If someone phones and say u computer year is full of virus and says he can fix at the top of the computer it is scam

Similar Questions

• Windows install the latest updates on my phone and now I can't access the internet

  Windows Installer automatically of updates on my computer and now even if the system connects to the wireless network and I have only local access he has no internet access.  I tried both with the wired and wireless options and nor will not work.  Everything worked fine until the update system - do not know if I have to do a system restore to when he installed updates (I tried to restore to a point a few days before the download, but it failed) or if I should try to uninstall updates.  While I am not very confident with the work on the computer would like some advice on the best way to go.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Problems with system restore:

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  1. If you use Norton (Etc), disable it before using System Restore. info at the link above.

  2. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  3 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows\System32\LogiLDA.dll what is this file and I need this file? The message says it can't find the module.

  What is this file and I need this file? The message says it can't find the module.

  Hello

  You have recently uninstalled software Logitech?

  Follow the steps in the solution here:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/specified-module-could-not-be-found-logildadll/9c227c15-D0D6-4e24-946f-ac0dbbbb10d1

• With the help of Excel, the zero in front of the fixed phone and GSM disappears after moving to the next cell

  Make a list of phone numbers in excel. The zero in front of the fixed phone and GSM disappears after moving to the next cell. Any advice? Worked before excel on request, so the knowledge base only. Thank you. L. H.

  In addition to advice of GTS - NJ, who will work, you can put an apostrophe before the zero and it will cause zero to keep.   Instead of enter 0123, enter "0123.

• I can't connect to creative cloud, and so I can not install the Photoshop account I paid for.  I changed my ID adobe several times, but I can't connect to creative cloud, he always says I have the wrong password.  Help, please. Thank U

  I can't connect to creative cloud, and so I can not install the Photoshop account I paid for.  I changed my ID adobe several times, but I can't connect to creative cloud, he always says I have the wrong password.  Help, please. Thank U

  Hello

  Please contact the support.

  Contact the customer service

  Concerning

• I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR

  I just looked at problems with importing files from nikon D810 in LR 5.7 it pop a window saying it can't read the files to work on an imac 27 "yosemite on my mac pro running after several times he finally managed to read files and import them into LR, I never had this problem before there was a sort of update that could from cause?

  What is the destination folder that the date be underneath?  In the top right it says users who suggests, you try to put the photos on top of your username instead of under your username.  Maybe that's the problem.  So change your folder in the drop-down list at the bottom right of what it should be rather than users, and if you're going to show us the destination of your photos at least scroll through the list of folders down right so that we can see which is the white highlight.

  Here is how mine looks like if I want to put my photos imported under my subfolder users - Steve - photos by date:

  

• I have not changed my settings of the computer, I didn't accept the offer of update of Firefox and NOW I can't play the video, my music site subscribe to wonder of

  I took the opportunity to update firefox last week (June 9, 2012) and now I can't play the video, I subscribe to a site of learning music and he asked to upgrade me to the latest version of Flash, now I did and my videos still won't play If I use Chrome, I have no problem, Firefox has ruined my system HELP.

  Confirm the Adobe test page that Flash is installed?
  Update the Flash plugin to the latest version.

  • http://www.Adobe.com/software/Flash/about/
  • http://helpx.Adobe.com/Flash-Player.html

  You can find the latest version of the Flash player for Firefox on this page.

  • http://www.Adobe.com/special/products/flashplayer/fp_distribution3.html

• I'm unable to connect to the internet and I also can not use the WinXP system restore.

  No internet connection and I also can not use the WinXP system restore because it gives me an error at the 'end' which said: it cannot be restored to an earlier date.  I run AntiMalware bytes and StopZilla and erased all that they found.  Now I can't even connect to the internet.  When I go to the command prompt, it gives me an error contact the Support of MS that I know means I have a virus or a trojan that I should just get a time out?  My other PC on the same network is fine and connected.  The NETWORK card is fine, just does not know how to get rid of what it is, I have and to top it all impossible to connect to the internet to try all of the tools that can help.  Someone at - it ideas?

  The error you get at the end of the restoration of the system is typical of some anti-virus programs (Norton, especially) that interfere with the restoration of the system.  Try to start your computer in Mode safe (on several occasions, key to tap F8 while your computer starts) and run safe mode system restore.

  Additional information is necessary to treat your network problem.  Try to bring up a command prompt (start-> Run-> "cmd") or if it does not, try (start-> Run-> "command.com") and enter the command:
  ipconfig/all
  and after the info that appears in the State resulting.

  Also, check the logs of your system related errors (start-> Run-> "eventvwr.msc") and click on 'System' in the left column.

