Im getting error (49) downloading of photoshop that I do.

Similar Questions

• Windows Update lists an important update, but I get error when downloading it. "Fix" suggested did not work.

  Windows Update lists an important update, but I get error when downloading it.  I ran update readiness tool and two logs in Windows\logs appear no error at all and nothing fixed.  The update that will not download is KB974332, which can solve some problems I encounter.  What else can be done, or should I ignore this update?
  Just upgraded to Win7 64-bit, Vista 64 - bit Edition Ultimate Home premium.

  Hello

  Welcome to the Microsoft Vista answers Forum!

  We would like to ask you some questions to help us focus on the right place.

  (a) what is the error that you receive on the computer?

  (b) since when you are facing this problem?

  You can try the steps below and check if the problem is resolved.

  Note: this problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and look for the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Also, visit the following link for more reference on the particular update.

  http://support.Microsoft.com/kb/974332

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.

  Original title: Windows 7 system restore always fail.

  I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point.  I don't have Norton AntiVirus.

  If anyone can help solve me this problem I would be very grateful.

  Thank you for your response.  I forgot to mention in my first post, I tried both methods without success.  However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.

  Thanks again.

• Where can I get info and download Adobe Photoshop elements 14 app?

  Where can I get info and download Adobe Photoshop elements 14 app?

  nancyc5009177 wrote:

  Where can I get info and download Adobe Photoshop elements 14 app?

  A lot of information here:

  FREQUENTLY ASKED QUESTIONS | Adobe Photoshop Elements 14

• I get error 16 when opening Photoshop CC

  I use an imac, because I downloaded the photoshop cc I get this error message, error 16, I did everything I could, I followed the instructions on the web site, but nothing works

  http://helpx.Adobe.com/x-productkb/policy-pricing/configuration-error-CS5.html

• Develop an iOS on Windows application and get error 90161 downloading Mac

  Hello

  I have developed an AIR for iOS app in Flash CC 2014 on Windows. I use MacinCloud managed server to download .ipa to store for testing. This is the service of virtual server with Mac OS. They have the pre-installed Application Loader.

  I did [REB converted p12] certificates on Windows and installed temporary profile. I did another certificate on Mac and it has added to the temporary profile too.

  I get error when you try to download of the Application Loader:

  ITMS-90161 ERROR: "Invalid Provisioning profile. The configuration profile included in the bundle [Payload/yyy.app] com.xxx.yyy is not valid. [Missing code-signing certificate.] For more information, visit the portal developer iOS. »

  Stuck here. Tried to add cert done on Mac. Flash doesn't and stops compiling.

  Any help will be much appreciated.

  Apple test flight needs an IPA distribution, which has a key beta-reports-active in the descriptor of the app. A profile of development won't work.

  If you have access to a Mac and to a HTTPS server, look in get this app, it's much more simple announcement of builds:

  Mac App Store - BetaBuilder for iOS Apps

• Thunderbird is boring (suddenly) slow and sometimes get error message about a javascript that stopped working.

  The error msg appears who says that a script has stopped working. Also means Chrome and Macafee have something to do with the accident. I removed McaFee, empty the cache, unsinstalled and reinstalled Thunderbird - suggestions from another thread. But nothing has solved my problem.

  Uninstall is often followed by a re install. Especially if it has not fixed the problem.

  Have you tried Thunderbird safe mode?... press and hold down SHIFT while the program starts
  Have you compacted your folders? File menu (alt + T) > Compact folders...

• Get error fatal download Adobe Illustrator and Photoshop (part of the Creative Suite 5.5) to a new computer with Windows 10.  Are there known issues with these 10 widows supporting these two applications?

  All other applications in Creative Suite 5.5 loading properly.

  @

  do you mean that you see installation cs5.5 errors?

  If so, you can benefit from using compatibility mode to install and if you use a disk, copy the contents into a desktop directory.

• I get error message at startup lift that C:\WINDOWS\emelumihudusi.dll is not found. Impossible to find info on this program, he worked with.

  I searched for information on this error and can't find anything except 'pay' for programs that corrects errors of .dll.  I'm not having problems I can see with one of my installed programs.

