Images and tables is inserted automatically

Similar Questions

• How to set up the images and captions after the import of Word 2007

  I have three general issues (ID CS4):

  • I haveMagi are placed inside the text block. How could I place them in any other place easily? If I try with the holding of the left button of the mouse, which is not possible. I have to cut it and paste it again. What is this possible.
  • How to create captions for the images and tables? I get Word of text style with a description. Maybe I need to number the pictures and tables. The common question is: is it necessary to number of images and tables in the SW user manual? I've seen a lot of documentations and there were not counted. There are common rules, when it is necessary to dial it and when not? If yes how can I do such a legend in InDesign? I tried it and I am so far, I can do it in a separate text frame for counter with text. It is the only way?
  • Import of untied the size table and the table is placed off the page. I didn't understand why ID has not regained the same size in Word 2007

  Please see my file:
  http://www.FlashMedia.cz/temp/import_word_2007.indd

  I answered this question, and we had a lively discussion. Yes, you

  create a separate text for captions. You can use automatic

  numbers, or type numbers in itself. If you do not understand the

  words in the discussion, or if you need more "hand holding" Guide

  through, I suggest that you look for some tutorials online.

  -

• To insert the image in table

  Hi frntz,
  Can I know how to insert the image into the table.

  Type column must be BLOB, and you can insert the image through an application.

  Navigate on this

  http://www.DBA-Oracle.com/t_storing_insert_photo_pictures_tables.htm

  Published by: Oceaner on April 19, 2012 05:10

• Addition of the new Image and text to an existing Page created with Tables

  Work in DW 5.5

  I try to add a new image/link and a small amount of text to an existing web page that was created with tables and centered.  I use AP div tags. One for the image and one for the text.  Everything works fine, but I can't get the new anchor points and to re - center with the rest of the page.  I'm not able to get around the "absolute positioning".  I tried different solutions of various tutorials but I can't make them work with tables.

  Added items are a Facebook button and text.

  Go to: http://www.sugarhollowfarms.NET/index.html See the problem.

  Help, please. I'm not that experienced.

  First, make a back up of the page before you implement the changes below!

  Take the bit of code below to

  ...... to..........

  and insert it directly after the opening tag div FWTableContainer and before your opening table tag (see location below):

  ">

  Join us
  

  on Facebook

  Then add - position: relative; -to the css of FWTableContainer (as shown below):

  {#FWTableContainer209091602}

  / * The div master to make sure that our contextual menus get properly aligned.  Be careful when you play with this one. */

  position: relative;

  margin: auto;

  Width: 800px;

  height: 600px;

  text-align: left;

  top: 20px;

  background-image: url(images/homepage_new3.jpg);

  border: medium solid #336600;

  position: relative;

  }

  Edit the css for FBlogo to as below:

  {#FBlogo}

  position: absolute;

  left: 700px;

  top: 380px;

  Width: 91px;

  z-index: 1;

  text-align: center;

  }

  Edit the css for bodytext as below:

  {.bodytext}

  do-family: Verdana, Arial, Helvetica, without serif.

  do-size: 11px;

  line-height: 13px;

  margin: 0;

  padding: 0;

  }

• When I open the picture library, then my pictures and scroll to a folder or an image, the view scrolls upward automatically

  I have a Dell Inspiron 580 running Windows 7 Home Premium 64-bit.

  When I open the picture library, then my images and made scroll to a folder or an image I want to view or work with, the animated icon is displayed and then scrolls upward automatically.  This also happens when I open a file; When I scroll down in a folder, I'm automatically referred to the top row of thumbnails.

  I tried to use two mouse different and convenience store says that mice work properly.

  Thanks in advance for your help.

  I suspect some kind of image synchronization software here at work. Disruptions could come from some refreshment paging that completes a cycle of enumeration of images in a folder.

  Image utilities 'helper' camera, printer or a third party may be the cause. A review of processes that start automatically when you start the computer would be the first step. While looking into MSCONFIG, startup can provide a preliminary list, the most complete list of programs or services that initiate at startup is AutoRuns from SysInternals.

  Autoruns for Windows

• IHAVE a header in a document in the header, I made a table to insert relevant information, that information is an image, but the table will not accept word 2007

  I have a header in a document in the header, I made a table to insert relevant information includes a picture, but the picture it does not accept word 2007

  Edit your message and change the WORD forum forum - you have posted in forum for Windows Desktop 7 and customization - nothing to do with WORD...

