ImageSnapShot and dynamic component

Similar Questions

• Delete a dynamic component created with QML?

  Hello

  How can I keep the reference to the created object, for example to remove it later.

  In the example below the reference "createdControl" is stored in a local variable of Manager 'onClicked' and is not accessible afterwards.

  It is not possible to use a property of the container to store, because then I need to specify a data type (curiously its possible to store it in a javascript imported the file into a variable typless...).

  Therefore this reference seems to be pretty useless at the moment, or did I miss something?

  Thank you.

  Container {
      id: rootContainer
      Label  {
          text: "Example Component Definition"
      }
      Button  {
          text: "Click to create dynamic component"
          onClicked :  {
              // Create the component and add it to the Container
              var createdControl = compDef.createObject();
              rootContainer.add(createdControl);
          }
      }
      attachedObjects: [
          ComponentDefinition {
              id: compDef
              source: "test.qml"
          }
      ]
  }
  

  OK, the right kind of data is 'variant', sorry, I searched for an hour, just found

• Difference between static and dynamic encryption card

  Anyone tell me the difference between static and dynamic encryption card?

  Hi Rodrigo,

  Public static crypto map - identifies by the peers and traffic to encrypt explicitly. Generally used to host some tunnels with different profiles and characteristics (different partners, sites, location)

  So, when you have the information of the two peers than what policies we're going to use, what is the IP on both devices we normally use static VPN.

  Crypto dynamic map - is one of the ways to accommodate peer sharing the same characteristics (for example, several offices of branches share the same configuration) or peers with dynamic IP addressing (DHCP, etc.)

  For more information, please visit:

  https://supportforums.Cisco.com/document/12013476/crypto-map-based-IPSec...

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Ice, liquid and dynamic data (modules and applications) - just a suggestion

  Hello!

  It is a position of more suggestion rather than a discussion message. I'm not sure that having placed in the right area, so excuse me if I don't.

  1. I was very happy to work with liquid to display things when a user is logged on and stuff so that it was not. Until I realized that my site in full could not be editable through the ice, because I used all liquid through the site. Liquid is amazing, but it would be more surprising if it can work with ICE. Is this something BC have in mind for future versions?

  2. it would be so great that ICE would allow my clients to edit blog, products, applications, and data FAQ. I think you must have a glance, that Webflow people do with their CMS. Their CMS allows people to change static and dynamic content with an interface similar to ice BC plans to implement a similar feature in the future?

  Thanks for reading this,

  Diego.

  While BC is working better and more recent versions of ice and I'm sure will better work with the new features of British Colombia as a liquid, due to the nature of the liquid and the coding side Server with conditional statements and complex solutions, you can create - with ice you can pretty well bet that he used to be able to support what your specifically ask in all cases. Keep this in mind.

  With more capacity edit on other things - I am course will be in future versions.

• Difference between dynamic and dynamic routing issue

  Hello
  
  Can someone let me know the difference between dynamic routing and dynamic publishing in the oracle service bus
  
  Thank you
  Barro

  Hello

  If the outgoing end point is not static or Exchange with the incoming request again for dynamic actions...

  Routing is used for calls for installation (who have asked and answer) that is routing action awaits the response before going to the pipeline of response
  Publish is used for asynchronous calls (which does not hv any answer).

  See you soon,.
  Afonso Gupta

• static and dynamic reports

  Hello
  
  I'm new to HFR. Can someone tell me what is static and dynamic statement and when we go to static and when we go for dynamic with scenarios in real time?
  
  Thanks in advance

  Static report is usually fixed, so that the reports do not change when the time and hierarchies are updated. For example, a static report can be useful for regulatory deposits etc. You do not want to change statutory reports according to the when they were run ;-)

  Dynamic reports has several levels:

  -Dynamics updated due to changes in current month/quarter/year;

  -Dynamic reports that automatically updated based on changes made to the hierarchy: contour moves, new members, etc.