  If you don't want to waste your time, I wouldn't do it.

  I'd do things like:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Can't get Shockwave to download using IE11 and get errors during download on Chrome... any suggestions?

  My daughter has a chemistry assignment that has a simulation using the Shockwave Player.  Repeatedly, I uninstalled and installed using IE11 and Chrome.  I am sent to the download page for Adobe for 64-bit whenever I'll use IE11... even though I followed the instructions from Adobe regarding ensuring that I use 32-bit.  Attached are the errors I get when downloading Chrome.  Any suggestions would be greatly appreciated.

  

  You have administrator privileges under the account you are using? Try to download and run the installer standalone (complete) from this link

• Errors during download of images in BLOB

  We have Oracle database 11g in our environment. I get errors when downloading image in BLOB. The steps are:

  1) I created the table like:

  CREATE TABLE test_image

  (

  Identification NUMBER, image_filename, VARCHAR2 (50), picture BLOB);

  2) create or replace

  PROCEDURE insert_image_file (p_id NUMBER, p_image_name IN VARCHAR2)

  IS

  src_file BFILE.

  dst_file BLOB;

  Directory of lgh_file;

  BEGIN

  src_file: = BFILENAME ("TEST_DIR", p_image_name);

  -Open the file

  DBMS_LOB. FileOpen (src_file, DBMS_LOB.file_readonly);

  -determine the length

  lgh_file: = DBMS_LOB.getlength (src_file);

  -Read the file

  DBMS_LOB. LoadFromFile (dst_file, src_file, lgh_file);

  -update the blob field

  UPDATE test_image SET image = WHERE ID = p_id AND image_filename dst_file is p_image_name;.

  -close file

  DBMS_LOB. FileClose (src_file);

  END insert_image_file;

  3) I did an insert-insert into test_image values(1,'2.tif',null);

  4) when I call the procedure-

  Insert_image_file(1,'2.tif') EXECUTE, I get errors like:

  Error from line 7 in the command:

  EXECUTE insert_image_file(1,'2.tif')

  Error report:

  ORA-06502: PL/SQL: digital error or value: specified incorrect LOB Locator: ORA-22275

  ORA-06512: at "SYS." DBMS_LOB", line 928

  ORA-06512: at "TEST_REPORT1. INSERT_IMAGE_FILE', line 14

  ORA-06512: at line 1

  06502 00000 - "PL/SQL: digital error or the value of %s.

  * Cause:

  * Action:

  
  

  I am not able to understand what goes wrong.

  Ask for a response to my post.

  Concerning

  [oracle@localhost ~]$ ## My Operating System Details.
  [oracle@localhost ~]$ ###############################
  [oracle@localhost ~]$ uname -a
  Linux localhost.localdomain 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
  [oracle@localhost ~]$ cd saubhik/
  [oracle@localhost saubhik]$ pwd
  /home/oracle/saubhik
  [oracle@localhost saubhik]$ ls -l *.jpeg
  -rw-r--r-- 1 oracle oinstall 1336 Mar 27 12:57 oracle1.jpeg
  -rw-r--r-- 1 oracle oinstall 2658 Mar 27 12:57 oracle2.jpeg
  [oracle@localhost saubhik]$ 
  

  Now, of the object directory configurations.

  [oracle@localhost saubhik]$ sqlplus / as sysdba
  
  SQL*Plus: Release 11.2.0.1.0 Production on Fri Mar 27 12:59:52 2015
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> -- Creating Directory Object.
  SQL> -----------------------------
  SQL> CREATE OR REPLACE DIRECTORY saubhik AS '/home/oracle/saubhik';
  
  Directory created.
  
  SQL> GRANT read, write, execute on DIRECTORY saubhik TO scott;
  
  Grant succeeded.
  
  SQL> 
  

  Now, your tables and procedure.

  [oracle@localhost saubhik]$ sqlplus scott/tiger
  
  SQL*Plus: Release 11.2.0.1.0 Production on Fri Mar 27 13:31:07 2015
  
  Copyright (c) 1982, 2009, Oracle.  All rights reserved.
  
