static and dynamic reports

Similar Questions

• Difference between static and dynamic encryption card

  Anyone tell me the difference between static and dynamic encryption card?

  Hi Rodrigo,

  Public static crypto map - identifies by the peers and traffic to encrypt explicitly. Generally used to host some tunnels with different profiles and characteristics (different partners, sites, location)

  So, when you have the information of the two peers than what policies we're going to use, what is the IP on both devices we normally use static VPN.

  Crypto dynamic map - is one of the ways to accommodate peer sharing the same characteristics (for example, several offices of branches share the same configuration) or peers with dynamic IP addressing (DHCP, etc.)

  For more information, please visit:

  https://supportforums.Cisco.com/document/12013476/crypto-map-based-IPSec...

  Kind regards

  Aditya

  Please evaluate the useful messages and mark the correct answers.

• Using VPN L2L static and dynamic dedicated tunnels

  We have an ASA 5510 running 8.0 at our company headquarters. We have remote sites who need to create VPN L2L at the HQ ASA tunnels. Some remote sites have static IP addresses and others have dynamic IP addresses.

  I found documentation Cisco L2L static IP VPN tunnels and make them work. I found another Cisco documentation for static IP dynamic L2L VPN tunnels using the tunnel-group "DefaultL2LGroup".

  My question is, can you have two types of tunnels on the same ASA L2L? If so, simply by using the definitions of "DefaultL2LGroup" tunnel-group and of tunnel-group work? Is there a reason to not do? Is better technology (ASA HQ and a combination of ASA 5505 and 1861 at remote sites) available?

  Yes, you can have both types of tunnels L2L. If you use a PSK - remember that the IP address of the remote site is used to 'validate' to connect to Headquarters. As long as you use a sure PSK = 64 characters and all with upper/lower case alpha numeric - you should be OK.

  A better way to do it - is to get the static IP addresses for the site that currently have DHCP from ISP.

  HTH >

• Display static and dynamic photo using the Structure of the event

  Hello everyone,

  I need to display a static image with an event and then using another event, I need to keep displaying the second photo, while the first is still displayed. Simply speaking, in the attached example, I would like to have the color circle black fixed while I dynamically change the red circle.

  My attempt is shown in the attached VI with the first approach using the shift register and the second using the property node (value). Both do not work. Does not erase the previous red circle, or the black circle also gets deleted.

  I'd appreciate any help in this regard.

  Thank you

  From what I see here, you must have two shift registers, one for each circle you try to draw.  You just update those who need update inside the corresponding event.  Use then Cancatinate string to combine the two images.

  Other things to note:

  Put the terminals of your controls in their case of discipline.  This ensures that you are using the most recent data instead of the outdated data.

  The Stop button event take the changed value.  Yet once, put the terminal inside the event.  This will allow the latch to work its magic.

  Them would like to see photo subVIs RADIUS be I16 instead of DBL.  I recommend that you change your cursors to use representation I16.

  

• Cisco VPN Site to Site with a static and dynamic does not

  Hello

  I have ASA 5510 in Headquarters with static, IP and ASA 5505 in the remote site behind ADSL router trying to establish VPN, but its failure in phase 1

  Config of the headquarters

  interface Ethernet0/0

  Description link to router LeaseLine

  nameif outside

  security-level 0

  IP x.x.x.x 255.255.255.248

  !

  interface Ethernet0/1

  Description link to LAN internal

  nameif inside

  security-level 100

  IP 172.17.1.15 255.255.255.0

  access extensive list ip 172.17.1.0 inside_nat0_outbound_1 allow 255.255.255.0 172.20.1.0 255.255.255.0

  access extensive list ip 172.17.1.0 inside_nat0_outbound_1 allow 255.255.255.0 172.19.1.0 255.255.255.0

  access extensive list ip 172.17.1.0 vpn_to_remote allow 255.255.255.0 172.19.1.0 255.255.255.0

  extended VPN ip 172.17.1.0 access list allow 255.255.255.0 172.20.1.0 255.255.255.0

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound_1

  NAT (inside) 1 0.0.0.0 0.0.0.0

  Route outside 0.0.0.0 0.0.0.0 x.x.x.x 1

  Crypto ipsec transform-set esp-aes-256-md5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  correspondence address 1 crypto dynamic-map cisco VPN

