I get the error message "logon failure: the user has not been granted the type of logon required on this computer." on the workgroup computer.
Original title: home network problems
Here's what I have-
1 PC connected via LAN - named PC - running Windows 7 pro 32 bit
1 computer connected via WiFi - named TECRA running Windows 7 pro 64-bit
1 computer connected via WiFi - named TOSH running Windows 7 Starter Edition
Network LAN named changed to have the same name as the network WiFi (SSID)
All computers have the same workgroup name
Initially, I had a home group for them, created by TECRA but trying to solve the problem I deleted it.
PROBLEM:
PC and TOSH communicate perfectly both ways
TOSH and TECRA so
HOWEVER, the PC can access TECRA via the NETWORK, but sees TECRA PC and can not access
Error message:
\\Parents-PC is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if access you permissions. Logon failure: the user does not have the type of logon required on this computer.
Attached the screenshot:
Please Please HELP...
Thank you
Hello
I suggest you to run the next fixit mentioned in the following link and check:
How can I reset the default Hosts file?
http://support.Microsoft.com/kb/972034/en-us
Please answer us on the State of the question to help you further.
Tags: Windows
Similar Questions
-
Original title: irremediable failure?
Whenever I try to back up the computer I get an error message: Catstrophic failure (0x8000FFFF). I don't know how to solve this problem.
Hello
1 have had any changes made to your computer before this problem?
Please, try the following methods and check if it helps:
Method 1:
Error message when you try to perform a backup system on a Windows Vista-based computer: "catastrophic failure (0x8000FFFF)".
http://support.Microsoft.com/kb/973558/Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
Hope this information is useful.
-
I downloaded the free app Adobe Content Viewer, but when I try to connect, I get an error message "authentication failure". What should I do to fix this?
Did you go digitalpublishing.acrobat.com, connect with the Adobe ID and accept the terms of use? If this is not the case, do using a computer. You can't do this from a mobile device. This is not an automatic process, you must do it manually.
-
I am trying to install an update to iCloud on my Win 7 PC and I get an error message that there is a problem with my windows install. How can I solve this problem?
Hello grandpa_bill,
Thank you for your participation in the communities of Support from Apple.
If you get an error when you install an update to iCloud for Windows, try to download the latest version of download iCloud for Windows.
For more information, see get help using iCloud for Windows.
All the best.
-
Whenever I'll sign in my e-mail, I get an error message saying that my account has been blocked temporarily. I changed my password, and I always get the same messages. I can't send email because it asks me to verify my account. When I do, I always get the same message. What can I do else? Help!
Hi Tom,
Are you referring to Windows Live Mail? If so, I would say that to visit the Windows Live Solution Center that is not a problem we can help solve the answers: -
I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.
Installed the new hard drive on my Toshiba laptop and when I ran my recovery disk, Windows Vista installed, but when I restarted computer I get an error message saying 'installation of Windows could not configure Windows to run on hardware on this computer.
Help, please.
Hello
Your error message, the problem is probably caused by BIOS or DVD settings or bad cabling to SATA hard drive. Please do the following to narrow down because of the problem.
(a) ensure that all laptops the same hardware, the same manufacturer and the same model.
(b) upgrade the BIOS to the latest version; go into the BIOS and enable "Load Fail - Safe Defaults".Warning of the BIOS:BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
(c) If you connect the SATA drives, please configure the SATA controller in compatible mode in the BIOS. -
I have a side bar to the right of the office, the problem is, whenever I try to click on an icon on the toolbar at the bottom, a vertical translulent [box, rectangle, border?] appears in the sidebar and the items on the toolbar at the bottom, me disabling click on the items on the toolbar. Is it possible to resize or remove the [box, rectangle, border?]?
ALSO, whenever I log in, I get an error message indicating that google desktop did not start correctly. but I have not found a solution to this problem. can someone help me?
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Use the Progam below to remove annoying boot for her entry to the problem of Google:
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.
See you soon.
Mick Murphy - Microsoft partner
-
failed to connect the user had not granted the type of logon required on this computer
W2K, Win XP Home, Win XP Vista Pro and al
Some win appear XP OS like win 2 k professional versions, others as XP Home appear as WP Pro builds.
The integrated network has a combination of these BONES still bastard licensed and the subject of errors occur"failed to connect the user didn't would have been granted the type of logon required on this computer.
What sets with that?
Never had this problem until that Microslop mixing and matching the OS with no sense of compatibility problems started
IS THERE ANOTHER OS THAT WORKS THERE... PLEASE EXPLAIN!
