IFmsNotifyAction: the long string arguments get corrupted

Similar Questions

• My files on the hard drive are getting corrupted?

  I use the model of MacBook Air 2013 Yosemite running. I have a Seagate BackPlus 1 TB drive to NTFS. And I use Tuxers NTFS on my Mac to read and write files from NTFS devices. Lately, I'm sloly from knowledge that my files on the hard drive are getting corrupted. When I try to open any folder I blocks until I have remove my hard drive. I lost some files like this. Now, they are completely inaccessilble. The big sone files show even ehen 0 bytes, they are around a GB or something. I start out freak because all my data is in this hard drive. 1 TB of data. Its my life is locked in it.

  Is someone can you please tell me what is happening with my hard drive?

  Thanks in advance...

  Is someone can you please tell me what is happening with my hard drive?

  Probably not. The problem you are experiencing is almost certainly that the drive itself has failed. It could have also been caused by third party software that you use to support a formatted NTFS volume. Isolate the cause to one or the other is probably not an effort worth it, because the files themselves are probably already damaged and unusable. In this case the only alternative to certain to succeed is to restore from a backup.

  As you know the Mac FAT32 and ExFAT supports and can read, but not write - formatted NTFS volume. For this reason, if you ask the Windows compatibility, you must select ExFAT.

  You could try using the third-party data recovery software, even if success is not guaranteed. I can offer no specific product recommendations.

• How to retrieve the database SYSTEM datafile get corrupted?

  Database is in ARCHIVELOG mode, and the system tablespace data file is corrupt. Until when can I recover the database?
  
  A. until the last commit.
  (B) until the moment where you are recovering.
  (C) until the moment when the data file has been corrupted.
  D. you may not recover the SYSTEM tablespace and you must be re - create the database.
  
  
  --
  and 1 more doubt:
  
  If redologfiles are not multiplexed and blocks redolog get damaged in Group 2, archiving stops and. All redolog files are filled and database activity is interrupted.
  DBWR wrote everything on the drive. What command allows you to go further?
  
  A. retrieve the block logfile Group 2;
  B. change the database drop logfile Group 2;
  C. change the database group claire logfile 2;
  D. change the group database recover logfile 2;
  E. change the database clear no archived lofile Group 2;
  
  Published by: user642367 on September 18, 2008 20:45

  1A. Because the DB is in archivelog mode, so you can always restore and recover the entire DB including system tablespace datafile to latter YVERT generated provided that redo record is available in in line/Archives log files.

  2 E. Because only redolog corrupt archive so only proceed where a blockage of the db is obvious, then, in order to proceed further you must clear (a journal archived file) online and then db will work as usual. There you must take a full backkup of DB (cold backup insofar as possible) as soon as possible after the issuance of this order. Like now, you do not repeat information in the archivelog files to recover the db in case of crash.

  Please go through Oracle 10 g DB Administrator's guide (available on OTN) for more details.

  Thank you

• How to send the long string of CFCs without error?

  I posted a different question on this subject, but maybe it was worded too complex, because no one answered. Is there anyway to get a large amount of text in a cfc? If I put in a string of javascript and try to send it, I get a URi too long because the function is transformed into a http GET method and transformed in a url string which obviously does not work because of the limit on the length of the URi.
  
  Any ideas? A way to call a cfc without using a get? This has been hesitating to my mind for days now - it seems to me there should be a way to get long chains of a cfc. Right? Isn't it? I hope so!! ;)
  
  Thank you
  Dave

  I found the setHTTPMethod parameter used during initialization of a cfc to cfajaxproxy - you can change it to a POSITION which obviously solves the problem. Adobe, mark POST by default as AJaxCFC, CFAjax, etc.! Maybe theres some reason to have default GET, who knows...
  

• The characters UTF-8 get corrupted in the HTTP request

  I use the following code to read the response HTTP of Mongo DB to Oracle table. Some parts of the source (of type json) is received in Chinese are corrupt. The line

  DBMS_OUTPUT.PUT_LINE(buf);
  

  displays these corrupted values.