  Crypto dynamic-map cisco 1 set of transformation-ESP-AES-256-SHA

  card crypto outside_map 10 correspondence address vpn_to_remote

  card crypto outside_map 10 set pfs

  card crypto outside_map 10 peers set y.y.y.y

  card crypto outside_map 10 transform-set esp-aes-256-md5

  outside_map crypto 10 card value reverse-road

  dynamic outside_map 30-isakmp ipsec crypto map Cisco

  outside_map interface card crypto outside

  crypto isakmp identity address

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  aes-256 encryption

  md5 hash

  Group 5

  life 86400

  crypto ISAKMP policy 20

  preshared authentication

  aes encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  Crypto isakmp nat-traversal 20

  tunnel-group y.y.y.y type ipsec-l2l

  tunnel-group ipsec-attributes y.y.y.y

  pre-shared-key *.

  tunnel-group parkplace type ipsec-l2l

  tunnel-group ipsec-attributes parkplace

  pre-shared-key *.

  The Remote Site configuration

  interface Vlan1

  nameif inside

  security-level 100

  address 172.20.1.1 IP 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 192.168.1.2 255.255.255.0

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  ICMP list extended access permit icmp any one

  access-list SHEEP extended ip 172.20.1.0 allow 255.255.255.0 172.17.1.0 255.255.255.0

  extended VPN 172.20.1.0 ip access list allow 255.255.255.0 172.17.1.0 255.255.255.0

  Global 1 interface (outside)

  NAT (inside) 0 access-list SHEEP

  NAT (inside) 1 0.0.0.0 0.0.0.0 outdoors

  Access-group ICMP in interface outside

  Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  crypto map outside_map 1 is the VPN address

  peer set card crypto outside_map 1 83.111.252.242

  card crypto outside_map 1 set of transformation-ESP-AES-256-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  Crypto isakmp nat-traversal 20

  tunnel-group fairmount type ipsec-l2l

  tunnel-group fairmount ipsec-attributes

  pre-shared-key *.

  Best regards / Asfar

  Hello

  Have you tried to replace the names of 'tunnel-group' entry with Ip address on both ends... ?

  Thank you

  MS

• Static and dynamic NAT at the same time?

  Is this possible? Let's say you have 20 public address pool and you have 30 computers LAN. You want to assign the same public address for some of the servers. And the rest can get the addresses of the pool at random.

  It would be nice if we can easily do the appropriate firewall rules.

  Yes, it is possible, you can use nat and global commands for dynamic conversion and use the static commands for static translation at the same time.

  Here is an example:

  Public rate IP-range outdoors: xxx.xxx.xxx.0/27

  (IP addresses are xxx.xxx.xxx.1 - xxx.xxx.xxx.30)

  Private range of IP addresses on the inside: yyy.yyy.yyy.0/24

  In the example I'm going to static translate xxx.xxx.xxx.2 to yyy.yyy.yyy.2 Server1 (ditto for server2, but by using adresse.3)

  All other IP addresses is translated dynamics.

  Here is an example of how you can do this:

  IP address outside xxx.xxx.xxx.1 255.255.255.224

  IP address yyy.yyy.yyy.1 255.255.255.0 inside

  NAT (inside) 0 access-list sheep

  NAT (inside) 1 yyy.yyy.yyy.0 255.255.255.0

  Global 1 interface (outside)

  public static yyy.yyy.yyy.2 xxx.xxx.xxx.2 (indoor, outdoor)

  public static yyy.yyy.yyy.3 xxx.xxx.xxx.3 (indoor, outdoor)

  access-list deny ip host yyy.yyy.yyy.2 sheep all

  access-list deny ip host yyy.yyy.yyy.3 sheep all

  access-list sheep ip allow a whole

  Kind regards

  Leo

• Static and dynamic IP on same machine - linux

  Hello
  
  I installed oracle 11g Linux 5.2 under a machine (gust) VM that resides on Windows 7 (host).
  
  Host machine (windows 7) I want to access the database 11g located on machine (Linux) of comments through PuTTY.
  
  problem that I am facing is, when I use dhcp (automatic ip generated) under the machine burst linux I can able to access computer guest of host through BIMBO02.
  But when I use the static IP address (by dhcp from disconnection, I am not able access to host guest!)
  
  As oracle recommends I use static ip for the configuration database, but I'm not able to access the machine to burst from the host with static ip address.
  
  Is there a way I can access the guest computer to host even when I use the static ip address.
  
