image on my screen

Similar Questions

• Qosmio X 300 - no image on the screen

  I have a problem with a display on laptop screen. When the computer sometimes see the boot screen, sometimes not. In both cases, the laptop does work correctly only no image on the screen. Switch to an external monitor, the image is ok. also to a normal startup (when I can see the photo) after a few minutes of work normal black "fade to" screen and the laptop still works correctly. I at this time here that I try to get the combination of keys - FN display on a report of external monitor to the current image on the laptop, which diseappears after two seconds. Once the laptop is broken for several hours, sometimes the system starts normally and the laptop runs normally five to ten minutes. Of course the image on the external monitor is always ok. I installed win 10,8,7 and I still had the same problems. I have bud inverter but that did not help. The next thing to try would be a replacement for laptop screen cable and a screen, but I fear that there would be no help. What to do? Can there be a malfunction in the backlight if screen sometimes works ok?

  Problem has been lighting... When change laptop screen laptop start at normal work...

• Satellite Pro M10: image on the screen is very dark

  I have a portable Satellite Pro M10, which has a black screen, i.e. the backlight does not work. There is an image on the screen, but it is very dark. When you connect an external monitor, I get a normal picture on this screen.

  Information from other messages here, I conclude that there is a problem with the backlight of the lcd screen or the inverter. I checked all connections, but it does not solve the problem. If I bring the laptop to a service center how much it will cost about for repair? The thing is 2-3 years, so if it is very expensive I could better get a new laptop.

  I'm sure I'll be able to change the inverter Board myself, but how am I going to be able to determine that the inverter is the problem? How to get a new inverter? Is anyone of you know the number of good product?

  My Pro M10 itself has PS630E-G205Z-OF product number.

  Hello

  I agree with Tobi. You sounds description as a faulty FL inverter.
  This part is placed behind the LCD screen under the lid.
  As mentioned this part isn t very expensive and you could order the partner of Toshiba service in your country. But be aware that if you have no experience of replacement if you ask technicians for assistance.

• How to stop the image on my screen sliding upwards

  In Safari, the image on my screen often slides up under the menu bar leaving a single line that can be clicked to restore the image. Although this may seem a minor issue it is intensely irritating and help to stop the problem would be much appreciated.

  I think a screenshot is needed to clarify what you see.

• Optimize the image to full screen 2D control

  Hi, I'm update programmatically control of 2D image to full screen size.  Is there a way to do this?

  I know that you can maximize the façade to the fulll screen but I have been unable to develop a method which allows me to do that for a 2D image control.

  Thanks for your help!

  You can adapt the 2D image control to the front of your VI by selecting (using right-click) 'Fit Control Panel' and then 'ladder with component object. If you will maximize the VI, control of the 2D image display screen.

• Double-click the event on a specific part of an Image to the screen

  Hi all.

  Thank you very much for reading this post and be able to help.

  I want to catch an event of doble click on an Image to the screen.

  The poblem is that I don't want to catch it if the user has clicked on 'Section of the Image' the display of the Image, I want to catch it only if the user has clicked on the edge of the Image to the screen. Is it possible to know where in the Image was clicked by the user?

  Thank you very much!!

  In fact, you can obtain the coordinates of the mouse click, and if it is not within your area of the image, you can catch it.

• is my dead of the computer runs at the start of the very strong and constant fan and I get no screen, no log in or any image on the screen at any time

  is my dead of the computer runs at the start of the very strong and constant fan and I get no screen, no log in or any image on the screen at any time

  No doubt.  If in doubt, download qualified help to solve the problem. It can be easily fixed, or not.  We cannot tell from here.

• Images on the screen are HUGE. Can you help me with this?

  The images on my screen are HUGE. I can't read a page without sweeping left and right.  If I try to play a game, it is impossible, because the game does not appear.  This has happened without any changes to the computer.  In addition, several times when I go on Facebook, the police is so small I can't read, I have to click on 'zoom' and set it to 125 in order to read it.  An example of how out of whack it is, when I turn on my computer, there is a circle of color just before the authentication page rises and this circle is now an oval.  Please can someone give me detailed instructions on how to solve this problem.  Don't forget I'm a novice on the computer and don't know most of the 'computer language' thank you very much in advance. LATER THAT DAY... Problem solved, thanks to you all.

  Right-click on your desktop, click Customize, then click the bottom display settings and you can change the resolution in the new window that opens

• How to change the width of the image on the screen?

  How can I change the width of the images on my screen?  Everyone seems wide.  How depressing!

  It may be interesting to try to change the resolution of your screen.

  See the following...

  Windows Vista change screen resolution
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution Get the best display on your monitor
  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

• Image on the screen will continuously to a darker color, then back to normal colors.

  Original title: display dims

  Recently the image on my screen constantly hard a darker color, then go back to normal colors.

