If some Soft, as a Note, is supposed to be free, why the drop-down list, 'buy '?

Similar Questions

• Downloaded brushes do not showing on right click in the drop-down list

  I recently reinstalled Photoshop cs5.1 and ran into a problem. My brushes installed is not appear on my right click in the drop-down list. I took old brooms and copied the folder to the new location. When I use these brushes there was once a large drop-down list when I right click anywhere on the canvas. It shows now that the brushes from base, but here's the thing that I can load and see them through the screening Manager, but they are not on my drop-down list, like they were before I reinstalled it.

  I noticed something weird, so this can help the solution I've noticed that some Photoshop files are saved on my second hard drive, but I don't know if this is the cause.

  The reason why I have reinstalled my acceleration is GPU did not work and had to reinstall to fix this. If any other information is needed, I'd be happy to share. It's just a hack my workflow time as I have to load my own brush singlely and if I load them all that I have to go through every single brush to find what I need.

  Thank you!

  I found a solution to my problem, it can help others! I run Windows 7 64-bit has two separate applications files when it is installed. I did a search of windows to one of the names of the available brushes on my right click list. The research showed me where were the brushes. (Example: I searched in windows: DP brushes) Aparently photoshop normally installs like a "32-bit" program at this location, C:\Program Files\Adobe\Adobe PhotoShop CS5.1\Adobe Photoshop CS5.1 (64 Bit) \Presets\Brushes that's where I copied my new brushes to and it showed again. Hope this helps someone who was in my situation!

• Network option just is not in the drop-down list under the definition of the property

  I have a vRA 7 installation and am trying to create a drop down menu option to choose VLAN while deploying VMS from the Blue Print.

  To do this, have created a property definitions as below.

  

  Then I had created a group of properties like below

  

  Then to Blue Print Custom property and added the Group of properties and property custom added the VMNetwork

  When I return to the catalog and deploy a new virtual machine can't see any vlan in the dropdown option menu.  instead I see the preset in the menu drop-down

  

  Why the drop-down list values Vlan do not come up instead of this the name value appears.

  If mistaken. any help appreciated

  Try like this:

  

  The property group is like the old building profile, a way to group several properties. You must specifically that he would do that.

  Grant

• Why acrobat pro XI is not displayed in the drop-down list to install?

  IM installing acrobat XI pro on a mac and it does not appear as a product option in the drop-down list to match with the serial number? It says serial number is valid but cannot see the product on computer. Yet, it is installed and has been saved.

  I went to http://www.adobe.com/au/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_softw are_sl_mostpopular_au.html

  Only upgrades cost a $ 282. To get the upgrade price, you need to select the product you already own.

  Full fare is $ 637.

  You will probably need to contact Adobe to pay off first purchase and convert it to full fare - but don't wait, there may be a time limit.

• Space Designer logic IRs are installed, but still not appearing is not in the drop-down list on interface Space Designer?

  Howdy,

  I use Logic Pro X 10.2.

  I can't load my Space Designer IRs logic on interface Space Designer via the menu drop down. IE - I CAN load IRs one by one manually by clicking on the button IR and trawling through my library of Macbook etc. and do it this way - but obviously this is not cool...

  It's where my Space Designer logic IRs downloaded by default:

  1. Users/garethebbs/Music/Audio Music Apps/plug-in Settings/Space Designer

  (2) users/garethebbs/Music/Audio Music Apps / Impulse Responses

  In the Handbook of the logic of the effects, it says "all impulse responses with Logic Pro are installed in/Library/Audio/Impulse Responses/Apple folder. Deconvolution files have an extension of file .sdir. »

  So I copied the IR files in there too.

  I don't have this folder below - I think not that it already existed on my Macbook Pro. But some people have mentioned that they have their IRs logic there:

  Library / Application Support / logic / impulse responses - so I put this folder and copied the IRs in there to try, but nothing happened, if I deleted again to return my computer to original settings.

