Similar Questions

• When I type a url, as soon as I hit the back, the text is covered by a black bar that makes the invisible url how can I get rid of this?

  When I type a url, as soon as I hit the back, the text is covered by a black bar that makes the invisible url how can I get rid of this?

  Could you check this thread started by another user of Linux and see if that helps:

  How can I stop firefox ffrom blocking URLS

• Restore the iPad App via Time Machine?

  Let's see if I can explain it clearly without writing a novel...

  We used iBank on a series of iPads in Quicken replacement.  iBank was wonderful.

  A few days ago, we decided to accept the upgrade to the new version of the App.  The upgrade has changed the name of the application of Banktivity 5.0.3.

  After the update the app is more responsible, is back with ' an error occurred during the migration of permanent storage' and when we hit OK you get the spinning wheel of death, eternally.  Fearing yet another Apple HW question I made the mistake to immediately an iPad manual backup because I did not know when the last of them automatic was and I didn't lose anything else on the iPad.

  The iPad is running 9.3.1 model number MD516LL/a H/W.

  We have iTunes to save 'automatically' iPad 'to this computer.  We do not use the cloud.

  I had an exchange of mail with the support of the IGG, but when we walked in the restoration of a previous automatic backup on the iPad, they were out of their depth.  I have no complaint with their support, they do not know where are stored the backups or how to proceed.

  So, that's where it gets interesting/frustrating.

  I try to use Time Machine to restore the App from a previous version in iTunes and then sync to iPad.

  I do not see the backup files to iPad specific laptop I use for backup "automatic" iTunes "to this computer.  I see the list of applications on the iPad iTunes in the ' users > Shared > iTunes > directory of Mobile Applications.  I'm going back in time in Time Machine to find the last backup the previous version of iBank has or Banktivity iTunes before 5.0.3... in the hopes of restoring just that specific app and data...

  ... Previous Time Machine backups have iBank or Banktivity listed in the applications!  I have looked far and sought to my heart's content, but none are here.  All other applications will appear in the list, but not iBank or Banktivity.  Now, I'm stumped... Why would not appear anywhere in the last backups?

  Having lost all historical and current in the iBank data are a pretty big disaster if I don't want to take the risk of ruining more by doing a partial or full restore iPad without understanding why the previous of iBank versions and/or Banktivity do not appear in the lists before the last manual of Time Machine backup?

  The iPad is an ideas, thoughts or suggestions would be most appreciated.

  Real applications are not stored in the backup (which contains the content of applications, your settings, documents, photos etc), restoration (backups are stored in ~/Library/Application Support/MobileSync/Backup/on a Mac, a backup is not designed to be readable by the user) would look to pick up the application of the section My Apps from your iTunes library - so looking for a old backup iPad in Time Machine won't help your find the app.

  As to why the app does not appear in your Time Machine backup of your folder "Mobile Applications", looking for the correct name of the application (the name that shows in your iTunes Apps my chapter cannot be the same as the file real .ipa computer/time Machine; some of my friends have very different names)?

• can I view all the bookmarks of all time next to my home page, as the old windows 2003 could, I now have windows 7 & firefox 4. I love being able to see all my favorites all the time.

  can I view all the bookmarks of all time next to my home page, as the old windows 2003 could, I now have windows 7 & firefox 4. I love being able to see all my favorites all the time. Edit

  Just hit CTRL + I

• Photos wants to import the same photos every time.

  Whenever I have connect the iPhone 6, most to the iMac, Photos opens and lists the pictures that have not yet been imported. However, many photos in the list are old photos that supposedly already have been imported. These same pictures appear in the import list every time. Their import * one-more-time * does not help. They reappear next time, too.

  How can I get pictures to stop posting the photos already imported? Or are these pictures this importing Photos cannot but is too shy to say it?

  report this Apple

  http://www.Apple.com/feedback/photos.html

  LN

• Browse the contents of the hard disk of the target in real time

  Hello

  Is there an easy way to browse the content of the hard drive on a real-time target by using the file path control (or another type of control)?

  What I have in my application is a PC real-time desktop (running on PharLap) who has a Main.vi running on it. There are a few configuration files (for this VI) I want to be able to read and record to that would be stored on the hard drive of the target in real time. However, when the application runs and I hit the Browse button, it displays the contents of the Windows machine and not the machine in real time. Is there something I'm missing?