  Thanks in advance.
  AB

  IndianDBA wrote:
  I use vmware... and your notes helped me... even though the issue has not been resolved full but got a concept where I can come up with solution

  Thank you very much, Ed.

  Earlier you said "when I started PuTTY using the ip address of host machine (Linux) machine (Windows) to burst error (error: network connection has expired).

  It seems quite the opposite of the configurations of most people. In this architecture, 'host' is actually installed on the physical machine, one on which you have installed VMware itself. The "guest" is the virtual system running under VMware. For most people, this means that the host system is Windows, run on their laptop Desk/computer, and the "guest" is Linux, running as a virtual machine under VMware or VirtualBox.

  But regardless of the foregoing, as you're running under vmware, on the system host (see previous paragraph) will show two network adapters associated with VMware. VMnet1 is to map hostonly and VMnet8 is the NAT map. When I put in place a guest vm under VMware, I take note of the ip address of the adapter VMnet8. In order of explanation, let's say it's 192.168.8.1. So when you set up the configuration of the network on the guest virtual machine, you want to give it an ip address of 192.168.8.n, where n is between 3 and 255. My personal naming convention for my personal VMs is at the end of the name of the server with a 2-digit sequential number (vmlnxsrv01, vmlnxsrv02, etc.). I then use that number as the last two digits of the IP address, from 101. So in the example I just gave, vmlnxsrv01 virtual machine would be given an IP address of 192.168.8.101, and vmlnxsrv02 would be 192.168.8.102.

  In addition, as I have noted in the blog, VMware and Vbox manage differently their networking. Unlike VBox in VMware, I never had to define two network cards. I just used one and it assign an ip address in the subnet of the adapter VMnet8 (NAT). Which filled all the conditions that I have addressed in the blog post, namely:
  1 - the ability to have an ip address sets
  2 - that the ip address is NOT space on the company or the network of the ISP - the device is not visible what anyone outside the host (see the definition in the first paragraph, above).
  3 - the capacity of the virtual machine guest to open access to the internet
  4 - the ability to access resources on the guest virtual machine using the same tools that I use to access the physical servers on my corporate network. And there is not another copy of the tool itself. I mean the same tool. For example, I installed on my desktop, PuTTY to give me a ssh client to access to * nix servers.  In this copy of PuTTY I defined connections to 6 servers in my guests VM Center 4 AND data of company running VMware or VBox on my desk.  My local tnsnames.ora has entries for both my databases AND databases running my Windows VMs.

  Published by: EdStevens on January 17, 2013 06:54

• Difference between the static SQL query and dynamic SQL query.

  Hello
  
  Please explain the fundamental difference between static and dynamic sql queries. Please explain for example.

  Static: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/static.htm
  Dynamics: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e10472/dynamic.htm

• Ice, liquid and dynamic data (modules and applications) - just a suggestion

  Hello!

  It is a position of more suggestion rather than a discussion message. I'm not sure that having placed in the right area, so excuse me if I don't.

  1. I was very happy to work with liquid to display things when a user is logged on and stuff so that it was not. Until I realized that my site in full could not be editable through the ice, because I used all liquid through the site. Liquid is amazing, but it would be more surprising if it can work with ICE. Is this something BC have in mind for future versions?

  2. it would be so great that ICE would allow my clients to edit blog, products, applications, and data FAQ. I think you must have a glance, that Webflow people do with their CMS. Their CMS allows people to change static and dynamic content with an interface similar to ice BC plans to implement a similar feature in the future?

  Thanks for reading this,

  Diego.

  While BC is working better and more recent versions of ice and I'm sure will better work with the new features of British Colombia as a liquid, due to the nature of the liquid and the coding side Server with conditional statements and complex solutions, you can create - with ice you can pretty well bet that he used to be able to support what your specifically ask in all cases. Keep this in mind.

  With more capacity edit on other things - I am course will be in future versions.

• Cisco ASA and dynamic VPN L2L Fortigate configuration

  I met a problem recently with an ASA 5510 (7.0) and a bunch of Fortigate 50 (3.0 MR7). The ASA is the hub and Fortigates are rays with a dynamic public IP.

  I followed this document on the site Web of Cisco (http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805733df.shtml) to set up my ASA and the parameters passed to my counterparts to set up their Fortigates.

