image is displayed on the camera

Similar Questions

• Powers on my computer, but no image is displayed on the screen.

  Powers on my computer, but no image is displayed on the screen.

  You forgot to tell us something about your computer. You hear any sound from the computer at all once you turn it on, it? It sounds like the hard drive turning upward? You see absolutely nothing on the screen? Be more descriptive and include information about your computer (computer desk/computer laptop/brand-model), his age, and precisely what happens when you turn on the computer. It is a hardware problem and narrowing of component that failed is not possible without more information from you.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can't do the work yourself (and there is no shame in admitting this isn't your cup of tea), take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).

  MS - MVP - Elephant Boy computers - don't panic!

• RX100 ii how to take and keep 3 raw bracketed images and no not the camera to do hdr

  RX100 ii how to take and keep 3 raw bracketed images and no not the camera to do hdr.

  I want to have 3 separate raw images so that I can do HDR etc myself. How to configure this for example. + 1 0 - 1 EV exhibitions and be able to treat myself.  I want to be able to do this hand and align etc. later. I'd be satisfied with +.7 ev 0-. 7 if that's all he can do.

  Hi doshin! You can set the camera   (support: suite) by going into MENU 2 [Drive Mode]. In this mode, the camera allows you to shoot in 3 different exposures. You can also set the value of the show of support.

  If my post answered your question, please mark it as "accept as a Solution.

• JPEG image is displayed in the selected image files folder

  When the discovery of the computer and selecting the image file folder - I use to get the small real individual images of each image in the folder without having to enter in the Windows Photo Gallery.  Now, I have only an icon, the same as that for each of the images and the only way I can see that the actual image is to select a specific icon and hope that is the image I'm looking for.  Can someone tell me how I can get all the individual photos in the folder of image file to display when I select that folder?

  Hi looking, advanced

  Thank you for visiting Microsoft Answers.

  I first suggest you to change the display of the photo icons folder type medium or large icons and check if that helps.

  To do this, follow these steps:

  Open the photo folder. Click view > select icons medium or large icons.

  Make sure that default programs > associate a file or protocol type with a program, file types .bmp, .ico, DIBs, .jfif, .jpeg, .jpe, .png, .png, .tiff, .tif, .wdp file names must have the default program like Windows Photo Gallery.

  Otherwise, select the type of file name, click on change program and browse to choose as default Windows Photo Gallery.

  Additionally, set the global folder options

  To specify the global settings that apply to all folders, follow these steps:

  1. Click Start, click Control Panel, and then double-click Folder Options.
  2. On the general tab, click the options you want.
  3. In the view tab, click the options you want.
  4. Click OK.

  Note To restore the default settings for all folders, click restore defaults on the general tab or on the view tab.

  Use the same display settings for all folders

  You can apply the same view settings to all folders on your computer. You cannot apply the same view settings for all folders, images icons, toolbar settings or tasks folder. To apply the same view settings to all folders, follow these steps:

  1. Locate and open the folder which includes the display setting you want to use for all folders.
  2. On the Tools menu, click Folder Options.
  3. On the view tab, click apply to all folders.
  4. Click Yes, and then click OK.

  Note To reset all folders to the default display settings, repeat these steps, but click reset all folders in step 3.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to get the image to display on the Blackberry screen URL

  Hi all

  I'm setting up a Blackberry java application. I have a url to the image... (as you can tell "http://www.christianfilmdatabase.com/wp-content/uploads/2013/06/Movies.jpg"). I get this image dynamically and display on my screen. ... How can I do it... I post my code here...

  Bitmap bitmap = Bitmap.getBitmapResource(imageUrl);
  
                      Background background = BackgroundFactory.createBitmapBackground(bitmap);
  

  Best regards,

  Thank you very much, Peter... Now, I could get the web images and display them on the screen...

• How to customize the display of the camera

  Hello everyone.

  I use the camera in my application. I used this code to get the camera displayed in my application:

          /**
       * Instance of {@see javax.microedition.media.Player} used to manage medias.
       */
      private Player player;
  
      /**
       * The video control..
       */
      private VideoControl videoControl;
  
      /**
       * The vertical layout used to display the camera
       */
      private VerticalFieldManager vfm = new VerticalFieldManager(Field.FIELD_VCENTER);
  
      /**
       * Default constructor.
       */
      public ScanScreen()
      {
          super(NO_VERTICAL_SCROLL);
  
          //Initialize the player.
          try
          {
              this.player = javax.microedition.media.Manager.createPlayer("capture://video?encoding=jpeg&width=1024&height=768");
              this.player.realize();
              this.player.prefetch();
              this.videoControl = (VideoControl) this.player.getControl("VideoControl");
  
              if(this.videoControl != null)
              {
                  // Initialize the field where the content of the camera shall be displayed.
                  Field videoField = (Field) this.videoControl.initDisplayMode(VideoControl.USE_GUI_PRIMITIVE, "net.rim.device.api.ui.Field");
  
