15 - ba045ur: problems with BCM43142 Win7 64

Similar Questions

• Problem with drivers (win7 on a 15-j169eo)

  So, I finally got my new 15-j169eo and an Intel SSD that I installed after watching the guide. Booted up and installed a fresh install of WIn7, but here my problems start.

  Downloaded all the drivers of HP and get an error message after each of them except network Realtek driver. After being able to connect to internet I could quickly gather most of the necessary updates, but I always miss the sound HD, USB 3.0 and the card reader driver.

  The chipset is Intel HM87 Express and their driver did not help me any where. These drivers only for WIn8 (wich I hate in its current state) or I would be able to install?

  I tried the Assistant de Support HP r but either that or WInUpdate is able to get to install them.

  What should I try next?

  Hello:

  You should try all the drivers and the software of the 15 t-j100 except graphics driver nvidia.

  DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=6521374

  When you install the graphics, you need to install the first reboot of Intel HD graphics driver and then install the graphics driver nVidia.

  Link to the graphic driver nVidia is below...

  http://www.nvidia.com/download/driverResults.aspx/75992/en-us

• problems with his Win7 in some games

  I recently installed windows 7 32 bit and several games in my collection to test his game performance.
  WoW - no
  issues of SoC - n ° Stalker
  BioShock-minor sound glitches
  Crysis - serious sound problems

  I have updated audio drivers, windows and games without result.
  I tried turning the max possible in the lowest possible sound quality and have tried different sets of speakers.
  its integrated usb 2 different cards have been tested with the same questions.
  Ran two games in each mode of compatibility from xp to vista and as an administrator.
  I changed the parameters of gfx max min without changing the sound problems.

  After all this I did no progress whatsoever in fixing this issue. I know that Bioshock is not yet listed as compatible, but Crysis is.

  I can't think of anything else to try at this time but would like to than any thought that you guys have...

  Did you do an upgrade of Vista?  You need to maybe uninstall and reinstall your games.  Sound cards are often based on the bus in your hardware drivers, so you can, of course, that you have the drivers and the latest drivers of motherboard for your machine and not only your audio drivers.  Even in this case, not all audio drivers are written in the same, and the problems that they have not yet updated (but can be aware of).  I would try the drivers first and then look for patches for games so that contact your sound card manufacturer to see if they are aware of the problem or know a work-around.

  K

• Satellite A300D - problem with installing Win7

  Hello
  A few days ago, my HARD drive was broken down. I bought a new one and tried to install Win7 Ultimate x 64 (7600) on it. But I had a hard time:
  -L'installation interrupts on the stage of "Complete installation" and the laptop turns off when the second restart proceed, before the stage when it is necessary to fill in some fields, for example the name of the computer, etc.
  So a question arises: what happened and what is required for a successful installation?

  Satellite A300D is the old model of laptop, and you can order is original Vista recovery DVD only.
  I installed Win7 32 bit on A300/A300D successfully and think that 64-bit installation should not make trouble.

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• Portege R700 - problem with fingerprints to connect on Win7

  I have problems with my new Portege R700 with fingerprint reader to log on Win 7 acount.

  I have digital fingerprints installation to the system via the Toshiba fingerprint utility. Several times I can wake up the Portege of sleep or turn it on, fingerprints from the BIOS is accepted, after which appears logon screen in Win7 and in some cases, I'm able to connect automatically to this account. In some cases just system is pending, it is not possible to login with the password. I restart phone, sometimes more than once.

  You can help someone? I have already several times removed, Setup still traces of fingers, I updated the utility and the new driver fingerprint - nothing does not.

  Hello Vava

  Are you using the original recovery image Toshiba (operating system) that you got with your laptop?

• 15 K1Y78EA #ABZ ENVI: problem with my wifi Broadcom BCM43142 802.11 Wi - Fi adapter on windows 10 bgn

  Hello
  
  I have a problem with my Broadcom BCM43142 802.11 bgn adapter Wi - Fi because I upgraded my windows 8 to 10

  wifi works fine but then after a while a get on the wifi icon's yellow warning triangle, no internet, reviews
  I have to disable and then enable the adapter to operate again, the same problem, but after a while again accurs

  card driver is updated to the latest version 7.35.275.2, the driver date 02/07/2015 via the HP support assistant

  It says no new updates

  Help, please
  
  Thank you

  Hi @HadjadjTaha,

  Thank you for your inquiry.