  It happens during the startup process, update the content on a dynamic web page (including the mouse over events) and when I move the mouse on quick start icons in the taskbar.  It is also occurring in the mmo game, which is more annoying.

  Any suggestions on how to fix this?

  Thanks for the suggestion.  I'll keep it in mind.

  When I posted this question I had brought no other than Windows updates recent changes.  I had been a few days, see evidence of the problem at each start.

  Last night I rolled the system back a few days earlier and have since had two on two boots in which the problem appeared.  If it returns then I will try to update the graphics driver.

• How to reduce the size of the font of the images on the screen?

  I don't know how I did it, but the images on my screen are very big and I don't know how to bring them back to normal.
  I understand that it is good for people with visual impairments.

  Try this:

  Right-click on your desktop.
  Choose Customize
  In the left pane of personalization, click on 'font size to adjust it (CIO).
  Click 'Continue' on the control of user Accoount
  On the scale of IPR, check on the option button before 'Default scale (96 DPI) - fit more information'
  Click 'Apply', and then the buttons "OK".

• the monitor can not display any image on the screen. CPU power button is lit orange instead of green.

  Original title: I have absolutely no idea of what is wrong with my Dell Dimension C521 Windows Vista (x 86)

  It is impossible to display an image on the screen. CPU power button is lit orange instead of green.

  See page 47 of the owner's manual

  http://support.Dell.com/support/eDOCS/systems/dimc521/en/OM_EN/RP333A00.PDF

• The image on the screen too large.

  For reasons unknown to me, the trcture that is displayed on the screen of my Toshiba laptop now exceeds the size of the picture by a considerable amount and I am constantly move the image left and right up and down using the arrow keys. Can I have unconsciously created this problem since I was a newcomer to this kind of thing from PC. Thanks for help.
  Also a friend told me that I should look in the aspect of "Resolution". I tried without success.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  Then:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• How to add the background image to the screen

  Hi all

  I want to add the background image to the main screen how can I do it.

  On the main screen, I used

  -a manager of HorizontalFieldManagerField to view the bitmapField (horizontally).

  -a manager of VerticalFieldManagerField to view the bitmapField (vertically).

  already images of display screen (bitmap field) with Horizontal and Vertical Manager, but I also want to display the background image for the screen, how can I reach this help me please.

  Concerning

  Adkins

  Thanks for all the response, I tried and sloved logic here how I did

   VerticalFieldManager mainVerticalManager = new VerticalFieldManager(Manager.NON_FOCUSABLE|Manager.NO_HORIZONTAL_SCROLL|Manager.NO_VERTICAL_SCROLL){
              protected void paintBackground(Graphics graphics)
           {  
  
           }
           protected void sublayout( int maxWidth, int maxHeight )
           {
  
           }
          };
  
  then i added other to manager on to this
  

  My problem is sloved thank you for the reply

• Adding image to the screen only half of the image is displayed

  Hello

  I'm trying to add an image to the screen of my application, like this:

  BasicEditField _bef = new BasicEditField(){
      public void paint(Graphics _g){
  
  Bitmap _bitmap = Bitmap.getBitmapResource("3.png");
  _g.drawBitmap(0, 0,  _bitmap.getWidth(), _bitmap.getHeight(), _bitmap, 0, 0);
  
      super.paint(_g);
      }//end of paint
  };
  
  _verticalFieldManager.add(_bef);
  

  the strange thing is that only a part of the image is displayed and I don't know why! I have test it on bb 9000, so I know it has 480 x 320 and my picture is 480 x 176, so it must be shown.

  is anyone of you know what can be wrong?

  Kind regards

  Misty

  OK, I'm surprised that adding text did not work.  Apologies for suggesting it.  Can you tell me what JDE level you try and I have a go here.

  Anyway, the normal way to display a bitmap using a BitmapField.  This should always give you the entire Bitmap.  Give it a try.  You won't have to replace the paint using a BitmapField!

• How to load an image on the screen?

  Purpose: Load an image on the screen.

  Error: I can load the button and the label on the screen, except an image.

  Question: something wrong in my code? or other parameters must be implemented. (bar_descriptor.xml, ownership of the project, etc.).

  Mini code:

  #include

  Test::test (bb::cascades:Application * app):
  QObject (app)
  {

  Container * imageContainer = new Container();

  day = ImageView::create ("asset/myDefaultImage.jpg");
  "asset:///myDefaultImage.jpg" in case of failure
  asset/myDefaultImage.jpg failure
  day-> setVisible (true);

  imageContainer-> add (day);

  App-> setScene(Page::create().content(imageContainer));)

  }

  HPP

  The class test: public QObject
  {
  Q_OBJECT

  public:
  Test (bb::cascades:Application * app);
  ~ Test();

  private:
  ImageView * day;

  };

  Thank you for your attention,

  Final Soluton:

  Declare assets in the bar - descriptor.xml

  assets