Illustrator 282C pantone color numbers different for example RBG, CMYK, Web color compared indesign colors and photoshops which has the same values of color for the two C. 282 I typed in a different color and the same issue. Why would it be different in a

Similar Questions

• Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is back different physical storage

  Hello

  I am new to vCenter Server, so you can assume that I'm missing something obvious.

  I installed vCenter Server 5.5 and one of the two hosts of re-usable ESXi 5.0.0 connected correctly. When I try to connect to the second 5.0.0 ESXi host, I get the error message:

  Data store 'datastore1' is in conflict with a store of data that exists in the data center which has the same URL (.), but is supported by different physical storage

  I Googled it and found what I think are the best answers that are successful, but they all seem pretty unique in their situation (they have a cluster, I do not have) etc. Some solutions involve disconnecting the store of data and reconstruction of things. I would not make things worse and can live without doubt with the help of vSphere client (and not the web client) until maybe I can start again with a 5.5 installation to a new host once I have back up everything from the host unconnectable. I closed all the VM on the host of the second. I have put in maintenance mode. I've renamed the data store, all to nothing does not.

  Thanks in advance

  The problem is that a whole army could not be connected to vCenter due to the problem, the solution involving disconnection of the host apply.

  Here is how I solved the problem:

  1 use the client vSphere client heavy, connect you to the host that cannot not be connected to vCenter Server.

  2. click on the host computer, and then click the Configuration tab.

  3. click on "storage".

  4. find the offending on the right data store.

  5. right click on the data store incriminated and click 'remove '.

  6. click on 'Add storage' in the top right.

  7. follow the steps to find this data not mounted store. I gave him a new name just to be sure, even if it's probably not necessary.

• Wlhich is the last Photoshop that has the oil paint filter?

  Who is the most recent Photoshop that has the filter of the oil it painting?  What is CS6?   or CC?

  Is there a substitute that is known for the oil paint filter?

  Thank you! Now, I try to install the CC.  I appreciate it!

• Merge two records which has the same ID

  Hi all
  
  Oracle version-> database Oracle 10 g Enterprise Edition Release 10.2.0.4.0 - 64 bit
  

   Table DB_TEMP
  
  create table DB_TEMP 
  ( Db_ID NUMBER, LAST_NAME VARCHAR2(30), 
  FIRST_NAME VARCHAR2(30), MIDDLE_NAME VARCHAR2(30), M_CODE VARCHAR2(10),
  PREFIX VARCHAR2(30), TITLE VARCHAR2(100),CREATION_DATE DATE); 
  
  
  INSERT INTO DB_TEMP values (3, 'JOHN', 'KER', '', 'A146', '', 'PRESIDENT', '5/1/2011');
  INSERT INTO DB_TEMP values (3, 'JOHN', 'KER', '', '', 'MR', 'PRESIDENT ACTIVE HERE', '5/10/2011');
  INSERT INTO DB_TEMP values (11, 'MATT', 'CARLONE', '', '', 'MR', 'CHAIRMAN', '5/1/2011');
  INSERT INTO DB_TEMP values (11, 'MATT', 'CARLONE', '', 'A149', '', 'CHAIRMAN INACTIVE', '5/10/2011');
  INSERT INTO DB_TEMP values (40, 'JOHN', 'SMITH', 'K', 'A147', '', 'PRESIDENT', '5/1/2011');
  INSERT INTO DB_TEMP values (40, 'JOHN', 'SMITH', 'K', 'A147', 'MR', '', '5/10/2011');
  
  Required Output
  
  DB_ID   LAST_NAME   FIRST_NAME   MIDDLE_NAME     M_CODE      PREFIX                  TITLE                CREATION_DATE
  ---------------------------------------------------------------------------------------------------------------------------------------------
  3       JOHN             KER                      A146         MR             PRESIDENT ACTIVE HERE           5/10/2011   
  11       MATT          CARLONE                     A149        MR             CHAIRMAN INACTIVE               5/10/2011   
  40       JOHN             SMITH           K         A147      MR             PRESIDENT                         5/10/2011   
   

  Has obtained two records with DB_ID even on different creation_dates, but some columns are filled in on the next day with the updated data. Now I need merge them into one by taking the MAXIMUM of the column
  
  Help, please
  
  Thank you
  
  Published by: 960736 on November 9, 2012 10:12
  
  Published by: 960736 on November 9, 2012 10:27
  
  Published by: 960736 on November 9, 2012 10:48

  Hello

  960736 wrote:
  I need complete records for title CONCATENATE them with ';' in the meantime, but title that has the M_CODE should must be first if not in does not matter in any order. Any remaining can be Max.

