image correlation digital vi

Similar Questions

• Cannot transfer images from digital Canon to Windows Vista. received message "save file not found" "Cameras Windows DC. default download folder is "my images".

  I have been transferring pictures from my Canon Digital via the Canon software in a Windows "My pictures" file for about 2 years with great success.  Today, an attempt to transfer was interrupted with the message 'Save folder not found' "Cameras Windows DC.  I noticed that was missing the file "my images".  I added one, I reinstalled the Canon software, I tried to download the image using the "Windows Photo Gallery", but got the same message as above.  What can I do to be able to download the photos again?

  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two (he may have started before that you have noticed).  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  If this does not work, please transfer your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the people who specialize in issues related to the image will be more than happy to help you with your problem.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How do I detect when a write of correlated digital output is completed

  Hi LabGurus

  I'm trying to synthesize a SPI signal on the output lines digital stamped usin a M - Series USB Daq (6225, 6229).

  I wrote most of the code and have developed the following problems:

  When I use 'finished samples' to the clock mode, the waveform it is limited to the size of the buffer on board. There is no specific error, but the output waveform is strangely truncated States 1027. The nidaq buffer is fixed and changing the buffer on Board has no effect.

  When I use continuous samples, there is no way to detect when the task is finished 'Really' (I can clarify in the last round of data is transferred to the device, but not when he was timed out of the unit).

  "Task Daqmx is over" and "Daqmx Wait for completion" give no idea.

  I detect when the last USB device transfer is completed using a write property node Dqmx and comparing 'written total samples' at the 'current write Position.

  The function works as much as I leave long enough so that the task is completed. In almost a fixed delay is not acceptable.

  Timmar,

  For the finite method, have you tried to change the value of "samples per channel" on the VI of Timing DAQmx?  It's what you define for your task to know how many points to wait at the exit.  The default value is 1000.  I hope this helps.

  Kind regards

  Brian T

  Technical sales engineer

• I can't display RAW images in digital photo professional.

  All I can see after their loading is the number and a cross on the image. It's software mark11 7 d

  jrhoffman75 wrote:

  What operating system?

  If you click on file in the folder on the computer what happens?

  And it's a 32 bit or 64 bit OS?

  And you still haven't told us if you use DPP 3 or 4 DPP. If you don't know the answer or don't understand the question, you have reading to do.

  How old is the card reader, and what cameras did you use with before you got the 2 7? The 2 7 produces large RAW files. It is conceivable that the card reader is unable to manage them and loses a part of the image. The figure of the "cross" (I assume you mean a grey field with two intersecting lines to reach the corners of the frame) means that DPP considers that the image file to be blurred or incomplete. One way to test this is to use the EOS utility (again, there are two versions) to download the image directly, without going through the card reader. In some operating systems, this process can be difficult to implement, but it might let you exclude the reader as the source of the problem.

• IMPORT OF IMAGES FROM DIGITAL CAMERA

  I'm running on Vista and since the update of my safety on Norton 360, I can't load pictures from digital camera.  I had no problem before this installation with more than 4,000 pictures on my computer

  I'm running on Vista and since the update of my safety on Norton 360, I can't load pictures from digital camera.  I had no problem before this installation with more than 4,000 pictures on my computer

  =====================================================
  I have not personally experienced this Issus so cannot check the following solution.

  There is discussion on the site of Norton uninstall/reinstall your USB drivers
  may fix this problem.

  The following article offers instructions:

  Reinstall USB drivers
  http://Acer-UK.custhelp.com/app/answers/detail/A_ID/471/~/reinstalling-USB-drivers

  If you want to find the Norton Community FYI here is the link:

  Norton community
  http://community.Norton.com/

  If you decide to try it... Let us know the result.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Super 8mm film Images to digital video.

  I carefully scanned never framework of 50 feet of film Super 8 mm. What Adobe application is best suited to assemble these images to a video?

  Ask http://forums.adobe.com/community/premiere/content or http://forums.adobe.com/community/premiere_elements/content

• digital reading correlated and static

  Hello

  I use a CDAQ-9172 chassis with a 9423 module and a module 9425.

  Can I make measurements correlated with the static AND 9423 of reading with 9425 module at the same time?

  I think to create 2 separate tasks for it.  A task for corellated measures and one for static electricity.  Would this work?

  Thank you

  Dan

  Altogether.  The cDAQ-9172 you can have 1 correlation digital special entry, 1 digital output correlated with task and any number of static digital tasks, at the same time.

  On the cDAQ-9172 modules in correlated digital task must be in slots 1-4.  There is no restriction of slot on the static digital tasks.

  Just like the heads-up, 9425 module can currently * only * do entry static, but that looks like what you want.