  I also tried to copy in Library / Application Support / logic / settings of plugin / Space Designer, but this did nothing no more... so I deleted them back.

  The IRs only, who are actually working properly - IE, they show in the drop-down list Space Designer window (see photo) are some Lexicon 480 L IRs that I downloaded and according to the instructions on the site Web 3rd party, I put them in:

  / Users/garethebbs/Music/Audio Music Apps/plug-in Settings/Space Designer

  / Users/garethebbs/Music/Audio Music Apps / Impulse Responses

  (The IRs of logic are there too... but obviously, they do NOT appear with the lexicons in the menu drop-down). I also tried to install any other lexicons PCM90 without success. Tried all possible places.

  Just very frustrated at this point... any help would be greatly appreciated. I hope that my post is not too complicated... I'm quite confused myself at this point...

  Thank you
  Gar

  PIC - that's what I get when I click on the menu bar dropdown - as mentioned above, no IRs, any third party lexicons logic.

  

  In the Handbook of the logic of the effects, it says "all impulse responses with Logic Pro are installed in/Library/Audio/Impulse Responses/Apple folder. Deconvolution files have an extension of file .sdir. »

  It's okay...

  Note: This is the system library not library user... which is where I'm guessing that you have been looking for...

  Go to the menu bar of the Finder... Choose send, and then tap option go to the folder...

  Now, paste the following text in there and press return.

  / Library/Audio/Impulse Responses/Apple

  You should find all the answers there y...

  The user users folder /Music / Audio Music Apps / Impulse responses is for presets save you yourself via the drop down in the plugin itself... more all 3rd party presets... who could settle there...

• SendTo shortcuts do not appear in the drop-down list sendto

  I just have to move on to Windows 7 and the drop-down list sendto does not work properly.  I have consulted the folder sendto successfully by the username C:\"Users\Your '\AppData\Roaming\Microsoft\Windows\SendTo.  There are shortcuts and standard destinations that are not appearing in the actual drop-down list.  The only destinations referenced when right click and access the sendto method are the disk of the user and a sendto folder that places the documents to the location C:\"Users\Your username"\AppData\Roaming\Microsoft\Windows\SendTo.

  Hello

  Make sure that you are logged on as administrator.

  Start - type in the area of research-> shell: SendTo
  Press enter

  Shell commands
  http://www.SevenForums.com/tutorials/4941-shell-command.html

  =======================================================

  If necessary:

  You use professional, Ultimate, or Enterprise (part of a domain)
  where could be set in Group Policy (GPedit)? Antivirus/security, supposed
  refinement of public and other services could be the cause of the issue.

  Try to use a clean boot, and then check by removing and add a.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  ====================================================

  Other methods.

  1 follow these steps to remove corruption and damaged/missing system files that may have a role of repair or replacement, and it must be eliminated.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ------------------------------------------------------------------------------------------------

  2. troubleshooting questions Menu context (right click) are a process of eliminating exercise.

  Make a right-click is slow or weird behavior caused by context menus managers
  http://WindowsXP.MVPs.org/slowrightclick.htm
  and here:

  Manage the entries in the context menu for files, folders, disks, and objects in the Namespace
  http://WindowsXP.MVPs.org/context_folders.htm

  The ShellExView utility displays the details of shell extensions installed on your computer and allows
  easily disable you and enable each shell extension.
  http://www.NirSoft.NET/utils/shexview.html

  ShellMenuView is a small utility that displays the list of menu items which appeared in the context
  menu when you right click on a file/folder on Windows Explorer and allows you to easily disable unwanted
  menu items.
  http://www.NirSoft.NET/utils/shell_menu_view.html

  How to change or remove items from the right click Menu.
  http://www.WinVistaClub.com/E11.html

  =====================================================

  If you have exhausted these try a repair Installation that allows you to
  keep the programs and data, although redundant backups are always a
  good idea. It is less likely to help you if you have not used the above
  methods such as the same parameters and conditions exist.

  I hope this helps.