  FUNCTION FN_READ_CONTACTS_MOB (p_id in number) RETURN NUMBER
  IS
  OracleBatchNumber number := p_id;
  buf NVARCHAR2(32767);
    l_param_list     VARCHAR2(512);
  
    l_http_request   UTL_HTTP.req;
    l_http_response  UTL_HTTP.resp;
  
    l_response_text CLOB;
    
  BEGIN
   DBMS_OUTPUT.ENABLE(1000000);
    -- service's input parameters
  UTL_HTTP.SET_WALLET('file:C:/app/', 'manager1');
    -- preparing Request...
    l_http_request := UTL_HTTP.begin_request('https://api.appery.io/rest/1/db/collections/Outlet_Details?where=%7B%22%24and%22%3A%5B%7B%22Oracle_Flag%22%3A+%22Y%22%7D%2C+%7B%22OracleBatchNo%22%3A+%22'||OracleBatchNumber||'%22%7D%5D%7D'
                                            , 'GET'
                                            , 'HTTP/1.1');
  
  
    -- ...set header's attributes
    UTL_HTTP.set_header(l_http_request, 'X-Appery-Database-Id', '53f2dac5e4b02cca64021dbe');
    --UTL_HTTP.set_header(l_http_request, 'Content-Length', LENGTH(l_param_list));
  
    -- ...set input parameters
   -- UTL_HTTP.write_text(l_http_request, l_param_list);
  
    -- get Response and obtain received value
    l_http_response := UTL_HTTP.get_response(l_http_request);
  
  --using a loop read teh response, as UTL_HTTP.read_text hat returns the result as a VARCHAR2 (max 32767) (you have an implicit conversion here).
      BEGIN
        LOOP
          UTL_HTTP.read_text(l_http_response, buf);
          DBMS_OUTPUT.PUT_LINE(buf);
          l_response_text := l_response_text || buf;
        END LOOP;
      EXCEPTION
      WHEN UTL_HTTP.end_of_body THEN
        NULL;
      END;
  
  
   .....
  

  When I run the following:

  select value from nls_database_parameters where parameter='NLS_CHARACTERSET';
  

  and he returned: AL32UTF8.

  does not mean that my DB is set to UTF - 8? or there are other things need to be checked for this pupose?

  It seems to me that the answer conatins no content-type header.

  Maybe the link below will clarify the issue:

  https://docs.Oracle.com/CD/B19306_01/AppDev.102/b14258/u_http.htm#i1027267

• I get corrupted files indexing whenever I have access directly to the files on my system.

  I installed Windows 7 on a partition of a raid 0 with Windows XP on a second partition as a dual boot. The installer went well and all the drivers seem to work well. It seems anytime access to files via windows Explorer, my computer, etc., the indexing of files get corrupted. The system detects corruption and upon reboot it travels the disk repair utilities and deletes several files indexing, that it says are corrupt and the cycle goes round. I disabled the indexing on all partitions file and the problem got better but I still occasionally run the disc scan and correct indexing errors more. Everyone knows about this problem?

  Hi clonemark,

  Thanks for the reply on the community forum.

  Have you run any disk hard diagnosis tools that your hardware vendor can provide?  Initially, it sounds like there may be some bad sectors on the disks themselves hard.  If your system is under warranty, you may contact your provider and walk through a test of health with them.  If this is not the case, they have a tool on the site to help you with this.

  Don't forget a RAID 0 provides no redundancy so if any disk fails, without a State of full system / or all of the files you want to back up you are in danger of losing everything.  I want to make sure it is before much more is done, please make a good backup of all the data that you consider to be important for you on this system.

  In addition, if the material is not corrupted.  Check if the table that you created is corrupt.  Errors that you are declaring seem to indicate somewhere in this - table of data or hardware is damaged.  If chkdsk runs and can't find any error then it would be not significant to this procedure, but chkdsk running and to find errors, this is what is worrying.

  After checking if the material and the table are healthy, start in a clean boot state.