  However, the ASA journal reveals that attemtps Fortigate connection always tried with DefaultRAGroup before falling back to DefaultL2LGroup and finally died. Experience with putting in place a dynamic VPN between Cisco and Fortigate someone? Which could not fail at each end? Here's a typical piece of error log ASA. The ASA is currently having a static VPN tunnel and a site-2-client VPN in two groups by default.

  6. January 10, 2011 20:58:45 | 713905: Group DefaultL2LGroup, IP = 116.230.243.205, P1 = relay msg sent to the WSF MM
  5. January 10, 2011 20:58:45 | 713201: Group = DefaultL2LGroup, IP = 116.230.243.205, in double Phase 1 detected package.  Retransmit the last packet.
  6. January 10, 2011 20:58:45 | 713905: Group DefaultL2LGroup, IP = 116.230.243.205, P1 = relay msg sent to the WSF MM
  5. January 10, 2011 20:58:45 | 713201: Group = DefaultL2LGroup, IP = 116.230.243.205, in double Phase 1 detected package.  Retransmit the last packet.
  6. January 10, 2011 20:58:41 | 713905: Group DefaultL2LGroup, IP = 116.230.243.205, P1 = relay msg sent to the WSF MM
  5. January 10, 2011 20:58:41 | 713201: Group = DefaultL2LGroup, IP = 116.230.243.205, in double Phase 1 detected package.  Retransmit the last packet.
  4. January 10, 2011 20:58:39 | 713903: Group = DefaultL2LGroup, IP = 116.230.243.205, ERROR, had decrypt packets, probably due to problems not match pre-shared key.  Abandonment
  5. January 10, 2011 20:58:39 | 713904: Group = DefaultL2LGroup, IP = 116.230.243.205, received the package of Mode main Oakley encrypted with invalid payloads, MessID = 0
  6. January 10, 2011 20:58:39 | 713905: Group = DefaultRAGroup, IP = 116.230.243.205, WARNING, had decrypt packets, probably due to problems not match pre-shared key.  User switching to the tunnel-group: DefaultL2LGroup
  5. January 10, 2011 20:58:39 | 713904: Group = DefaultRAGroup, IP = 116.230.243.205, received the package of Mode main Oakley encrypted with invalid payloads, MessID = 0
  4. January 10, 2011 20:58:33 | 713903: Group = DefaultRAGroup, IP = 116.230.243.205, error: cannot delete PeerTblEntry
  3. January 10, 2011 20:58:33 | 713902: Group = DefaultRAGroup, IP = 116.230.243.205, Removing peer to peer table has no, no match!
  6. January 10, 2011 20:58:33 | 713905: Group DefaultRAGroup, IP = 116.230.243.205, P1 = relay msg sent to the WSF MM
  5. January 10, 2011 20:58:33 | 713201: Group = DefaultRAGroup, IP = 116.230.243.205, in double Phase 1 detected package.  Retransmit the last packet.
  6. January 10, 2011 20:58:25 | 713905: Group DefaultRAGroup, IP = 116.230.243.205, P1 = relay msg sent to the WSF MM
  5. January 10, 2011 20:58:25 | 713201: Group = DefaultRAGroup, IP = 116.230.243.205, in double Phase 1 detected package.  Retransmit the last packet.
  6. January 10, 2011 20:58:21 | 713905: Group DefaultRAGroup, IP = 116.230.243.205, P1 = relay msg sent to the WSF MM
  5. January 10, 2011 20:58:21 | 713201: Group = DefaultRAGroup, IP = 116.230.243.205, in double Phase 1 detected package.  Retransmit the last packet.
  5. January 10, 2011 20:58:19 | 713904: IP = 116.230.243.205, encrypted packet received with any HIS correspondent, drop

  Yes, sounds about right. He will try to match with the DefaultRAGroup first, and when you know that it's a dynamic IPSec in LAN-to-LAN, it will be

  then back to the DefaultL2LGroup, because he doesn't know if the VPN Client or L2L again when he is contacted fist as they are connecting from dynamic IP peer.

  You must ensure that your L2L tunnel-group by default has been configured with the corresponding pre-shared key.

  Assuming that you have configured the dynamic map and assign to the card encryption.

  Here is an example of configuration where ASA has a static and peripheral ip address pair has dynamic IP:

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a00807ea936.shtml

  Hope that helps.

• How to do a partial update of a form and a report on the same page?

  Hi all

  Im trying to make a page where you have a report on the top, and when you click on the link instead go to the form page, the form on the page is on the bottom of the report. Let's say that im trying to send an id from the report to the item below so that I could go get the rest of the element. However when I pass, other elements would still refer to it as null.