  In an ideal world, you have to build relationships are dynamic as possible, that you do not have what to have to change them every month, quarter, year, based on the changes of the period.
  Or do you need to update when managers change their minds about what needs to be told (less maintenance and future audit)

  Building reports are dynamic as possible has some limitations, however, in this by establishing the report, it would be not as fast to run (you may have several rows/columns more) to make the reports 'dynamic '.

  HOEP this helps, Iain

• Cannot simultaneously use vector art and dynamic forms?

  I was responsible for creating an online order form, and it seems that beign able to use vector graphics is the key to the design of the form. Dynamic form elements are also absolutely necessary - all the information has to fit on one page (and fortunately, most are mutually exclusive, allowing only the fields necessary to appear).

  Unfortunately, when I do a page of the form layout in Illustrator and import it into LiveCycle, I seem to be unable to use the drawing tools (specifically, lines and text, that both I need). I tried to save the file in a dynamic form, but only the opportunity to save it as a static form is displayed.

  Y at - it something I am doing wrong, or I'm going to have to choose between the use of vector graphics and dynamic form options?

  Fix. You can import the static PDF file work and then add the form objects.

  Steve

• Difference between the static SQL query and dynamic SQL query.

  Hello
  
  Please explain the fundamental difference between static and dynamic sql queries. Please explain for example.

  Static: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/static.htm
  Dynamics: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/dynamic.htm

• Taskflow and dynamic region

  Hi all
  
  I use taskflow and dynamic region.
  
  When the user click on one of the links on the home page. My taskflow will change at different taskflow and do the operation.
  
  lets say when user click on the same link on home page, I want to refresh the taskflow and I want to start do default activity operation.
  
  now my problem is when the user clicks a different home page link, it go to different taskflow and operating activity by default.
  
  but when the user clicks on the same link, it won't make the operation of the default activity.
  
  I think it means that it is not refresh taskflow.
  
  is it possible to refresh the taskflow programmatically?
  
  with respect,
  WP

  Link your dynamic region to your managed bean and

  In the link that you change the region to:

  dynamicRegion.refresh (FacesContext.getCurrentInstance ());

• Dynamic component and layoutProperties for DispositionAbsolue

  In my QML app, I have a 'Tile.qml' where I defined a custom component.

  It works fine when I create explicitly (as shown in the example below), but I'll have 24 tiles that I don't want to create manually.

  // This is main.qml
  
  NavigationPane {
      id: app
      property int tiles: 16
      property int tileSize: 192
      property int rows: 4
      property int columns: 6
  
      firstPage: Page {
          id: pgMain
          content: Container {
              id: root
              layout: AbsoluteLayout    {  }
  
              // Tile 1;  uses "Tile.qml" declaratively
              Tile {
                  text: "1"; tile_x: 0; tile_y: 0
                  layoutProperties: AbsoluteLayoutProperties {
                      positionX: 0
                      positionY: 0
                  }
              }...
  

  I added the following to main.qml to take into account the components of creating dynamic NFB tile:

          attachedObjects: [
                  ComponentDefinition {
                      id: component_Tile
                      source: "Tile.qml"
                  }
          ]
  
          onCreationCompleted: {
  
              var newTile = component_Tile.createObject(  );
              newTile.text = "7"
              newTile.tile_x = 0
              newTile.tile_y = 0
  
              root.add( newTile );
  
          }
  

  I works great for adding a tile, but here's my problem: in the "declarative" version, I defined the absolute location of the tile in the container by adding the following to the object of the tile "layoutProperties: AbsoluteLayoutProperties {positionX: 0 positionY: 0}.

  Now, I don't know how to do it (specifiyng the obtions of page layout to place the component in absolute positions in its container) during the creation of the conponent dynamically!

  Is there a way? Am I missing something?

  Your help is greately appreciated!