Frustrated and angry consumers of products Microslop
Dave R
check out this link and see how it works for you.
http://forums.techguy.org/networking/533210-solved-user-has-not-been.html
-
I have synced my creative files could (trial versions) on my Apple MacBook Pro laptop. I constantly get an error message that says, "some files could not be synchronized." I'm at 2 GB of capacity. What now?
Links for synchronization of files that can help
-https://forums.adobe.com/community/creative_cloud/host_sync
-http://helpx.adobe.com/creative-cloud/kb/arent-my-files-syncing.html
-http://helpx.adobe.com/creative-cloud/kb/cannot-share-certain-types-files.html
-Size limits https://forums.adobe.com/thread/1488242
-
When I try to batch photos to resize in Scripts > Image Processor function, an error message that says: "comand"Pen"is not available. What can I do to fix this?
Yes Adobe tile action fails with the error when he didn't is not the active selection. Note that the Cut Out, built-in frame and thumbnail (selection) after their name. These actions require an active selection to the selected mobile dotted lines before using the action. Action seeks to soften the selection that were provided to you. There was no selection, so there is nothing to be flag.
In addition, the step of the pen in the action of the tile is an interactive step on its dialog box is. An interactive action defeat as the design of the Image Processor script commands. Isn't interactivity in a batch.
-
What should I do when I get an error message relating to a code not valid when you try to download DC Pro?
you don't need a code/serial number to install a trial version.
Available downloadable Setup files:
- Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC, XI, X | Suite X | 9,8 | 9 pro extended exe,7z extended pro 9 | 9 standard | 8 standard
- Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
- Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
- Contribute: CS5 | CS4, CS3 | 3,2
- FrameMaker: 12, 11, 10, 9, 8, 7.2
- Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
- Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
- Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
I am running windows xp and when I try to update itunes on my computer I gat windows error message install is missing either a program or a program that can't run so cannot complete the installation. How can I solve this problem?
I received a response that gave me a link to the microsoft fixit Center which fixed several problems that have been causing this to happen. So if you have this problem, or a lot of other problems, you can go to the following
Problems installing and uninstalling programs on Windows computers
http://support.Microsoft.com/kb/2438651other then you can go to
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Creator of effects ideas: cartoon
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello Limespider,
Thank you for your message. Please click HERE to contact the cartoon effect creator support as only they will be able to help you with the registration of their product.
See you soon
Jason H. Engineer Support of Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.
-
I get an error message 'Microsoft Shared Fax Driver' is not installed.
I was able to select 'Fax' from the list of printers and go through the Fax Wizard to send a document from my computer. Now, the document goes to the queue, but is not sent. The only message I get is that the Microsoft Shared Fax driver is not installed.
Help.
Original title: my PC under XP said that 'Microsoft Shared Fax Driver' is not installed. It was, and it used to work. Where can I get the driver and is it an extraordinary process to install it?
Hi Gordon1937,
Have you made changes on the computer?
Method 1-
I would have you look at the article-
How to enable and configure the fax service in Windows XP
How to add components and programs to a Windows XP computer
Method 2-
You must perform a System Restore to undo the changes made on your computer.
See the article-
How to restore Windows XP to a previous state
Note: perform a System Restore will cancel all changes made previously on your computer. You may also lose unsaved information as well. Proceed at your own risk.
Hope this helps!
-
I installed Win7 using a .wim that I used successfully several times before. The .wim is on my USB and the computer is not connected to the network. Using a disk to start Windows PE and imagex, I applied the image. When Windows 7 was started for the first time and prompted me to a computer name, I entered a name with only lower and upper case characters. An error message told me that some characters that I had used were not valid and listed the characters not valid, which I had used.
What is my next course of action?
I did a hard reboot and Windows later accepted my computer name.
This has been resolved.
Maybe you are looking for
-
iMovie is important and manages 4K, 100M, 30 p video from my Panasonic FZ1000 camera, but I don't get the option to select the elagueur or precision in the menu editor drop-down (they appear grayed out,) and I can't cut my files. IMovie is compatibl
-
It is a home computer, and I am the computer administrator. This has happened recently as when I do another admin profile it works fine? helpppppppppppppppp D: also I tried the system restore, and it says that it failed as each time D:
-
Dv6-3170 recovery has totally disappeared. Need help to get it back!
-
I use Microsoft Security Essentials on Vista x 32. Security Center tells me to start Windows Defender. I click to start, but he tells me that I have to restart my computer or manually start Defender myself. I go to services, and it does not advoca
-
Hi I have a hp compaq with the number 52514572, I know that you've helped a lot of people, so I am hoping you can help me. I am running windows 7