  If I am not wrong it could be done with the quote, but I want it to be partial refresh...

  I tried the steps detailed here, but it didn't work when the lower part is an also a report:

  https://forums.Oracle.com/thread/2345863

  I also tried, but this actually submits a page...

  Base Oracle: Tutorial Apex - form & amp; Report shares the same page

  would it not possible to get a form and a report in a partial refresh page?

  Post edited by: T101_cyberdyne

  Hello

  Do you mean something like this:

  http://Apex.Oracle.com/pls/Apex/f?p=vincentdeelen:26:26

  If so, you must create a dynamic action with a javascript action to set the id of the report line in the form of code field and further action from pl/sql to retrieve the record based on the identification number. You can use this record to set the shape of other items in the field.

  For the example in the link above, the code is as follows.

  action of javascript:

  var empno = $(this.triggeringElement).find('td[headers="EMPNO"]').text)

  $s ('P26_EMPNO', empno)

  action of PL/SQL:

  declare

  cursor c_emp is

  Select * from EMP

  where empno =: p26_EMPNO;

  BEGIN

  for r_emp looping c_emp

  APEX_UTIL. SET_SESSION_STATE ('P26_ENAME', r_emp.ename);

  APEX_UTIL. SET_SESSION_STATE ('P26_JOB', r_emp.job);

  APEX_UTIL. SET_SESSION_STATE ('P26_MGR', r_emp.mgr);

  APEX_UTIL. SET_SESSION_STATE ('P26_HIREDATE', to_char (r_emp. HireDate, 'dd-mon-yyyy'));

  APEX_UTIL. SET_SESSION_STATE ('P26_SAL', r_emp. SAL);

  APEX_UTIL. SET_SESSION_STATE ('P26_COMM', r_emp.comm);

  APEX_UTIL. SET_SESSION_STATE ('P26_DEPTNO', r_emp. DEPTNO);

  APEX_UTIL. SET_SESSION_STATE ('P26_ORDNO', r_emp.ordno);

  end loop;

  END;

  Make sure you list the item id in the field "Page of Items to submit" and ALL your form elements in the field "Page of Items of return" as follows:

  http://www.vincentdeelen.com/images/OTN/plsql_action.PNG

  A screenshot of the configuration of dynamic action:

  http://www.vincentdeelen.com/images/OTN/dynamic_action.PNG

  Kind regards

  Vincent

• Difference between dynamic and dynamic routing issue

  Hello
  
  Can someone let me know the difference between dynamic routing and dynamic publishing in the oracle service bus
  
  Thank you
  Barro

  Hello

  If the outgoing end point is not static or Exchange with the incoming request again for dynamic actions...

  Routing is used for calls for installation (who have asked and answer) that is routing action awaits the response before going to the pipeline of response
  Publish is used for asynchronous calls (which does not hv any answer).

  See you soon,.
  Afonso Gupta

• Determine if the form is a form PDF static or dynamic XML form programmatically

  Hello

  We have a software Macromedia Adobe form is used. With Adobe LiveCycle Designer, Staic form PDF and dynamic XML form can be created. We want to make the distinction between these two types. Is there available Adobe API which returns the type of PDF form; Static PDF or XML dynamic form?

  Thank you - Marie Laure

  Your script does not for me but when I used this modified following version he detected the form correctly (as long as the pdf file is saved in the designer using either save as static or save as dynamic)

  Dim app, pddoc
  Dim js
  
  Set app = CreateObject("AcroExch.App")
  Set pddoc = CreateObject("AcroExch.PDDoc")
  
  If pddoc.Open("E:\Untitled1.pdf") Then
       Set js = pddoc.GetJSObject
  
       If Not js Is Nothing Then
            If js.dynamicXFAForm Then
                MsgBox "It's a dynamic form!"
            Else
                MsgBox "It's a static form!"
            End If
         End If
  End If
  
  Set app = Nothing
  Set pddoc = Nothing
  

  Regarding the 2nd approah, I don't have a sample that can be shared, but essentially, it is to use API of COS calls to open the stream XFA in PDF and determine what type of rendering.

  Alternatively, you can run javascript using the API / C code

• Cannot simultaneously use vector art and dynamic forms?