  DB_ID   LAST_NAME   FIRST_NAME   MIDDLE_NAME     M_CODE      PREFIX                  TITLE                CREATION_DATE
  ---------------------------------------------------------------------------------------------------------------------------------------------
  3       JOHN             KER                      A146         MR             PRESIDENT ACTIVE HERE;Member          5/10/2011
  11       MATT          CARLONE                     A149        MR             CHAIRMAN INACTIVE               5/10/2011
  

  So, for db_id = 3, wouldn't you ' PRESIDENT; PRESIDENT ACTIVE HERE; MEMBER "?"
  For db_id = 11, wouldn't you ' PRESIDENT; INACTIVE PRESIDENT '?

  Whatever it is, you need the string aggregation . See this page from the Oracle Base for several ways to do so. Since you have Oracle 10 and because the order is not important, I recommend so the aggregate function defined by the user, called STRING_AGG on that page, but the STRAGG called by most of the people who actually use it. Once you have created the STRAGG, you can use it like this:

  SELECT       db_id
  ,       MAX (last_name)     AS last_name
  ,       MAX (first_name)     AS first_name
  ,       MAX (middle_name)     AS middle_name
  ,       MAX (m_code)          AS m_code
  ,       MAX (prefix)          AS prefix
  ,       STRAGG (title)          -- or STRAGG (DISTINCT title)
                         AS title
  ,       MAX (creation_date)     AS creation_date
  FROM       db_temp
  GROUP BY  db_id
  ;
  

• Updated graphics on MacBook Pro which has the iris intel pro 1536 and the card nvidia geforce GT 750 M

  Hello world

  I was wondering if it would be possible to update the graphics card from nvidia, which is in my macbook pro 15-inch. Im not too tech savvy so I figure that I would like to ask the community. This laptop has the iris intel pro as well a nvidia geforce gt 750M.

  Thanks to all who replied,

  Ming

  N °

  Graphics cards and processors are welded on and are specially selected for the system.  Even the most tech savvy people would find it very difficult, if possible.

• enquery for wireless router which has the support of UPnP2.0

  I am looking to buy a wireless router that has the ability to UPnP and conforms to the standards of the IGD 2.0. PL you can help me help what model of Linksys router has this feature built-in.

  Model of router E4200 of Linksys compatible 2.0 of the IGD.

• Attempt to create run time (dynamic) table and insert the data in this... The entrance is a flat file (txt file) which has the numbers and strings... I'm trying to convert them to a string and insert into the table. It is a matter of urgency for me please

  create or replace procedure Dynamic_Table AS

  iVal VARCHAR2 (32);

  iTemp varchar (200): = ";

  sql_stmt VARCHAR2 (200);

  l_file1 UTL_FILE. TYPE_DE_FICHIER;

  l_file utl_file.file_type;

  BEGIN

  l_file1: = UTL_FILE. FOPEN ('TEST', 'dinput.txt', 'R');

  EXECUTE IMMEDIATE ' CREATE TABLE baseline (Item_ID varchar2 (32))';

  Loop

  BEGIN

  UTL_FILE. GET_LINE (l_file1, iVal);

  EXECUTE IMMEDIATE ' insert into baseline values (: ival) "using ival;

  EXCEPTION

  WHEN No_Data_Found THEN EXIT;

  While some OTHER THEN dbms_output.put_line (SQLERRM); * /

  END;

  end loop;

  END;

  You are approaching this the wrong way.  Create an external table based on the file.  External tables are CSV, fixed width data in a queryable table.

  You will need to create an oracle directory to put the file in (MY_ORA_DIR) I leave it for you to do, and then perform the following...

  create table BASELINE)

  ITEM_ID varchar2 (32)

  )

  EXTERNAL ORGANIZATION

  (

  TYPE ORACLE_LOADER

  THE DEFAULT DIRECTORY MY_ORA_DIR

  ACCESS SETTINGS

  (

  RECORDS DELIMITED BY NEWLINE

  LOGFILE "dinput.log".

  BADFILE "dinput.bad."

  NODISCARDFILE

  FIELDS

  (

  ITEM_ID

  )

  )

  LOCATION ("dinput.txt")

  )

  REJECT LIMIT UNLIMITED

  /

  All the dubious records appear in dinput.bad. Dinput.log will give you information.

