Image of Bishop Bootmngr is corrupted, the system may not start

Similar Questions

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Download it "Boot Manager is damaged, the system will not start" after changing a hard drive.

  Original title: where and how to get the installation to win 8 pro 64 bit oem disc

  Please community, help me. First of all, I have upgraded to win 10 and it works well. So I decided to start from scratch and got a bigger hard drive and reinstall win 8. I did successfully, but when I rebooted the computer, I received a statement that says "Boot Manager is damaged, the system cannot start ', which is why I am now looking for a start or install disk for win 8 64 bit oem. I was not able to start since I received the message. Help, please.

  Hello

  Maybe that's a problem, but you can try...

  You can try to download the ISO of Windows 8 from the following link:

  Download the .exe installation of:

  http://Web.ESD.Microsoft.com/W8DL/WSEC5B1D8A9DFDFD92DFB736C5B1D8956B5B1D8/Windows8-Setup.exe

  Click on Setup.exe. The wizard of Windows 8 will begin. Enter your key of Windows 8 and press Next.

  Click install now and let the full download.

  The installation files will be stored by default in the C:\ESD\Windows folder.

  When the "Install Windows 8" message is displayed, select 'Install by creating media' to create a bootable USB key or .iso (a disk image) file. Chose a folder to store the image, for example "Windows.iso.

  OR... http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

  If this does not work, see this thread...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/trying-to-update-from-Vista/2dd14d77-E68A-43ad-b53e-7a1afaf1d410

  BTW... You can download an ISO of 8.1 Win or create media from here...

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

• 750-103D want: I want to install a 3rd HARD drive but the system will not start

  Desktop motherboard has 5 heads SATA (of which 2 were used for the first DvD and HARD disk in the original Setup) and the box has 3 bays for HARD drive, but there is no additional power from the PSU cable.

  I installed a new SSD as my main and designated record the 1 TB of HARD drive that came with the desktop as my secondary school and office works just great.

  Now I tried to install an another 1.5 TB HARD drive for storage. I used a SATA power cable Y (1 male to 2 females) to extend the existing cable. However, to my great disappointment, the system is unable to start up. I guess that supply POWER 300 watts current is insufficient to start 3 disks to a single supply with extension cable.

  Issues related to the:

  1] sells HP a 500-watt power supply with power cable for SATA 3 HARD drive?

  [2] is a compatible power supply on the market (ie. not HP) who can stand in 750-103D envy? Brand/model and how much?

  Thank you.

  Hello

  Probably, you have misunderstood my response.  Unplug the original HD boot drive.

  Your question is not the power supply lack of insufficient power.  I have observed remains with HP computers with a power supply that would support three HDs off a 300 Watt SATA power cable voltage.

  Perhaps the third HD is formatted incorrectly or is defective.  The other possibility is that your SATA Y cable connection is defective.  You also need good 5V and 12V.  In addition, if you have made any hardware changes to your PC you have not indicated, then it is possible that you may need a bigger power supply.

• laptop screen does not light and the system does not start most of the time.

  my hp g62 lptop started not starting and the monitor not turns sometimess even if it lights. with the time he had this problem more frequently. now it does not start and the monitor turns at all.  It will fuel yet but it's going to be okay. Ive tried a recovery disk, but it does not start the machine or be the monitor lights. im a beginner so any help will be appreciated.

  Hello

  This may be a trial outcome disply to connect an external monitor to your laptop and see if you get display it.

  You can connect to an external monitor via VGA or HDMI connection.  The usual process to transfer the video output to an external source is to press and hold the fn key and press f4.  Use the arrow keys to select "Projector" only and press ENTER.

  http://support.HP.com/us-en/document/c02013758

  and I also found some links that may help you

  http://support.HP.com/us-en/document/c01884928

  http://support.HP.com/us-en/document/c01443371

• Update the system: does not start after upgrading to Windows Vista SP1.

  
  

  I had the same problem. Called Lenovo, the response was:

  N ' - what is Vista come with SP1? No! Then, it is not a supported configuration. You're on your own! Bye: Pei

  Well, there is a feature called "Automatic updates" and Microsoft forces you to use - and you're foolish to not use it! In any case, I hope the support to the Denmark, named Thomas, and his bosses to get a better attitude towards customer.

  My question was simple. He was missing a Windows Service called "system update". It is implemented in "C:\Program Lenovo Update\SUService.exe.

  I had register service menually. There is a tool in the .net framework called InstallUtil.exe. The SUService.exe is implemented in .net, the InstallUtil can help.

  Start a command prompt by right-clicking and choosing "run as Administrator".

  Run:

  C:\Windows\Microsoft.NET\Framework\v2.0.50727\InstallUtil.exe "C:\Program Update\SUService.exe Lenovo."

  Modification of traces according to needs. If InstallUtil.exe is missing, it could be part of the .net SDK - do some research on Google.

  Go to services (in the contral Panel - administrative tools) and start the newly created service "system update". System update now worked for me.

• Update method 5.06 Silent Install of the system will not start

  SU 5.06 installation installs fine, but the application doesn't launch. The start page will Flash for a few seconds and then it closes.

