image appears due to the space in the file name

Similar Questions

• The black areas of the image appear curiously in the file opened for a long time

  There's probably a simple explanation, but if I have a file open in Photoshop for a long time blacks will start appearing saturated/blocked upward. If I close and reopen the file, it looks normal again.

  Anyone know what causes this and how to prevent it?

  I use OS X Lion, Photoshop 5, Apple Cinema display 30 ''. My monitor is calibrated by X-Rite i1 display and resets according to amibent light.

  Thank you.

  Try to disable the ambient light of the i1 function and see if that helps.

• When I do a search of progress sometimes the title appears instead of the file name.

  How can I change the file to show just the name of the file in the search results. Example: I created a PDF with WinPDFfrom a bill of Quckbooks, however, when I do an advanced search results show the name of the file as Inuit rather than the actual file name. I find that the word Inuit is in the dialog box properties labeled author title but Adobe won't let me change the Inuit word in the title box. Help?

  In the Adobe Reader preferences to disable the entry "Show title of the document in the search results" in the "Research" category

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names.

  * Original title: file names of photos of Deletig Windows after emptying the file

  I have deleted the content of several image files and now want to remove the file names. I don't find a way to remove the names. How can I delete the file names?

  Right-click on the name of the image file, then choose 'delete '.

• BlackBerry Z10 how to display the file names of the images?

  I bought an App to recognize the flowers. My blackberry shows photos, but not the names of the plants. That's why I need to see the file names of the images. How do I handle this, STI is possible?

  Use the file manager with your device application.

• Error - the file name, directory name or volume label syntax is incorrect. "(0x8007007B), when you exit the system restore.

  Original title: System Restore problems

  Hello, I am running Windows 7 Home Premium 64-bit classic mode.  My system specs are listed under my signature.

  Before installing a program today, I went to create a system restore point.  In system properties > System Protection, I see that in the Protection settings > disks available there are two instances of the C: drive tagged like this:

  HDD0 (C :) (System) Protection on (selected)
  HDD0 (C :) (Missing) Protection on

  This is probably due to having recently replaced my C: drive with a disk larger to help to restore from a System Image backup.  The installation seems to succeed.  (I use now!)

  Note: other readers in Protection settings are showing off Protection.

  When I clicked on "Set up" in system properties > System Protection, I have seen that in the restoration of settings, the box "Turn off active Protection" has been selected.  I put the option button "restore system settings and previous versions of files.  In space, the slider was set to 0.  I put it to 1% (857,54 MB).

  When I tried to leave the system of Protection for the dialog to HDD0 (c) I got this error:

  There was an unexpected error in the property page:
  The file name, directory name or volume label syntax is incorrect.  (0x8007007B)
  Close the property page and try again.

  I deleted all restore points, then created a new restore point.  Current usage shows now 29,48 MB.  I still get the error when I try to the OK from the dialog box.  When I click on the system restore and start the Restore Wizard that I can see the restore point, I just created.

  Any help to banish the fake player available and messages will be appreciated greatly.

  -Dave

  ASUS P7P55 Deluxe
  PC power & cooling silent 750
  Corsair CMX8GX3M4A1600C9 (x 2 4 GB DIMMS)
  ZT-98GES3M-FSL ZOTAC GeForce 9800 GT 512 MB GDDR3 256-bit PCI Express 2.0 x 16
  Drive0 (OS) SSD OCZ Agility 2 OCZSSD2-2AGTE90G 2.5 "90 GB SATA II
  Reader1 (data) HITACHI UltraStar A7K2000 2 TB 7200 RPM 0F10452 / MIN 32 MB of Cache SATA 3.0 GB/s
  Lecteur2 (Apps, pagefile, Misc) SSD OCZ Vertex 2 OCZSSD2-2VTX50G 50 GB
  Drive3 (Web data, configuration files Pgm) OCZ SSD Vertex 2 OCZSSD2-2VTX50G 50 GB

  Hey DaveMcKeen,
   
  The error 0x8007007B occurs when the system is configured to store restore points to a location or a bad way.
  
