IKM Dimension application to slow variation problem

Similar Questions

• Perfomance of dimension to slow variation

  Hello
  
  I am facing big trouble with the implementation of an interface that uses the dimension to slow variation Ikm.
  
  The question is: 'Lines of flag for update' step takes more than 10 hours at the ends.
  
  I have a table source with 1 million records and a target table that has about 2 million documents. I had last hystorize documents of some columns (10 columns) and the other 20 columns will update if the data source changes. I've already put what each column of my target table (key replacement, replace the column, insert a line,...) and type Olap in my target table, that, in this case, it is a dimension to slow variation.
  
  I did all the types of changes but nothing works very well and the interface is still malfunctioning.
  
  I hope that any expert can help me because this problem is driving me crazy.
  
  Thanks in advance,
  
  
  Daniel huh

  I sent him. Take a look in your mail.

• An error of Dimension to slow variation: too many values

  Hello
  Trying to implement using the CPCS? IKM dimension to slow variation on all columns with their descriptions
  
  but, when I execute the lines 8 old Historize interface, that it was not
  
  Error message:
  
  913: 42000: java.sql.SQLException: ORA-00913: too many values
  
  java.sql.SQLException: ORA-00913: too many values
  
  at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
  
  I have only on 93 records
  
  can someone help me on this?
  
  Thank you
  Saichand.v
  
  Published by: André Varanasi on October 4, 2010 16:26

  SAI,

  The query I've deduced the following:
  1. natural key is DATASOURCE_ID
  2. you have 2 columns marked as end IFL stamp - T.AUX_DATE2, T.AUX_DATE4
  3. you have 3 columns marked as IFL Start Timestamp - S.INS_EXP_DT, S.AUX_DATE1, S.AUX_DATE3

  Apart from the error you are getting, there is another error you get - not enough columns.
  >
  Set)
  T.FLAG
  ,
  T.AUX_DATE2,
  T.AUX_DATE4
  ) = (
  Select 0
  ,
  S.INS_EXP_DT,
  S.AUX_DATE1,
  S.AUX_DATE3
  André. ' ' I$ _WC_CAR_Test "S
  >
  You try to define 3 columns, while the select statement has 4 columns.
  And this is due to the fact that you have more columns marked as start date of the SCD and SCD End Date.
  I met this interesting scenario, I think that the KMs are built to handle only a single column to be marked as SCD Start Date and another a column to be marked as SCD End Date.
  And it is consistent with the definition of the Type 2 SCD.

  Now, the error you get currently - as you have mentioned earlier that your Datasource_id is constant = 1. So, you have a natural key which is always 1 for all 93 records!
  Don't you think that it is good natural key?

• dimension to slow variation

  Hello
  
  I heard the dimensions slowly changin which is incorporated in version 11. is this true and how to do it in the console
  
  Mrithyu

  Hi Mrithyu,

  1. Yes, SCD (dimensions to slow variation) is now possible in essbase outline.

  2. sound of type 2.

  3. If you goto Regional service console. Open the outline-> click on 'Properties'-> 'various attributes enabled' do to true, if its fake.

  4. returning to theory and additional information of this feature, pls refer to SER60 (refer only version 11 SER60 pls).

  Hope this helps

  Sandeep Reddy, Enti
  HCC
  http://hyperionconsultancy.com/

• the application has encountered a problem and needs to close

  I build the LV, a request using the tabs, the FPGA dll and DLLs that communicate with devices CAN, GPIB, and PCI.

  The apears program to work properly, but sometimes and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close...". »

  Sometimes the error apears when I'm trying to exit the program, other times it hangs before that.

  I can't find the error because the program can work well for several hours and then crash or it hangs after 5 minutes of work with it.

  Clues about what goes wrong?

  Kind regards

  Daniel Coelho

  I'm still going through the example, but since the error ocours sporadicaly this could take some time to identify the error.

  I was browsing the code and I was wondering about simple things, like:

  -J' have many local variables, could it be the cause protected by some kind of error?

  -Since I use dll on my code, is there a way to make sure that all DLLs are loaded and unloaded properly?

  My program has a TAB with a simple UI of TestStand and when I change the tabs I close the user interface for teststand. When I use this UI I have load and unload DLLs of same that I use on other tabs, i. e., when you use the UI I load all DLLs that communicate with devices and when I change the tabs I unload all DLLs because on each separate TAB I can control these indicidually devices.

  It's a little hard to explain, but I think I managed

  Is there a grain of truth on my questions? If so, what could I do?

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Application has failed to start because msa32dl was not found, reinstalling the application may fix the problem

  How can I fix it?
  application has failed to start because msa32dl was not found, reinstaling the application may fix the problem

  First make sure that your system is clean in:

  Download, install, update and scan with these full free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  http://www.Microsoft.com/security/scanner/en-us/default.aspx Security Scanner   

  http://www.eset.com/us/online-scanner/ eset online scanner

  Then answer the following questions:

  brand and model of the pc

  current antivirus

  Operating system and service pack

  What application fails to start?

• This application has failed to start because uncdms.dll was not found. Reinstalling the application may fix this problem. How can I fix it? Kathy

  This application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix this problem.  How can I fix it?  Kathy

  The above explains the problem, my problem is I don't know what it's etymology comes.  Is this windows software, or software from Microsoft or both?  What is the name of the Application?  Help, please!  Thank you, Kathy

  Hi Kathy,

  1 have you made changes to your computer recently?

  2. When you get this error message?

  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  I suggest you to follow the steps and check if it helps.