  Using the .exe and .msi file both produce the same results.

  If installation is run manually as there is no problem.

  Any idea?

  
  

• After changing the partitions may not start Vista

  Hi all

  I have problem with my Satellite L310...
  I want to a different partition. I m using paragon partition magic. After that, you are prompted to restart windows, but when I restart it I couldn t get into windows.

  There is a note "Please insert... recovery CD. ».
  How I supposed to do? If I re - install windows, I m using the original windows Vista and I haven t done a recovery CD...
  Thank you

  Hello

  Can you please tell me why you play with partitions if you didn't create recovery DVDs?

  Have you seen this Toshiba recall:
  * Important INFORMATION *.

  * your system is equipped with a hard drive recovery system. If you need repair *.
  * your computer in the restaurant to original factory State, you can do it directly *.
  * from the HDD (press F8 when you start your computer, choose 'Repair your computer' *)
  * and follow the instructions in the menu) or create a bootable recovery for this fin.* drive carrier

  * Toshiba recommends you create recovery disk medium using the "Toshiba Recovery Disc Creator."
  * to ensure that you are able to restore your computer to the factory installed state, even if your computer is severely damaged.*

  I don't know what you did exactly, but you have big problem now. Recovery image cannot be used for the installation of the OS more and cannot create recovery DVDs too.
  What you can do now is to order the new DVD of recovery under https://backupmedia.toshiba.eu/landing.aspx

  Sorry mate :(

• X 1 carbon (Gen3 20BS) may not start, nothing else than to the BIOS

  Yesterday I had a few pilots, as well as the update of the BIOS updates. BIOS seems to update successful (now its 1,14), all under BIOS works. I had 2 OS: win10 and Ubuntu with grub. I've been a happy user of all these for several months, but...

  The problem is that I can't start any OS or OS installation even after an update of pilot (which was done through Lenovo utility for Win10)! Recovery ISOs, diagnostic tools... Nothing can be started. BTW, I know how to deal with secure boot and legacy mode. I can handle start the process of starting anything listed above, but they all have the same behavior. That they freeze at the beginning. Everything that involves just ACPI hangs at startup. Linux crashes after the message "ACPI Tables successfully asked" or sth like that. Win10 displays the points that go around 1 second and then crashes. If I add "acpi = off" to Linux boot options, it starts (but almost nothing works there without acpi support). Things that do not work for ACPI. For example, I can update the BIOS of drinks ISOS. It still does not help because my BIOS version is the most recent and it does not restore.

  It cannot be the hardware problem such as it appeared after Windows drivers updated and flashed a firmware (not BIOS, but I don't know what it was exactly). I can access the data on the SSD and you can see some newspapers if necessary.

  Hope of assistance how Flash again all the firmware on laptop boot USB possible? What can be flashed with the exception of the BIOS?

  In response to customer relationships which, after a BIOS update to some ThinkPads, the system may not start, suspended at the Windows startup screen, Lenovo provided a Service COUNCIL detailing workaround. A permanent solution is provided through future BIOS update.

  The Service TIP can be found here: https://support.lenovo.com/us/en/solutions/sf16-t0079

  Thank you

• Satellite L300 - 16L: bootmgr image is corrupt. the system cannot start

  Bootmgr image is corrupt. the system cannot start

  Why is this?

  Have we lost all files etc on the laptop?

  Its a Toshiba L300 - 16L 'versatile Base '.

  Any help would be great - thanks

  Wayne

  Well, the system on the HARD drive seems to be corrupted.
  Who knows why, but it happens sometimes, it s nothing unusual and, therefore, it s always recommended to backup the data always

  The files are not lost, but you are not able to start the unit.

  What you can do?
  Well, you can grab the laptop again.
  By using the HARD drive recovery option (press F8, repair my computer, drive HARD recovery) or by using the recovery disk

  But this will format the HARD drive and you will lose data.
  If you want to get access to the data, I recommend booting of live CD WinPE and BartPE.

  Google for more details...

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• T610 with Windows Embedded 7 - the system does not license for the operating system image

  Hello community,

  I bought a refurbished computer ThinClient T610 that is running a Windows 7 Embedded English. The label on the package says, that the computer ThinClient is allowed with W7E. When I now run Easy Tools installed on the computer ThinClient hp to create a USB Image with the German language, everything works fine: the image is downloaded from the web and put on the stick.

  But after you start the stick, the installation program tells me: "the system does not license for the operating system image. What I am doing wrong? The BIOS is already the latest.

  Or y at - it another way to transform the operating system in German? There should be an option to download additional languages, but this particual window has no other options. And I have not found any manual way to download other languages.

  Concerning

  Michael

  Sometimes it can be so easy... ;-)

  So here's my solution:

  1. go on the Web for hp Support site

  2. go in the software and driver download

  3. set the language of driver on the language of your choice (in fact: it was the main problem)

  4. download an operating system image

  5. run the configuration tool and copy the image of an operating system on a flash drive

  6. restart the workstation and install the os

  7. take advantage of your computer ThinClient in the language of your choice

  I don't know, why the hp Easy Tools downloaded the image of evil, but with this solution, that I find myself at the same point, as if they did.