                  // Display the video control.
                  this.videoControl.setDisplayFullScreen(true);
                  this.videoControl.setVisible(true);
  
                  // Start the player.
                  this.player.start();
  
                  // Add the video field to the main screen.
                  if(videoField != null)
                  {
                      this.vfm.add(videoField);
                  }
                  else
                  {
                      LabelField sorry = new LabelField("Sorry, we cannot use camera right now.");
                      this.vfm.add(sorry);
                  }
              }
          }
          catch(Exception e)
          {
          }
              this.add(this.vfm);
      }
  

  The fact is that the camera covers the entire screen; because of the (true) setFullScreen? But if I remove it and use setDisplayPosition and setDisplaySize, nothing is displayed.

  So, how can I do to make the camera photo displayed in a certain part of the screen (for example a centered window of 240 x 320) and display specific buttons at the top of the screen?

  Thanks in advance.

  As a heads-up, the viewfinder does not any third-party display anything on top of it. From my experience (although I may have been something wrong) I couldn't do two sizes in the viewfinder, full screen and the other half of the screen. If you send odd dimensions it simply not display itself, even if it seems that you should be in him passing the legitimate parameters.

• I have a problem with the canon 5dsr with Lightroom 6 connection I can't drop images directly in Lightroom the camera connected only by the EOS utility help

  I have a problem with the canon 5dsr with Lightroom 6 connection

  I can't drop images directly in Lightroom

  The camera connected only by EOS utility

  Help, please

  Hi mateuszm,

  You cannot drop images directly in Lightroom.

  You need access to the file menu in Lightroom 6 > import Photoshop > and choose your camera as source > select the images to import and import.

• Does anyone have the imaging software photo to the camera HP 315 copy the picture from the camera to the pc?

  I got a digital camera HP 315 (circa 2000), but without the CD-ROM containing the photo imaging software to copy pictures directly from the camera to my pc.  I installed Windows 7.  Currently, I can copy directly from the card compact flash on my pc, but it is sometimes easier to copy directly from my camera to my pc.

  Hello

  As mentioned above, the old software may not work at all. You can try the following software:

  http://ftp.HP.com/pub/softlib/software2/COL3927/SJ-13026-3/col3927.exe

  There is another way to transfer photos to your computer, because the camera uses the card see You can also its Manual:

  http://h10032.www1.HP.com/CTG/manual/bpy60034.PDF

  Kind regards

  PS. New digital cameras released each month, you can buy one for less than $100 with a better quality and faster now.

• Posterlization/Banding Office of the colors displayed in the camera «D610» profiles

  Greetings,

  I have several question of the color of the strips/posterlization the selection of camera calibration tab portrait profile camera LR.

  My image is a D610 Nikon SLR RAW file and the color of the strips into shadow shows quite clearly when the zoom to 100%.

  Surprisingly, all as Vivid, Neutral, Standard and Lancscape camera profiles are the same color of the strips. So I have no choice except using the Adobe Standard profile which I prefer not to due to my customer's requirement.

  However, I also meet this same problem as well in RAW D700 file during post-processing in LR. But the problem can be solved easily by changing just the old profile of the camera to the new V4 version.

  I use Lightroom 5.7.1 64-bit Macintosh. Is there anyone facing this problem like me? because most of my photos is photographed by D610 and this problem bothers me a lot.

  Any suggestion given to me would be much appreciated.

  Thank you

  Boyd

  1 D610 - camera Portrait profile - color banding issue

  2 D700 - portrait camera profile - color banding issue

  3 D700 - camera Portrait profile V4 - problem solved

  Here is what I see using the latest plugin cab 9, which was equivalent to the more recent treatment programs 6 LR and LR CC 2015, so a version of the problem still exists.  I'll pass this information and your sample NAVE along Adobe and hopefully they can fix in the next version, but if LR 5 can be fixed, I'm not sure.  Assuming that Adobe releases new profiles for the D610 with the next version of LR and ACR (6.2, 9.3) then you would hack things LR 5.7 installing the DNG Converter 9.3 (or whatever version a better profile) then copy into folder LR resources on top of the older profiles, or at least put in the library user profile location well if old and new profiles have the same name Maybe you couldn't access one you wanted.

  

• No image is displayed when the file is opened, unless it is moved

  Hello

  I installed Photoshop CS4 x 64 on Windows 7 x 64 (RC) and when I open an image (any image file), it is not displayed in Photoshop. This is a clean install on a new PC. I see the tab (and the window) that photoshop displays for an image, but there is no image inside data. The only way I can see the image is if I drag the tab (turning them into a window), once I drop from the window, the image data are not yet visible. I get the same issue with Photoshop CS4 (x 86).