  HTH,
  JW

• I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  I plug in a device after I installed the drivers from the USB says windows can't recognized the device what should I do to solve it.

  Hello

  I suggest to go to the link below and run the fix tool provided or follow the manual procedure provided to solve the problem.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  You can also check the below link for more information about advanced troubleshooting tips for General USB in Windows XP problems.

  http://support.Microsoft.com/kb/310575

• After Encrypting files, I had to reinstall my windows and now I can not decrypt the file

  * O.T. > encrypted files

  So after encryption of files I had to reinstall my windows (changed the name of the owner) and now I can not decrypt the file

  After attempting to decrypt the files, I'm promped with this message:

  Attribute application error

  An error occurred applying attributes to the file:

  driveletter\filename

  Access is denied. \

  I want to say that I added my administrator name in the Security tab, and then gave me full control over the files, but that did not work.

  Hello

  I understand that you cannot decrypt files previously encrypted in Windows 7 after you have reinstalled Windows.

  • What program did you use to encrypt the files?

  From now on, I would ask you to refer to similar questions discussed in the thread below links and check the status.

  Cannot decrypt previously encrypted files

  I'm unable to decrypt files encrypted after reformatting the hard drive.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• I can't open my camera of withdrawal because it asks to format when inserted, but when format us windows says it can't complete the format

  I can't open my camera of withdrawal because it asks to format when inserted, but when format us windows says it can't complete the format

  This problem is usually caused by

  1. problem with the connecting cable
  2. the problem with USB port
  3. problem with the device itself.
  I suggest you try changing ports and cable. If this does not work, the problem is with the device only.
  In addition, note that the option to remove is not necessary to be used if you use Windows XP or a higher version of Windows and the device has an indicator of activity.
  
  As you can see, most USB storage devices are configured for the fast-moving, which means, no need to use the option remove safely. If you are sure of a use, for example, a file transfer operation is complete, you can remove the device directly.

• I am DollarPhoto Club, I am from Brazil and one I can't find the US $0.99 promotion by imagem. Pls Help?

  I am DollarPhoto Club, I am from Brazil and one I can't find the US $0.99 promotion by imagem. Pls Help?

  Hello

  Unfortunately we do not currently sell Stock to the Brazil.

  Please refer to the FAQ for more information: Dollar Club Photo - photo galleries free high quality royalty and vectors - Club picture Dollar

  There is a special offer on Adobe Stock?

  Yes, good news! If you are a member, you get an incredible reduction on Adobe Stock *:

  • $9.99 per month for 10 images per month for 1 year
  • Additional downloads will cost $0.99 during the promotion

  In addition, all your unused Dollar Photo Club downloads will be automatically transferred to Adobe Stock.

  Please note that unused downloads transferred to Adobe Stock will be valid for 1 year, and only after 1 year unless you cancel, your subscription will be charged at the standard subscription rate.

  * Note that Adobe Stock buying is not possible in some countries,. However users in these countries can always transfer their unused Dollar Photo Club downloads and creative resources to license Adobe Stock with these downloads. Note that unused downloads transferred to Adobe Stock will be valid for 1 year.

  Sign in to your Club picture Dollar account to discover the conditions.

  Thank you

  Bev

• I paid to have access to Photoshop, and now I can't open the app.

  I paid to have access to Photoshop, and now I can't open the app. He says I need to repurchase or serial number code, that I have received. I downloaded the app and it won't let me.

  I just want to make a f * king photo. Jesus christ is so easy to use

  cbrehmes

  Make sure that you have signed with correct email address

  Sign out, sign in | Creative cloud desktop application

  If the e-mail address is correct, then I suggest refer you your guests entered the file once.

  You can see the steps on

  Log, activation, or connection errors. CS5.5 and later versions

• What does this message and how I can fix? "There is no disk in the drive. Please insert

  What does this message and how I can fix? Thank you.

  "There is no disk in the drive. Please insert the floppy into \Device\Harddisk2\Dr2.

  Hiking Abes

  Important information... what version of Premiere Elements you are using and on what computer operating system is running.

  If your question is really tied to SmartSound installation, then...

  It considerations important installation first elements 11 Smartsound

  http://helpx.Adobe.com/premiere-elements/KB/installing-SmartSound.html

  It when you enter the program

  http://www.SmartSound.com/support/link.php?ID=308

  I do not see these links included in John T. Smith link towards a solution, so I am supplementing with the foregoing.

  Please let us know the result.

  RTA

• Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  Not fully functional mouse with MacBook Pro 2010. I can scroll up and down, but can not move the cursor.  The mouse works with my new Macbook 12. No mouse problem but Macbook Pro?

  What specific mouse?