  -jlb

  I made some experiences and this code seems to work, even without the alias:

  hand. QML

  // Navigation pane project template
  import bb.cascades 1.0
  
  Page {
      Container {
          id: root
          layout: AbsoluteLayout { }
      }
  
      onCreationCompleted: {
          for (var i = 0; i < 4; ++i)
          {
              var newTile = component_Tile.createObject(  );
              newTile.text = "TEST" + i;
              newTile.layoutProperties.positionX = i * 150;
              root.add(newTile);
          }
      }
  
      attachedObjects: [
          ComponentDefinition {
              id: component_Tile
              source: "Tile.qml"
          }
      ]
  }
  

  Tile.QML

  import bb.cascades 1.0
  
  Label {
      id: label
      text: qsTr("Label")
      layoutProperties: AbsoluteLayoutProperties { }
  }
  

  UPD:

  Discovered another interesting thing...

  If you don't want to force the tile to have DispositionAbsolue, so what follows will also work:

  hand. QML:

  newTile.layoutProperties = Qt.createQmlObject('import bb.cascades 1.0;AbsoluteLayoutProperties{}', newTile, 'main.qml');
  newTile.layoutProperties.positionX = i * 150;
  

  This line may be withdrawn from Tile.qml:

      layoutProperties: AbsoluteLayoutProperties { }
  

  UPD 2:

  Found an even easier way:

  attachedObjects: [  ...,  ComponentDefinition {
      id: absoluteLayoutPropertiesFactory
      content: AbsoluteLayoutProperties {}
    }]
  ...
  newTile.layoutProperties = absoluteLayoutPropertiesFactory.createObject(newTile, {});
  newTile.layoutProperties.positionX = i * 150;
  

  UPDATE 3:

  Just to be complete, the components of Qt Quick work too.

  import QtQuick 1.0
  ...
  attachedObjects: [  ...,
    Component {
      id: absoluteLayoutPropertiesFactory
      AbsoluteLayoutProperties {}
    }
  ]
  ...
  newTile.layoutProperties = absoluteLayoutPropertiesFactory.createObject(newTile, {});
  newTile.layoutProperties.positionX = i * 150;
  

• get the id and remove dynamically component

  Hi I just add components dynamically, now I want to remove the components, there is a way to do it by programming?

  or just to get the id of the item (action event of a get (actionlistener) this button id button)

  I found the solution

  {} public void delete (ActionEvent actionEvent)

  UIComponent uipanel = panelFormLay (UIComponent);

  UIComponent padre is actionEvent.getComponent () .getParent ();.

  uipanel.getChildren () (padre) .remove;

  AdfFacesContext.getCurrentInstance () .addPartialTarget (uipanel);

  }

• Selector of colors and dynamic text fields

  Hello
  
  Good so I have two problems here, and I don't know how to solve one of them!
  
  Problem 1.
  Change the font of a dynamic text field. I know how to do this with the properties of text etc format using action script, but I don't know how if you create a text field in the action script.
  
  I need to change the font of the text in a dynamic text field that is created and remains on the scene. I have a clip, and inside that movie clip is the text field, with all the content properly shaped. If I had to add the text field using action script I loose all the formatting. So is that nothing at all that I can change the text field properties by using script of action of a dynamic text field created on the stage?
  
  Problem 2.
  The color picker component! I want to use the color selector component to change the color of the text in the above dynamic text box. No doubt, I have the same problem as above, but this side, I can't work out how to draw the color from the color picker value when the user selects. I tried to use the ColorPickerEvent ColorPickerEvent.CHANGE knowledge... and so on. However, I am coding on the frame instead of an external action script file. and when I export the movie, the following error message appears: 1046: Type was not found or is not a constant of compilation: ColorPickerEvent.
  
  Someone at - it ideas how can I remedy this?
  
  Your help will be greatly appreciated, it is part of my studies and have been fighting for a time: S
  
  Many thanks for you help in advance
  
  Jude :D

  I don't know if I understand the problem of text format that you are experiencing. Looks like you want to have text that is already formatted to change to another format.

  If this is the case, simply set the new text format whenever the time comes to do so.