• Is Acrobat Pro just for us. We have an employee handbook that needs editing. A part is current pdf, some of an earlier version. You want to get all in a manual, the table of contents automatically adjust and links to specific pages of the table of content

  Is Acrobat Pro just for us. We have an employee handbook that needs editing. A part is current pdf, some of an earlier version. You want to get all in a manual, the table of contents automatically adjust and links to specific pages of the table of contents.

  Acrobat Pro is certainly not the right tool for editing. You want to change the manual using the source - MS Word files for example. Once you have the full changes including OCD work as you want, Acrobat Pro is the tool to convert the source document to PDF format, and ensure the accessibility requirements of 508 - and preferably ISO 14289 (PDF/UA) - are met.

• Why placeholders to insert automatically when you insert a Legend/shape? AND is displayed when an effect

  I have Captivate 6.0.1.240 and work on the film slides.  When I insert a text caption or a smart shape, a placeholder is inserted automatically with it.  How do I know that it is when I delete the shape, the placeholder of the rest.  Transition is set to none.  This isn't a problem until I have an effect. Example, a smart form with a zoom faded the 'placeholder' flashes just before the effect.  It's embarrassing!  No placeholders exist on my master slides.

  Another example: I used a smart form of arrow with the stretch of left effect.  The arrow flashes before the start of the effect.

  How can I turn off placeholders?  I just had this problem with Captivate 6.

  Although the project itself should work fine, but you get placeholder there then try this:

  Open your project, copy and paste it into a new blank project, as I mentioned earlier. Go to file > new project > empty project > open with the same dimensions as the original > copy the initial project > paste it on the new empty project.

  Please let me know the status after that.

  Thank you

  Vikas

• Is automatic and Table numbering in the Document to multiple sections

  I want to set up automatic figure and table numbering that includes a reference to the current section number. (Figure 2-1 = the first figure in article 2; Table 3-2 = the second table in Section 3). I understand how to do this with styles if I had to work with a collection of documents with defined chapters. How can I do this in a single document with a number of defined in section?

  Is the only way to define the styles in the list for my items?

  I'm afraid you're right. You can include the numbering of the chapters in style with the numbered list, but you cannot include section prefixes. I think that you will have to use the method you suggested.

• Save images in table

  Hi all

  I know this has been asked before, and I read a lot of solutions, so I added a bit of detail to clarify the question...

  LabVIEW 2013 SP1

  Vision Assistant 2013 SP1

  PCIe-1433 camera link Frame Grabber

  Camera link, 280 fps

  I had an application that read images from the PCIe-1433, using the buffer 1.

  I called IMAQ acquired copy VI buffer to copy the image in the buffer zone, and then I would put that image on the disk.

  That worked well, but access to the drive could slow down after a few seconds.

  So, with a little help from support NOR, I went to use the (example HE Ring) several buffers.

  Now I do not call the "IMAQ acquired copy buffer" VI, I call the VI "IMAQ extracted buffer" to get the images in the input buffer.

  But, since I am not copying the buffer to the 'image workspace"(IMAQ Create), I now only have a reference to the image.

  Is there an another VI, or otherwise, to get the actual image so that I can store?

  At the moment we are going to capture thousands of images for further processing, so I don't really want to create thousands of buffers at installation time to save all images (as other examples have illustrated).

  I hope it's clear.

  Any thoughts?

  Thank you

  Jeff

  Hi all

  I discussed this with Earl to Technical Support, OR it was very useful.

  Apparently, when I capture an image buffer, I get a reference to the location of buffer (I knew that).

  When I was passed the image to the VI 'Write a binary file', this tool was the reference to the image (copy the pixels of the image to the binary file).  (apparently not documented where I could find)

  However, when I replaced the VI "To write a binary file" with "Insert to matrix" VI, LabVIEW does not dereference the pointer and stores the reference.

  And, there seems to be no tool "Derefrence this pointer.

  So, what we come with...

  After the capture of the image of the buffer, am I on the 'Image' (pointer) VI "Image of copy to the table."

  It gives me a table 2D containing actual pixels of the image and NOT a reference.

  Can I save that image data in my table.

