Pass does not work

Similar Questions

• Single-pass does not work for Web sites after the last update of firefox

  Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.

  Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.

  You may need to exit Firefox and start it again before it takes effect.

  A little luck?

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• simple pass does not work to open emails

  simple pass does not work to open emails

  Duplicate the content of the Post-

  My os is windows7 IE9 browser

  Pass Simple contact support.

• Dv7-7240us Rnvy: single pass does not work after upgrade to Windows 10

  Hi all

  I just upgraded to window 10 (took 3 hours, work). However HP Simplepass now does not work.

  Anyone else having this problem?

  Brian

  Hello

  I fixed this problem by using "run programs for previous versions of Windows.

  BrianH15

• HP Envy M6 1125dx running Windows 8.1 and my fingerprint reader/single pass does not work

  Hello

  I'm not able to use my finger print reader/single pass, now that I've downloaded windows 8.1

  Read a few other questions and difficulties people exercise but were not able to always operate.

  I have a HP Envy M6 1125dx

  00179 60246-20486-AA0EM

  64-bit Intel Core i5

  Running Windows 8.1

  Thank you

  Hi Ricksd,

  Welcome to the HP Forum.

  If you still have an old driver Validity Sensor in your system, you may need to upgrade to one that supports 8.1:

  sp58869 validity sensor V4.4.234.0 Win8

  If you still use an older version of the HP SimplePass software, you may need to upgrade the program.

  If you have recently upgraded to 8.1 Windows, make sure that all of your Windows updates are up-to-date.

  If everything is already at the level of the correct version, then you can get away with just reset the drivers:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your laptop
  • Start the computer and connect

  If the Hard Reset does not help,

  so check out this guide for advice on how to relax program in order:

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

  Dragon Tip: Export your SimplePass Webcards!

• HP envy 15-j067cl Simple Pass does not work

  Just bought Envy 15-j067cl yesterday with the fingerprint reader, which I've never used it before.  I did all the updates of Windows 8 and then upgraded to level to Windows 8.1.  I uninstalled Norton, using the removal tool, because I have a current subscription for other security software.  I tried to find a way to implement the Simple collar, which is what I understand how to set it to use my fingerprints.  I was unable to put in place.  I checked for Validity Sensor Device Manager and saw the yellow exclamation with this message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) "

  I checked this site, saw a suggestion for drivers of HP recovery, so I did it and now the validity sensor does not show in the Device Manager.  It shows only as "unknown device - another device."  How can I fix it?

  Hello

  First, if you haven't already done so, install the driver from Chipset 8.1 on the following link.

  Chipset Driver - Windows 8.1

  When this has completed, restart the laptop.

  Then see if you can install the following Validity Sensor driver.

  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63418.exe

  Kind regards

  DP - K

• Synaptic pointer is no longer scrolls or zooms, moves the cursor. My HPSimple Pass does not work either.

  I have a HP Pavilion dm4 (2010), and there are 3 days my synaptic pointer stopped through the operation device of slide two fingers to scroll and zoom by opposition or reposition figures. This happened at the same time I had a rep of Norton Antivirus instruct me to delete temporary files on my computer because my computer iliteracy. After I deleted what I was asked to delete, both my pointer and simplepass finger drive has stopped working.

  How can I fix it? Or do I remember Norton?

  Go to device-> slot Manager "Mice and other pointing devices" double click on your Synaptics pointer-> click on the driver tab, if the button "Roll back driver" is active, click on it or click the button 'Update driver... '. "-> choose"Browse my computer for driver software ".

  For your fingerprint reader SimplePass see this:
  Install and use the HP SimplePass fingerprint reader
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02518653&tmp_task=useCategory&LC=en&DLC=en&cc=us&destPage=siteHome&tool=&query=DM4-1150ea&product=4314524#n178

  You may need to download your Synaptics and SimplePass:
  Support for drivers &
  http://welcome.HP.com/country/us/en/support.html
  Enter the model number of your product HP Pavilion dm4
  Then select from the list
  Select your operating system
  Choose your drivers under driver, keyboard and other pointing devices and software security

  I hope I could help

• HP Simplepass does not work in Google Chrome after chromes released 29.0.1547.66 on seven 2

  PRODUCT DETAILS

   

  Product name: HP Pavilion dv6 Notebook PC

  Product number: LM720AV

  Operating system: Windows 7 Home Premium 64-bit Service Pack 1

  Version of Google Chrome: 29.0.1547.66

  HP Simplepass version: 6.0.100.252

  DESCRIPTION OF THE PROBLEM

  HP Simplepass does not work in Google Chrome after that chrome stable release 29.0.1547.66 September 2

  Hello

  I use HP Simplepass in google chrome for the last two years. HP Simplepass and chrome is a good combo and the very useful software which helped me a lot. Everything was going well until the chrome to date has been updated with its latest stable version 29.0.1547.66. Now hpsimple pass does not work. I tried to re install chrome and hpsimple pass, even I tried the factory reset but nothing has worked. Hpsimplepass works with Internet explorer, but not with chrome.  I simply want to hand broken without hpsimplepass in chrome. someone please help me solve this problem.