  Please note that I can send via FTP on the Windows computer to the target in real time and can interact with the drive of the target in real time without any problem.

  Thank you.

  Mike

  If you LV 2013 actually use WebDAV screws thus:

  http://digital.NI.com/public.nsf/allkb/4EBE45E8A816B19386257B6C0071D025

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvcomm/WebDAV/

• I installed the printer coupon several times but every time I want to print, nothing happens.

  original title: Coupon printer

  I installed the printer coupon several times but every time I want to print, nothing happens.  I followed all the instructions, but when the coupons are supposed to be sent to my printer that they do not print.  What can I do?

  Hello

  If you have problems with the software or hardware contact their manufacturer for appropriate assistance

• Secondary HA failover of the server URL does not

  Hi all

  Ive set up a Foglight HA environment but I keep having a problem getting the fail URL to work.

  e.g. the IP address of the primary server 10.10.10.1 (active)

  When I type the IP address in the browser to test whether it will redirect to the primary server (active), he gives a page cannot be secondary servers display message.

  Can some please help?

  Concerning

  CM

  Is this also the case if you primary fails?  If the primary is in place and running the day before may be not accepting connections.

  Check this box

  https://support.quest.com/SolutionDetail.aspx?ID=SOL46114&PR=Foglight

  46114 knowledge article

  RSS subscription

  close

  The solution that you want to subscribe covers a number of software products from Dell. Please choose the one that is of primary interest;

  
   

  Foglight

   
  • Return

  • Title

    In a Foglight HA installation what URL you hit to access the console?

  • Description

  Question: In a high availability installation Foglight what URL you hit to access the console? You have to know which server is primary and hit this one, or if the server goes down you are automatically redirected to the correct FMS?

  • Resolution

  Answer: You need to hit the URL of the primary there is no common URL. Using a proxy is the way to give users a common URL and automatic redirection in the event of failure of the primary.

  and this

  http://eDOCS.quest.com/Foglight/567/files/FoglightHighAvailability_Field.PDF

  "Mode high availability is a configuration of multiple Foglight management servers in a cluster where a Management Server is the primary server and the others are backup servers. If the primary server stops responding, one of the servers in the cluster HA standby takes over the responsibility of monitoring. HA mode uses redundancy and failover to ensure that Foglight monitoring continues without interruption. "

  Golan

• Generate class files using the WSDL url and wsimport

  I am trying to create a java application that hits the service exposed by hub.

  To create the application in java, I'm generating class files using the WSDL that is created and exposed by the hub.

  Executed steps:

  1 created an application in OPA.

  2. deployed on the hub (usinf deploy option of snapshot on Policy Modeling)

  3. in the deployment tab, I see the request and get the url of the wsdl by clicking on it.

  I try on this wsdl wsimport command. But it gives me following error messages.

  ---------------------------------------------------------------------------------------------------

  C:\***\AllFiles > wsimport http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL

  the analysis of WSDL...

  [ERROR] invalid WSDL http://localhost:7001/hub/determinations-Server/assess/SOAP/generic/12.2/AttemptOne?WSDL , expected {http://schemas.xmlsoap.org/wsdl/} html (line 2) data definitions

  Cannot read the WSDL document: ( http://localhost:7001/Hub/determinations-Server/assess/SOAP/Generic/12.2/AttemptOne?WSDL , because 1) did not find the document. (/ 2) the document could not be read. (3) the element the document root is not < wsdl:definitions >.

  [ERROR] WSDL:service is not found in the WSDL (s) provided:

  At least a WSDL with definition of at least one service must be provided.

  Unable to parse the WSDL file.

  ---------------------------------------------------------------------------------------------------

  If I store the wsdl file in a file on my local computer, and then run wsimport, it generates the classes very well.

  Can someone provide me with a way that I can generate the classes using the wsdl url and not the local file?

  Also, do I need to create a connection in the Connections tab on the hub?

  Thanks in advance.

  -Alain

  Looks like you could run in the user authentication when wsimport runs against the WSDL. Instead of the WSDL, its reception, the login page.

  The best way to work around this problem is perhaps what you do already - to obtain the wsdl and save them in a file.