  If you have...

  var format1:TextFormat = new TextFormat();
  Format1.font = "arial";
  Format1. Size = 14;

  var format2:TextFormat = new TextFormat();
  format2.font = "papyrus."
  format2.size = 28;

  Then you can switch between the two formats according to the needs...

  tField.setTextFormat (format1);

  tField.setTextFormat (format2);

  as long as these formats are in the scope of their guest.

• First try the producer consumer Architecture: continuous play and dynamically update settings.

  Hello

  I am currently working with two instruments; an Agilent E3646A and a NI 6212 BNC. My goal is to have the 6212 continuously take measures according to predefined parameters while the E3646A parameters can be continuously updated. This combination simple instrument aims to help me learn the manual architecture; continuous measurement, output dynamic controls and instruments more will be added in the future.

  I've already posted on a similar, but more complicated configuration (http://forums.ni.com/t5/Instrument-Control-GPIB-Serial/Split-second-lag-when-controlling-two-instrum... and was advised to try the producer consumer Architecture.) I found the documentation on the website (http://www.ni.com/white-paper/3023/en/, https://decibel.ni.com/content/docs/DOC-2431), searched the forums and built my own VI. While my first attempt at a producer consumer Architecture has solved some of the problems I had when I posted on the subject, however, new questions have been raised regarding the reading and adoption of the VI.

  I am currently able to run the VI and update the settings on the device. Previously, I'd get a freeze while the instrument has been updated and could not switch settings until it was done. This has been resolved, although that reading updates only when a parameter has been updated, although it is outside the structure of the event. In addition, the Stop button does not in any context. I also got occasional mistakes on the part of Deqeue, but the major part of the sentence is error-200279 'A tried to read samples that are no longer available' to DAQmx Read. I realize that there is a problem in my loop of producer but have not been able to find a way to solve it.

  This is my first attempt at a producer consumer Architecture and already I can see that it is a powerful tool. I read as much as I could and looked at examples, but should have some problems at the beginning. Would be very grateful of any advice so I can take full advantage of the architecture.

  Hope to hear from you,

  Yusif Nurizade

  You're going to overflow this buffer, unless the events are generated faster than "sample rate/number of samples.   Period.  Nothing could be simpler.

  You don't need a local to stop your curls.

  Try something like this attachment.  I simply moved the structure of the event in its own loop dedicated since it had nothing to do with acquiring data at all.

  Data acquisition loop stops very well when you destroy the task and destrying the stops of power queue (sending the default values of the queue for the power control) for EXAMPLE, to ADD a group of setting 'Safe shutdown' to a 'package' and it wire to the Center terminal (Prototype).

• Question about the Manager of messages in queue and dynamically load/close Subvi

  Hi, my dear LV users

  I learn how to use the machine in queue Sate Architecture. I created a simple project, including a "main.vi" to dynamically load a sub vi 'sub_Vi2.vi' in the case of "initialize". The sub vi simply open a configuration file and load affecting some control and write these values in the configuration file. If the configuration file is not created, the sub vi creates until the user closes the Subvi.

  In the case of "Get out" of my "main.vi", I send 'true' to the Subvi stop button to stop running it. But the sub vi did not write these values back to the configuration file, or created a new when I delete the configuration file.

  There is another vi I made 'main1.vi', which loads dynamically and close the Subvi. And it works as well as I expected: create the file and write data!

  Can someone help me understand the code? I've also attached the front of diagrams and source code. It's in 2012 LV.

  Best regards

  Li CQ

  
  

• Connection of door AND dynamic data

  The program compares a thermocouple readings to a constant. The superiors are introduced into a door AND exits. However, if one of the inputs can be connected in dynamic data at the port of entry of the door AND. When the same data of the other DAQ is sent, it gives an error. Interchanging the ports also gives the same error.

  Can I use a Boolean Dynamics to the converter so to counteract this? The output of the gate AND then entered the port of exit DAQ.

  Thank you.

  Hello

  try something like the logic shown in the attached photo.

  Let us know if that's what you're looking for.