  Set the path to the appropriate Windows 7 restore point.
   
  To remove this error message, follow the following solution:
   
  Step 1:
   
  To set the path of the appropriate Windows 7, restore point as follows:
   
  a. Click Start.
  The Start Menu appears.
  b. type sysdm.cpl in the start search box and press .
  The user account control window will prompt you for permission to run the program.
  c. click on continue.
  The System Properties window appears.
  d. click on the System Protection tab.
  e. under automatic restore points, uncheck all invalid location or duplicate
  f. Click to check drive C: with the Windows Logo
  g. click on apply, and then click Ok
   
  Step 2:
   
  Create a system manually restore point:
   
  a. open system by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click System.
  b. in the left pane, click System Protection, if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  c. click on the System Protection tab and then click on create.
  
  d. in the System Protection dialog box, type a description, and then click on create.
   
  Reference:
   
  create a System Restore Point:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-restore-point
   
  System Restore: frequently asked questions:
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions 

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Titles or subtitles of the file name?

  Is it possible to automatically generate the titles or subtitles of the file name? I have a video made up of several small files and you need to insert their names under the name of a chapter, or at least as a subtitle. FCPX only supports to support the generation of TC.

  The short answer (obtuse) is not. Not in FCPX alone.

  I seriously doubt you will be interested in this procedure, but someone might be.

  You need movement (this is the only expense here), TextWrangler and a droplet of Automator (see below).

  First, gather all your files of clips in a folder.

  Drop the file on the files in the folder (the automator app/drop) that will create a text file with the names of all files in the folder. When you are prompted to save the file, you can name it and save it wherever you want.

  Gout Gets the names of files from the Finder, and they are complete paths, such as:

  / Users/fx/Desktop/txtLicenses/Aardvark Cafe readme.txt

  [You can download a copy of the 'Files in the folder' drop HERE ]

  Open a window in TextWrangler, and then drag the text file to a blank page (very cool - TextWrangler automatically opens the file with drag and drop.) [TextWrangler is FREE of Barebones.com (http://www.barebones.com/products/textwrangler/) software, everyone should have a copy! The most recent version is 5.0.2 in date 25/12/2015]

  Type the command + F to open the Find/Replace dialog box. Make sure that Grep is checked.

  To find them, use this regex:

  .*\/(.+)\.. +

  [translated: find everything up to and including the last ' / ' character, can find everything up to the last period and save it as a game (the parenthesis) and then find everything at the end of the line]

  As an alternative, use:

  \1\n

  [Translated: prints the substring and adds a newline character - it will be double space lines of text]

  In the drop-down menu with the label of 'g', save... (model - something like Remove Path and FileType) so you can find it again easily.

  The text from the above example will become:

  Aardvark Cafe readme

  [and will follow an empty line]

  [I recommend you do all your spelling at this point.] Make sure that all text is as you want it to appear in FCPX. Repair later gets a bit dicey. and generally it is a good idea to start over if you need to make changes to the text file.]

  Save the file with another file in TXT format.

  On the move:

  Create a project generator. It can be almost any length, so accept the default value of 10 seconds. You will be stretching out in FCPX in any case.

  Add: Generators > text > file

  [You can use the Inspector to Format to choose the font, size, etc. and the inspector looks for color and 3D options].

  In the Inspector of the generator, find the section, load your text file

  Set the speed to Custom

  Reset the Custom speed setting

  Publish the speed of Custom setting slider

  Save in FCPX (and create a category called subtitles)

  When you save the generator in FCPX, the file being used is hard-copied in the media for access folder. You cannot publish the setting browse generator, so all files subtitles prepared in this way are projects of "One Shot". You can throw away them once your project is completed because their utility essentially died with the FCPX project.

  In FCPX, apply the generator to the plot and develop it to adapt to the length.

  Keyframe of the lines of text to match the timing of your video. This is where double spacing will be useful because it is a real pain in simple lines of keyframe and you will need a bit of space for a step-by-step. You can, of course, import the audio portion of your story in motion, create a project for quite a long time for the entire length and key image subtitles in movement. You can export as, eventually, the subtitle project as ProRes (if you do not use 4444, then you can apply the Composite blend mode add to the layer that you use in FCPX as the background should be black.)