  Method 1: Uninstall and reinstall Windows Desktop Search

  The uncdms.dll file is installed on your PC when you download the Windows Desktop Search application. Problems with this application's files can cause a missing uncdms.dll of error appears on your system.

  To uninstall the Windows Desktop Search from your computer, you must complete the following two tasks:

  Step 1: Remove Windows Desktop Search from the boot sequence

  To do this, follow the steps below:

  a. click on the start menu, click Run.

  (b) in the Open box, type msconfig and press ENTER.

  c. in the System Configuration Utility dialog box, click the Startup tab.

  d. search and clear the check box for any option that is related to Windows Desktop Search or uncdms.dll.

  e. restart your computer.

  Step 2: Uninstall Windows Desktop Search applications

  To uninstall the Windows Desktop Search using the Add / Remove Programs, perform the following steps:

  a. click the start menu and select Control Panel utility.

  b. double-click the icon Add / Remove programs.

  c. in the Add / Remove Programs, locate and select the Windows Desktop Search.

  d. press the button Delete.

  e. restart your computer.

  Method 2: I suggest do you an online scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• It's on my screen and I don't know how to fix it... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. » __

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  I have this message that appears constantly, and the only way to minimize it is to go to Task Manager. Here's what the message says... "this application has failed to start because AegisE5.dll was not found. Reinstalling the application may fix this problem. »

  How to re-install the AegisE5.dll?

  AegisE5.dll is linked to a network authentication system.  Because it is almost certainly only used with enterprise networks, you should communicate with your company, IT supports for assistance.

  If your computer does NOT connect to a corporate network:

  • What changes have been made recently to your network hardware/software?
  • You have a home network? Wired or wireless?
  • How is your computer connected to the Internet?

• I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

  I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

  Hello
  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  Methods of resolution:
   
  I suggest you to download windows desktop search for additional and install.

   
  http://support.Microsoft.com/kb/940157

• message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

  I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

  Hi vlademer,

  D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• every time I try to load it from the DVD the error appears as: "the application could not be started because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Original title: SPWIZENG.dll

  Hi, I got a cd of Windows 7 from my friend who is a software engineer so he gets all the programs (operating systems). It burned in a DVD instead of CD. So, every time I try to load from the DVD the error appears as:

  «The application failed to start because SPWIZENG.» DLL was not found. Reinstalling the application may fix this problem. »

  Then when I click ok, it says:

  The file 'Autorun.dll' could not be loaded or is corrupt. Setup cannot continue.

  Help, please. I'm not good with computers and I honestly don't know what to do.

  Thanks in advance,

  :)

  Hello

  Are you able to play or open other CD or DVD?

  Step 1: These error messages may be due to corrupted media. Try to use the same media on another computer and check if you are able to use it.

  Step 2: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-upgrade-windows-7-error-code-0x7e/b1bfbe8f-7980-4847-a186-2206e87c6bc4

• svhost error: this application has failed to start because xul.dll not found. Reinstalling the application may fix this problem

  I got a message when I reboot my pc
  «svhost error: this application has failed to start because xul.dll not found.» Reinstalling the application may fix this problem.
  I need someone to help solve this problem.

  Let's see...

  I downloaded this zip file to see what was in it.  The version of the file in this download link xul.dll is approximately 2 years and version 1.9.0.14

  The version of the xul.dll of Firefox on my system (trying to keep up-to-date and all) is aged two weeks and version 5.0.

  I think I want to reinstall Firefox, but this isn't the Firefox forum.

• Audio Board error, "IDT audio system tray application has encountered a problem and needs to close" at startup

  On startup, I get "IDT audio system tray application has encountered a problem and needs to close." How can I fix it?

  By replacing the file mixer...

  Right click on my computer > in the drop-down list on the left click on explore > in the menu bar, click Tools > File Options > see tab (or display) > 'Show Hidden files... ". "is ticked > stand c:\windows\system32\dllcache and right-click on the sndvol32.exe file and copy > paste here c:\windows\system32 and replace the existing file if requested > re - start.

  The error should disappear.

  If, for some reason, it does not disappear and you have no sound, download, then reinstall your audio drivers on the PC/Laptop manufacturers website.

  See you soon,.

  Jerry

• Cannot run Real Player. "This application has failed to start because MSVCP90.dll not found. Reinstall the application may fix the problem.

  I'm unable to launch Real Player. I get a message saying that, ""this application has failed to start because MSVCP90.dll not found. " Reinstall the application may fix the problem. I did play several times in past three days, but to no avail. "I even installed the" install Microsoft Visual C++ Redistributable Package in 2010. as suggested by Joel S-Support Engineer at one of the similar Querys. I I am facing the same problem even after installing, so! The same dll missing or damaged.

  I even started recovery deleted files dll in the registry by using strange solutions on the Web "Recuva" but it is of no use.  I do not know! I even started thinking of reformatting the hard drive or changing into a new One.  It's very frustrating. Lately no Fortunately, I hit to the top of your site looking for answers! I'm still fumbling for answers!

  Kindly help me! I anticipate a quick recovery solution please!  Thanks Roy

  Hi Roykarnataka,
   
  MSVCP90.dll errors might indicate a problem of registry, a virus or malware problem, or even a hardware failure.
   
  Scan the checker (SFC) system files on your computer and check if it helps fix the problem.
   

  SFC analyzes and verifies the versions of all protected system files after you restart your computer.

  Check out this link to do the same thing:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  More information is available at: (sfc) System File Checker