images moved to the map

Similar Questions

• How can you save the image to a google map that is contained in a Web site?

  How can you save the image to a google map that is contained in a Web site? I use a macbook at the beginning of 2011 pro and functional on OS X Yosemite 10.10.5. I would like to capture the image of the map and print it with a good quality.

  Take a screenshot and print that

  Google mapsHow to take a screenshot on your Mac - Apple Support

• When I try to delete an element of images/documents, etc, it is moved to the Recycle Bin ok but the little window recycling rest and cannot be canceled

  original title: Please help me.

  When I try to delete an element of images/documents, etc, it is moved to the Recycle Bin ok but the little window recycling rest and cannot be cancelled by the task handle. If I open 'my computer' and start typing in the search box it also freezes and it slows down my computer. I ran spybot, AVG, disk etc. defragmentation, but no problems were discovered.

  Have you tried running SFC. EXE/scannow from a high command prompt to repair a corrupt Windows?

• Can't move the film to the map image

  I'm on Windows 10 (with the graphics processor is disabled in the lightroom preferences) using Lightroom CC. When you select images from the film, they will not drag on the location of the card in the card module. I'm very well online and google maps works, it's as soon as I select the image, it will not drag and drop. I checked for other preferences, I might need, but it seems like it should be a no-brainer. Suggestions as to what I am doing wrong so I can get this feature? Thank you.

  Be sure to drag from within the image and not the border.

• Design of images of the map

  are there good ground rules in the design of your card images?

  How do determine you the "live space" for the image of your card?  to make your design not get trimmed or cut?

  At that time, DPS 2015 does the following:

  -The aspect ratio card format and image (for the top, left and right image) determine the shape and size of the image under the influence of size of card (column & row) and the proportions of the provision.

  -L'image of the map (for articles, banners and collections) is adjusted to fill the area of the image of the map, then centered and cropped.

  General orientation is to use a large images for all images in the card so that you get a good result for the large maps as well as small cards.

  But the main focus at this point is to be very aware of what is at the center of the image. "Artsy" rule of third-party images will not survive.

  There is an interaction between these factors and you have to play with the design of card to make your work plan. Make graphics for a wide and short card image fill the maximum space of a map may take some fiddling with serious at first. Look at the scale to fill the result very carefully.

  N.B. - the brand image is treated differently.

  Brand image is adjusted to adapt, instead of the scale to fill. We do not crop the image of brand.

  HTH

• Several images can be viewed at once, each in it so how can you images floating in the workspace has a window, which can be moved on

  How can you images floating in the workspace, so several images can be viewed at once, each in its own window, allowing the images to be moved. This function doesn't seem to work in items 12

  Go in Edition > Preferences > General. Check ": allow Documents floating in its entirety in Edit Mode."

  I hope that will allow you to view the 3 files simultaneously via the available option.

• How to display images in the Lightbox popup window or click the link to the map image Dreamweaver?

  I've built several image maps on a base image I want to use to display different pictures. I used successfully of Lightbox to display individual text pictures or thumbnails, but don't know how to make this work of image maps in Dreamweaver 8 and cannot even change the Dreamweaver onmouseover command coded so that it works from an action to click instead of a passage from the mouse that ridiculously open a popup window each time it is a passage of the mouse the map image.

  OnMouseClick nor onclickonly allow me to change the action that I would really rather have open in the viewer anyway.

  Here's what Dreamweaver is scripted for me (with a few small jacking to run):

  < area onclick = "CSAction (new Array(/*CMP*/'sp01')); "return CSClickReturn()' shape ="circle"coords ="552,439,9"href =" # "rel ="lightbox [kitchen]"title =" "alt =" "onclick =" MM_openBrWindow (' I / 01.jpg ', ", 'resizable = yes, width = 667, height = 505') ' csclick ="sp01"/ >"

  And here's what I usually script Lightbox text or thumbnail image link, but do not know how combine this with Dreamweaver image map code to make it work:

  "< a href ="... /... /.. "/ I/image.jpg" rel = "lightbox [kitchen]" title = "Title" > link text (or tile) < /a >

  I have problems with file is available online at:

  http://lifegivingspring.info/LGs/about/study/siteplan/

  I can see your problems, so I changed the image with your arrows and put some fotos below them in the lightbox you want:

  The upperone with the visibly frames (frames set to '1') of the worksheet, the other is completely identical, I only put managers to '0 '.

  OK dstx, please take a look once more here: http://www.goldschmiede-blumberg.de/PartnerringeAm.php.

  Hans G.

  HCH

• Save the map as image and print it

  Hello everyone,
  
  I have a few problems with the registration card to the image format and printing also. I use mapview.getMapAsXML ("GIF_URL") to get the XML query but I don't really know how to send this request to OMServer and get the answer in image!
  
  On printing the map. I'm following example Oracle to the printed card ("http://starbucks.infotech.com.tr/mapviewer/fsmc/tutorial/samples/mapPrint.html"), but get this error: "application of string is too long for no AJAX of Oracle remote access cards.»
  
  Could you please help with card, save and print?
  
  Thank you in advance.

  You can use mapview.getMapImageURL. It will give you the URL of the result map image, that you can embed in a web page for display or printing.

  "Query string is too long for no AJAX remoting. Oracle cards', you can read this thread, ask the string is too long for the Oracle Maps AJAX non-remote access

• Card problem OBIEE - points on the map illustrated with two different images.

  VI have obiee 11.1.1.7.1 where we have an analysis with a card.

  The base map and the theme is created in 11.1.1.7.3 mapbuilder.

  VI have a variable shape layer in the OBIEE plan. The shape is a circle, and has four different locations (using four different colors to show the differences).