  If all of your clips are the same length of time, then using the subtitle generator is a snap. Set a keyframe at 0 for the appearance of the first line and in the end, the last line should appear, simply drag the speed until the last line shows control (should be at or close to 100%). The generator systematically displays a single line both throughout the progression of his 'read'

  I found that the faster is to import the audio in motion and create a Motion project, the length of the audio used for subtitles + a little extra at the end.  Listen to the audio, and for each line that you display, add a keyframe... little whatever it is. When there is a keyframe for each line, listen again and adjust keyframe values to display the line. This will leave you with linear transitions from one image to another key (and overlapping in some cases, or the appearance of lines before image real key because of "Rounding errors") - is NOT a problem! Just select 1 keyframe, type command + A to select all the keyframes, and then right-click on a keyframe and select constant on the menu drop down. This will create a step-by-step through each value and you give the * discreet * timing you have need for the text to appear at the right time.  Remove the audio track and save the project as a generator of FCPX... it is faster and easier to export a track video overlay.

  You need movement 5.1.x or better (there are serious problems with 5.0 versions and file generator.)

  I know it doesn't look like it, but this method of captioning is much easier than ANY other software of captioning I've tried in the past... NO timecode or the special formatting is required... other recommended spacing to double.

  HTH

• The file names changed on computer are different once the download to the player

  Recently, I've cleaned more than 600 + songs on my player to make more room for new music. I downloaded several songs from different sources (as usual) (I use my rocket for music and nothing else) and changed their names into something I woud download original recognize. When placed on the device, the file names will appear in cryllic, half recognized Japanese or a series of numbers.

  AND the songs newly added to the "rocket" do not appear in the upper part of music recently added as it should (until I deleted the player off)

  My computer does not recognize the Fuze 4 GB, I was recently using a miniSD 2 gb, but the recent downsizing rendered useless until I have run out of space.

  ... I think that's all... What should I do? Its very annoying and I would LIKE your comments!  Help, please!

  Just guessing, but have you changed the names of the new music FILES?

  I think you will find that the displayed info song comes from tags in MP3 files.

  You can change these if you want to... There are publishers of available MP3 tags, I've been using

  a program called "MP3tag", oddly enough.

  You can also add album art using this same program.

  Have fun

  LyleHaze

• Cannot right click Windows 7 Explorer of files to generate the copy of the file names in a Notepad or Excel-compatible file. HELP REQUESTED!

  I struggled for several hours to restore the service right click that I used to have XP to Windows 7.  I need to save lists of file names such as displayed in the file Explorer. Allowing you to right-click and save files in Notepad. This option has been removed in Windows 7 and anything put in place to restore it.

  I have lists of items in the inventory and need to copy and paste the image corresponding to a transfer sheet to allow the server names to match images in article SKU.  The file names are long and typing is a complete waste of time.

  I used to be able to find them in the Windows Explorer, right-click on the directory and generate a txt file that I could open in Notepad or Excel.  -Easy.  Now right-click only allows an export in an uneditable image in ONE NOTE. This is useless for me. I can't do anything with an image file - I need the editable data.

  Is there a solution?  I need only the file name and extension, not the full path, in a text or spreadsheet document propagation.

  I had used the Microsoft solution to install their dose without knowing the final format was a NOTE image file format and not a simple txt file. I try now too write the batch file:

  %windir%\Printdir.bat

  or edit it in order to keep the file in Notepad and do not make the final conversion into a single Note.

  The problem is that the fix from Microsoft, designed to fix this problem, has placed the conversion file in the root directory and it cannot be overwritten.  I refused the possibility to delete, edit or write the file due to the requirements of administrative privilege mandated by the security of Windows 7 too much.

  So if anyone has a solution to every problem - that would help - I am very tired and frustrated and not happy with Microsoft.  Their zealous concern with security made their unnecessary programs for me and have further discouraged me to convert to the windows 10. frustrations and nightmares are waiting for me there I can't imagine.  What I really want to do at this point is to go back to XP.