  External tables are read-only, so once you set up your file, you can create editable as a normal table.

  create table ITABLE_EDITABLE as

  Select * from BASELINE

  /

  Work done, a few lines of code.

• How can awesome bar - I stop the auto switch to another window which has the same open site.

  Several times I want multiple copies of a site open, like to watch several mappings. But when I enter a new window mapquest.com , FireFox switches back me on the window that already has a copy of mapquest open. I can do things to get a 2nd copy open, but it's quite tedious. How can I disable this automatic switch for the other window? FireFox on Windows Vista Edition 12.0 Home Premium SP2

  • CTRL + left click or Middle-click the Reload button to open the current page in a new tab.
  • CTRL + left click or Middle-click points in the history of the buttons back and forward to open a page from this list in a new tab.
  • Duplicate a tab with its history by pressing CTRL and dragging the tab in a new position on the tab bar.
  • By dragging a tab in the window of the browser will detach from the tab and move in a new window, it is called tab tearing.
  • Drag a tab to the tab bar in the original or the anthers window to cancel a detachment or move a tab of a specific window. If a window is empty (you rock the last tab) then this window will be closed automatically.
  • You can use ALT + D to set the focus to the address bar and use ALT + Enter to open the current page in a new tab (no need to release the ALT key).

  Check and tell if its working.

• I have a CS4 (Windows) bought 4 years ago and I recorded my email with Adobe. However, I want to install it but I lost the box which has the serial number and I want to get it back. Is there anyway that I can get it back?

  Is it possible for me to use the email Adobe sent me 4 years ago as evidence and retrieve my serial number for installation? Help!

  Quickly find your serial number

  Mylenium

• You press on delete all selected items by browsing the data store and accidentally deleted a vmdk file which has the OS on it

  I accidentally deleted the vmdk file that has my OS on it by pressing the "Delete selected items" button in the window of browser data store. Is there anyway to recover? I have a snapshot that doesn't seem to work. There is still the VMDK file in there, but it has now 'delta' be added at the end. Now I get an error message when I try to turn on my VM saying that he doesn't get the vmdk file, of course.

  

  

  From the screen shots looks you have deleted only the descriptor hard files that can be recreated. To ensure this is the case, please provide a complete list of the files in the folder of the virtual machine and attach the last file.log of vmware(from the virtual work computer) to a post response to view required details.

  André

• Components ADF which has the same functionality as mailto tag in html

  I need an adf feature that performs the functionality of html "mailto" tag.

  Help out me.

  I used af:resource and f: verbatim

  does not

  User,

  Always mention your JDev version.

  Have you checked on af:goLink? You can set the property of the destination of it to mailto:abc@...

  Arun-

• I use a computer laptop lenovo, which has the trackpoint. with trackpoint scrolling does not work with firefox 4. This could have negative effects for users of the trackpoint. all solutions? Thank you.

  Lenovo t400 laptop

  Enter about: config in the address bar, Firefox request if you want to access the settings, click on the button indicating that you understand the risks.

  When the list of configurations come up, type "trackpoint" in the filter area, you will see a ui.trackpoint_hack.enabled"definition, which changes from-1 to 1

• do action of photoshop which saves the file with the specific file name

  Is there a way to make a photoshop action that makes a SaveForWeb, but adds text in the name of the original file when recording?

  By example, if I open a file called "guard page", and I want the action of making SaveForWeb in JPEG format, can I save as "coverPageWEBVERSION"?

  Thank you for your time and help

  No it's something, for that you will need for scripting.

  They really should introduced some changes to the dialog box Save that allows additions or of the changes can be triggered again in the actions of file naming. But they never have.

  As a solution, bridge is a good tool to rename, because there is naming can be SAVED and quickly applied to groups of files. Done - on a mac it is not often known are also the scripts OS can do the same thing. There is a script called "rename the items' hidden somewhere. It is accessible through the control or right-click on a group of files and going through the submenu "automate".

• iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone, which has the latest operating system running

  iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC.  The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.

  I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.

  Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.

• BlackBerry smartphones which has the best app flashlight?

  You are looking for an application of good flashlight that uses the camera light and allows me to place an icon on the screen to access or turn on the flashlight. Not interested in those who transformed one of the side buttons in a switch but prefer to have an icon on the screen to activate. Any suggestions?

  gr8fandini wrote:

  Looking for an application good flashlight that uses the camera light

  Why not just use the video camera?

  (a) it uses the light from the camera

  (b) there is an icon on the screen