  I was responsible for creating an online order form, and it seems that beign able to use vector graphics is the key to the design of the form. Dynamic form elements are also absolutely necessary - all the information has to fit on one page (and fortunately, most are mutually exclusive, allowing only the fields necessary to appear).

  Unfortunately, when I do a page of the form layout in Illustrator and import it into LiveCycle, I seem to be unable to use the drawing tools (specifically, lines and text, that both I need). I tried to save the file in a dynamic form, but only the opportunity to save it as a static form is displayed.

  Y at - it something I am doing wrong, or I'm going to have to choose between the use of vector graphics and dynamic form options?

  Fix. You can import the static PDF file work and then add the form objects.

  Steve

• Dynamic report with LOV SelectLists

  I like to create a dynamic report with Select-Lists(LOV based).
  
  My Source (according to PL/SQL returning SQL query) region:

  declare
    q varchar2(4000);
  begin
   
    q := 'SELECT R_ID, R_TSO_NO';
  
    For i in (SELECT * FROM USER_TAB_COLUMNS
    WHERE table_name = 'TAB_REPORTS'
    AND column_name like '2%')
    loop
      q := q || ', ';
      q := q || 'HTMLDB_ITEM.SELECT_LIST(1, ';
      q := q || i.column_name;
      q := q || ', ';
      q := q || chr(39);
      q := q || 'LOV_QER';
      q := q || chr(39);
      q := q || ', null, ';
      q := q || chr(39);
      q := q || 'Y';
      q := q || chr(39);
      q := q || ') "';
      q := q || i.column_name;
      q := q || '"';
    end loop;
     
    q := q || ' FROM TAB_REPORTS ';
  
    return q;
  
  END;

  This is the return value, which seems to be OK:

  SELECT R_ID, 
  R_TSO_NO, 
  HTMLDB_ITEM.SELECT_LIST(1, 2008_05, 'LOV_QER', null, 'Y') "2008_05", 
  HTMLDB_ITEM.SELECT_LIST(1, 2008_03, 'LOV_QER', null, 'Y') "2008_03", 
  HTMLDB_ITEM.SELECT_LIST(1, 2008_08, 'LOV_QER', null, 'Y') "2008_08", 
  HTMLDB_ITEM.SELECT_LIST(1, 2008_11, 'LOV_QER', null, 'Y') "2008_11", 
  HTMLDB_ITEM.SELECT_LIST(1, 2009_02, 'LOV_QER', null, 'Y') "2009_02", 
  HTMLDB_ITEM.SELECT_LIST(1, 2009_05, 'LOV_QER', null, 'Y') "2009_05", 
  HTMLDB_ITEM.SELECT_LIST(1, 2009_08, 'LOV_QER', null, 'Y') "2009_08", 
  HTMLDB_ITEM.SELECT_LIST(1, 2009_11, 'LOV_QER', null, 'Y') "2009_11", 
  HTMLDB_ITEM.SELECT_LIST(1, 2010_02, 'LOV_QER', null, 'Y') "2010_02", 
  HTMLDB_ITEM.SELECT_LIST(1, 2010_05, 'LOV_QER', null, 'Y') "2010_05", 
  HTMLDB_ITEM.SELECT_LIST(1, 2010_08, 'LOV_QER', null, 'Y') "2010_08", 
  HTMLDB_ITEM.SELECT_LIST(1, 2010_11, 'LOV_QER', null, 'Y') "2010_11" 
  FROM TAB_REPORTS

  And this is my error msg, I do not understand:
  
  * Failed to parse the SQL query:
  ORA-00911: invalid character *.
  
  Where is this invalid character, please?
  
  THX 4 help,
  Chris

  Hello

  As part of HTMLDB_ITEM. This is a parameter of function - it should be a tank. In addition, if you use a recent version of the APEX, you should use the synonym APEX_ITEM reference HTMLDB_ITEM.

  Here is the statement of HTMLDB_ITEM parameter. SELECT_LIST...

      p_idx         in number,
      p_value       in varchar2 default null,
      p_list_values in varchar2 default null,
      p_attributes  in varchar2 default null,
      p_show_null   in varchar2 default 'NO',
      p_null_value  in varchar2 default '%null%',
      p_null_text   in varchar2 default '%',
      p_item_id     in varchar2 default null,
      p_item_label  in varchar2 default null,
      p_show_extra  in varchar2 default 'YES'
  

  You will see that it is a VARCHAR2 parameter.

  See you soon

  Ben