• Microsoft Digital Imaging Anniversary Edition-could not remove photos from the digital image library

  Microsoft Digital Imaging Anniversary Edition

  I have problems with digital imaging.  Never been wrong before, so I'm puzzled!  Recently added pix from CD to digital photo Image file picked up but did not display the photos on the page of digital image library - they come just under the icon standard w/o a view of the pix.  I tried to delete these files where the pix would not come to the top of the digital image.  Digital image would not remove them.  I deleted the pix of the computer files.  Digital image still would not remove the files in the library. I went into the Control Panel, I removed & reinstalled the Digital Image, but all files keep coming back.  Digital Imaging tells me I have 4000 photos stored there!  If I do, where are they?  I can't find them!   Is there something else I can do?

  I use Windows XP.  I've seen Info for Vista, but I need it for XP.

  I have problems with digital imaging.  Never been wrong before, so I'm puzzled!  Recently added pix from CD to digital photo Image file picked up but did not display the photos on the page of digital image library - they come just under the icon standard w/o a view of the pix.  I tried to delete these files where the pix would not come to the top of the digital image.  Digital image would not remove them.  I deleted the pix of the computer files.  Digital image still would not remove the files in the library. I went into the Control Panel, I removed & reinstalled the Digital Image, but all files keep coming back.  Digital Imaging tells me I have 4000 photos stored there!  If I do, where are they?  I can't find them!   Is there something else I can do?

  I use Windows XP.  I've seen Info for Vista, but I need it for XP.

  ========================================
  The MS Digital Image Library maintains a proprietary database
  named Pictures.pd3 who is not deleted when the program is
  uninstalled/reinstalled.

  If you rename Pictures.pd3 to Pictures.OLD... the next time you
  Open the library, it will be because it was the first opening.

  Windows XP... the Pictures.pd3 database file is located at:

  C:\Documents and Settings\.
  Local Settings\Application Data\Microsoft\
  POD\Pictures.Pd3

  If you can't find the file, open a file and
  Reach... Tools / Folder Options / View tab on...
  Tick... Display the hidden files and folders / apply / OK.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• 9401 buffered output digital clock sample source

  Hi, I would like to generate a pulse train with a defined number of pulses, according to a defined periodicity. I use a NI9401 module in the Groove 3 CompactDAQ chassis so that I can write the required buffer sample 2047 pulse train. The problem I have is I am unable to choose any clock source slower than the time base of 100 kHz, which means that the buffer can underflow very easily. I would use a 4 kHz clock source, but cannot find how do. If I want to generate a source of the clock of one of the counters, I must have the 9401 in slots 6 or 7 which then do not allow for generation of digital signals in the buffer...

  Hi, JPP,.

  Access to internal counters, even if modules are connected in the Groove 1-4 of the cDAQ chassis. Note this site 6 & 7 are necessary only if you need external access to counters as task of counter in the buffer, the measures of frequency/period, etc... Since in your application, all you need is to generate a continuous pulse train and access its output internally to clock output your digital correlated, this shouldn't be a problem with your DIO module into the Groove 4. Please take a look at the following link for more information.

  With the help of internal counters on one NOR cDAQ-9172 as a sample for other tasks clock

  http://digital.NI.com/public.nsf/allkb/EEB574335BA0B4EB862572060055E9DD?OpenDocument

  I would also like to refer to an example on our site which shows you how to use your correlated digital i/o clock counter. I hope this helps.

  NOR-DAQmx: Digital Correlation of e/s with NI CompactDAQ and LabVIEW

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5256

• How to use NIDAQmx to determine the number of lines correlated DIO?

  How can I used NIDAQmx to determine the number of correlated DIO lines that supports a device?  For example, the NI6225 supports 8 correlated digital of/s lines while the NI6229 supports 16 correlated digital of/s lines.  How can I used NIDAQmx to determine the NI6225 supports only 8 lines while the NI6229 supports 16 lines?

  I moved this question from a previous thread.

  Thank you

  Ian

  Here is a code snippet that implements the regular expression detection:

  

• 400 pictures, Flipbook, insert 4 images on 1 page, automatic

  Hey there,

  The idea is to create and print a flipbook. 2 small of one and the other is near 400 larger images. I need to know how can I easily insert 4 photos in a special format as the German standard A6 on a German A4 paper. Up to 4 Images on 1 page. Is it possible to do it automatically?

  PS CC 2015 is my version and the Images are digital. Its an After effects project. If I try to use Media encoder but it was unnecessary to insert on a new document in PS, because the size was bigger then my output resolution. After that I inserted in Ps it has increased, for I don't know what reason?

  Some help would be cool! :-)

  Best regards Mischel Mansor

  I suggest you choose the exit of the bridge > Pdf feature set to A4, two lines, two columns and other adjustable options

• Supprimer delete photos on iPhone, keep on mac using ICloud?

  Hello! How do I remove photos from my iPhone and always keep them on my mac? I use iCloud and have about 50 GB of Photos on my phone. My plan is bigger than that, but again, I don't want to have that many photos on my iPhone (but keep them on my mac). Is this possible? I tried to import on my Mac, but it doesn't show me all the pictures are on my phone. It shows me about 3000 instead of 11000... TIA

  Julievite g ' Day,.