  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> --My database version.
  SQL> ---------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> DROP TABLE test_image purge;
  
  Table dropped.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1* DROP TABLE test_image purge
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE test_image
    2    (
    3      ID             NUMBER,
    4      image_filename VARCHAR2(50),
    5      image BLOB
    6*   )
  SQL> /
  
  Table created.
  
  SQL> INSERT INTO test_image VALUES (1,'oracle1.jpeg',NULL );
  
  1 row created.
  
  SQL> INSERT INTO test_image VALUES  (2,'oracle2.jpeg',NULL  );
  
  1 row created.
  
  SQL> commit;
  
  Commit complete.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  create or replace
    2  PROCEDURE insert_image_file
    3    (
    4      p_id NUMBER,
    5      p_image_name IN VARCHAR2
    6    )
    7  IS
    8    src_file BFILE;
    9    dst_file BLOB;
   10    lgh_file number;
   11  BEGIN
   12    -- update the blob field
   13    update test_image
   14    set image=empty_blob()
   15    WHERE ID = p_id AND image_filename = p_image_name
   16    returning image into dst_file
   17    ;
   18    src_file := BFILENAME
   19    (
   20      'SAUBHIK', p_image_name
   21    )
   22    ;
   23    -- open the file
   24    DBMS_LOB.fileopen
   25    (
   26      src_file, DBMS_LOB.file_readonly
   27    )
   28    ;
   29    -- determine length
   30    lgh_file := DBMS_LOB.getlength
   31    (
   32      src_file
   33    )
   34    ;
   35    -- read the file
   36    DBMS_LOB.loadfromfile
   37    (
   38      dst_file, src_file, lgh_file
   39    )
   40    ;
   41    -- close file
   42    DBMS_LOB.fileclose (src_file);
   43    commit;
   44* END insert_image_file;
   45  /
  
  Procedure created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2    insert_image_file ( 1, 'oracle1.jpeg' );
    3    insert_image_file ( 2, 'oracle2.jpeg' );
    4* END
  SQL> /
  END
    *
  ERROR at line 4:
  ORA-06550: line 4, column 3:
  PLS-00103: Encountered the symbol "end-of-file" when expecting one of the
  following:
  ;  
  The symbol ";" was substituted for "end-of-file" to continue.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2    insert_image_file ( 1, 'oracle1.jpeg' );
    3    insert_image_file ( 2, 'oracle2.jpeg' );
    4* END;
    5  /
  
  PL/SQL procedure successfully completed.
  
  SQL> SELECT id,image_filename,dbms_lob.getlength(image) FROM test_image;
  
          ID IMAGE_FILENAME
  ---------- --------------------------------------------------
  DBMS_LOB.GETLENGTH(IMAGE)
  -------------------------
           1 oracle1.jpeg
                       1336
  
           2 oracle2.jpeg
                       2658
  
  SQL> 
  

  Check the file size with the size of the operating system. They are the same.

• I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

  I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

  Adobe Audition: For Macintosh

• I have the disc to download Adobe Photoshop CS2, but I do not have a CD-ROM on my laptop, is it possible that I can get it without a CD?

  I have the disc to download Adobe Photoshop CS2, but I do not have a CD-ROM on my laptop, is it possible that I can get it without a CD?

  CS2 (or earlier version) activation server has disappeared, then read below

  You MUST use the special number on the page, not your original serial number

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  NOTE that CS2 will not install on a Mac "modern", and when you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select Windows XP compatibility in the popup of option

  ... AND Vista problems https://forums.adobe.com/thread/416347

• I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  I'm trying to download 11 items that I already have on a new computor windows 8.1 after downloadind the first file and the extraction I get the error message when I try to download the second file: the party reach the components file is missing

  Make sure you have both. (1 of 2) file .7z and .exe file (2 of 2) under the same folder files

  Then double-click on the .exe file (2 of 2) it will start the installation process.

• I get a download error (49) downloading Photoshop CC 2014. any ideas? I'm under win 8.1

  I get a download error (49) downloading Photoshop CC 2014. any ideas? I am running Windows 8.1, any ideas?

  I installed and subscribe to Lightroom and creative cloud, both are going well.

  Paulr47158299 for more information on how to resolve errors download please see Cloud Creative applications download error - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.