  Step 1: Perform a clean boot - this comes from an article in Windows Vista, however, the procedure is the same.  Don't forget to follow step 7 of this article, after the troubleshooting steps are made - http://support.microsoft.com/kb/929135 Note if the computer is connected to a network, the network may be policy settings prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. Log the computer by using an account with administrator rights.
  2. Click Start
     

     , type msconfig.exe in the box start looking for and then press ENTER to start the System Configuration utility.

  

  If you are prompted for an administrator password or for confirmation, type your password or click on continue.

• On the general tab of the , click on selective startup of , and then click to clear the load startup items check box. (The box use the file Boot isn't available.)
• Under the Services tab, select the hide all Microsoft services checkbox and then click disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

• -Click OK and then click Restart.
  

After you restart your computer follow these Rummy to run chkdsk.  This should stop the procedure was running and bringing only to run in your previous post.  Run chkdsk until more no error is detected.  Then the run once more to verify it shows always 0 errors.

If you still experience the problem, and all the steps listed above have been verified, run a tool to remove malware and VIRUS SCAN on all partitions in your operating system.  Check that there is no software of thugs on the system.

Let us know on this question of how things progress.

Kind regards

Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

• When I use it; (semicolon), the character string, do not indent!

  Suppose that we have any string of characters within a text block:

  asldfjalksdjflkajsfdklasfd

  If the string does not match inside the text block and the setting is checked in the paragraph Panel, will the string for examples:

  asldfjalk-

  sdjflkajs-

  fdklasfd

  Now suppose this character string inside, there are; (semicolon):

  asldfjalk; sdjflkajsfdklasfd

  now on the string do not hyphen, if the text block is too small, it disappears and a red sign as usual appears at the bottom right of the text frame. So I have to enlarge the text block to display the entire string of characters and, if the block of text outside the borders of the page?

  Can someone help me solve this problem?

  Hi Henry,.

  How many times this will happen with the copy that you have?

  If it's only an opportunity, then you can simply insert newline forced according to the needs.

  You put in a jump line by placing the cursor where you want to pause, and pressing SHIFT + return.

  In addition, if cannot see the text because of the long string (all see you is the Red sign on the block of text), select the block of text and press ctrl-y (cmd - y on mac) to open the copy in the story editor. Insert the line break, if necessary, and the copy will appear in the text frame.

  I hope this helps!

  See you soon,.

  ~ Nate

• Hi I have just signed up for the Apple's music and I forgot to cancel my game from itunes (it is no longer needed) who crossed just automatically - how to cancel the game and can get a refund?

  Hi I have just signed up for the Apple's music and I forgot to cancel my game from itunes (it is no longer needed) who crossed just automatically - how to cancel the game and can get a refund?

  To stop renewing, login to your account (for example by tapping your id settings > iTunes & App Store on your iPad, or by clicking on your name / icon to the top right of the iTunes on iTunes on your computer screen), and go to the iTunes in the cloud Section - see to halfway down this page: subscribe to iTunes game - Apple Support

  In terms of refund, try to contact iTunes Support and see if this will change (purchases are considered final), either via http://reportaproblem.apple.com or http://www.apple.com/support/itunes/contact/

• The application's command line arguments get the path to the file in windows Explorer

  Hello

  I am trying to open a file with my labview application .exe, so I thought that windows was sending the file path double clicked in Explorer solutions in the form of argument, but all I get is the name of my exe file.

  

  Does anyone know how to set up windows or the application to get the double click path from the Explorer, which has the file extension has already been associated with my exe?

  Thank you!

  I'm not sure I understand, but I think you want your Labview program to open another file, as a file of perimeter?

  Have three basic choices.

  Hardcode the path with file name in your program http://zone.ni.com/reference/en-XX/help/371361K-01/glang/path_constant/

  Use the file open vi and for the user to select the file to open http://zone.ni.com/reference/en-XX/help/371361J-01/glang/file_dialog/

  Write your program to accept a http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364 command line argument

• I get error: "the file or the C:\$Secure directory is corrupted and unreadable" after running chkdsk.