  He ate five hours of my day. I don't have the time to fight like that. I am trying to be productive, but all I got are monumental technical walls and roadblocks - often designed into the system. Frustrating doesn't begin to describe it.

  Found a solution on a Web site:

  http://www.watchingthenet.com/how-to-print-a-directory-tree-from-Windows-Explorer.html

  They said it was for VISTA, but worked for me under Windows 7. You will need to use Notepad to the command prompt and select run as administrator to save the file in the root directory.

  Thanks for the help.

  Cheers.

• Why the file name of the file as an attachment with Annotations "attach a file" (trombone) become unknown when the observations are published?

  Our company recently purchased Adobe Acrobat Pro XI intended to be used for shared electronic reviews.  We use the send for shared review in Adobe Acrobat Pro XI, and all the comment tools work as expectedexcept the trombone in Annotations.

  When a Word or Excel or Image (png, jpeg) file is attached using the trombone of Annotations, the initiator may initially see and open. But once feedback is enabled and the review file is closed, the file 'Name' becomes 'Unknown' (even if the Description is the correct file name and extension).  Change information are unknown, such as size and compressed size.

  When the control file is then reopened, even the initiator cannot open the file, although:

  • The location of the file is marked with the paper clip in the document.
  • The file name is displayed in the list of comments with the name of the initiator.
  • In the list of attachments (the paper clip under the thumbnails and bookmarks), the name appears as unknown, shows the file name Description, update is unknown, the size is unknown and compressed size is unknown.

  
  

  The file name cannot be published, although the Description file can be.

  We have followed the procedure described in the tutorials but may not know how to resolve this situation.  As this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please leave out the basics because we are new users.

  We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI is a Windows platform.  Can someone please give us some advice how to get this function runs as described?

  The bug is fixed in the latest Adobe Acrobat Pro XI 11.0.09 update (update: in Acrobat Pro, go to help-> Check for Updates...).

  -Rohit Sharma

• I can't stop slide show of Photos showing the file name at the beginning?

  I made a slideshow for a crowdfunding charity event, but the Organizer is hampered by the fact that the file name displayed in large characters, hiding part of the actual text, when the slideshow begins to play. I can't find anything in the controls or insufficient preferences to stop what is happening, someone at - it ideas? I admit it is a bit ridiculous.

  Thank you!

  Kit.

  Using Photos or iPhoto to run your slide show?  Only the project title appears automatically on the first slide and does not display the names of files.  The user needs to add additional text/filename to each slide with Photosl

  If you use iPhoto then click the gear pinion and check the Show Legend checkbox is unchecked in the slideshow settings window:

  

  

• How can I have the file name as visible caption on the photo

  I have several hundred digital images that I have edited and saved with a meaningful file name.  I would like to produce a slide show and then burn to DVD with the name of the file as a legend, preferably (but not necessarily) without the file name extension (for example, my photo.jpg would show as 'my picture').

  I (Pinnacle Studio) software that will import photos or DVD, and I'll create my slide show with Studio, since I am familiar with this software, but the Studio does not automatically create captions.  Re-type the captions for each slide will be intensive work and maybe isn't necessary.  I have a couple of programs that will produce a legend using the file name, but they are old and do not have an option to burn a DVD - only to run the slide show from the software owner.  I also Ulead FT 6 and Adobe PS Elements 6.  I am running Vista and have another computer with XP, so I have the photo editing software that comes with those.  I haven't found something that will prepare a folder of photos by file name as legend I can burn on a DVD.

  searching on the Internet I found a few programs for sale that seem to have the ability to do what I want, but I have hundreds of programs, and I don't want to buy another for only this seemingly simple task.  There are shareware/freeware/trialware which will allow me to display the file name as captions for photos and then burn a DVD or create a file that I can burn it with Nero for import into Studio 12 or 14 Studio?

  I have several hundred digital images that I have edited and saved with a meaningful file name.  I would like to produce a slide show and then burn to DVD with the name of the file as a legend, preferably without the file name extension (for example, my photo.jpg would show as 'my picture').