  Has anyone else seen this before? I updated my video card drivers, and I installed the drivers for my monitors (although I do not believe in the monitor drivers!).

  Any help will be appreciated.

  -em_raza

  Try to disable OpenGL in the preferences.

  Also tell us:

  Amount of RAM installed
  Free hard drive capacity
  Brand and model number of the video card

• WVC210 display of the camera does not

  Hello

  I have a wvc210, the small LCD screen on the camera does not do anything, so I can't determine what IP it works stop. The lights work and it starts ok.

  Any suggestions?

  Hello

  First of all, I'm sorry that you are having problems with the camera.

  My first recommendation would be for you to contact the support center at 866-606-1866 so that we can determine if the device is under warranty and replace it.

  If that's not an option, or you already know the product is supported and given that the device works properly, what you can do is look in the DHCP table and find the MAC address of the camera, in this way you now the IP address that uses and will be able to connect to it.

  In addition, if it is not an option, you can download a network scanner (several free on the internet, as always, Google is your friend), the scanner and find the MAC address.

  Once you have found the address, connect to the device and assign a static IP address so you will always know how to access.

  I hope that was helpful.

• How to block pornographic images is displayed in the image search

  When I do a search for a person and then select a display of images for this person, I get a variety of porn images rigged this person mixed on the screen. I think that at some point I turned off a filter, but now I don't know how to turn it back on.
  Any help please
  Tuskertek

  This aid? You will get no help from others, unless you answer.

• Photos appear white and cannot get images to display on the photos

  Original title: I CANNOT GET PICTURES TO DISPLAY ON THUMNAILS, THEY APPEAR as WHITE, WITH a RECORD #, WHY?

  WHEN I NAVIGATE TO UPLOAD PICTURES, MY PICTURES APPEAR IN WHITE, WITH A FILE # BELOW THEM, I CAN'T S EE THE MINIATURE OF THE PHOTOS, I DID CHANGE SOMETHING?

  Hi marvin z..

  1. are you using Windows Photo gallery?

  2. were you able to view a thumbnail preview?

  2. you remember to make changes to the computer before this problem?

  You need enable preview of thumbnails in the navigation pane.

  a. open the pictures folder by clicking the Start button, click photos.

  b. in the Navigation pane, click the folder that contains the images that you want to display.

  All images in this folder are displayed.

  c. click on the arrow next to the view button and then move the slider to change the size of thumbnails.

  Check out the link:

  View and print picture thumbnails

  http://Windows.Microsoft.com/en-us/Windows-Vista/view-and-print-picture-thumbnails

  Also check out the link:

  Change the thumbnail size details and file

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-thumbnail-size-and-file-details

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• SX80 Multi display of the camera by the bridge of the video: How does this look?

  I read some documents, but I'm a bit confused as to what it would actually look like.

  We have a Codian Cisco with a MSE8510 of Cisco blade to fill and TMS/VCSC/VCSE allows to manage internal and external calls. All our endpoints are of SX20 or Polycom HDX7000 but we want to upgrade a conference room. I am curious about the SX80 with several Precision HD cameras and how it showed itself to others in a multipoint conference on the bridge.

  I noticed several addresses IP can be assigned is so essentially as having three distinct end points in one? Each camera can be assigned its own pane within the Conference or will be they are all Pasty in a pane this is configurable on the endpoint itself?

  Remember that the MSE8510 made multiplexing, so we would use the functionality of custom models to assign different cameras on various aspects.

  Any help is greatly appreciated.

  The SX80 can support multiple cameras, but like any other endpoint, the codec may send a main video streams at the same time.  If the SX80 running TC software, you can use TC Console to composite different cameras in one video stream, which can then be displayed as your main source of video to the Conference, that would make all your cameras appear within a single video section on the MCU.

• Why develop module only show main image in "display of the histogram.

  I use Lightroom CC 6.1 on a laptop. Some time ago, Lightroom startet showing the main image to develop module in a way that only appear in color, almost like a type of the histogram display. If I use before and after comparison, before is fine - then after the weird colors show. Everyone makes the experience - and how to fix it?

  

  Hi Molha,

  I suggest you to please update of Lightroom to the latest version, 6.5: http://blogs.adobe.com/lightroomjournal/2013/06/keeping-lightroom-up-to-date.html

  Also try:

  • Go to Lightroom > Preferences.
  • Also please go to preferences > Performance tab and uncheck the box "use graphics processor.
  • Restart Lightroom and see if it works.

  Kind regards

  Tanuj