image and video calibration in first cs4 (basic question)

Similar Questions

• More simple workflow possible cut pieces of video and video filling in first

  I'm looking for the workflow as simple as possible cut out pieces of a video and video filling in first. I am a novice, so I'm not so familiar with the software.

  Basically I have a subscription to the first (cc version) purcased since it is able to manage any video format. I may have a few images of the GoPro video taken from screenshot software, something taken with a video camera, etc. Although the video contains parts I want to throw. I need to quickly cut that out and trom it.

  I'm looking:

  How to mark a part of a video. That cut.

  Mark the beginning and end of a video. That cut.

  Export the video as a MP4 file or another file format which reads easily on a Windows machine with good quality.

  I want to use keyboard shortcuts as much as possible.

  Looking forward to your expert advice.

  There are two basic approaches, with multiple ways to accomplish each. I'll limit to a single workflow for each approach.

  APPROACH A: only inserting the segments you want from the Source monitor in the sequence

  1. Double-click A Clip to load it in the Source monitor
  2. In LUN Source, use the JKL keys to rub to the first image of a segment you want to use.
  3. Press I to develop
  4. JKL in the last image of the same segment
  5. Press O to set the point
  6. Press, [comma] to insert in/out segment in the timeline (see below for a note on the creation of a sequence)
  7. Repeat steps 2 through 6 for other segments of the same clip.
  8. Repeat the foregoing for Clips B to Z

  B APPROACH: By cutting out segments you don't want the sequence

  1. Add Clips A to Z of a sequence in the order you want to run
  2. In the timeline panel, use JKL to rub the last image of a segment you want to cut.
  3. Press O
  4. Press (quote) to "extract" (cut the defined segment and the gap) [not required to Point to the first segment because first will assume that frame 0 is the entry point...]
  5. JKL to the first frame of the next Segment to be cut
  6. Press I
  7. JKL in the last image to cut out
  8. Press O
  9. Press on '
  10. Repeat for the rest of the content of the sequence.

  These workflows is for on the simplest possible sequence: a series of clips on the same track (i.e. no compositing superposition or Picture-in-Picture) with all the sequential clips the clip a source, then another. If you want to have several layers or cut Clip a to B new Clip in Clip, then things become more complicated.

  As to the sequence, since you work with the contents of a series of cameras, you can have clips of different resolutions (SD, HD and even Ultra HD). In this case, you must decide what sequence parameters to use. You usually get the best results by setting the sequence to match content with its very small dimensions, then reduce other content at your leisure; Scaling up generally returns the quality degradation.

  While you might start thinking you're doing a very simple mounting, the complexity is almost sure to grow, in order to invest in the time to become familiar with the basic workflows will pay dividends. Here is a good starting point: How to create a video with Premiere Pro | Adobe first Pro CC tutorials

• How to recover data images and videos

  How to recover data images and videos of empty Recycle Bin.

  Hello

  Have you looked in the trash?

  Recover files from the Recycle Bin - Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

  Recover files from the Recycle Bin - Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/recover-files-from-the-Recycle-Bin

  How to restore previous Versions of a file and the folder of Vista (Ultimate, Business and Enterprise)
  http://www.Vistax64.com/tutorials/122127-previous-versions-shadow-copy.html

  How to restore files and folders in Windows 7 with previous Versions
  http://www.SevenForums.com/tutorials/85679-previous-versions-restore-files-folders.html

  ----------------------------------------------------------------------------------------------------------------------------

  This could help you recover a file, or a previous version (all versions of Vista and Windows 7).
  http://www.ShadowExplorer.com/

  ShadowExplorer - recover lost files and folders (Vista and Windows 7)
  http://www.SevenForums.com/tutorials/132087-ShadowExplorer-recover-lost-files-folders.html

  ----------------------------------------------------------------------------------------------------------------------------

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
  map of the camera digital or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Recuva - Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Load external images and video on board

  Hello.

  I'm looking into the edge instead of flash.

  My question is how to load you external images and videos from an external server?

  To clarify, I need to insert a link where the images can be recharged on the stage, while they don t meet the final weight.

  Thanks in advance.

  Best,

  Stig.

  I have provided the above solution works if you have the images in your publication and if you want to form load images from another server rather than the relative location of your html file.

  Now if you want to load images dynamically in a rectagle container you will have to code.

  Here is an example for this

  Create a "rectangle" name "Rectagle.