  Another solution is to disable the restriction of connection to the Web Service API. You can do this in the menu on the users page (admin role can turn on and off.

  You can switch between a user and a password with the call of the WSDL file, but I don't know if its possible to do with wsimport

  See you soon

  Frank

• How to get around the impossibility of real-time preview?

  I don't know if it's just my hardware, but I have no idea how I'm supposed to change anything when I can only pre-made 15 seconds of images at once and then the rest after that it's extremely slow. Someone at - it advice?

  Are you relatively new to work with After Effects? 35 seconds is a long time for AE something read. AE is not designed for this sort of thing. Remember what I said previously about creating AE vaccines. AE is really designed only to make some shots. It's because she works with completely free video compression internally which is equivalent to about 1 to 2 GB every two seconds. To get a more updated preview cache, you need more RAM or to take suggestions of Rick to AE for caching the longer segments of time. Alternatively, you should be able to get a glimpse of your computer as long as you do it in increments of 30 seconds and just work your way down it a little at a time.

  Now, if you try to get the text aligned with the audio signals, you can consider getting audio playback only until you find the place you work.

  Otherwise, use text animation models created in After Effects inside Premiere Pro: How to use templates Live text of After Effects in Premiere Pro

  First is more oriented for a long time read since it reads just a video stream (in contrast to the AE).

• The ABS function and the sum at a time

  <? If: sum (ARCH_AMT)! = '0' ? >
  
  We used above condition in the model to restrict the data to date, but we were faced with a new problem when ARCH_AMT is to have several lines with the same amount but + ve and ve - that is to say 500, -500, is the sum and do not return data given that the sum would be zero.
  
  We do ABS (ARCH_AMT) before making the sum that the SUM will be thousand and data will be collected.
  
  Please suggest how can we have ABS and the sum at a time
  
  I tried
  
  <? If: sum (ABS (ARCH_AMT))! = '0' ? > and also choose the conditions and it does not work.
  
  Thanks in advance.
  
  Kind regards
  Mahi
  
  Published by: mahi4luck on March 28, 2012 02:33

  store ABS (ARCH_AMT) in a variable and use this variable in a total cumulative

  example:
  Suppose I have a structure xml like this:

  
  
  -500
  
  
  500
  
  

  
  

  
  
  
  

  Total:

• Adobe Media Encoder to Premiere Pro CS4 stops working on the same frame every time...

  Currently, I have Adobe Premiere Pro CS4 and have never had these problems before export. My calendar is less than 3 minutes long, but it deals with several large files. He made perfectly and it plays perfectly in the timeline. When I try to export using Media Encoder, however, it freezes at the same frame every time (which is actually a few seconds in!) then exit breaks down, while I force. I tried to export as many different codecs and the problem persists... same frame. I tried to create a new project from scratch and whisk a few titles and export that to see if it's just export anything. The new project exported very well, however, which I suppose is good news. But yes, my work on this project is very important for me and I reallllly want to export it. Help, please!

  What are the details of the alleged audio file?

• I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and they told me not to upgrade a third time.  Can I update or not and why?

  I have a macbook pro 2010 and already have updated twice.  Should I move a third time?  I was in the apple store some time ago and I was told that I should not upgrade again.  Can I update or not and why?

  Upgrade what to what? We don't know what you're asking. Writing an effective communities of Apple Support question.

• Too late to correct the episode URL?

  I have a problem with a podcast episode, I found out a week later the episode URL was wrong. I corrected the link in the podcast codes. But he is still unable to download podcast software. Is it too late to correct the podcast URL when the subscriber devices downloaded codes for a new podcast?

  Remove the episode with the wrong URL, and then do a new episode with the same descriptions and the correct URL. If the 'guid' tag is not taken from the URL, make sure that it is different from the one in the deleted episode.

• How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  How can I disable the newtab most used feature display sites. I want the new tab to open the page displayed in the newtab:url in the topic: function config

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the extension classic restaurateur theme: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/

  Setting up substitute again tab

  After installing this extension, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab override and click the Options button. (See first screenshot attached).

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Success?

  Once you have set it as you wish, you can close the Add-ons page (or use the back button to return to the list of Extensions of this Options page).