  I hope this helps.

• I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the ProX1 op

  I transferred X 1 pro overall to another PC, but opening I get the message "serial number you provided is valid but calling it a product was not found on this computer", the drop-down list of products responding to the does not contain the option ProX1.

  Hi Carl,

  It seems that you have installed Acrobat XI pro as an upgrade and an upgrade you will need a serial number for a product older Acrobat X, etc. 9:

  See, error: "this serial number is not for a product calling it" | Adobe Creative Suite

  Also, I checked with your Adobe ID on the forums and I can only locate XI of Acrobat pro upgrade recorded, please check if you have registered an earlier version of Acrobat on some another email to get this serial number.

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• Get the value of the drop-down list (selectedIndex) and the text field - does not

  Hi all

  I'm trying to find and change the values selected by the user using a drop-down list and text field. Here's the code.

  ChangeRevDetails();
  function ChangeRevDetails(){
  
  
            var myDialog = app.dialogs.add({name:"Enter copyright information"});
  
  
  //    var monthlist = col1.dropdowns.add('myList', undefined, myList);
  
  
            var col1 = myDialog.dialogColumns.add();
            var col2 = myDialog.dialogColumns.add();
    
      col1.staticTexts.add({staticLabel:"Month:"});
            col1.staticTexts.add({staticLabel:"Year:"});
      col1.staticTexts.add({staticLabel:"Rev. no.:"});
      
      var myList = [ "January", "February",  "March", "April", "March", "April", "May", "June", "July", "August", "Sepetember", "October", "November", "December" ];
  
  
       var myMonth = col2.dropdowns.add({stringList:myList, selectedIndex:0, minWidth:100});//{minWidth:100});
       var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});   
       var MyRev = col2.textEditboxes.add({minWidth:100});
  
  
      var RevMonth = (myList [myMonth.selectedIndex]);
      var RevYear = myYear.editContents;
      var RevNumber = MyRev.editContents;
      var RevToReplace1 = RevMonth +", "+ RevYear;
      var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
  
  
      var myResult = myDialog.show();
  
  
          if(myYear.editContents == "") //entry is "" 
          { 
          alert("Please enter some text into the contents field."); 
          ChangeRevDetails(); 
          }
          else if(myResult == true) //user entered datas 
          { 
  
  
              alert (RevMonth);
              alert (RevYear);
              alert (RevNumber);
              alert (RevToReplace1);
              alert (RevToReplace2);
  
  
              app.findGrepPreferences = NothingEnum.nothing;
              app.changeGrepPreferences = NothingEnum.nothing;
  
  
              // grep find/change
              app.findGrepPreferences = app.changeGrepPreferences = null;       
              app.findGrepPreferences.findWhat = "[\\l\\u]+?\\s?\\d{4},?\\s+[\\l\\u]+\\.*\\s+\\d+";
              app.findGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
              app.changeGrepPreferences.changeTo = RevToReplace1;
              app.changeGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
              app.activeDocument.changeGrep();
  
  
              app.findGrepPreferences = NothingEnum.nothing;
              app.changeGrepPreferences = NothingEnum.nothing;
    
      } 
      else //implies user clicked cancel 
      { 
      myDialog.destroy(); 
      }
  
  
  }
  
  

  The problem is, it does not take the value that the user selects in the drop-down list and the text field. It takes the default value as "January" and the year is '2013' as these two values are given as selectedIndex:0 and editContents: "2013". I compared the coding with a few other scripts work as well, but it does not work. I added several alert boxes to check the value we get.

  In addition, search for it and change also does not work. Please help me on this. Thank you.