  Add the code snippet in the composition of the ready or other actions user based on your requirement

  "" var myImagetag = 'http://wwwimages.adobe.com/include/style/default/SiteHeader/logo-2x.png ">"

  SYM.$("rectangle"). Append (myImagetag);

• Images and video can Adobe Acrobat store?

  I'm trying to create a vbook, but wanted to know if adobe acrobat is the tool to use to create a vbook which also contains images and video without reference to external links.

  Not sure if my question makes sense.

  Yes, you can include multimedia (video, sound and SWF content) in a PDF file using Acrobat Pro, Indesign CS6, etc..

  Keep in mind that it is fully supported in Adobe Reader desktop versions.

• Adding several images and videos to DVD Maker

  When you create a DVD Maker project, I am able to add several images, and then I added successfully a video at the end of the photos. In order to catch up with my story, I would now like to add another group of images after the video. In other words, my goal is to have three scenes, IE 1 scene will be the first batch of images. Scene2 will be video and scene 3 to be the second batch of photos
  However, I find that whenever I try to add the second batch of photos they're all in the first group of photos automatically. I find myself with a larger size Scene1 and the Scene2 video.
  How can we separate the two groups of photos, when I open the DVD maker I see only a folder with pictures and the folder with the video. Can I change the order of these two, but I can't create the third folder of photos.
  All my photos are in .jpg format and the video is in .wmv format
  Thanks for any help and advice

  When you create a DVD Maker project, I am able to add several images, and then I added successfully a video at the end of the photos. In order to catch up with my story, I would now like to add another group of images after the video. In other words, my goal is to have three scenes, IE 1 scene will be the first batch of images. Scene2 will be video and scene 3 to be the second batch of photos
  However, I find that whenever I try to add the second batch of photos they're all in the first group of photos automatically. I find myself with a larger size Scene1 and the Scene2 video.
  How can we separate the two groups of photos, when I open the DVD maker I see only a folder with pictures and the folder with the video. Can I change the order of these two, but I can't create the third folder of photos.
  All my photos are in .jpg format and the video is in .wmv format
  Thanks for any help and advice

  =====================================
  If you need three specific scenes on your DVD... your best bet
  would be to create three projects Live Movie Maker and
  Save each in the. WMV Movie format. Then, when you
  import the three. WMV video clips DVD Maker intp... each
  one is a scene (chapter).

• Errors during synchronization iphone (5) and import of images and video in Vista

  When the synchronization and import photos and video from iphone using Windows Vista 32 bit Basic, the iphone is misidentified as belonging to my partner's iphone and I can't access 'Options '. How to reset the settings? or solve this problem?

  If you use iTunes to synchronize, you need to contact Apple support.

• HAVE CS4: Basic Questions

  Okey I have afew questions I'd like to know.

  #1, Im so creation and text with pentool, how to cut circles in the 'o' or 'P' etc...

  I tried used pathtool, seemed to work pritty, any other choise that I had to be looking for help?

  #2, Im trying to get the same color that is an object with but eye dropper tool does not seem to work with gradient.

  So my question is, how do I get the same color as I already got on the image and use it to summary?

  #3, is a good site where I can learn more about the basic tools and so, Im trying to learn manufacturing

  logos and other artificial intelligence instead of photoshop.

  Thanks in advance!

  Kind regards

  Rubber

  Perhaps this film will help.

  http://mysite.Verizon.NET/wzphoto/gradient.mov

• Cannot load images and videos on many websites.

  Original title: Help the small piece I don't know which plugin that makes this problem

  So I had this problem on many sites, where the images not loading well...

  Even on steam! Glance
  https://fbcdn-sphotos-f-a.akamaihd.NET/hphotos-AK-prn1/887317_10200828949699118_1672458955_o.jpg
  And it's the same type of error on many websites...
  I don't think that its my videocard (ASUS EAH6570) because I can play several video games without problem.
  Is this a pulg-in? Java? (I have the 32-bit version) Flash player? I don't know D:
  Thanks in advance!

  Hi Federico,.

  From the screenshot that you have downloaded, I see that you use Google Chrome browser to open Web sites.

  What is the brand and model of your computer?

  I suggest to open the same Web sites using Internet Explorer and check to see if you can open.