  I understand that since the upgrade of Windows 8 for Windows 10 your Wi - Fi works fine, but after awhile the icon won't say no Internet and you will need to disable and re-enable the adapter to regain access to the Internet.

  Would check you this setting.

  • Go to the Device Manager
  • Click the network card to expand the list
  • Right-click on the adapter that is listed and choose Properties
  • Click the power management tab
  • If "allow the computer to turn off this device to save power" is ticked, please remove it.
  • Click OK
  • Repeat the process above listed all types of adapters.

  Here is a link to PC HP - troubleshooting wireless network and Internet (10 windows) that can also help.

  Please let me know the results.

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as yourself. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts, please click on the Thumbs Up icon below.

  Good luck!

• DC5800 WIN7 x 64 and problem with restart

  Hello

  I have the problem with DC5800.

  I do the new install of win7 ultimate x 64.

  Now when I try to reboot (restart, not stop), the system is down, check the bios and... black screen.

  System won't start.

  When I shut down the system and start now - everything is ok.

  The system is normal startup.

  I upgraded the bios (from 1.04 to 1.55), all the system updates, read internet half and I have no idea.

  Can someone help me?

  Regards Robert

  Hi Paul

  Thank you for your help.

  Problem is solved.

  I was download and install EasyBCD.

  Then I BCD deployment-> install Win7 MBR bootloader-> write MBR

  After computer restart to see the problem with start, but after repair (from DVD instalation) everything works ok.

  Regards Robert

• Photoshop has encountered a problem with the display driver cs6 - win7 64 bit

  Hello

  I installed collection CS6 Mater, whan I tried to enter in photoshop I got this window «photoshop has encountered a problem with the display and temporarily disabled driver development using graphics hardware...» »

  Whan I get is window, the "parameters of the graphics processor is gray - «photoshop detected a problem in your display driver...»» »

  I have laptop with AMD Radeon R7 M260

  Win7 64 bit

  PC Toshiba laptop satelite l50 - b

  Hi doriv,

  • Update your graphics card driver.
  • You have the graphical configuration Swichable?
  • As Mylenium says you must add this parameter in graphic control panel so that Photoshop can detect your card.
  • Open graphic switchable Configuration and add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop Cs6). See graphics switchable troubleshooting questions unde... | Community

  

  Kind regards

  Assani

• Problems with wifi: Broadcom BCM43142 802.11 bgn adapter WiFi in Windows 10 Pro

  Hi, I have some problems with my laptop wifi card. Product of my cell phone number is: L8R39AV.

  Therefore my main problem in my laptop that my wifi card is a bit faulty. Defective in this sense, it is slow compared to the connection with the wired ethernet connection. To better understand you, I also did a speed test with the wired connection and the connection of the wires.

  The results are:

  1. Wired ethernet: download 25 + speed, download speed 3 +.
  2. WiFi wireless: download 15 speed, download speed of 2.

  I could use the ethernet, but my room is very far from the internet connection...

  Need help please!

  Thank you

  Pavan

  Hello:

  Have you tried the latest Broadcom wireless lan driver for your laptop?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  File name: sp75249.exe

• External monitor display problems with Dynadock U10 on PC Toshiba laptop Win7

  I just started with my current compnay and they allocated me a new from Toshiba Satallite laptop running with Windows 7 64 - bit operating System.

  They hooked me up a Station of reception Dynadock U10, separate keyboard and a mouse and a monitor external 22 ".
  I experienced a problem of compatibility with some software, but I currently have a major problem with slow internet pages freezing or general display issue when the VGA is connected to the docking station.

  The laptop works fine when the VGA is connected directly to the laptop. I have download the recent software/driver upgrade loaded 18 (TC30322400A) without fixing the problem.