  I ran chkdsk utility and he stopped to say that I had a hard drive error or something like that. so I cancelled it. now I get all these things popping up that says ' the file or the C:\$Secure directory is corrupted and unreadable please run the chkdsk utility.» My question is if I run it again and it stops I have to do? I also need to know why I get the installer of windows popping up for office 2003, when I already have? I tried to reinstall with a drive, but my computer won't let me?

  original title: chkdsk utility
  original title: I ran chkdsk utility and he stopped to say that I had a hard drive error.

  I ran chkdsk utility and he stopped to say that I had a hard drive error or something like that. so I cancelled it. now I get all these things popping up that says ' the file or the C:\$Secure directory is corrupted and unreadable please run the chkdsk utility.» My question is if I run it again and it stops I have to do? I also need to know why I get the installer of windows popping up for office 2003, when I already have? I tried to reinstall with a drive, but my computer won't let me?

  What you need to do before anything else, it's everything and nothing important to you and to the stability of the machine (your ability to rebuild from scratch) backup because chances are - you will be rebuilding this computer from scratch and everything on this hard drive will be erased.

• When I try to run system repair ffrom originally Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt"

  Original title: when I try to run the system repair ffrom the original Vista 32 bit dvd, I get the error "the file i2omp.sys is corrupt" is anyone know the solution for this problem? Thank you, Kelsey.

  The message arrives as soon as I select "repair system" can not find the file on the Windows Dvd.

  Hello

  1. why you try to run the system on your computer repair?

  2. when exactly you receive this error message?

  If you receive the error message while booting from the Windows Vista DVD it means that the file i2omp.sys is corrupted.

  You may need to make arrangements for a Windows Vista disk that corresponds to the same edition, as it is installed on your computer. Later, try to repair the system on your computer.

  How to replace Microsoft software or hardware, order service packs and replace textbooks?

   
  Reference: What are the system recovery options in Windows Vista?

  Hope the helps of information.

• try to download and install cs5 online and get the message "'Install.app' is corrupted and cannot be opened. You must eject the disk image. »

  try to download and install cs5 online and get the message "'Install.app' is corrupted and cannot be opened. You must eject the disk image. »

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

• Get the long Word to continue in the cell without break area

  Hello

  I create a table that includes some codes that are a long string of characters. It would really help I could say the text to just continue in the round and fit into a cell in a table, without having to type a space (which would change the meaning and the appearance of the code) or increase the width of the column.

  It happens naturally in Word:

  

  does anyone know how to achieve this in Indesign, please?

  Hi Emma,

  You can try to format your text with the language: "[no language].

  Just like that:

  

  See you soon,.

  Uwe

• During the installation of Photoshop CC (2015), I get the following error "update failed, corrupted download, try to download again (U43M1D204).»  It will not download again, how to download?

  During the installation of Photoshop CC (2015), I get the following error "update failed, corrupted download, try to download again (U43M1D204).»  It will not download again, how to download?

  Error 201 & 205 & 206 & 207 or several U43 errors

  -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

• How to get the query of the region "PL/SQL function body returns the query string"?

  Hello
  
  is it possible to get the query string from the region of type "PL/SQL function body returns the query string"?
  
  I can get the definition of the region as a PL/SQL procedure, but I am interested in the returned query. I tried to write something like
  
  < pre > v_return_query: = «...» » ;
  : P49_QUERY: = v_return_query;
  Return v_return_query; < / pre >
  
  to save the return on hidden item P49_QUERY string, but it does not work. I get the error message: ERR-1002 cannot find the item for the "P49_QUERY" element ID in the application '4000 '.
  
  Kind regards
  Przemek

  If you need to make reference to a page element in the block then you can use this type of control to avoid having to use generic column names:

  if apex_application.get_current_flow_sgid(:APP_ID) = apex_application.get_sgid then-- runtime  :P9_SQL := vSQL;else-- design time  null;end if;
  

  But if all you want to do is capture the SQL debugging you can take all the references element in the block and use the insert statement (in a debug table) as I showed earlier.

  Scott