  You can also try to delete your cache and other data from Chrome browser and check if you can open Web sites.

  https://support.Google.com/chrome/answer/95582?hl=en&ref_topic=14666

  For more help with the images not displayed on Google Chrome, you can contact Google Chrome support.

  http://productforums.Google.com/Forum/#! Forum/chrome

  Hope that the information provided is useful.

• Adobe Stock Images and video.

  I get free Adobe Stock images as part of my package. This include video or can I negotiate many of them for a video?

  [Left the lounge general Forum for the specific forum - Mod]

  Videos are not included as part of a subscription of Stock and are available for individual purchase only.

  Common questions, Adobe Stock

  Thank you

  Bev

• How to proper resize images and videos when running without loss of quality?

  Hi guys. I need a little help here.

  I built a flash site, in which I want to resize a movie to the scene. I do it by keeping the proportion, so I just resize the width and then I resize the consequence of the height to the width of new but keeping the proportion.

  The problem is that my film looks like he "pixeled".

  I found a site on which the stage is resized dynamically with the movie and the background images without any of their loss of quality. So far, I knew that resize pictures or videos in flash for the creation or the runtime environment produces results pixeled.

  This is the site: http://kampanjeweb.apt.no/jotun/romforrom/. Can someone tell me how they do without quality loss? Just make the browser in windowed mode and resize the margins to see the effect.

  Thank you.

  Hello, Venian.

  On the video, you can try setting the smoothing of the flash.media.Video on TRUE property. This should keep a quality, but you can do nothing if the video has a bad quality. You need a great video.

  On the images, you you need to redraw the image whenever you resize. To achieve this, use a combination of Bitmap, BitmapData and Matrix classes. No doubt, just call again. Here's a simple example:

  var scale:Number = .5;
  var highQualitySourceImage:Bitmap = ...your image...;
  var scaleMatrix:Matrix = new Matrix();
       scaleMatrix.scale(scale, scale);
  
  var bitmapData:BitmapData = new BitmapData( scale*highQualitySourceImage.width, scale*highQualitySourceImage.height);
       bitmapData.draw(highQualitySourceImage, scaleMatrix);
  
  var finalBitmap:Bitmap = new Bitmap(bitmapData);
  
  addChild( finalBitmap );
  

  See you soon,.

  CaioToOn!

• Lost images and videos

  My computer shut down unexpectedly and I ended up doing a restore now all my photos and their records disappeared how do I get back them?
  My computer works fine now and the restoration was only a month back when I had almost all of these images.

  Just an idea that might be worth a try...

  Is it possible that your files are still there but have
  become hidden?

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  Let us know if the files reappear.

• How to delete the history of google, tried to delete the browsing history, that works, but it does not delete the site from google (in the middle of the page next to the images and videos

  How to delete the history in the Google search box in the middle of the page under Web new video Images

  http://www.Google.com/support/WebSearch/bin/answer.py?hl=en&answer=465

  See if help above.

  See you soon.

  Mick Murphy - Microsoft partner

• Help integration of still images and video, please

  Greetings. In Movie Maker, insert a still or video while maintaining the continuity of the original audio track "money"? Thank you very much.

  Greetings. In Movie Maker, insert a still or video while maintaining the continuity of the original audio track "money"? Thank you very much.

  =========================================
  The task that you describe is easy to do in the previous Vista Movie Maker
  version 6 because it has a scenario with multiple tracks... Video,
  Transition, Audio, music and title overlay.

  If you download and install Vista Movie Maker 6, tutorial
  pasted below (composed originally for XP Movie Maker) should
  help you get started

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Vista Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  ======================================
  Always insert shots in a video Clip and maintain Audio continuity
  ======================================
  For the timeline, drag a second copy of the video to Audio / Music
  follow and drag it left or right to align on the Audio track. Now, that
  instance of the video file will be recognized as an Audio file.

  Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... .and remove
  a section... then insert a Photo and give it the same length as the
  segment you removed.

  Here's another method:

  Split your video clip on each side of the area where will be the stills.

  Now... drag the part cut on the audio / music. BTW... If you want to
  to add a second 5 again... Remove 5 seconds of the video clip. (info below
  splitting if you need it)

  Drag your fixed shots to the timeline and drop it off at the place where
  you have deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to
  adjust its position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line), advancing through the
  timeline.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

• What happens if I don't have the ability to import images and videos under file

  How can I scan my photos to my pc and save it?

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-your-old-photos-to-digital-pictures-using-a-scanner-to-archive-your-memories-digitally

  or

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-digital-pictures