  Kind regards

  Bachi. D
  

  Change the order of dialogresults:

  ...

  	var myYear = col2.textEditboxes.add ({editContents: "2013", minWidth:100});})
  	var MyRev = col2.textEditboxes.add({minWidth:100});)

  Ditto var = myDialog.show ();

  	If (myYear.editContents == "") //entry is «»
  	{
  	Alert ("Please enter a text in the content field.");
  	ChangeRevDetails();
  	}
  	else //user entered if(myResult == true) datas
  	{

  	var RevMonth = (myList [myMonth.selectedIndex]);
  	var RevYear = myYear.editContents;
  	var RevNumber = MyRev.editContents;
  	"var RevToReplace1 = RevMonth + ', '+ RevYear;
  	"var RevToReplace2 = RevMonth + ', '+ RevYear + 'Rev' + RevNumber; ...

  did not have a look for the problem of change to find

• Why don't point in the drop-down list address not remove when selected and click on remove

  on version 14.1 - to remove an item in the drop-down address, said the point the address line the right click and select delete - this clears the address line but point remains in the drop-down list and does disappear not - why point unclear when you return to fall down to check this

  the system is XP and ff 14.1

  I think that you need for the arrow down to the element, so it is highlighted, and then press DELETE.

  (I meant the keyboard delete key, you can't right click on the drop-down list).

• What happened to the drop-down list next back and forth Often I want to go back two or three pages in a single jump, don't not clicking back, back, back!

  as the question says

  The drop-down list marker was removed from the Back/Forward button in Firefox 4.

  You can do one of the following:

  • Click the previous/next button to display the drop-down list
  • While on the front/rear button, HOLD down the mouse left click pressed until the drop-down list is displayed
  • install this module to add the marker drop-down list on the previous/next button: https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/

  You need to update the following:

  • Adobe Shockwave for Director Netscape plug-in, version 11.0
  1. Check your plugin versions on one of the following links:
     • http://www.Mozilla.com/en-us/pluginCheck/
     • https://www-trunk.stage.Mozilla.com/en-us/pluginCheck/
     • Note: plugin check page lacks information about all versions of the plugin
     • There are links to tests specific plugin available on this page:
       • http://KB.mozillazine.org/Testing_plugins
  2. Update to Shockwave for Director
     • NOTE: this is not the same thing as Shockwave Flash; This installs the Shockwave Player.
     • Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place, so you can find it).
     • When the download is complete, exit Firefox (file > exit)
     • Locate and double-click it in the installer that you just downloaded, let the complete installation.
     • Restart Firefox, and look at your plugins.
     • Download link and more information: http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox

• Trying to save in Jpeg, but not on the drop-down list of choices

  I want to share this file to a jpg file, but is not on the drop-down list of options.  That's happened?  Where the jpg option and why it is not on the list?

  

  File > export > export as.

• Win 7 should go deskjet 970cse on network... not in the drop-down list on win 7.

  I have a new win7 networked system.  My deskjet 970cse is on my network, controlled by a system of xp.  I saw directions making the printer to add, use the local port, provide the name of network etc.  However, at the end of the day, I have to choose which printer... and HP 970cse is NOT on the drop-down list.  Help please.

  Make sure that Windows Update is enabled as shown in method 2 here, then install the driver as described in the another thread you asked this here.

• I turned on my PC today and I did not "PRINT" option when I go to the drop down "FILE" menu... totally gone... Could someone please advise me how to recover?

  I turned on my PC today and I did not "PRINT" option when I go to the drop down "FILE" menu... totally gone... Could someone please advise me how to recover?

  Thank you for your comments... I guess it is the restoration of the system for me!

• I downoladed and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do

  I downloaded and tried to install CS6 on my computer after that machine has been upgraded to Windows 10.  I get a message that says "serial number is not for the product." The drop-down list does not contain CS6 Design and Web Premium.  What should I do to get loaded and enabled on my computer?

  That fall down, and the serial number you provide must identify the previous version that you upgraded because CS6 is an upgraded version in your case.

  Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-qualifying-product.html

• How can I change the automatic country setting that is displayed in the payment gateway billing address? There is only one country in the drop-down list, not my current country

  How can I change the automatic country setting that is displayed in the payment gateway billing address? There is only one country in the drop-down list, not my current country

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -html http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id.