  -Josiah

  Hello

  different versions of Chrome require a different version of the SimplePass. You can see the version for two in programs and features. It is very important and useful for checking, because if it is possible, you will want to avoid t

  o of course it was a big Chrome update that caused it. AuthenTec (3rd part - is no not part of HP) will have to make changes that work around all that has changed with the new version of Chrome. It's already happened and it will happen periodically, with any extension. As Chrome updates, extension developers make changes to follow.

  I'm here to help as much as I can. Obviously, I can't re - write software SimplePass Authentec so my help will be limited. Support to AuthenTec site gives these instructions for how expansion (logon Web) does not work correctly.

  Basically,.
  1. update both - you all have updated to Chrome. If you have an older version of SimplePass, the latest version of SimplePass is 6.0.100.272.

  2. make sure that the logon Web extension is enabled. I think that everyone has done it, but check just in case the update of Chrome can be disabled.

  3. the screenshot of Authentec support siteChromeIssue.jpg

  else there (re-create the user database).

  Then of course, there was a big Chrome update that caused it. AuthenTec (3rd part - is no not part of HP) will have to make changes that work around all that has changed with the new version of Chrome. It's already happened and it will happen periodically, with any extension. As Chrome updates, extension developers make changes to follow.

  I'm here to help as much as I can. Obviously, I can't re - write software SimplePass Authentec so my help will be limited. AuthenTec gives these instructions support site for how expansion (logon Web) does not work correctly.

  Basically,.

  1. update both - you all have updated to Chrome. If you have an older version of SimplePass, latest version of SimplePass is 6.0.100.272.

  2. make sure that the logon Web extension is enabled. I think that everyone has done it, but check just in case the update of Chrome can be disabled.

  3. screenshot the site of Support of Authentec

• My book pro 15 Mac since April 2014 retina does not work because of problem of logicboard, and without any reason. Fact it is passed to one of you so early? Do you know something about any recall for this problem?

  My book pro 15 Mac since April 2014 retina does not work because of problem of logicboard, and without any reason.  Fact it is passed to one of you so early? Do you know something about any recall for this problem?

  There is no repair program from Apple for any 2014 Mbit/s at the moment.  Have you taken your MBP to a store for a FREE Apple genius bar?

  Ciao.

• HP Simple pass Manager 6.0 does not work in Firefox 30

  I have been using HP Simple pass Manager 6.0 almost the entire Bill by paying websites. Recently my Firefox browser set to update Firefox 29 to 30 of Firefox. Now my HP Simple pass Manager 6.0 does not work in Firefox 30 in all.

  I contacted Mozilla Firefox and they said it's you plugin to increase the power of the fix. Is there a plugin fix soon?

  I rely on this program for extra protection.

  Thank you

  Chief

  Chief,

  Downgrade to the version of Firefox prior to Version 30 to allow the HP SimplePass extension to work.

  The instructions are below.

  The downgrade of the browser can disrupt the HP SimplePass database.  In fact roughly about everything upsets the HP SimplePass database.  The smile.

  Archives of Firefox

  Example: 26.0 for Windows download version (using a slightly different path for Mac)
  https://FTP.Mozilla.org/pub/mozilla.org/Firefox/releases/26.0/win32/en-us/

  ===========================================================================

  You can overload well enough, that is, install the old version of Firefox on the top of your new version.

  To be sure, export your bookmarks before making any changes in case something weird.

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Export your Firefox bookmarks
  • Download and install your selected version of Firefox

  Continue:

  • Close all your programs and shut down your computer
  • Unplug everything (little unifying for the keyboard / mouse external can stay)
  • Perform the Hard Reset for your model of laptop
  • Start the computer and connect

  Reminder: Hard Reset is just a device to reset.  The procedure do not destroy your files, or it destroys your Windows installation somehow.  It's just "clears the cobwebs".  Depending on the cause of the problem, this kind of "reset" can fix a variety of computer problems.

  If no joy:

  Open the Document of Dragon:

  HP SimplePass upgrade instructions

  Follow the procedures described in the guide for

  1. Export your Webcards
     
  2. Reinstall the driver of validity
  3. Restart / reboot the computer and log in
  4. Fix HP SimplePass program
  5. Restart / reboot the computer and log in

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• Hi my adobe photoshop password I just change does not work on creative cloud that I paid each month I can do every time I go into a creative cloud to update my photoshop my pass word application does not treated jean sobieski E-mail sobieskijean

  my password on creative cloud does not work I edit in adobe, but it does not work on creative cloud what will I do it please

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

  Manage your membership and your payment. Creative cloud

  https://helpx.Adobe.com/x-productkb/policy-pricing/membership-subscription-troubleshooting-creative-cloud.html

• pass the loop does not work in a MIAW

  Hello

  Try to open a movie in a window (MIAW) with this code:

    wndAbout = window().new("about")
    wndAbout.open()
  

  The film about.dir has a few simple tricks, a label on the first image, and a script "go loop" at frame 10 on channel script.