  A query can show 20-30 positions on the map.

  So far so good.

  When we run the analysis, the following occurs:

  1. circles of 20-30 (with one of four different colors) are presented correctly on the map. These results appear directly on the map once we click on "Apply"

  2 an hourglass appears and we will have to wait for 20 to 60 seconds.

  3 then an "x" appears in each of the 20-30 circles and the hourglass disappears. The 'x' is the mapbuilder theme that we created if we do not have any Style 'Render' associated with the Style. If we have a rendering style, for example a simple small point, this point then appears with the circle.

  Our question is how we can force mapbuilder for not making the 'x' in the map. That's where we get terrible response time.

  
  

  Best regards

  Joel
  

  We have solved the problem using only the datawharehouse data to generate BI data layers.

  We have created a new BI data layers using variable forms. Then, we chose a layer of bridge custom rather than use the MapBuilder theme that we created earlier. Then, we used the points Long/Lat for the generation x and y.

• My google map stopped working: I have firefox 12.0 and my google map shows just a white square instead of the map.

  My Google map does not load. It displays an empty blue square instead of the map. I disabled all extensions of pluginsand started in safe mode, cleared cache and cookies, but nothing is done. WOT to do!
  It works in Chrome, but also have the same problem with IE9. I don't know when it started, but it was working fine last month.

  Looks like a problem with the width of the containers that have the width set to 100% 0

  These style rules make the images appear for me:

  @-moz-document domain(www.ctiscarborough.org.uk){
  div.view-content > div > div > div,
  div.view-content > div > div > div > div,
  div.view-content > div > div > div > div > div {width:100%}
  }
  

• Can I use a jpeg image to define the texture on an object in scene I created from a stl file?

  I want to create an object in a 3D scene, whose shape is defined in an stl file. Then, I want to put a picture of a jpeg on the surface of the image by using the texture property. If I create the object by using, for example, the Box.vi creation, instead of the stl file, I can apply the jpeg format. But as soon as I create the object of the stl file, the jpeg format can be applied. Any ideas or is it just not possible?

  Example VI, stl and jpeg attachments.

  By default, the texture of the stl is disabled. You can activate the texture by using this property.

  

  Now, you must also set horizontal and vertical mode for the decal to apply packaging. Below, I repeated and linear and spherical. It applies to the texture, but there is work to map to the polygons.

  

• Icons cannot be moved on the desktop

  I just changed my desktop image.  I noticed the trash moved to the side left (he was on the right side at the start) in line with my other icons.  When I try to drag the icon to the trash to another area on the desktop, it jumps to the left side.  What I've done wrong?

  It seems that "Auto arrange" has set in motion.

  Right-click on an empty space on your desktop, then:

  Organize the icons in-> uncheck "auto arrange".

  "Icons disappear or that you cannot move icons on the desktop".

  <>http://support.Microsoft.com/kb/137069 >

  HTH,

  JW

• Error - location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image cannot access the desktop icon to burn a DVD.

  Original title: I can't access my desktop icon to burn a dvd.

  I can't access my desktop icon to burn a dvd.  The message I get is as follows, "location: C:\Program Files\Common Program Files Central\Main\msvcr71.dll is not a valid windows image."  Please check this against your installation diskette. "On my toolbar, it said,"mediahub.exe - bad image"can someone please help me as I've used in the past to burn CDs and DVDs.  He moved with the computer.  Thank you

  Hello

  1. have you done any hardware changes or software on your computer before this problem?

  2 do you have a copy of Sonic application backup to reinstall it later?

  I suggest you to uninstall Sonic since Add / Remove Programs. Subsequently, check if you are able to burn CDs in your computer.

  
  Reference: burn your own custom CDs

  Hope the helps of information.

• My screen has moved to the right. Unable to scroll to the top and bottom of the margin on the right side bar. What should I do?

  My screen has moved to the right. The scroll bar on the right side is more visible to use. What should I do?

  Hi roseann.loasby,

  As the display is shifted to the right the problem is more to do with your monitor than Windows. A monitor, it of like a TV and invokes hold vertical and horizontal button options to keep the image in place.

  There should be options on your monitor to make changes to the positioning vertical/hortizonal (in your horizontal case). Most monitors have an 'auto' option that automatically adjusts the diaply photo, so it is well positioned. It's nothing serious, however, you will need to check your user guide for the monitor to see what options you have to use the re - adjust the horizontal positioning. If there is a "menu" button on the front of your monitor try to press to view a display on your monitor. You can then either use the option 'auto' or else click the left/right arrows (usually on each side of the on-screen menu button) to adjust the menu and then the position.

  If you are not confident to do this, you ask someone with more knowledge to do it for you. By pressing the wrong button, you can make the screen more out of alignment, so be careful, as otherwise it will be a matter of trial and error until you have reset the monitor correctly.

  It is a fairly simple job to do, but because every monitor is different, it is difficult to write clear instructions because I could tell you to press a button and this button may not be here, then take a look at your user guide for the monitor first to familiarize yourself with the buttons are available.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• The map SD DCIM folder converted file.

  Recently, I tried to move the images from my SD card using my card reader.  Vista displays an error message indicating that he had fixed the errors and I could now open the map.  When I opened my card, the DCIM folder had been converted into a file and so now I can't open the images on the card.  Is it possible to convert the DCIM file to a folder so that I can open it and view my photos?

  Nothing has worked for me, I could even see hidden files. However, all cameras have an internal memory and the ability to copy valuable pictures, a little at a time. After having this deletion map of the device, connect the device to the computer via a usb cable and voila, the DCIM folder is displayed with the copied in photos to access. His laborious but it works! Lynne