  Thank you for using communities of Apple Support.

  I see that you want to remove photos from your iPhone, but still keep the photos on your Mac. Use the article import pictures and videos from your iPhone, iPad or iPod touch to import all the photos from your iPhone to your Mac, more specifically, this section:

  Import into your Mac.

  You can use Photos for OS X to import photos from your iOS device to your Mac without using iCloud photo library. This procedure also works for the import of images from digital cameras and SD cards.

  1. Connect your iPhone, iPad, iPod touch, or digital camera to your Mac with a USB cable. If you use an SD card, insert it into the SD slot on your Mac, or connect using a card reader.
  2. You need to unlock your iOS device using your access code. You can also see a prompt on the device iOS asking you to Trust This Computer. Tap the confidence to continue.
  3. On your Mac, the Photos app automatically opens. If not, open the Photos app.
  4. The Photos app shows a screen of import with all photos and videos that can be found on the connected device. If the import screen does not automatically appear, click the Import tab at the top of the Photos app, or click on the name of the device in the sidebar of Photos.
  5. To import a selection of photos, click the ones you want, and then click Import selection. To import all new pictures, click Import all Photos again.
  6. 
  7. Once the import is complete, a message asks if you want to delete or keep the photos on your device. Click on remove items to remove photos or click on keep items to keep them on the device.
     If you select keep items, you will need to remove them directly from your device when you want to remove.
  8. You can now disconnect your device from your Mac. If you imported photos from an SD card or USB, safely eject the device first device.

  Imported photos appear in the album last import of the Photos app.

  Photos and videos that sync you from your computer on your device iOS through iTunes can be imported to your computer.

  Know what to do If you can not import pictures from your iPhone, iPad, or iPod touch to your computer.

  Once you have made sure all the photos have been imported to your Mac, you can then safely remove them from your iPhone. The iPhone user guide has the steps to remove photos from your iPhone, in particular, this section:

  Delete a picture or video from pictures. Click on the Photos tab, tap the photo or video, press on , then press to remove the Photo or video delete. Deleted photos and videos are stored in the album recently deleted on iPhone, with a badge showing the remaining days until the item is permanently deleted from the iPhone. To permanently delete the photo or video before the days expire, tap the item, tap on delete, then remove the Photo or video delete. If you use iCloud photo library, deleted photos and videos are permanently removed from all your devices using iCloud photo library with the same Apple ID.

  See you soon!

• G6-2032tx: I LOST MY CD of DRIVERS AND WINDOWS7

  Hello! I lost the windows7 64 bit OS and the cd of drivers of my g6 g6-2032tx Pavilion. I have reformat with windows7 32 bit OS but when I look for the drivers in this site, the 32 bit OS is not drivers. Please send me copy of windows7 64 bit OS. Thanks, Moises

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the Disk Image correct ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  The source of the Windows Image is Digital River.

  Windows 7 Home Premium 64 bit SP1.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Kind regards

  DP - K

• Video of DV scrambled on A60

  DV Canon camcorder MV20 detected by my A60-199 new via the firewire port, but the video image is digitally encoded on play when I try to capture or display. Exit camcorder tested elsewhere and that's OK. FireWire port seems OK too as the same symptoms when I sub a PCMCIA firewire on the pc. Same symptoms with different editing software so it could be a video card problem? Have checked the settings PAL and NTSC and acceleration reduced without result. Any help much appreciated... Thank you.

  [Edited by: admin April 25 05 06:50]

  Hello

  You have this problem if you want to edit movies with any program or when you watch these movies on TV screen or laptop after editing?

  If you want to send movies to cam for the laptop I really don t understand why this happens. I also have a camcorder (Sony) at home and all my movies made by oneself, I saved on the HARD drive. I also use Firewire connection for data transfer. When cam is connected to the laptop it will be immediately recognized in the Device Manager and it is ready for data transfer.

  I put t know what program you use for editing film but please check all the settings there.

  To check this, the simplest method is to use Windows movie maker. It is a very simple program for the editing of the film.

• I need a link for windows 7 starter 32 bit X 16-96078

  I need a link for windows 7 starter 32 bit X 16-96078. If possible!

  Hello

  HP do not offer a download for the recovery media option, but there are two options available.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 you can use the following method to create your own Windows 7 Starter 32-bit installation media.

  Before you try the following, make sure that you can still read all the key character product activation 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create Windows 7 installation yourself using another PC. However, it not there no download directly available for Windows 7 Starter, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 32 bit - the source of the image is Digital River).

  Windows 7 Home Premium 32 bit SP1.

  For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer - the section that require you to edit the ISO is Step 1 DVD universal (although you will create an installer from usb, the method to change the ISO is the same).

  http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

  Once done, use an application like Rufus to create a bootable Windows 7 usb flash drive.

  Use the Flash drive to perform the installation, enter the activation key of Windows on the label of the COA in the request and one time Setup is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need for your laptop, software and additional pilots are in entering either the complete model number or Nr here.

  Kind regards

  DP - K