  The window opens and about fine display, but the problem is that the loop go does not work. The playhead continues. I also tried with a go the frame without success. The channel of script is activated, I checked with an alert() call.

  If I try the code above in a new movie with only one button, it works.

  Tried to remove all of the original film but the script and the button, it doesn't always.

  Someone has an idea of what could be the problem?

  Thank you.

  Edit:

  Windows 7 64B, Director 11.5.

  The problem only occurs with the projector (heel). In design mode, there is no problem.

  After hours of tests, I found the solution.

  The problem was buggy text by hyperlinks members in previous versions of 11.5.

  First solution was to remove the members of text.

  Then I've upgraded all xtras (external to the latest version (11.5.9r629) projection) and all problems where gone.

• Manual Update button in to 34.0 does not work

  I tried to manually update my laptop last night 33.1.1 to 34.0. When I click on the button "Update to 34.0 ', it immediately turns to"Restart to update"- nothing has been downloaded." I try to click on the restart button and nothing happens. I quit and restart Firefox, and I'm still running 33.1.1. Operating system is Windows 8.1. I get the same results this morning on my desktop (Win 7).

  Updated - it now works on Windows 8.1, still does not work on Windows 7

  Firefox 'All systems & languages' versions download page will give you the 34.0.5 Firefox version that defines the default on Yahoo search engine if you are in the time zone of the United States region.
  If you are in the American zone and have not changed the default search engine, then you get passed to Yahoo! and you will need to return this change manually yourself and set Google as default search through manage provider (change) search engines.

  • https://support.Mozilla.org/KB/search+bar
  • https://blog.Mozilla.org/blog/2014/11/19/promoting-choice-and-innovation-on-the-Web/

• OSX Server caching does not work after update

  It was low on my priority list, but the OSX Server that we run in the House for the caching seems to have stopped caching; from what I remember, it was related to the update software to 10.11.4 of what it was before, and server software everything that has been installed to 5.1. Updates both to the latest versions now have not helped. It of kind of frustrating, but all he puts in cache are now asking that makes for itself. No customer request is visible. It worked before.

  There seems to be no useful diagnostic that I can find to establish why the hell it suddenly does not work.

  Platform: Mac Mini, "the end of 2014", bought this year. OSX currently on 10.11.5; 5.1.5 Server

  Network configuration: IP public addresses multiple; several subnets.

  Clients do not use the same IP address as a server.

  Full assignment of the IP of the site listed in _aaplcache._tcp TXT DNS records (plural - because I did it for the DNS records for each subdomain DNS LAN client) using the type prs; DNS is on Windows Server 2012R2. Any length of characters, because they were not specified during the installation of OSX Server cached the required DNS records.

  No firewall is between the server and clients on the local network (only a L3 switch), but obviously, if the customer traffic leaves our network, it passes through a firewall. No change to the rule group since it worked finally.

  The Mac Mini has an interface (with IP address and corresponding DNS record) in each subnet of the client (using virtual LANs), but it seems to register with the Apple servers using its main wired LAN IP (which can reach customers) with the Apple servers.

  Mac Mini connects via gigabit ethernet.

  Wireless connectivity is through a mix of HP MSM and Ubiquiti access points; no system seems to result in customer traffic.

  My understanding of the protocols involved are something along these lines.

  -OSX server registers with Apple, using its normal connection; transmits the local LAN IP address for the cache clients to use; can pass TXT DNS records to help "seed" of customers, or can use the parameter entry in the cache server configuration.

  -Customers use the TXT DNS record to inform the global servers of Apple that they need the IP address of the server cache.

  -Apple returns the local LAN IP address.

  -The customer is for the server cache.

  -Profit.

  I certainly see the first happening party - the Debug.log show apparently successful registration; the cache in the applet Server service is green - but no client request seems to happen.

  

  Obscured address IP addresses are correct.

  

  Things are green and just seem to.

  

  Looks like he should be happy.

  

  IPs are correct and correspond to the DNS records.

  Help! What other steps can I take to diagnose - and trouble - this problem? The Apple Help documentation is not really very useful (I understand what he says), but he doesn't really give sysadmin level overview of what to do when he's not "just works".

  Thanks in advance for all understand how to debug properly and fix this.

  .. .clients can and collect software on the internet (that we want to avoid as much as possible).

  Amount of updated data in cache is so small that I did it (reset button) in the case which has been randomly a question. No joy. Was previously more than 300 GB in size, across many types of content.

  If it is not clear, the clients and servers using NAT, but different IP are used, depending on the subnet they come. He previously worked.