  After I capture all my images, the loop ends, I loop in the table, read the 2D array and pass it to the VI "Arry copy image" to retrieve the image.

  I then write the image in the binary file for custody.

  In doing so, other applications of utilitiy that already exist as follows in the binary file must be compatible with the file that is created.

  Thanks for all the ideas and thoughts.

  Jeff

• Why Auto-scale intensity images and how can I disable this?

  Dear Sirs I display an image from a FireWire camera (collected with "IMAQdx to Image.vi") in an indicator of picture (Vision-> Image display) on the front panel. When the distribution of intensity changes, the overall intensity seems to auto scale. But if change the intensity in a part of the image, and I put a cursor in another part of the image, the Image information box told me that the pixel value does not change even if the visible intensity of the indicator changes. I also made a comparison with the 'good old' graph of the intensity. So, I have to use 'IMAQdx get Image Data.vi' and place the data table before presenting the image in the graph of the intensity. If I disable AutoScale Z, a part of the image does not affect the rest, but if I turn it on, the image behaves like the display of the Image above. Obviously, there is a kind of automatic scaling in the display of images. Can someone tell me if and how I can disable this auto-scaling feature?

  Best regards

  / Leif Nyholm

  All pallets are applied to 8-bit grayscale images, the 16-bit image is converted to 8 bits before applying the palette.  You're right that it would be nice to be able to apply a rainbow palette to the original 16-bit image, but it is not available.  No doubt, you can write your own routine that would use a custom lookup table to convert the 16-bit image to an image of rainbow-colored, but probably would not bother.  The final image would most likely look exactly like the current image.

  Bruce

• How can you save only the image and not the whole page?

  We decided to use a tool to manage all media (mediastore), including Adobe illustrator files. Our mediastore display objects as thumbnails (small images) and is able to export in different formats, such as jpg images.

  The problem we have is we see the page through this mediastore, not only the image that we have learned with Amnesty International. So on the tile sometimes we see nothing because the image is small on the page (we see a small black spot on an empty table) and when we send the image (export), receivers had to crop the image to get only the photo...

  Y at - it HAVE any option to save in a format, but with photo only?

  We want to keep th HAVE format, because we want to be able to edit it with AI if we need to change.

  Example of tile:

  Is this too much problems to scale the work plan to adapt to the work? When you're in "Modify the work plan" double-click on a group given image automatically dimensionnera the current work plan to adapt to the work.

• I downloaded "image and flash blocker ' to get rid of AutoPlay video pop - ups, but now I can't play videos! Help!

  to stop the automatic boring-playback of videos on different sites (such as cnn.com), I tried the 'request to activate' setting on shockwave or flash and it happens again, so I was directed to the firefox site that had the IMAGE AND FLASHBLOCKER to install and now nothing plays! I tried on youtube, for example, and I can hear the sound, but there is no video. I can't find what I installed to uninstall! have no idea what to do now.

  maureens said

  . . . . a the IMAGE of FLASHBLOCKER AND install...

  Please confirm. Shows details of the system;

  Extensions

  Flashblock 1.5.18.1 - signed

• Where can I download the latest version which allows images and java script off?

  Because of my connection is often slow, I have the option to turn off "automatically download images" and Java script. 23 Firefox doesn't have these options. Where can I download version 22 or whatever the latest version is that these permitted options?

  Thank you

  There is also settingsanity

  • https://addons.Mozilla.org/en-us/Firefox/addon/settingsanity/

• Restoration of images and icons? None are displayed on web pages.

  I used to have pictures and icons, but now none are not displayed, just text. I deleted Firefox and downloaded but the error persists so I have to have an incorrect setting.

  Is he missing pictures then make sure you are not block images from certain domains.

  • Check the permissions for the domain in the active tab in "tools > Page Info > Permissions.
  • Check that the images are enabled: Tools > Options > content: [X] loading images automatically
  • Check exceptions in "tools > Options > content: Load Images > Exceptions.
  • See the tab "tools > Page Info > media ' for blocked images (scroll all the images with the cursor key).

  If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.

  Make sure that you do not block the images of third parties, the pref permissions.default.image must be 1.

  There are also extensions like Adblock Plus (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block the images and other content.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • http://KB.mozillazine.org/Images_or_animations_do_not_load