  I also loaded the upgrade diplaylink 5.6.31548.exe, as mentioned in other forums, once again, without success.

  Any help would be appreciated.

  Alex

  Are you using the latest driver?
  In my opinion you should not update BIOS.

• sqldeveloper 4.1 UI refresh problem with win7

  Hello

  I have a problem with user interface with windows 7 64 bit sqldeveloper. I downloaded the latest version (4.1.0.19.07), I have improved my jdk (1.8.0_45). my video driver is the latest version. Whenever I run sqldeveloper and try clicking on a menu, nothing happens and if I move the mouse menu somethimes drop-down is displayed one by one.

  Also, I tried everything I found like adding this parameter to sqldeveloper.conf. "AddVMOption - Dsun.java2d.noddraw = true".

  I have a problem with my work and personal laptop.actually, this is not new for me, is the latest version, I use sqldeveloper: 4.0.0.13.

  What should I do?

  Thank you.

  Hello again,

  I guess I think, I compare 4.0.0.13 and the latest versions of conf files and find in older version of the file there is a line "AddVMOption - XX: MaxPermSize = 256 M" when I added this to the latest version, it worked.

  I forgot, I also remove these lines:

  AddVMOption - Dsun.locale.formatasdefault = true

  AddVMOption - Dorg.netbeans.CLIHandler.server = false

• Problem with iTunes on Windows 10 12.4.1-

  Recently upgraded iTunes to version 12.4.1 and now my older iPod (a classic and a Nano) will not be synchronized.  New devices (iPhone, iPod Touch etc.) seem to be good, but older devices show as 'corrupt' attempts to restore the iPod do not seem to work, and now music has been deleted during the restore process, in my opinion, it is a problem with the new update running on Windows 10.  I installed iTunes 12.4.1 on a Win7 machine and two older iPods have been recognized and synchronized well - isn't the device - still on the machine Win10 it still shows up as damaged files no matter how many resets / reboots etc I do... someone else has this problem?  Yet all the patches?

  Yes - same thing here. Windows 10 and my iPod Nano 4th generation syncs not - says it is corrupted. When I plugged on my Macbook, it was fine. Maybe we can install old version of iTunes?

• Problem with catalyst 12.8 working set memory?

  I run a system Win7 Ultimate x 64 with dual ATI HD5870s inside. After update Catalyst 12.8 today, I noticed a problem with the memory what work has been used by Firefox 14.0.1.

  IS REPRO STEPS
  (1) run Firefox
  (2) open Taskman, sort of working set
  3) http://www.kotaku.com
  (4) use mousewheel to scroll the pane to the right down - load the additional articles for review.

  If you scroll down a bit, you should see Firefox eat a few GB of working set memory in short order. The page starts answers incorrectly at the time and Firefox becomes unstable.

  Note: This problem only repros when Crossfire is enabled. Crossfire is off, there is no problem at all.

  I don't know if it's a v Crossfire Firefox thing, or something new, sent by 12.8 catalyst... but whatever it is, keep your eyes open. I don't have a way to solve this problem yet apart from the stop of Crossfire, which denies the reason why I went with a double solution map in the first place.

  Deactivation of Firefox > Options > advanced > General > browsing > use hardware acceleration when available solves the problem until Mozilla and AMD solve this problem

• Problem with Toshiba E.Steel HD 500GB USB 3.0

  Hello guys, yesterday I bought a Toshiba HD 500 GB USB 3.0 e.Steel but I have a problem, if I connect the HARD drive to the USB 2.0 to my laptop hard drive works perfectly, but if I connect to the laptop on the USB 3.0 detects the hard drive (sometimes) and it only works for a few minutes , but if I copy files from drive is disconnected almost immediately... you think it's a problem with the HARD drive or the laptop?

  I have a laptop qosmio x 770 with a one month old
  USB 3.0 port works perfectly with any other USB 2.0 device
  I have the latest driver
  I have windows 7 64 bit

  > I have the latest driver
  > I have windows 7 64 bit
  The latest driver do you mean exactly?
  Are you using the original preinstalled Win7 you have with your laptop (factory settings)?