• Locking XP! error "the system could not log. Make sure your username and domain are correct, then type your password again.

  Original title: Locking XP!

  I tried to read all the relevant messages and walked the Earth for this solution, if someone could help me I would be grateful.

  A dear friend died and I got his PC - a fast XP with SP3 which (elderly) she only used for web & email. His account has been "Judi".

  I noticed a while back that, on the logon screen, that there is another user called 'Fiona' (she told me an old co-worker who probably stayed with her).

  Now a friend in need of a very old HP PC Lions not having completely fortunately I managed to copy his files before he was insane - I offered this newer PC it after that I have "set up" for him.

  I put a new account in place on this new PC "Ken" has been added. Then, after the deletion of accounts Judi & Fiona, I cleaned the machine with MalwareBytes, CCleaner & defrag.  All is well now with only Ken appearing on the screen logon (with an image of the appropriate icon), that I used several times in the implementation of his e-mail account and move its acrossetc files. His password is empty.

  Being the only user now Ken, I thought that it strange would its user (only) one click each time to the 'Log in', so I searched and found a box that said something to the effect «... do not show a picture of connection...» » .  That started my problem!  Removing his login "icon" brings ONLY the following - FIONA!

  When connecting a Logon Message now says "the system could not log. Make sure your username and domain are correct, then type your password again.  Letters in passwords must be typed using the proper case" the choice for this error message is 'OK', which takes you to a login screen 'Type Win98' older Classic looking (no icon user) who was behind this logon Message, with (name) Fiona appears on the login screen (former) (full name and empty below the password) , with the choice to enter the password or a stop!

  Of course the password cannot be guessed (Yes - tried blank, admin, etc.) so the only choice is to stop.

  VA F8 at startup for 'Safe mode' goes to screen black WITH Fiona login screen as usual safe mode above and booting with the CD using NTPASSWD shows the usual 1) Administrator 2) 3) invited Ken and 4) Support Microsoft - NO FIONA is shown - and I put all these passwords to 'empty '. Of course repair and recovery repair 'R' does nothing on the removal of Fiona

  This translates the original message & Fiona connection again.  How can I return to screen "image icon" connection without losing files and mail Ken Ken. Where Fiona could hide when it is not a USER of the NET?

  Yet once again, I'd appreciate any help. Brian.

  You should be able to just select (click on) "Fiona", press the delete key, and then type any desired account name.  It doesn't work?

  If you cannot type on "Fiona" in the logon window, you can use the following procedure to modify the Windows registry... or you can take the computer to an independent repairer and ask them to fix it for you.  Don't go to a chain of stores, as a "geek squad" or BigBoxStoreUSA type of place.

  Go here--> https://www.raymond.cc/blog/how-to-edit-windows-registry-key-values-without-booting-in-windows/

  Choose method 1 or method 2.  I'm familiar with Hiren (method 2), but not with the program described in method 1 (even though it seems simple).  Any ISO file you choose, I suggest to download and use ImgBurn (free) to create your CD bootable from the downloaded ISO file.

  The registry key to change is in the same place as "userinit" (which is the example used in the article), so to follow 1-5 step method or method 2 for step 7.

  You will be at HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion\Winlogon

  In the right pane of the registry editor, you will see a large list of items.  Scroll down the page until you see LogonType and double-click it.

  In the "Value data" box, type 1, and click OK (1 is the same either hexadecimal or decimal).

  Close the registry editor, take the CD from the drive and reboot.  You should see the Welcome screen when Windows restarts.

• The system could not find the environment option that was entered.

  I have Vista Home Premium. I must have met a significant corruption or a virus. Here's what the system won't let me do.

  System restore
  Launch any program exe
  run cmd as administrator
  launch msconfig
  Basically, everything I download don't throw (including several ladies virus recommended this forum and others)
  If it's a virus, he got by AVG free edition
  Safe mode does not enable all the options I get always "the system could not find the environment option that was entered."
  It of almost as if someone really took time to reflect on how to thwart an attack and then implemented in the opposite direction.

  Is blowing the entire disk and back at my only option?

  Help!; 0

  Zitouni,

  Thanks for your reply, good point on the File Checker, I didn't know that. Unforuneatly I have not see your reply until I decided it was time to re - install the system. One thing to note, I couldn't do a 'run as administrator' anyway possible. This system was really corrupt which leads me to believe that he may have been a NTFS/Fat 32 Co-mingling question. Just a guess, but I really don't see how it could have happened otherwise.

  Another thing to note, if you have a Dell Inspiron 1720 with a 250Gig HD-make sure that you format the partition, you then load the SATA drivers! Also, make sure that the restore partition does not primary. Make sure that you format (assuming that you have backed up your data before!). Otherwise, it hangs on Setup to complete the installation. Who took me ahwhile to understand.

  Everything is cool now (reinstalled Vista), just thank ful there is a site like this to run things by! ;)

  Concerning

  Jeff