you have used another port on the screen with the laptop with the office, this is not a fair test.

  Have you tried reinstalling the video card into its slot and check the connections of the video cable at both ends?

  This system has onboard video and Pluggable software component video card. So, you can remove the add-in card and switch the monitor to the onboard video port. According to the specifications, the onboard video has HDMI and DVI outputs, so assuming that your monitor supports either people, you have an easy way to test more.

  NOTE: The embedded video ports are DISABLED unless you physically remove the video card. If you cannot move just the video cable to a built-in port while the video card is installed.

• I get the error message "logon failure: the user has not been granted the type of logon required on this computer." on the workgroup computer.

  Original title: home network problems

  Here's what I have-

  1 PC connected via LAN - named PC - running Windows 7 pro 32 bit

  1 computer connected via WiFi - named TECRA running Windows 7 pro 64-bit

  1 computer connected via WiFi - named TOSH running Windows 7 Starter Edition

  Network LAN named changed to have the same name as the network WiFi (SSID)

  All computers have the same workgroup name

  Initially, I had a home group for them, created by TECRA but trying to solve the problem I deleted it.

  PROBLEM:

  PC and TOSH communicate perfectly both ways

  TOSH and TECRA so

  HOWEVER, the PC can access TECRA via the NETWORK, but sees TECRA PC and can not access

  Error message:

  \\Parents-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if access you permissions. Logon failure: the user does not have the type of logon required on this computer.

  Attached the screenshot:

  Please Please HELP...

  Thank you

  

  Hello

  I suggest you to run the next fixit mentioned in the following link and check:

  How can I reset the default Hosts file?

  http://support.Microsoft.com/kb/972034/en-us

  Please answer us on the State of the question to help you further.

• Student Creative suite edition serial number does not work

  Hello. I bought creative suite for students on amazon and received a serial number with her. The problem is that it is not recognized when I try to install the program. What is the problem? Thanks for your help!

  You can check with the seller from whom you purchased the software on how to install it correctly.  Serial numbers are not normally required to install applications.  They are normally needed for activation after installation.

  If you got passed to installation and activation does not work, then you should contact the Adobe Support by chat or phone when you have the serial number and activation problems.

  Here are some links to help get in touch:

  http://www.Adobe.com/support/chat/ivrchat.html

  http://www.Adobe.com/support/download-install/supportinfo/

• c#, Win 2 k 3 server, Vix 1.6.2 VMWare Server 2 - does not connect

  Hi all

  I'm not the first hurdle...

  My class:

  using System;
  using System.Collections;
  using System.Text;
  using VixCOM;
  
  namespace IntegrationTesting
  {
       public class IntegrationTest
       {
            VixCOM.VixLib lib = new VixCOM.VixLib();
            VixCOM.IJob job;
            VixCOM.IHost host;
            UInt64 err;
            object results = null;
  
            public static void Main (String[] args) 
            {
                 IntegrationTest instance = new IntegrationTest();
            }
  
            public IntegrationTest()
            {
                 this.Connect();
            }
       
            public void Connect() 
            {
                 this.job = this.lib.Connect(VixCOM.Constants.VIX_API_VERSION,
                      VixCOM.Constants.VIX_SERVICEPROVIDER_VMWARE_SERVER,
                      null,
                      0,
                      null,
                      null,
                      0,
                      null,
                      null);
  
                 this.err = job.Wait(new int[] { VixCOM.Constants.VIX_PROPERTY_JOB_RESULT_HANDLE },
                      ref results);
  
                 if (lib.ErrorIndicatesFailure(err)) 
                 {
                      Console.Out.WriteLine(VixCOM.Constants.VIX_API_VERSION.ToString());
                      Console.Out.WriteLine(lib.GetErrorText(err, null));
                      Console.Out.WriteLine("Error code: " + err.ToString());
                      Console.In.ReadLine();
                 } 
                 else 
                 {
                      this.host = (VixCOM.IHost)((object[])results)[0];
                 }
            }
  
            public void FindItems () 
            {
                 this.job = this.host.FindItems(VixCOM.Constants.VIX_FIND_REGISTERED_VMS,
                      null,
                      -1,
                      new DiscoveryCallback(lib));
            }
       }
  }
  

  The output:

  -1

  The system returned an error. Communication with the virtual machine may be interrupted

  Error code: 16 {/ code}

  I tried to use

  NetSh int ip fireplace DISABLED {/ quote}, but it still does not.

  I can connect to the VMServer via https://:8308/UI very well.

  Anyone have any ideas?

  PS. This text/thread/post editor is absolutely, outrageously hideous

  You will need to use VIX_SERVICEPROVIDER_VMWARE_VI_SERVER

  Here is my implementation of connect:

  "M_host As String ="https://172.16.4.242:8333 / sdk"'"https://172.16.2.2:8333 / sdk"' specify ip NOT DNS"

  Dim m_port As Integer = 0 ' value does not matter to connect to VMWARE server 2.0

  Dim m_user As String = "user" "must pass to the user/pass explicitly; the current user does not work

  Dim m_pass As String = "pass".

  m_hostJob = m_lib. Connect (VixCOM.Constants.VIX_API_VERSION, VixCOM.Constants.VIX_SERVICEPROVIDER_VMWARE_VI_SERVER, m_host, m_port, m_user, m_pass, 0, NULL, null)

• Photos does not scroll

  Hello

  I'm trying to fallow this great tutorial, but I'm still stuck on this one part. Here is the link for the video

  http://www.tutvid.com/tutorials/flash/tutorials/scrollingThumbs.php . I'm able to do everything very well until the part where you make the thumbnails do scroll through and stop when the mouse passes over it. Mine does not move. I feel like I'm everything he says, but still I can't understand. It's so frustrating! Help, please! Thanks in advance,

  Meegan

  you will be able to use what you learned or developed from this first tutorial.  but the key on scrolling thumbnails part you will need to learn from another tutorial.

• Pass does not work

  Do not know why but last Pass does not. I installed it and it shows on the Add-ons Manager. I have disabled and abled several times and it will not work. What should I do?

  Worked LastPass you previously in Firefox 33, or is this a new installation of LastPass?

  If you don't get a useful answer here, try LastPass forums: https://forums.lastpass.com/viewforum.php?f=5