  I (Pinnacle Studio) software that will import photos or DVD, and I'll create my slide show with Studio, since I am familiar with this software, but the Studio does not automatically create captions.  Re-type the captions for each slide will be intensive work and maybe isn't necessary.  I have a couple of programs that will produce a legend using the file name, but they are old and do not have an option to burn a DVD - only to run the slide show from the software owner.  I also Ulead FT 6 and Adobe PS Elements 6.  I am running Vista and have another computer with XP, so I have the photo editing software that comes with those.  I haven't found something that allows to print a file of pictures with the file name as legend I can burn on a DVD.

  searching on the Internet I found a few programs for sale that seem to have the ability to do what I want, but I have hundreds of programs, and I don't want to buy another for only this seemingly simple task.  There are shareware/freeware/trialware which will allow me to display the file name as captions for photos and then burn a DVD or create a file that I can burn it with Nero for import into Studio 12 or 14 Studio?

  ==================================
  FastStone Image Viewer freeware can
  be useful to experiment.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm

  Add file names:

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  How to:

  "Basic steps to add text to the image files.
  using Fast Stone Image Viewer"

  Tools / Batch convert / Batch Convert tab...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  Open the window drop... "Insert a Variable."
  choose... The file name / no Extension... Ok...

  Add the files you want to add...

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• The file names changed in wingdings, including the file extension and I can't delete, change them, open, etc. Here are the pictures.

  Have (had) a file with multiple files it contains with pictures in each file.  A week ago the pictures were there.  Now, the names are replaced by wingdings as names and file extensions.  When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect.  When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name.  When I try to rename it, it tells me that if I change the file name extension, the file may become unusable.  If I try to change anyway, it says I've specified file name is not valid or too long.  Only tried for the name 1.  I did a restore in the case where a program interfered with that.  However, nothing has changed.  All of the suggestions.

  You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh.  Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options).  NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly.  My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.

  I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above).  Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions.  It can be used to recover previous versions of files that have been changed or deleted accidentally.  Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.

  If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/.  I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file.  It will not help you in this instance, but it can help save the next time.

  I'm more concerned about why this has happened in the first place and prevent it from happening again.  I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename.  We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  If you find any these corrupted files, try to post them here.  Maybe we can replace the good files on the disc.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Want the file names to work as captions

  Hello, I am about to create a DVD of photos and music from an audio CD.  I've never used Windows Media Center before, but plan to use for this project.  Before we go too far, I would like to know how to have my file names to display on each photo - as a legend.  And I don't want the file extension that you want to display.  Can someone tell me how to save the pictures correctly for this purpose?  Thank you, Susan

  FastStone Image Viewer freeware can add
  file names in the face of your photos in a batch.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  FastStone Image Viewer
  http://www.FastStone.org/FSViewerDetail.htm
  (Windows XP / Vista / 7) (on the screen to download...
  try... exe (site 2) for easier downloading)

  I suggest that you create a new folder and add
  copies of your photos for experimental purposes.
  If you are unhappy with the result your originals
  will be intact.

  After FastStone is downloaded and installed...
  Open the program and go...

  Tools / open the Batch Conversion / tab Batch convert...

  Check the box... Use of advanced options...

  Advanced Options button / tab text.
  Check the box... Add text...

  (You will need to experiment with the position and the police
  size and color to get the desired result.)
  (the text size will need to be adjusted according to the)
  the size of the photos)

  Open the window drop... "Insert a Variable."
  choose... The file name / no Extension...
  (in the white field you should see ($C1)
  Left click... Ok

  On the Batch tab convert... in the left field...
  Find and select the photos you want to
  Add.

  Left, click on the Add button to move the files to
  the right field.

  Choose an output Format...

  Choose an output folder...

  Click on the button convert...

  It's much easier to do than to explain then
  give it a try before say you "Good Grief... it's too
  a lot of work.

  BTW... when your photos are ready... try to import
  in creation of Windows DVD to create your video
  slide show.

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc